Renesas
openCV library for Renesas RZ/A
Dependents: RZ_A2M_Mbed_samples
Diff: include/opencv2/core/persistence.hpp
- Revision:
- 0:0e0631af0305
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/include/opencv2/core/persistence.hpp Fri Jan 29 04:53:38 2021 +0000
@@ -0,0 +1,1274 @@
+/*M///////////////////////////////////////////////////////////////////////////////////////
+//
+// IMPORTANT: READ BEFORE DOWNLOADING, COPYING, INSTALLING OR USING.
+//
+// By downloading, copying, installing or using the software you agree to this license.
+// If you do not agree to this license, do not download, install,
+// copy or use the software.
+//
+//
+// License Agreement
+// For Open Source Computer Vision Library
+//
+// Copyright (C) 2000-2008, Intel Corporation, all rights reserved.
+// Copyright (C) 2009, Willow Garage Inc., all rights reserved.
+// Copyright (C) 2013, OpenCV Foundation, all rights reserved.
+// Third party copyrights are property of their respective owners.
+//
+// Redistribution and use in source and binary forms, with or without modification,
+// are permitted provided that the following conditions are met:
+//
+// * Redistribution's of source code must retain the above copyright notice,
+// this list of conditions and the following disclaimer.
+//
+// * Redistribution's in binary form must reproduce the above copyright notice,
+// this list of conditions and the following disclaimer in the documentation
+// and/or other materials provided with the distribution.
+//
+// * The name of the copyright holders may not be used to endorse or promote products
+// derived from this software without specific prior written permission.
+//
+// This software is provided by the copyright holders and contributors "as is" and
+// any express or implied warranties, including, but not limited to, the implied
+// warranties of merchantability and fitness for a particular purpose are disclaimed.
+// In no event shall the Intel Corporation or contributors be liable for any direct,
+// indirect, incidental, special, exemplary, or consequential damages
+// (including, but not limited to, procurement of substitute goods or services;
+// loss of use, data, or profits; or business interruption) however caused
+// and on any theory of liability, whether in contract, strict liability,
+// or tort (including negligence or otherwise) arising in any way out of
+// the use of this software, even if advised of the possibility of such damage.
+//
+//M*/
+
+#ifndef OPENCV_CORE_PERSISTENCE_HPP
+#define OPENCV_CORE_PERSISTENCE_HPP
+
+#ifndef __cplusplus
+# error persistence.hpp header must be compiled as C++
+#endif
+
+//! @addtogroup core_c
+//! @{
+
+/** @brief "black box" representation of the file storage associated with a file on disk.
+
+Several functions that are described below take CvFileStorage\* as inputs and allow the user to
+save or to load hierarchical collections that consist of scalar values, standard CXCore objects
+(such as matrices, sequences, graphs), and user-defined objects.
+
+OpenCV can read and write data in XML (<http://www.w3c.org/XML>), YAML (<http://www.yaml.org>) or
+JSON (<http://www.json.org/>) formats. Below is an example of 3x3 floating-point identity matrix A,
+stored in XML and YAML files
+using CXCore functions:
+XML:
+@code{.xml}
+ <?xml version="1.0">
+ <opencv_storage>
+ <A type_id="opencv-matrix">
+ <rows>3</rows>
+ <cols>3</cols>
+ <dt>f</dt>
+ <data>1. 0. 0. 0. 1. 0. 0. 0. 1.</data>
+ </A>
+ </opencv_storage>
+@endcode
+YAML:
+@code{.yaml}
+ %YAML:1.0
+ A: !!opencv-matrix
+ rows: 3
+ cols: 3
+ dt: f
+ data: [ 1., 0., 0., 0., 1., 0., 0., 0., 1.]
+@endcode
+As it can be seen from the examples, XML uses nested tags to represent hierarchy, while YAML uses
+indentation for that purpose (similar to the Python programming language).
+
+The same functions can read and write data in both formats; the particular format is determined by
+the extension of the opened file, ".xml" for XML files, ".yml" or ".yaml" for YAML and ".json" for
+JSON.
+ */
+typedef struct CvFileStorage CvFileStorage;
+typedef struct CvFileNode CvFileNode;
+typedef struct CvMat CvMat;
+typedef struct CvMatND CvMatND;
+
+//! @} core_c
+
+#include "opencv2/core/types.hpp"
+#include "opencv2/core/mat.hpp"
+
+namespace cv {
+
+/** @addtogroup core_xml
+
+XML/YAML/JSON file storages. {#xml_storage}
+=======================
+Writing to a file storage.
+--------------------------
+You can store and then restore various OpenCV data structures to/from XML (<http://www.w3c.org/XML>),
+YAML (<http://www.yaml.org>) or JSON (<http://www.json.org/>) formats. Also, it is possible store
+and load arbitrarily complex data structures, which include OpenCV data structures, as well as
+primitive data types (integer and floating-point numbers and text strings) as their elements.
+
+Use the following procedure to write something to XML, YAML or JSON:
+-# Create new FileStorage and open it for writing. It can be done with a single call to
+FileStorage::FileStorage constructor that takes a filename, or you can use the default constructor
+and then call FileStorage::open. Format of the file (XML, YAML or JSON) is determined from the filename
+extension (".xml", ".yml"/".yaml" and ".json", respectively)
+-# Write all the data you want using the streaming operator `<<`, just like in the case of STL
+streams.
+-# Close the file using FileStorage::release. FileStorage destructor also closes the file.
