mbed-src updated for BMD-200 evaluation board. Just pin numbers are updated.
Dependents: mbed_blinky-bmd-200 bmd-200_accel_demo firstRig
Fork of mbed-src by
Replacement for the "mbed" or "mbed-src" library when using the BMD-200 Evaluation kit. This library only remaps the pin names (i.e. LED1 points to p0.01 instead of p0.18, etc) as used by the BMD-200 Evaluation board (select the nRF51822_mkit platform). All other code is untouched.
cpp/Serial.h@2:143cac498751, 2013-02-18 (annotated)
- Committer:
- emilmont
- Date:
- Mon Feb 18 11:44:18 2013 +0000
- Revision:
- 2:143cac498751
- Parent:
- 0:fd0d7bdfcdc2
Update mbed sources to Rev 59
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
mbed_official | 0:fd0d7bdfcdc2 | 1 | /* mbed Microcontroller Library |
emilmont | 2:143cac498751 | 2 | * Copyright (c) 2006-2013 ARM Limited |
mbed_official | 0:fd0d7bdfcdc2 | 3 | * |
emilmont | 2:143cac498751 | 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
emilmont | 2:143cac498751 | 5 | * you may not use this file except in compliance with the License. |
emilmont | 2:143cac498751 | 6 | * You may obtain a copy of the License at |
mbed_official | 0:fd0d7bdfcdc2 | 7 | * |
emilmont | 2:143cac498751 | 8 | * http://www.apache.org/licenses/LICENSE-2.0 |
mbed_official | 0:fd0d7bdfcdc2 | 9 | * |
emilmont | 2:143cac498751 | 10 | * Unless required by applicable law or agreed to in writing, software |
emilmont | 2:143cac498751 | 11 | * distributed under the License is distributed on an "AS IS" BASIS, |
emilmont | 2:143cac498751 | 12 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
emilmont | 2:143cac498751 | 13 | * See the License for the specific language governing permissions and |
emilmont | 2:143cac498751 | 14 | * limitations under the License. |
mbed_official | 0:fd0d7bdfcdc2 | 15 | */ |
mbed_official | 0:fd0d7bdfcdc2 | 16 | #ifndef MBED_SERIAL_H |
mbed_official | 0:fd0d7bdfcdc2 | 17 | #define MBED_SERIAL_H |
mbed_official | 0:fd0d7bdfcdc2 | 18 | |
mbed_official | 0:fd0d7bdfcdc2 | 19 | #include "platform.h" |
mbed_official | 0:fd0d7bdfcdc2 | 20 | |
mbed_official | 0:fd0d7bdfcdc2 | 21 | #if DEVICE_SERIAL |
mbed_official | 0:fd0d7bdfcdc2 | 22 | |
mbed_official | 0:fd0d7bdfcdc2 | 23 | #include "Stream.h" |
mbed_official | 0:fd0d7bdfcdc2 | 24 | #include "FunctionPointer.h" |
mbed_official | 0:fd0d7bdfcdc2 | 25 | #include "serial_api.h" |
mbed_official | 0:fd0d7bdfcdc2 | 26 | |
mbed_official | 0:fd0d7bdfcdc2 | 27 | namespace mbed { |
mbed_official | 0:fd0d7bdfcdc2 | 28 | |
mbed_official | 0:fd0d7bdfcdc2 | 29 | /** A serial port (UART) for communication with other serial devices |
mbed_official | 0:fd0d7bdfcdc2 | 30 | * |
emilmont | 2:143cac498751 | 31 | * Can be used for Full Duplex communication, or Simplex by specifying |
mbed_official | 0:fd0d7bdfcdc2 | 32 | * one pin as NC (Not Connected) |
mbed_official | 0:fd0d7bdfcdc2 | 33 | * |
mbed_official | 0:fd0d7bdfcdc2 | 34 | * Example: |
mbed_official | 0:fd0d7bdfcdc2 | 35 | * @code |
mbed_official | 0:fd0d7bdfcdc2 | 36 | * // Print "Hello World" to the PC |
mbed_official | 0:fd0d7bdfcdc2 | 37 | * |
mbed_official | 0:fd0d7bdfcdc2 | 38 | * #include "mbed.h" |
