SDG+USBHost(Mouse) Sample

Dependencies:   Sound_Generator USBHost_custom

Fork of SDG_Mouse_Sample by GR-PEACH_producer_meeting

Information

Japanese version is available in lower part of this page.
このページの後半に日本語版が用意されています.

What is this?

This program is a demonstration that sounds the sound by mouse operation by using USBHost(Mouse) and Sound Generator.

Settings

Close JP3 of GR-PEACH.
/media/uploads/RyoheiHagimoto/sdg-mouse.jpg

Operation

operationeffect
Right clickSounds
Left clickReset to base tone (C)
Moves the mouse to the rightLower the sound
Moves the mouse to the leftHigher the sound
Center cursorAdjust the sensitivity.
Reset the reference value in the click.

Others

The default setting of serial communication (baud rate etc.) in mbed is shown the following link.
Please refer to the link and change the settings of your PC terminal software.
The default value of baud rate in mbed is 9600, and this application uses baud rate 9600.
https://developer.mbed.org/teams/Renesas/wiki/GR-PEACH-Getting-Started#install-the-usb-serial-communication


概要

このプログラムは、USBHost(Mouse) + Sound Generatorで、マウス操作による擬似笛デモです。

設定

GR-PEACHのJP3をショートする必要があります。
/media/uploads/RyoheiHagimoto/sdg-mouse.jpg

操作方法

操作内容
右クリック音出力開始
左クリック基準音(ド)にリセット
マウス右移動高音になります
マウス左移動低音になります
センターカーソル音高低の変化量調整(クリックで基準値にリセット)

Others

mbedのシリアル通信(ボーレート等)のデフォルト設定は以下のリンクに示しています。
リンクを参考に、お使いのPCターミナルソフトの設定を変更して下さい。
mbedでのボーレートのデフォルト値は9600で、このサンプルではボーレート9600を使います。
https://developer.mbed.org/teams/Renesas/wiki/GR-PEACH-Getting-Started#install-the-usb-serial-communication

USBHostSerial/USBHostSerial.h

Committer:
samux
Date:
2013-03-14
Revision:
8:93da8ea2708b
Parent:
7:e7e63ac7ae5f
Child:
13:b58a2204422f

File content as of revision 8:93da8ea2708b:

/* mbed USBHost Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#ifndef USBHOSTSERIAL_H
#define USBHOSTSERIAL_H

#include "USBHostConf.h"

#if USBHOST_SERIAL

#include "USBHost.h"
#include "Stream.h"
#include "MtxCircBuffer.h"

/** 
 * A class to communicate a USB virtual serial port
 */
class USBHostSerial : public IUSBEnumerator, public Stream {
public:
    /**
    * Constructor
    */
    USBHostSerial();

    enum IrqType {
        RxIrq,
        TxIrq
    };
    
    enum Parity {
        None = 0,
        Odd,
        Even,
        Mark,
        Space
    };

    /**
    * Check if a virtual serial port is connected
    *
    * @returns true if a serial device is connected
    */
    bool connected();
    
    /**
     * Try to connect a serial device
     *
     * @return true if connection was successful
     */
    bool connect();
    
    /**
    * Check the number of bytes available.
    *
    * @returns the number of bytes available
    */
    uint8_t available(); 

    /**
     *  Attach a member function to call when a packet is received.
     *
     *  @param tptr pointer to the object to call the member function on
     *  @param mptr pointer to the member function to be called
     *  @param irq irq type
     */
    template<typename T>
    inline void attach(T* tptr, void (T::*mptr)(void), IrqType irq = RxIrq) {
        if ((mptr != NULL) && (tptr != NULL)) {
            if (irq == RxIrq) {
                rx.attach(tptr, mptr);
            } else {
                tx.attach(tptr, mptr);
            }
        }
    }

    /**
     * Attach a callback called when a packet is received
     *
     * @param ptr function pointer
     */
    inline void attach(void (*fn)(void), IrqType irq = RxIrq) {
        if (fn != NULL) {
            if (irq == RxIrq) {
                rx.attach(fn);
            } else {
                tx.attach(fn);
            }
        }
    }
    
    /** Set the baud rate of the serial port
     *
     *  @param baudrate The baudrate of the serial port (default = 9600).
     */
    void baud(int baudrate = 9600);
    
    /** Set the transmission format used by the Serial port
     *
     *  @param bits The number of bits in a word (default = 8)
     *  @param parity The parity used (USBHostSerial::None, USBHostSerial::Odd, USBHostSerial::Even, USBHostSerial::Mark, USBHostSerial::Space; default = USBHostSerial::None)
     *  @param stop The number of stop bits (1 or 2; default = 1)
     */
    void format(int bits = 8, Parity parity = USBHostSerial::None, int stop_bits = 1);


protected:
    //From IUSBEnumerator
    virtual void setVidPid(uint16_t vid, uint16_t pid);
    virtual bool parseInterface(uint8_t intf_nb, uint8_t intf_class, uint8_t intf_subclass, uint8_t intf_protocol); //Must return true if the interface should be parsed
    virtual bool useEndpoint(uint8_t intf_nb, ENDPOINT_TYPE type, ENDPOINT_DIRECTION dir); //Must return true if the endpoint will be used

    virtual int _getc();
    virtual int _putc(int c);
    
private:
    USBHost * host;
    USBDeviceConnected * dev;
    USBEndpoint * bulk_in;
    USBEndpoint * bulk_out;
    uint32_t size_bulk_in;
    uint32_t size_bulk_out;

    bool dev_connected;

    void init();

    MtxCircBuffer<uint8_t, 64> circ_buf;

    uint8_t buf[64];

    typedef __packed struct {
        uint32_t baudrate;
        uint8_t stop_bits;
        uint8_t parity;
        uint8_t data_bits;
    } LINE_CODING;
    
    LINE_CODING line_coding;

    void rxHandler();
    void txHandler();
    FunctionPointer rx;
    FunctionPointer tx;

    int serial_intf;
    bool serial_device_found;

};

#endif

#endif