+
+Here is an example:
+@code
+ #include "opencv2/opencv.hpp"
+ #include <time.h>
+
+ using namespace cv;
+
+ int main(int, char** argv)
+ {
+ FileStorage fs("test.yml", FileStorage::WRITE);
+
+ fs << "frameCount" << 5;
+ time_t rawtime; time(&rawtime);
+ fs << "calibrationDate" << asctime(localtime(&rawtime));
+ Mat cameraMatrix = (Mat_<double>(3,3) << 1000, 0, 320, 0, 1000, 240, 0, 0, 1);
+ Mat distCoeffs = (Mat_<double>(5,1) << 0.1, 0.01, -0.001, 0, 0);
+ fs << "cameraMatrix" << cameraMatrix << "distCoeffs" << distCoeffs;
+ fs << "features" << "[";
+ for( int i = 0; i < 3; i++ )
+ {
+ int x = rand() % 640;
+ int y = rand() % 480;
+ uchar lbp = rand() % 256;
+
+ fs << "{:" << "x" << x << "y" << y << "lbp" << "[:";
+ for( int j = 0; j < 8; j++ )
+ fs << ((lbp >> j) & 1);
+ fs << "]" << "}";
+ }
+ fs << "]";
+ fs.release();
+ return 0;
+ }
+@endcode
+The sample above stores to XML and integer, text string (calibration date), 2 matrices, and a custom
+structure "feature", which includes feature coordinates and LBP (local binary pattern) value. Here
+is output of the sample:
+@code{.yaml}
+%YAML:1.0
+frameCount: 5
+calibrationDate: "Fri Jun 17 14:09:29 2011\n"
+cameraMatrix: !!opencv-matrix
+ rows: 3
+ cols: 3
+ dt: d
+ data: [ 1000., 0., 320., 0., 1000., 240., 0., 0., 1. ]
+distCoeffs: !!opencv-matrix
+ rows: 5
+ cols: 1
+ dt: d
+ data: [ 1.0000000000000001e-01, 1.0000000000000000e-02,
+ -1.0000000000000000e-03, 0., 0. ]
+features:
+ - { x:167, y:49, lbp:[ 1, 0, 0, 1, 1, 0, 1, 1 ] }
+ - { x:298, y:130, lbp:[ 0, 0, 0, 1, 0, 0, 1, 1 ] }
+ - { x:344, y:158, lbp:[ 1, 1, 0, 0, 0, 0, 1, 0 ] }
+@endcode
+
+As an exercise, you can replace ".yml" with ".xml" or ".json" in the sample above and see, how the
+corresponding XML file will look like.
+
+Several things can be noted by looking at the sample code and the output:
+
+- The produced YAML (and XML/JSON) consists of heterogeneous collections that can be nested. There are
+ 2 types of collections: named collections (mappings) and unnamed collections (sequences). In mappings
+ each element has a name and is accessed by name. This is similar to structures and std::map in
+ C/C++ and dictionaries in Python. In sequences elements do not have names, they are accessed by
+ indices. This is similar to arrays and std::vector in C/C++ and lists, tuples in Python.
+ "Heterogeneous" means that elements of each single collection can have different types.
+
+ Top-level collection in YAML/XML/JSON is a mapping. Each matrix is stored as a mapping, and the matrix
+ elements are stored as a sequence. Then, there is a sequence of features, where each feature is
+ represented a mapping, and lbp value in a nested sequence.
+
+- When you write to a mapping (a structure), you write element name followed by its value. When you
+ write to a sequence, you simply write the elements one by one. OpenCV data structures (such as
+ cv::Mat) are written in absolutely the same way as simple C data structures - using `<<`
+ operator.
+
+- To write a mapping, you first write the special string `{` to the storage, then write the
+ elements as pairs (`fs << <element_name> << <element_value>`) and then write the closing
+ `}`.
+
+- To write a sequence, you first write the special string `[`, then write the elements, then
+ write the closing `]`.
+
+- In YAML/JSON (but not XML), mappings and sequences can be written in a compact Python-like inline
+ form. In the sample above matrix elements, as well as each feature, including its lbp value, is
+ stored in such inline form. To store a mapping/sequence in a compact form, put `:` after the
+ opening character, e.g. use `{:` instead of `{` and `[:` instead of `[`. When the
+ data is written to XML, those extra `:` are ignored.
+
+Reading data from a file storage.
+---------------------------------
+To read the previously written XML, YAML or JSON file, do the following:
+-# Open the file storage using FileStorage::FileStorage constructor or FileStorage::open method.
+ In the current implementation the whole file is parsed and the whole representation of file
+ storage is built in memory as a hierarchy of file nodes (see FileNode)
+
+-# Read the data you are interested in. Use FileStorage::operator [], FileNode::operator []
+ and/or FileNodeIterator.
+
+-# Close the storage using FileStorage::release.
+
+Here is how to read the file created by the code sample above:
+@code
+ FileStorage fs2("test.yml", FileStorage::READ);
+
+ // first method: use (type) operator on FileNode.
+ int frameCount = (int)fs2["frameCount"];
+
+ String date;
+ // second method: use FileNode::operator >>
+ fs2["calibrationDate"] >> date;
+
+ Mat cameraMatrix2, distCoeffs2;
+ fs2["cameraMatrix"] >> cameraMatrix2;
+ fs2["distCoeffs"] >> distCoeffs2;
+
+ cout << "frameCount: " << frameCount << endl
+ << "calibration date: " << date << endl
+ << "camera matrix: " << cameraMatrix2 << endl
+ << "distortion coeffs: " << distCoeffs2 << endl;
+
+ FileNode features = fs2["features"];
+ FileNodeIterator it = features.begin(), it_end = features.end();
+ int idx = 0;
+ std::vector<uchar> lbpval;
+
+ // iterate through a sequence using FileNodeIterator
+ for( ; it != it_end; ++it, idx++ )
+ {
+ cout << "feature #" << idx << ": ";
+ cout << "x=" << (int)(*it)["x"] << ", y=" << (int)(*it)["y"] << ", lbp: (";
+ // you can also easily read numerical arrays using FileNode >> std::vector operator.
+ (*it)["lbp"] >> lbpval;
+ for( int i = 0; i < (int)lbpval.size(); i++ )
+ cout << " " << (int)lbpval[i];
+ cout << ")" << endl;
+ }
+ fs2.release();
+@endcode
+
+Format specification {#format_spec}
+--------------------
+`([count]{u|c|w|s|i|f|d})`... where the characters correspond to fundamental C++ types:
+- `u` 8-bit unsigned number
+- `c` 8-bit signed number
+- `w` 16-bit unsigned number
+- `s` 16-bit signed number
+- `i` 32-bit signed number
+- `f` single precision floating-point number
+- `d` double precision floating-point number
+- `r` pointer, 32 lower bits of which are written as a signed integer. The type can be used to
+ store structures with links between the elements.
+
+`count` is the optional counter of values of a given type. For example, `2if` means that each array
+element is a structure of 2 integers, followed by a single-precision floating-point number. The
+equivalent notations of the above specification are `iif`, `2i1f` and so forth. Other examples: `u`
+means that the array consists of bytes, and `2d` means the array consists of pairs of doubles.