mbed_official | 0:fd0d7bdfcdc2 | 39 | * |
mbed_official | 0:fd0d7bdfcdc2 | 40 | * Serial pc(USBTX, USBRX); |
mbed_official | 0:fd0d7bdfcdc2 | 41 | * |
mbed_official | 0:fd0d7bdfcdc2 | 42 | * int main() { |
mbed_official | 0:fd0d7bdfcdc2 | 43 | * pc.printf("Hello World\n"); |
mbed_official | 0:fd0d7bdfcdc2 | 44 | * } |
mbed_official | 0:fd0d7bdfcdc2 | 45 | * @endcode |
mbed_official | 0:fd0d7bdfcdc2 | 46 | */ |
mbed_official | 0:fd0d7bdfcdc2 | 47 | class Serial : public Stream { |
mbed_official | 0:fd0d7bdfcdc2 | 48 | |
mbed_official | 0:fd0d7bdfcdc2 | 49 | public: |
mbed_official | 0:fd0d7bdfcdc2 | 50 | /** Create a Serial port, connected to the specified transmit and receive pins |
mbed_official | 0:fd0d7bdfcdc2 | 51 | * |
emilmont | 2:143cac498751 | 52 | * @param tx Transmit pin |
mbed_official | 0:fd0d7bdfcdc2 | 53 | * @param rx Receive pin |
mbed_official | 0:fd0d7bdfcdc2 | 54 | * |
mbed_official | 0:fd0d7bdfcdc2 | 55 | * @note |
mbed_official | 0:fd0d7bdfcdc2 | 56 | * Either tx or rx may be specified as NC if unused |
mbed_official | 0:fd0d7bdfcdc2 | 57 | */ |
emilmont | 2:143cac498751 | 58 | Serial(PinName tx, PinName rx, const char *name=NULL); |
mbed_official | 0:fd0d7bdfcdc2 | 59 | |
mbed_official | 0:fd0d7bdfcdc2 | 60 | /** Set the baud rate of the serial port |
emilmont | 2:143cac498751 | 61 | * |
mbed_official | 0:fd0d7bdfcdc2 | 62 | * @param baudrate The baudrate of the serial port (default = 9600). |
mbed_official | 0:fd0d7bdfcdc2 | 63 | */ |
emilmont | 2:143cac498751 | 64 | void baud(int baudrate); |
emilmont | 2:143cac498751 | 65 | |
emilmont | 2:143cac498751 | 66 | enum Parity { |
emilmont | 2:143cac498751 | 67 | None = 0, |
emilmont | 2:143cac498751 | 68 | Odd, |
emilmont | 2:143cac498751 | 69 | Even, |
emilmont | 2:143cac498751 | 70 | Forced1, |
emilmont | 2:143cac498751 | 71 | Forced0 |
emilmont | 2:143cac498751 | 72 | }; |
emilmont | 2:143cac498751 | 73 | |
emilmont | 2:143cac498751 | 74 | enum IrqType { |
emilmont | 2:143cac498751 | 75 | RxIrq = 0, |
emilmont | 2:143cac498751 | 76 | TxIrq |
emilmont | 2:143cac498751 | 77 | }; |
mbed_official | 0:fd0d7bdfcdc2 | 78 | |
mbed_official | 0:fd0d7bdfcdc2 | 79 | /** Set the transmission format used by the Serial port |
mbed_official | 0:fd0d7bdfcdc2 | 80 | * |
mbed_official | 0:fd0d7bdfcdc2 | 81 | * @param bits The number of bits in a word (5-8; default = 8) |
mbed_official | 0:fd0d7bdfcdc2 | 82 | * @param parity The parity used (Serial::None, Serial::Odd, Serial::Even, Serial::Forced1, Serial::Forced0; default = Serial::None) |
mbed_official | 0:fd0d7bdfcdc2 | 83 | * @param stop The number of stop bits (1 or 2; default = 1) |
mbed_official | 0:fd0d7bdfcdc2 | 84 | */ |
emilmont | 2:143cac498751 | 85 | void format(int bits = 8, Parity parity=Serial::None, int stop_bits=1); |
mbed_official | 0:fd0d7bdfcdc2 | 86 | |
mbed_official | 0:fd0d7bdfcdc2 | 87 | /** Determine if there is a character available to read |
mbed_official | 0:fd0d7bdfcdc2 | 88 | * |
mbed_official | 0:fd0d7bdfcdc2 | 89 | * @returns |
mbed_official | 0:fd0d7bdfcdc2 | 90 | * 1 if there is a character available to read, |
