Rohm / Mbed OS rohm-tileshield-6sensor-demo

Demo application of reading 6 different sensors and outputting values on UART. This demo can be used with Rohm tileshield using tiles for BH1726, BD1020, RPR0521, BH1745, ML8511 and BD7411. Developed and tested using Renesas GR-Peach -board.

Dependencies:   rohm-bh1726 rohm-bh1745 rohm-rpr0521 rohm-sensor-hal

Fork of rohm-bd7411g-hello by Rohm

main.cpp@12:18c2160813c6, 2016-09-19 (annotated)

Committer:
MikkoZ
Date:
Mon Sep 19 10:07:15 2016 +0000
Revision:
12:18c2160813c6
Parent:
8:bb09890333fe
Child:
13:69b1b8cadb78
Rohm BD7411g Omnipolar Detection Hall IC hello world initial version.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Jonathan Austin 0:2757d7abb7d9 1 #include "mbed.h"
Jonathan Austin 0:2757d7abb7d9 2
Jonathan Austin 0:2757d7abb7d9 3 DigitalOut led1(LED1);
MikkoZ 12:18c2160813c6 4 //Edit input pin setup according to where hall sensor is connected
MikkoZ 12:18c2160813c6 5 //(USER_BUTTON0 for button on GR-PEACH)
MikkoZ 12:18c2160813c6 6 DigitalIn hall_sensor(USER_BUTTON0);
MikkoZ 12:18c2160813c6 7 Serial pc(USBTX, USBRX);
Jonathan Austin 0:2757d7abb7d9 8
Jonathan Austin 1:846c97078558 9 // main() runs in its own thread in the OS
Jonathan Austin 1:846c97078558 10 // (note the calls to Thread::wait below for delays)
Jonathan Austin 0:2757d7abb7d9 11 int main() {
MikkoZ 12:18c2160813c6 12 pc.printf("\n\r");
MikkoZ 12:18c2160813c6 13 pc.printf("BD7411G Hall sensor example application.\r\n");
MikkoZ 12:18c2160813c6 14 pc.printf("Led on board will change ON/OFF according to magnet detection. \n\r");
MikkoZ 12:18c2160813c6 15
Jonathan Austin 0:2757d7abb7d9 16 while (true) {
MikkoZ 12:18c2160813c6 17 led1 = hall_sensor;
MikkoZ 12:18c2160813c6 18 Thread::wait(100);
Jonathan Austin 0:2757d7abb7d9 19 }
Jonathan Austin 0:2757d7abb7d9 20 }
Jonathan Austin 1:846c97078558 21