File content as of revision 3:7a284390b0ce:

/* ----------------------------------------------------------------------    
* Copyright (C) 2010-2013 ARM Limited. All rights reserved.    
*    
* $Date:        17. January 2013
* $Revision: 	V1.4.1
*    
* Project: 	    CMSIS DSP Library    
* Title:		arm_shift_q31.c    
*    
* Description:	Shifts the elements of a Q31 vector by a specified number of bits.    
*    
* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
*  
* Redistribution and use in source and binary forms, with or without 
* modification, are permitted provided that the following conditions
* are met:
*   - Redistributions of source code must retain the above copyright
*     notice, this list of conditions and the following disclaimer.
*   - Redistributions in binary form must reproduce the above copyright
*     notice, this list of conditions and the following disclaimer in
*     the documentation and/or other materials provided with the 
*     distribution.
*   - Neither the name of ARM LIMITED nor the names of its contributors
*     may be used to endorse or promote products derived from this
*     software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE. 
* -------------------------------------------------------------------- */

#include "arm_math.h"

/**        
 * @ingroup groupMath        
 */
/**        
 * @defgroup shift Vector Shift        
 *        
 * Shifts the elements of a fixed-point vector by a specified number of bits.        
 * There are separate functions for Q7, Q15, and Q31 data types.        
 * The underlying algorithm used is:        
 *        
 * <pre>        
 *     pDst[n] = pSrc[n] << shift,   0 <= n < blockSize.        
 * </pre>        
 *        
 * If <code>shift</code> is positive then the elements of the vector are shifted to the left.        
 * If <code>shift</code> is negative then the elements of the vector are shifted to the right.        
 *
 * The functions support in-place computation allowing the source and destination
 * pointers to reference the same memory buffer.
 */

/**        
 * @addtogroup shift        
 * @{        
 */

/**        
 * @brief  Shifts the elements of a Q31 vector a specified number of bits.        
 * @param[in]  *pSrc points to the input vector        
 * @param[in]  shiftBits number of bits to shift.  A positive value shifts left; a negative value shifts right.        
 * @param[out]  *pDst points to the output vector        
 * @param[in]  blockSize number of samples in the vector        
 * @return none.        
 *        
 *        
 * <b>Scaling and Overflow Behavior:</b>        
 * \par        
 * The function uses saturating arithmetic.        
 * Results outside of the allowable Q31 range [0x80000000 0x7FFFFFFF] will be saturated.        
 */

void arm_shift_q31(
  q31_t * pSrc,
  int8_t shiftBits,
  q31_t * pDst,
  uint32_t blockSize)
{
  uint32_t blkCnt;                               /* loop counter */
  uint8_t sign = (shiftBits & 0x80);             /* Sign of shiftBits */

#ifndef ARM_MATH_CM0_FAMILY

  q31_t in1, in2, in3, in4;                      /* Temporary input variables */
  q31_t out1, out2, out3, out4;                  /* Temporary output variables */

  /*loop Unrolling */
  blkCnt = blockSize >> 2u;


  if(sign == 0u)
  {
    /* First part of the processing with loop unrolling.  Compute 4 outputs at a time.    
     ** a second loop below computes the remaining 1 to 3 samples. */
    while(blkCnt > 0u)
    {
      /* C = A  << shiftBits */
      /* Shift the input and then store the results in the destination buffer. */
      in1 = *pSrc;
      in2 = *(pSrc + 1);
      out1 = in1 << shiftBits;
      in3 = *(pSrc + 2);
      out2 = in2 << shiftBits;
      in4 = *(pSrc + 3);
      if(in1 != (out1 >> shiftBits))
        out1 = 0x7FFFFFFF ^ (in1 >> 31);

      if(in2 != (out2 >> shiftBits))
        out2 = 0x7FFFFFFF ^ (in2 >> 31);

      *pDst = out1;
      out3 = in3 << shiftBits;
      *(pDst + 1) = out2;
      out4 = in4 << shiftBits;

      if(in3 != (out3 >> shiftBits))
        out3 = 0x7FFFFFFF ^ (in3 >> 31);

      if(in4 != (out4 >> shiftBits))
        out4 = 0x7FFFFFFF ^ (in4 >> 31);

      *(pDst + 2) = out3;
      *(pDst + 3) = out4;

      /* Update destination pointer to process next sampels */
      pSrc += 4u;
      pDst += 4u;

      /* Decrement the loop counter */
      blkCnt--;
    }
  }
  else
  {

    /* First part of the processing with loop unrolling.  Compute 4 outputs at a time.    
     ** a second loop below computes the remaining 1 to 3 samples. */
    while(blkCnt > 0u)
    {
      /* C = A >>  shiftBits */
      /* Shift the input and then store the results in the destination buffer. */
      in1 = *pSrc;
      in2 = *(pSrc + 1);
      in3 = *(pSrc + 2);
      in4 = *(pSrc + 3);

      *pDst = (in1 >> -shiftBits);
      *(pDst + 1) = (in2 >> -shiftBits);
      *(pDst + 2) = (in3 >> -shiftBits);
      *(pDst + 3) = (in4 >> -shiftBits);


      pSrc += 4u;
      pDst += 4u;

      blkCnt--;
    }

  }

  /* If the blockSize is not a multiple of 4, compute any remaining output samples here.    
   ** No loop unrolling is used. */
  blkCnt = blockSize % 0x4u;

#else

  /* Run the below code for Cortex-M0 */


  /* Initialize blkCnt with number of samples */
  blkCnt = blockSize;

#endif /* #ifndef ARM_MATH_CM0_FAMILY */


  while(blkCnt > 0u)
  {
    /* C = A (>> or <<) shiftBits */
    /* Shift the input and then store the result in the destination buffer. */
    *pDst++ = (sign == 0u) ? clip_q63_to_q31((q63_t) * pSrc++ << shiftBits) :
      (*pSrc++ >> -shiftBits);

    /* Decrement the loop counter */
    blkCnt--;
  }


}

/**        
 * @} end of shift group        
 */