Example code of sakura.io Evaluation board.
Dependencies: AQM0802A BME280 MPU9250_SPI SakuraIO gps mbed
SakuraIo Evaluation Board Standard
Overview
This program is example code of sakura.io Evaluation board.
Functions
- Periodic measure from onboard sensors(period is 200ms)
- Motion sensor(gyro, accelometer, magnetometer)
- Environment sensor(temperatur, humidity, airpressur)
- GPS(longitude, latitude, timestamp)
- Periodic send the measuring datas to sakura.io platform(period is 300sec)
- Output the measured datas output to USB-Serial port
- baudrate is 9600bps
- Can select on / off of periodic running with switch `SW5`
Description
See the Getting Started page.
README.md
- Committer:
- Fuminori OKUHARA
- Date:
- 2018-08-01
- Revision:
- 7:b5d2aeda9628
File content as of revision 7:b5d2aeda9628:
# SakuraIo Evaluation Board Standard ## Overview This program is example code of [sakura.io Evalaution board](https://os.mbed.com/platforms/SAKURAIO_EVB_01/). ### Functions - Periodic measure from onboard sensors(period is 200ms) - Motion sensor(gyro, accelometer, magnetometer) - Environment sensor(temperatur, humidity, airpressur) - GPS(longitude, latitude, timestamp) - Periodic send the measuring datas to sakura.io platform(period is 300sec) - Output the measured datas output to USB-Serial port - baudrate is 9600bps - Can select on / off of periodic running with switch `SW5` ## Description See the [Getting Started](https://github.com/sakuraio/SakuraIO_Evaluation_Board_Standard/wiki/GettingStarted) page.