+
+@see @ref filestorage.cpp
+*/
+
+//! @{
+
+/** @example filestorage.cpp
+A complete example using the FileStorage interface
+*/
+
+////////////////////////// XML & YAML I/O //////////////////////////
+
+class CV_EXPORTS FileNode;
+class CV_EXPORTS FileNodeIterator;
+
+/** @brief XML/YAML/JSON file storage class that encapsulates all the information necessary for writing or
+reading data to/from a file.
+ */
+class CV_EXPORTS_W FileStorage
+{
+public:
+ //! file storage mode
+ enum Mode
+ {
+ READ = 0, //!< value, open the file for reading
+ WRITE = 1, //!< value, open the file for writing
+ APPEND = 2, //!< value, open the file for appending
+ MEMORY = 4, //!< flag, read data from source or write data to the internal buffer (which is
+ //!< returned by FileStorage::release)
+ FORMAT_MASK = (7<<3), //!< mask for format flags
+ FORMAT_AUTO = 0, //!< flag, auto format
+ FORMAT_XML = (1<<3), //!< flag, XML format
+ FORMAT_YAML = (2<<3), //!< flag, YAML format
+ FORMAT_JSON = (3<<3), //!< flag, JSON format
+
+ BASE64 = 64, //!< flag, write rawdata in Base64 by default. (consider using WRITE_BASE64)
+ WRITE_BASE64 = BASE64 | WRITE, //!< flag, enable both WRITE and BASE64
+ };
+ enum
+ {
+ UNDEFINED = 0,
+ VALUE_EXPECTED = 1,
+ NAME_EXPECTED = 2,
+ INSIDE_MAP = 4
+ };
+
+ /** @brief The constructors.
+
+ The full constructor opens the file. Alternatively you can use the default constructor and then
+ call FileStorage::open.
+ */
+ CV_WRAP FileStorage();
+
+ /** @overload
+ @param source Name of the file to open or the text string to read the data from. Extension of the
+ file (.xml, .yml/.yaml, or .json) determines its format (XML, YAML or JSON respectively). Also you can
+ append .gz to work with compressed files, for example myHugeMatrix.xml.gz. If both FileStorage::WRITE
+ and FileStorage::MEMORY flags are specified, source is used just to specify the output file format (e.g.
+ mydata.xml, .yml etc.).
+ @param flags Mode of operation. See FileStorage::Mode
+ @param encoding Encoding of the file. Note that UTF-16 XML encoding is not supported currently and
+ you should use 8-bit encoding instead of it.
+ */
+ CV_WRAP FileStorage(const String& source, int flags, const String& encoding=String());
+
+ /** @overload */
+ FileStorage(CvFileStorage* fs, bool owning=true);
+
+ //! the destructor. calls release()
+ virtual ~FileStorage();
+
+ /** @brief Opens a file.
+
+ See description of parameters in FileStorage::FileStorage. The method calls FileStorage::release
+ before opening the file.
+ @param filename Name of the file to open or the text string to read the data from.
+ Extension of the file (.xml, .yml/.yaml or .json) determines its format (XML, YAML or JSON
+ respectively). Also you can append .gz to work with compressed files, for example myHugeMatrix.xml.gz. If both
+ FileStorage::WRITE and FileStorage::MEMORY flags are specified, source is used just to specify
+ the output file format (e.g. mydata.xml, .yml etc.). A file name can also contain parameters.
+ You can use this format, "*?base64" (e.g. "file.json?base64" (case sensitive)), as an alternative to
+ FileStorage::BASE64 flag.
+ @param flags Mode of operation. One of FileStorage::Mode
+ @param encoding Encoding of the file. Note that UTF-16 XML encoding is not supported currently and
+ you should use 8-bit encoding instead of it.
+ */
+ CV_WRAP virtual bool open(const String& filename, int flags, const String& encoding=String());
+
+ /** @brief Checks whether the file is opened.
+
+ @returns true if the object is associated with the current file and false otherwise. It is a
+ good practice to call this method after you tried to open a file.
+ */
+ CV_WRAP virtual bool isOpened() const;
+
+ /** @brief Closes the file and releases all the memory buffers.
+
+ Call this method after all I/O operations with the storage are finished.
+ */
+ CV_WRAP virtual void release();
+
+ /** @brief Closes the file and releases all the memory buffers.
+
+ Call this method after all I/O operations with the storage are finished. If the storage was
+ opened for writing data and FileStorage::WRITE was specified
+ */
+ CV_WRAP virtual String releaseAndGetString();
+
+ /** @brief Returns the first element of the top-level mapping.
+ @returns The first element of the top-level mapping.
+ */
+ CV_WRAP FileNode getFirstTopLevelNode() const;
+
+ /** @brief Returns the top-level mapping
+ @param streamidx Zero-based index of the stream. In most cases there is only one stream in the file.
+ However, YAML supports multiple streams and so there can be several.
+ @returns The top-level mapping.
+ */
+ CV_WRAP FileNode root(int streamidx=0) const;
+
+ /** @brief Returns the specified element of the top-level mapping.
+ @param nodename Name of the file node.
+ @returns Node with the given name.
+ */
+ FileNode operator[](const String& nodename) const;
+
+ /** @overload */
+ CV_WRAP_AS(getNode) FileNode operator[](const char* nodename) const;
+
+ /** @brief Returns the obsolete C FileStorage structure.
+ @returns Pointer to the underlying C FileStorage structure
+ */
+ CvFileStorage* operator *() { return fs.get(); }
+
+ /** @overload */
+ const CvFileStorage* operator *() const { return fs.get(); }
+
+ /** @brief Writes multiple numbers.
+
+ Writes one or more numbers of the specified format to the currently written structure. Usually it is
+ more convenient to use operator `<<` instead of this method.
+ @param fmt Specification of each array element, see @ref format_spec "format specification"
+ @param vec Pointer to the written array.
+ @param len Number of the uchar elements to write.
+ */
+ void writeRaw( const String& fmt, const uchar* vec, size_t len );
+
+ /** @brief Writes the registered C structure (CvMat, CvMatND, CvSeq).
+ @param name Name of the written object.
+ @param obj Pointer to the object.
+ @see ocvWrite for details.
+ */
+ void writeObj( const String& name, const void* obj );
+
+ /**
+ * @brief Simplified writing API to use with bindings.