mbed_official | 0:fd0d7bdfcdc2 | 91 | * 0 otherwise |
mbed_official | 0:fd0d7bdfcdc2 | 92 | */ |
emilmont | 2:143cac498751 | 93 | int readable(); |
mbed_official | 0:fd0d7bdfcdc2 | 94 | |
mbed_official | 0:fd0d7bdfcdc2 | 95 | /** Determine if there is space available to write a character |
emilmont | 2:143cac498751 | 96 | * |
mbed_official | 0:fd0d7bdfcdc2 | 97 | * @returns |
mbed_official | 0:fd0d7bdfcdc2 | 98 | * 1 if there is space to write a character, |
mbed_official | 0:fd0d7bdfcdc2 | 99 | * 0 otherwise |
mbed_official | 0:fd0d7bdfcdc2 | 100 | */ |
emilmont | 2:143cac498751 | 101 | int writeable(); |
mbed_official | 0:fd0d7bdfcdc2 | 102 | |
mbed_official | 0:fd0d7bdfcdc2 | 103 | /** Attach a function to call whenever a serial interrupt is generated |
mbed_official | 0:fd0d7bdfcdc2 | 104 | * |
mbed_official | 0:fd0d7bdfcdc2 | 105 | * @param fptr A pointer to a void function, or 0 to set as none |
mbed_official | 0:fd0d7bdfcdc2 | 106 | * @param type Which serial interrupt to attach the member function to (Seriall::RxIrq for receive, TxIrq for transmit buffer empty) |
mbed_official | 0:fd0d7bdfcdc2 | 107 | */ |
emilmont | 2:143cac498751 | 108 | void attach(void (*fptr)(void), IrqType type=RxIrq); |
mbed_official | 0:fd0d7bdfcdc2 | 109 | |
mbed_official | 0:fd0d7bdfcdc2 | 110 | /** Attach a member function to call whenever a serial interrupt is generated |
emilmont | 2:143cac498751 | 111 | * |
mbed_official | 0:fd0d7bdfcdc2 | 112 | * @param tptr pointer to the object to call the member function on |
mbed_official | 0:fd0d7bdfcdc2 | 113 | * @param mptr pointer to the member function to be called |
mbed_official | 0:fd0d7bdfcdc2 | 114 | * @param type Which serial interrupt to attach the member function to (Seriall::RxIrq for receive, TxIrq for transmit buffer empty) |
mbed_official | 0:fd0d7bdfcdc2 | 115 | */ |
mbed_official | 0:fd0d7bdfcdc2 | 116 | template<typename T> |
emilmont | 2:143cac498751 | 117 | void attach(T* tptr, void (T::*mptr)(void), IrqType type=RxIrq) { |
mbed_official | 0:fd0d7bdfcdc2 | 118 | if((mptr != NULL) && (tptr != NULL)) { |
mbed_official | 0:fd0d7bdfcdc2 | 119 | _irq[type].attach(tptr, mptr); |
emilmont | 2:143cac498751 | 120 | serial_irq_set(&_serial, (SerialIrq)type, 1); |
mbed_official | 0:fd0d7bdfcdc2 | 121 | } |
mbed_official | 0:fd0d7bdfcdc2 | 122 | } |
mbed_official | 0:fd0d7bdfcdc2 | 123 | |
emilmont | 2:143cac498751 | 124 | static void _irq_handler(uint32_t id, SerialIrq irq_type); |
emilmont | 2:143cac498751 | 125 | |
mbed_official | 0:fd0d7bdfcdc2 | 126 | protected: |
emilmont | 2:143cac498751 | 127 | virtual int _getc(); |
emilmont | 2:143cac498751 | 128 | virtual int _putc(int c); |
emilmont | 2:143cac498751 | 129 | |
emilmont | 2:143cac498751 | 130 | serial_t _serial; |
mbed_official | 0:fd0d7bdfcdc2 | 131 | FunctionPointer _irq[2]; |
mbed_official | 0:fd0d7bdfcdc2 | 132 | }; |
mbed_official | 0:fd0d7bdfcdc2 | 133 | |
mbed_official | 0:fd0d7bdfcdc2 | 134 | } // namespace mbed |
mbed_official | 0:fd0d7bdfcdc2 | 135 | |
mbed_official | 0:fd0d7bdfcdc2 | 136 | #endif |
mbed_official | 0:fd0d7bdfcdc2 | 137 | |
mbed_official | 0:fd0d7bdfcdc2 | 138 | #endif |