Diff: main_def.h

Revision:

0:6a895c900427

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main_def.h	Mon Apr 15 10:20:43 2019 +0000
@@ -0,0 +1,81 @@
+/*****************************************************************************
+    main_def.h
+
+    Copyright (C) 2013 LAPIS Semiconductor Co., Ltd.
+    All rights reserved.
+
+    LAPIS Semiconductor shall not be liable for any direct, indirect, 
+    consequential or incidental damages arising from using or modifying this 
+    program.
+
+    History
+    2013.02.20  ver.3.00
+    2012.11.20  ver.2.00
+    2012.09.13  ver.1.00
+******************************************************************************/
+#ifndef _MAIN_DEF_H_
+#define _MAIN_DEF_H_
+
+#define CELL_NUM_MAX                    (16u)
+#define THERMISTOR_NUM_MAX              (8u)
+#define T_END                           (85u+40u+1u)
+
+
+#define SET_FLAG        (0x01u)
+#define CLR_FLAG        (0x00u)
+
+#define ST_NORMAL                       (0x0000u)
+#define ST_OVRCHRG_VOL                  (0x0001u)
+#define ST_OVRDISCHRG_VOL               (0x0002u)
+#define ST_OVRCHRG_DISCHRG_VOL          (0x0004u)
+#define ST_SHORT_CUR                    (0x0008u)
+
+#define ST_CHRG_CUR                     (0x0010u)
+#define ST_DISCHRG_CUR                  (0x0020u)
+#define ST_OVRCHRG_CUR                  (0x0040u)
+#define ST_OVRDISCHRG_CUR               (0x0080u)
+
+#define ST_TOTAL_CHRG                   (0x0100u)
+#define ST_CELLDIFF_CHRG                (0x0200u)
+#define ST_PSAVE                        (0x0400u)
+#define ST_PDOWN                        (0x0800u)
+
+#define ST_UDR_TEMPE_CHRG               (0x1000u)
+#define ST_UDR_TEMPE_DISCHRG            (0x2000u)
+#define ST_OVR_TEMPE_CHRG               (0x4000u)
+#define ST_OVR_TEMPE_DISCHRG            (0x8000u)
+#define ST_TEMPE_DETECT                 (ST_OVR_TEMPE_DISCHRG|ST_UDR_TEMPE_DISCHRG)
+
+#define UART_SEND_BUF_SZ                (40u)
+
+#define STX (0x02u)
+
+#define MAIN_R_OK               (0)
+#define MAIN_R_ERR_PARAM        (-1)
+
+#define MAIN_EEPROM_ADR         (0x0200u)   //Top Addr
+#define MAIN_EEPROM_SIZE        (0x0060u)   //size of one data
+#define MAIN_EEPROM_TIMES_ADR   (0x002Cu)   //Times Addr
+#define MAIN_EEPROM_ENERGY_ADR  (0x0058u)   //Enegy Addr
+#define MAIN_EEPROM_PAGE_SIZE   (10u)
+
+#define GAIN10_SUB          (1u)            //(Vim1-Vim0)/VR-0.1
+#define GAIN50_SUB          (5u)            //(Vim1-Vim0)/VR-0.5
+#define GAIN10F             (100u-GAIN10_SUB)           //x10(Fixed)-0.1
+#define GAIN50F             (500u-GAIN50_SUB)           //x50(Fixed)-0.5
+
+#define ST_EEP_ABNRDATA     (2u)
+#define ST_EEP_ALL_ERASE    (1u)
+#define ST_EEP_OK           (0u)
+
+#define EEP_INS_ABNRDATA        ((unsigned char*)"x")
+#define EEP_INS_ALL_ERASE       ((unsigned char*)"y")
+#define EEP_INS_OK              ((unsigned char*)"z")                           //CopyParamEEPROM()= EEP_R_NODATA, EEP_R_DATADIFF, EEP_ALL_ERASE
+
+//using drv_ctrl_flag
+#define DRVST_ON_BIT    (0x80u)
+#define DRVST_OFF_BIT   (0x40u)
+
+#define VREF_VAL            (3300u)
+
+#endif /*_MAIN_DEF_H_*/
\ No newline at end of file