+ * @param name Name of the written object
+ * @param val Value of the written object
+ */
+ CV_WRAP void write(const String& name, double val);
+ /// @overload
+ CV_WRAP void write(const String& name, const String& val);
+ /// @overload
+ CV_WRAP void write(const String& name, InputArray val);
+
+ /** @brief Writes a comment.
+
+ The function writes a comment into file storage. The comments are skipped when the storage is read.
+ @param comment The written comment, single-line or multi-line
+ @param append If true, the function tries to put the comment at the end of current line.
+ Else if the comment is multi-line, or if it does not fit at the end of the current
+ line, the comment starts a new line.
+ */
+ CV_WRAP void writeComment(const String& comment, bool append = false);
+
+ /** @brief Returns the normalized object name for the specified name of a file.
+ @param filename Name of a file
+ @returns The normalized object name.
+ */
+ static String getDefaultObjectName(const String& filename);
+
+ Ptr<CvFileStorage> fs; //!< the underlying C FileStorage structure
+ String elname; //!< the currently written element
+ std::vector<char> structs; //!< the stack of written structures
+ int state; //!< the writer state
+};
+
+template<> CV_EXPORTS void DefaultDeleter<CvFileStorage>::operator ()(CvFileStorage* obj) const;
+
+/** @brief File Storage Node class.
+
+The node is used to store each and every element of the file storage opened for reading. When
+XML/YAML file is read, it is first parsed and stored in the memory as a hierarchical collection of
+nodes. Each node can be a “leaf” that is contain a single number or a string, or be a collection of
+other nodes. There can be named collections (mappings) where each element has a name and it is
+accessed by a name, and ordered collections (sequences) where elements do not have names but rather
+accessed by index. Type of the file node can be determined using FileNode::type method.
+
+Note that file nodes are only used for navigating file storages opened for reading. When a file
+storage is opened for writing, no data is stored in memory after it is written.
+ */
+class CV_EXPORTS_W_SIMPLE FileNode
+{
+public:
+ //! type of the file storage node
+ enum Type
+ {
+ NONE = 0, //!< empty node
+ INT = 1, //!< an integer
+ REAL = 2, //!< floating-point number
+ FLOAT = REAL, //!< synonym or REAL
+ STR = 3, //!< text string in UTF-8 encoding
+ STRING = STR, //!< synonym for STR
+ REF = 4, //!< integer of size size_t. Typically used for storing complex dynamic structures where some elements reference the others
+ SEQ = 5, //!< sequence
+ MAP = 6, //!< mapping
+ TYPE_MASK = 7,
+ FLOW = 8, //!< compact representation of a sequence or mapping. Used only by YAML writer
+ USER = 16, //!< a registered object (e.g. a matrix)
+ EMPTY = 32, //!< empty structure (sequence or mapping)
+ NAMED = 64 //!< the node has a name (i.e. it is element of a mapping)
+ };
+ /** @brief The constructors.
+
+ These constructors are used to create a default file node, construct it from obsolete structures or
+ from the another file node.
+ */
+ CV_WRAP FileNode();
+
+ /** @overload
+ @param fs Pointer to the obsolete file storage structure.
+ @param node File node to be used as initialization for the created file node.
+ */
+ FileNode(const CvFileStorage* fs, const CvFileNode* node);
+
+ /** @overload
+ @param node File node to be used as initialization for the created file node.
+ */
+ FileNode(const FileNode& node);
+
+ /** @brief Returns element of a mapping node or a sequence node.
+ @param nodename Name of an element in the mapping node.
+ @returns Returns the element with the given identifier.
+ */
+ FileNode operator[](const String& nodename) const;
+
+ /** @overload
+ @param nodename Name of an element in the mapping node.
+ */
+ CV_WRAP_AS(getNode) FileNode operator[](const char* nodename) const;
+
+ /** @overload
+ @param i Index of an element in the sequence node.
+ */
+ CV_WRAP_AS(at) FileNode operator[](int i) const;
+
+ /** @brief Returns type of the node.
+ @returns Type of the node. See FileNode::Type
+ */
+ CV_WRAP int type() const;
+
+ //! returns true if the node is empty
+ CV_WRAP bool empty() const;
+ //! returns true if the node is a "none" object
+ CV_WRAP bool isNone() const;
+ //! returns true if the node is a sequence
+ CV_WRAP bool isSeq() const;
+ //! returns true if the node is a mapping
+ CV_WRAP bool isMap() const;
+ //! returns true if the node is an integer
+ CV_WRAP bool isInt() const;
+ //! returns true if the node is a floating-point number
+ CV_WRAP bool isReal() const;
+ //! returns true if the node is a text string
+ CV_WRAP bool isString() const;
+ //! returns true if the node has a name
+ CV_WRAP bool isNamed() const;
+ //! returns the node name or an empty string if the node is nameless
+ CV_WRAP String name() const;
+ //! returns the number of elements in the node, if it is a sequence or mapping, or 1 otherwise.
+ CV_WRAP size_t size() const;
+ //! returns the node content as an integer. If the node stores floating-point number, it is rounded.
+ operator int() const;
+ //! returns the node content as float
+ operator float() const;
+ //! returns the node content as double
+ operator double() const;
+ //! returns the node content as text string
+ operator String() const;
+#ifndef OPENCV_NOSTL
+ operator std::string() const;
+#endif
+
+ //! returns pointer to the underlying file node
+ CvFileNode* operator *();
+ //! returns pointer to the underlying file node
+ const CvFileNode* operator* () const;
+
+ //! returns iterator pointing to the first node element
+ FileNodeIterator begin() const;
+ //! returns iterator pointing to the element following the last node element
+ FileNodeIterator end() const;
+
+ /** @brief Reads node elements to the buffer with the specified format.
+
+ Usually it is more convenient to use operator `>>` instead of this method.
+ @param fmt Specification of each array element. See @ref format_spec "format specification"
+ @param vec Pointer to the destination array.
+ @param len Number of elements to read. If it is greater than number of remaining elements then all
+ of them will be read.
+ */
+ void readRaw( const String& fmt, uchar* vec, size_t len ) const;
+
+ //! reads the registered object and returns pointer to it
+ void* readObj() const;
+
+ //! Simplified reading API to use with bindings.
+ CV_WRAP double real() const;
+ //! Simplified reading API to use with bindings.
+ CV_WRAP String string() const;
+ //! Simplified reading API to use with bindings.
