Getting Started with Rohm SensorShield-EVK-001

This example demonstrates how to use the SensorShield-EVK-001 component with multiple sensors. those measured values, which received through a serial connection from a mbed board, are printed out in a terminal software window.

Setup

/media/uploads/edamame22/img_5218.jpg

The SensorShield-EVK-001 is plugged on top of a mbed board and a serial connection should be set up between the mbed board and PC with the following parameters:

baud rate: 115200
data: 8 bit
parity: none
stop: 1bit
flow control: none

Terminal parameters

/media/uploads/edamame22/serial_port_setup.png /media/uploads/edamame22/terminal_setup.png

Measured Data Output

/media/uploads/edamame22/data_output_2.png

Diff: mbed-os.lib

Revision:: 0:a9aeed8cd62e

diff -r 000000000000 -r a9aeed8cd62e mbed-os.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-os.lib	Mon Feb 18 15:08:30 2019 +0900
@@ -0,0 +1,1 @@
+https://github.com/ARMmbed/mbed-os/#ecb3c8c837162c73537bd0f3592c6e2a42994045