+ CV_WRAP Mat mat() const;
+
+ // do not use wrapper pointer classes for better efficiency
+ const CvFileStorage* fs;
+ const CvFileNode* node;
+};
+
+
+/** @brief used to iterate through sequences and mappings.
+
+A standard STL notation, with node.begin(), node.end() denoting the beginning and the end of a
+sequence, stored in node. See the data reading sample in the beginning of the section.
+ */
+class CV_EXPORTS FileNodeIterator
+{
+public:
+ /** @brief The constructors.
+
+ These constructors are used to create a default iterator, set it to specific element in a file node
+ or construct it from another iterator.
+ */
+ FileNodeIterator();
+
+ /** @overload
+ @param fs File storage for the iterator.
+ @param node File node for the iterator.
+ @param ofs Index of the element in the node. The created iterator will point to this element.
+ */
+ FileNodeIterator(const CvFileStorage* fs, const CvFileNode* node, size_t ofs=0);
+
+ /** @overload
+ @param it Iterator to be used as initialization for the created iterator.
+ */
+ FileNodeIterator(const FileNodeIterator& it);
+
+ //! returns the currently observed element
+ FileNode operator *() const;
+ //! accesses the currently observed element methods
+ FileNode operator ->() const;
+
+ //! moves iterator to the next node
+ FileNodeIterator& operator ++ ();
+ //! moves iterator to the next node
+ FileNodeIterator operator ++ (int);
+ //! moves iterator to the previous node
+ FileNodeIterator& operator -- ();
+ //! moves iterator to the previous node
+ FileNodeIterator operator -- (int);
+ //! moves iterator forward by the specified offset (possibly negative)
+ FileNodeIterator& operator += (int ofs);
+ //! moves iterator backward by the specified offset (possibly negative)
+ FileNodeIterator& operator -= (int ofs);
+
+ /** @brief Reads node elements to the buffer with the specified format.
+
+ Usually it is more convenient to use operator `>>` instead of this method.
+ @param fmt Specification of each array element. See @ref format_spec "format specification"
+ @param vec Pointer to the destination array.
+ @param maxCount Number of elements to read. If it is greater than number of remaining elements then
+ all of them will be read.
+ */
+ FileNodeIterator& readRaw( const String& fmt, uchar* vec,
+ size_t maxCount=(size_t)INT_MAX );
+
+ struct SeqReader
+ {
+ int header_size;
+ void* seq; /* sequence, beign read; CvSeq */
+ void* block; /* current block; CvSeqBlock */
+ schar* ptr; /* pointer to element be read next */
+ schar* block_min; /* pointer to the beginning of block */
+ schar* block_max; /* pointer to the end of block */
+ int delta_index;/* = seq->first->start_index */
+ schar* prev_elem; /* pointer to previous element */
+ };
+
+ const CvFileStorage* fs;
+ const CvFileNode* container;
+ SeqReader reader;
+ size_t remaining;
+};
+
+//! @} core_xml
+
+/////////////////// XML & YAML I/O implementation //////////////////
+
+//! @relates cv::FileStorage
+//! @{
+
+CV_EXPORTS void write( FileStorage& fs, const String& name, int value );
+CV_EXPORTS void write( FileStorage& fs, const String& name, float value );
+CV_EXPORTS void write( FileStorage& fs, const String& name, double value );
+CV_EXPORTS void write( FileStorage& fs, const String& name, const String& value );
+CV_EXPORTS void write( FileStorage& fs, const String& name, const Mat& value );
+CV_EXPORTS void write( FileStorage& fs, const String& name, const SparseMat& value );
+CV_EXPORTS void write( FileStorage& fs, const String& name, const std::vector<KeyPoint>& value);
+CV_EXPORTS void write( FileStorage& fs, const String& name, const std::vector<DMatch>& value);
+
+CV_EXPORTS void writeScalar( FileStorage& fs, int value );
+CV_EXPORTS void writeScalar( FileStorage& fs, float value );
+CV_EXPORTS void writeScalar( FileStorage& fs, double value );
+CV_EXPORTS void writeScalar( FileStorage& fs, const String& value );
+
+//! @}
+
+//! @relates cv::FileNode
+//! @{
+
+CV_EXPORTS void read(const FileNode& node, int& value, int default_value);
+CV_EXPORTS void read(const FileNode& node, float& value, float default_value);
+CV_EXPORTS void read(const FileNode& node, double& value, double default_value);
+CV_EXPORTS void read(const FileNode& node, String& value, const String& default_value);
+CV_EXPORTS void read(const FileNode& node, Mat& mat, const Mat& default_mat = Mat() );
+CV_EXPORTS void read(const FileNode& node, SparseMat& mat, const SparseMat& default_mat = SparseMat() );
+CV_EXPORTS void read(const FileNode& node, std::vector<KeyPoint>& keypoints);
+CV_EXPORTS void read(const FileNode& node, std::vector<DMatch>& matches);
+
+template<typename _Tp> static inline void read(const FileNode& node, Point_<_Tp>& value, const Point_<_Tp>& default_value)
+{
+ std::vector<_Tp> temp; FileNodeIterator it = node.begin(); it >> temp;
+ value = temp.size() != 2 ? default_value : Point_<_Tp>(saturate_cast<_Tp>(temp[0]), saturate_cast<_Tp>(temp[1]));
+}
+
+template<typename _Tp> static inline void read(const FileNode& node, Point3_<_Tp>& value, const Point3_<_Tp>& default_value)
+{
+ std::vector<_Tp> temp; FileNodeIterator it = node.begin(); it >> temp;
+ value = temp.size() != 3 ? default_value : Point3_<_Tp>(saturate_cast<_Tp>(temp[0]), saturate_cast<_Tp>(temp[1]),
+ saturate_cast<_Tp>(temp[2]));
+}
+
+template<typename _Tp> static inline void read(const FileNode& node, Size_<_Tp>& value, const Size_<_Tp>& default_value)
+{
+ std::vector<_Tp> temp; FileNodeIterator it = node.begin(); it >> temp;
+ value = temp.size() != 2 ? default_value : Size_<_Tp>(saturate_cast<_Tp>(temp[0]), saturate_cast<_Tp>(temp[1]));
+}
+
+template<typename _Tp> static inline void read(const FileNode& node, Complex<_Tp>& value, const Complex<_Tp>& default_value)
+{
+ std::vector<_Tp> temp; FileNodeIterator it = node.begin(); it >> temp;
+ value = temp.size() != 2 ? default_value : Complex<_Tp>(saturate_cast<_Tp>(temp[0]), saturate_cast<_Tp>(temp[1]));
+}
+
+template<typename _Tp> static inline void read(const FileNode& node, Rect_<_Tp>& value, const Rect_<_Tp>& default_value)
+{
+ std::vector<_Tp> temp; FileNodeIterator it = node.begin(); it >> temp;
+ value = temp.size() != 4 ? default_value : Rect_<_Tp>(saturate_cast<_Tp>(temp[0]), saturate_cast<_Tp>(temp[1]),
+ saturate_cast<_Tp>(temp[2]), saturate_cast<_Tp>(temp[3]));
+}
+
+template<typename _Tp, int cn> static inline void read(const FileNode& node, Vec<_Tp, cn>& value, const Vec<_Tp, cn>& default_value)
+{
+ std::vector<_Tp> temp; FileNodeIterator it = node.begin(); it >> temp;
+ value = temp.size() != cn ? default_value : Vec<_Tp, cn>(&temp[0]);
+}
+
+template<typename _Tp> static inline void read(const FileNode& node, Scalar_<_Tp>& value, const Scalar_<_Tp>& default_value)
+{
+ std::vector<_Tp> temp; FileNodeIterator it = node.begin(); it >> temp;
+ value = temp.size() != 4 ? default_value : Scalar_<_Tp>(saturate_cast<_Tp>(temp[0]), saturate_cast<_Tp>(temp[1]),
+ saturate_cast<_Tp>(temp[2]), saturate_cast<_Tp>(temp[3]));
+}
+
+static inline void read(const FileNode& node, Range& value, const Range& default_value)
+{
+ Point2i temp(value.start, value.end); const Point2i default_temp = Point2i(default_value.start, default_value.end);
+ read(node, temp, default_temp);
+ value.start = temp.x; value.end = temp.y;
+}
+
+//! @}
+
+/** @brief Writes string to a file storage.
+@relates cv::FileStorage
+ */
+CV_EXPORTS FileStorage& operator << (FileStorage& fs, const String& str);
+
+//! @cond IGNORED
+
+namespace internal
+{
+ class CV_EXPORTS WriteStructContext
+ {
+ public:
+ WriteStructContext(FileStorage& _fs, const String& name, int flags, const String& typeName = String());
+ ~WriteStructContext();
+ private:
+ FileStorage* fs;
+ };
+
+ template<typename _Tp, int numflag> class VecWriterProxy
+ {
+ public:
+ VecWriterProxy( FileStorage* _fs ) : fs(_fs) {}
+ void operator()(const std::vector<_Tp>& vec) const
+ {
+ size_t count = vec.size();
+ for (size_t i = 0; i < count; i++)
+ write(*fs, vec[i]);
+ }
+ private:
+ FileStorage* fs;
+ };
+
+ template<typename _Tp> class VecWriterProxy<_Tp, 1>
+ {
+ public:
+ VecWriterProxy( FileStorage* _fs ) : fs(_fs) {}
+ void operator()(const std::vector<_Tp>& vec) const
+ {
+ int _fmt = DataType<_Tp>::fmt;
+ char fmt[] = { (char)((_fmt >> 8) + '1'), (char)_fmt, '\0' };
+ fs->writeRaw(fmt, !vec.empty() ? (uchar*)&vec[0] : 0, vec.size() * sizeof(_Tp));
+ }
+ private:
+ FileStorage* fs;
+ };
+
+ template<typename _Tp, int numflag> class VecReaderProxy
+ {
+ public:
+ VecReaderProxy( FileNodeIterator* _it ) : it(_it) {}
+ void operator()(std::vector<_Tp>& vec, size_t count) const
+ {
+ count = std::min(count, it->remaining);
+ vec.resize(count);
+ for (size_t i = 0; i < count; i++, ++(*it))
+ read(**it, vec[i], _Tp());
+ }
+ private:
+ FileNodeIterator* it;
+ };
+
+ template<typename _Tp> class VecReaderProxy<_Tp, 1>
+ {
+ public:
+ VecReaderProxy( FileNodeIterator* _it ) : it(_it) {}
+ void operator()(std::vector<_Tp>& vec, size_t count) const
+ {
+ size_t remaining = it->remaining;
+ size_t cn = DataType<_Tp>::channels;
+ int _fmt = DataType<_Tp>::fmt;
+ char fmt[] = { (char)((_fmt >> 8)+'1'), (char)_fmt, '\0' };
+ size_t remaining1 = remaining / cn;
+ count = count < remaining1 ? count : remaining1;
+ vec.resize(count);
+ it->readRaw(fmt, !vec.empty() ? (uchar*)&vec[0] : 0, count*sizeof(_Tp));
+ }
+ private:
+ FileNodeIterator* it;
+ };
+
+} // internal
+
+//! @endcond
+
+//! @relates cv::FileStorage
+//! @{
+
+template<typename _Tp> static inline
+void write(FileStorage& fs, const _Tp& value)
+{
+ write(fs, String(), value);
+}
+
+template<> inline
+void write( FileStorage& fs, const int& value )
+{
+ writeScalar(fs, value);
+}
+
+template<> inline
+void write( FileStorage& fs, const float& value )
+{
+ writeScalar(fs, value);
+}
+
+template<> inline
+void write( FileStorage& fs, const double& value )
+{
+ writeScalar(fs, value);
+}
+
+template<> inline
+void write( FileStorage& fs, const String& value )
+{
+ writeScalar(fs, value);
+}
+
+template<typename _Tp> static inline
+void write(FileStorage& fs, const Point_<_Tp>& pt )
+{
+ write(fs, pt.x);
+ write(fs, pt.y);
+}
+
+template<typename _Tp> static inline
+void write(FileStorage& fs, const Point3_<_Tp>& pt )
+{
+ write(fs, pt.x);
+ write(fs, pt.y);
+ write(fs, pt.z);
+}
+
+template<typename _Tp> static inline
+void write(FileStorage& fs, const Size_<_Tp>& sz )
+{
+ write(fs, sz.width);
+ write(fs, sz.height);
+}
+
+template<typename _Tp> static inline
+void write(FileStorage& fs, const Complex<_Tp>& c )
+{
+ write(fs, c.re);
+ write(fs, c.im);
+}
+
+template<typename _Tp> static inline
+void write(FileStorage& fs, const Rect_<_Tp>& r )
+{
+ write(fs, r.x);
+ write(fs, r.y);
+ write(fs, r.width);
+ write(fs, r.height);
+}
+
+template<typename _Tp, int cn> static inline
+void write(FileStorage& fs, const Vec<_Tp, cn>& v )
+{
+ for(int i = 0; i < cn; i++)
+ write(fs, v.val[i]);
+}
+
+template<typename _Tp> static inline
+void write(FileStorage& fs, const Scalar_<_Tp>& s )
+{
+ write(fs, s.val[0]);
+ write(fs, s.val[1]);
+ write(fs, s.val[2]);
+ write(fs, s.val[3]);
+}
+
+static inline
+void write(FileStorage& fs, const Range& r )
+{
+ write(fs, r.start);
+ write(fs, r.end);
+}
+
+template<typename _Tp> static inline
+void write( FileStorage& fs, const std::vector<_Tp>& vec )
+{
+ cv::internal::VecWriterProxy<_Tp, DataType<_Tp>::fmt != 0> w(&fs);
+ w(vec);
+}
+
+template<typename _Tp> static inline
+void write(FileStorage& fs, const String& name, const Point_<_Tp>& pt )
+{
+ cv::internal::WriteStructContext ws(fs, name, FileNode::SEQ+FileNode::FLOW);
+ write(fs, pt);
+}
+
+template<typename _Tp> static inline
+void write(FileStorage& fs, const String& name, const Point3_<_Tp>& pt )
+{
+ cv::internal::WriteStructContext ws(fs, name, FileNode::SEQ+FileNode::FLOW);
+ write(fs, pt);
+}
+
+template<typename _Tp> static inline
+void write(FileStorage& fs, const String& name, const Size_<_Tp>& sz )
+{
+ cv::internal::WriteStructContext ws(fs, name, FileNode::SEQ+FileNode::FLOW);
+ write(fs, sz);
+}
+
+template<typename _Tp> static inline
+void write(FileStorage& fs, const String& name, const Complex<_Tp>& c )
+{
+ cv::internal::WriteStructContext ws(fs, name, FileNode::SEQ+FileNode::FLOW);
+ write(fs, c);
+}
+
+template<typename _Tp> static inline
+void write(FileStorage& fs, const String& name, const Rect_<_Tp>& r )
+{
+ cv::internal::WriteStructContext ws(fs, name, FileNode::SEQ+FileNode::FLOW);
+ write(fs, r);
+}
+
+template<typename _Tp, int cn> static inline
+void write(FileStorage& fs, const String& name, const Vec<_Tp, cn>& v )
+{
+ cv::internal::WriteStructContext ws(fs, name, FileNode::SEQ+FileNode::FLOW);
+ write(fs, v);
+}
+
+template<typename _Tp> static inline
+void write(FileStorage& fs, const String& name, const Scalar_<_Tp>& s )
+{
+ cv::internal::WriteStructContext ws(fs, name, FileNode::SEQ+FileNode::FLOW);
+ write(fs, s);
+}
+
+static inline
+void write(FileStorage& fs, const String& name, const Range& r )
+{
+ cv::internal::WriteStructContext ws(fs, name, FileNode::SEQ+FileNode::FLOW);
+ write(fs, r);
+}
+
+template<typename _Tp> static inline
+void write( FileStorage& fs, const String& name, const std::vector<_Tp>& vec )
+{
+ cv::internal::WriteStructContext ws(fs, name, FileNode::SEQ+(DataType<_Tp>::fmt != 0 ? FileNode::FLOW : 0));
+ write(fs, vec);
+}
+
+template<typename _Tp> static inline
+void write( FileStorage& fs, const String& name, const std::vector< std::vector<_Tp> >& vec )
+{
+ cv::internal::WriteStructContext ws(fs, name, FileNode::SEQ);
+ for(size_t i = 0; i < vec.size(); i++)
+ {
+ cv::internal::WriteStructContext ws_(fs, name, FileNode::SEQ+(DataType<_Tp>::fmt != 0 ? FileNode::FLOW : 0));
+ write(fs, vec[i]);
+ }
+}
+
+//! @} FileStorage
+
+//! @relates cv::FileNode
+//! @{
+
+static inline
+void read(const FileNode& node, bool& value, bool default_value)
+{
+ int temp;
+ read(node, temp, (int)default_value);
+ value = temp != 0;
+}
+
+static inline
+void read(const FileNode& node, uchar& value, uchar default_value)
+{
+ int temp;
+ read(node, temp, (int)default_value);
+ value = saturate_cast<uchar>(temp);
+}
+
+static inline
+void read(const FileNode& node, schar& value, schar default_value)
+{
+ int temp;
+ read(node, temp, (int)default_value);
+ value = saturate_cast<schar>(temp);
+}
+
+static inline
+void read(const FileNode& node, ushort& value, ushort default_value)
+{
+ int temp;
+ read(node, temp, (int)default_value);
+ value = saturate_cast<ushort>(temp);
+}
+
+static inline
+void read(const FileNode& node, short& value, short default_value)
+{
+ int temp;
+ read(node, temp, (int)default_value);
+ value = saturate_cast<short>(temp);
+}
+
+template<typename _Tp> static inline
+void read( FileNodeIterator& it, std::vector<_Tp>& vec, size_t maxCount = (size_t)INT_MAX )
+{
+ cv::internal::VecReaderProxy<_Tp, DataType<_Tp>::fmt != 0> r(&it);
+ r(vec, maxCount);
+}
+
+template<typename _Tp> static inline
+void read( const FileNode& node, std::vector<_Tp>& vec, const std::vector<_Tp>& default_value = std::vector<_Tp>() )
+{
+ if(!node.node)
+ vec = default_value;
+ else
+ {
+ FileNodeIterator it = node.begin();
+ read( it, vec );
+ }
+}
+
+//! @} FileNode
+
+//! @relates cv::FileStorage
+//! @{
+
+/** @brief Writes data to a file storage.
+ */
+template<typename _Tp> static inline
+FileStorage& operator << (FileStorage& fs, const _Tp& value)
+{
+ if( !fs.isOpened() )
+ return fs;
+ if( fs.state == FileStorage::NAME_EXPECTED + FileStorage::INSIDE_MAP )
+ CV_Error( Error::StsError, "No element name has been given" );
+ write( fs, fs.elname, value );
+ if( fs.state & FileStorage::INSIDE_MAP )
+ fs.state = FileStorage::NAME_EXPECTED + FileStorage::INSIDE_MAP;
+ return fs;
+}
+
+/** @brief Writes data to a file storage.
+ */
+static inline
+FileStorage& operator << (FileStorage& fs, const char* str)
+{
+ return (fs << String(str));
+}
+
+/** @brief Writes data to a file storage.
+ */
+static inline
+FileStorage& operator << (FileStorage& fs, char* value)
+{
+ return (fs << String(value));
+}
+
+//! @} FileStorage
+
+//! @relates cv::FileNodeIterator
+//! @{
+
+/** @brief Reads data from a file storage.
+ */
+template<typename _Tp> static inline
+FileNodeIterator& operator >> (FileNodeIterator& it, _Tp& value)
+{
+ read( *it, value, _Tp());
+ return ++it;
+}
+
+/** @brief Reads data from a file storage.
+ */
+template<typename _Tp> static inline
+FileNodeIterator& operator >> (FileNodeIterator& it, std::vector<_Tp>& vec)
+{
+ cv::internal::VecReaderProxy<_Tp, DataType<_Tp>::fmt != 0> r(&it);
+ r(vec, (size_t)INT_MAX);
+ return it;
+}
+
+//! @} FileNodeIterator
+
+//! @relates cv::FileNode
+//! @{
+
+/** @brief Reads data from a file storage.
+ */
+template<typename _Tp> static inline
+void operator >> (const FileNode& n, _Tp& value)
+{
+ read( n, value, _Tp());
+}
+
+/** @brief Reads data from a file storage.
+ */
+template<typename _Tp> static inline
+void operator >> (const FileNode& n, std::vector<_Tp>& vec)
+{
+ FileNodeIterator it = n.begin();
+ it >> vec;
+}
+
+/** @brief Reads KeyPoint from a file storage.
+*/
+//It needs special handling because it contains two types of fields, int & float.
+static inline
+void operator >> (const FileNode& n, std::vector<KeyPoint>& vec)
+{
+ read(n, vec);
+}
+/** @brief Reads DMatch from a file storage.
+*/
+//It needs special handling because it contains two types of fields, int & float.
+static inline
+void operator >> (const FileNode& n, std::vector<DMatch>& vec)
+{
+ read(n, vec);
+}
+
+//! @} FileNode
+
+//! @relates cv::FileNodeIterator
+//! @{
+
+static inline
+bool operator == (const FileNodeIterator& it1, const FileNodeIterator& it2)
+{
+ return it1.fs == it2.fs && it1.container == it2.container &&
+ it1.reader.ptr == it2.reader.ptr && it1.remaining == it2.remaining;
+}
+
+static inline
+bool operator != (const FileNodeIterator& it1, const FileNodeIterator& it2)
+{
+ return !(it1 == it2);
+}
+
+static inline
+ptrdiff_t operator - (const FileNodeIterator& it1, const FileNodeIterator& it2)
+{
+ return it2.remaining - it1.remaining;
+}
+
+static inline
+bool operator < (const FileNodeIterator& it1, const FileNodeIterator& it2)
+{
+ return it1.remaining > it2.remaining;
+}
+
+//! @} FileNodeIterator
+
+//! @cond IGNORED
+
+inline FileNode FileStorage::getFirstTopLevelNode() const { FileNode r = root(); FileNodeIterator it = r.begin(); return it != r.end() ? *it : FileNode(); }
+inline FileNode::FileNode() : fs(0), node(0) {}
+inline FileNode::FileNode(const CvFileStorage* _fs, const CvFileNode* _node) : fs(_fs), node(_node) {}
+inline FileNode::FileNode(const FileNode& _node) : fs(_node.fs), node(_node.node) {}
+inline bool FileNode::empty() const { return node == 0; }
+inline bool FileNode::isNone() const { return type() == NONE; }
+inline bool FileNode::isSeq() const { return type() == SEQ; }
+inline bool FileNode::isMap() const { return type() == MAP; }
+inline bool FileNode::isInt() const { return type() == INT; }
+inline bool FileNode::isReal() const { return type() == REAL; }
+inline bool FileNode::isString() const { return type() == STR; }
+inline CvFileNode* FileNode::operator *() { return (CvFileNode*)node; }
+inline const CvFileNode* FileNode::operator* () const { return node; }
+inline FileNode::operator int() const { int value; read(*this, value, 0); return value; }
+inline FileNode::operator float() const { float value; read(*this, value, 0.f); return value; }
+inline FileNode::operator double() const { double value; read(*this, value, 0.); return value; }
+inline FileNode::operator String() const { String value; read(*this, value, value); return value; }
+inline double FileNode::real() const { return double(*this); }
+inline String FileNode::string() const { return String(*this); }
+inline Mat FileNode::mat() const { Mat value; read(*this, value, value); return value; }
+inline FileNodeIterator FileNode::begin() const { return FileNodeIterator(fs, node); }
+inline FileNodeIterator FileNode::end() const { return FileNodeIterator(fs, node, size()); }
+inline void FileNode::readRaw( const String& fmt, uchar* vec, size_t len ) const { begin().readRaw( fmt, vec, len ); }
+inline FileNode FileNodeIterator::operator *() const { return FileNode(fs, (const CvFileNode*)(const void*)reader.ptr); }
+inline FileNode FileNodeIterator::operator ->() const { return FileNode(fs, (const CvFileNode*)(const void*)reader.ptr); }
+inline String::String(const FileNode& fn): cstr_(0), len_(0) { read(fn, *this, *this); }
+
+//! @endcond
+
+
+CV_EXPORTS void cvStartWriteRawData_Base64(::CvFileStorage * fs, const char* name, int len, const char* dt);
+
+CV_EXPORTS void cvWriteRawData_Base64(::CvFileStorage * fs, const void* _data, int len);
+
+CV_EXPORTS void cvEndWriteRawData_Base64(::CvFileStorage * fs);
+
+CV_EXPORTS void cvWriteMat_Base64(::CvFileStorage* fs, const char* name, const ::CvMat* mat);
+
+CV_EXPORTS void cvWriteMatND_Base64(::CvFileStorage* fs, const char* name, const ::CvMatND* mat);
+
+} // cv
+
+#endif // OPENCV_CORE_PERSISTENCE_HPP