Renesas
SDG+USBHost(Mouse) Sample
Dependencies: Sound_Generator USBHost_custom
Fork of
SDG_Mouse_Sample
by 
GR-PEACH_producer_meeting
Information
Japanese version is available in lower part of this page.
このページの後半に日本語版が用意されています．
What is this?
This program is a demonstration that sounds the sound by mouse operation by using USBHost(Mouse) and Sound Generator.
Settings
Close JP3 of GR-PEACH.
Operation
| operation | effect |
|---|---|
| Right click | Sounds |
| Left click | Reset to base tone (C) |
| Moves the mouse to the right | Lower the sound |
| Moves the mouse to the left | Higher the sound |
| Center cursor | Adjust the sensitivity. Reset the reference value in the click. |
Others
The default setting of serial communication (baud rate etc.) in mbed is shown the following link.
Please refer to the link and change the settings of your PC terminal software.
The default value of baud rate in mbed is 9600, and this application uses baud rate 9600.
https://developer.mbed.org/teams/Renesas/wiki/GR-PEACH-Getting-Started#install-the-usb-serial-communication
概要
このプログラムは、USBHost(Mouse) + Sound Generatorで、マウス操作による擬似笛デモです。
設定
GR-PEACHのJP3をショートする必要があります。
操作方法
| 操作 | 内容 |
|---|---|
| 右クリック | 音出力開始 |
| 左クリック | 基準音(ド)にリセット |
| マウス右移動 | 高音になります |
| マウス左移動 | 低音になります |
| センターカーソル | 音高低の変化量調整(クリックで基準値にリセット) |
Others
mbedのシリアル通信(ボーレート等)のデフォルト設定は以下のリンクに示しています。
リンクを参考に、お使いのPCターミナルソフトの設定を変更して下さい。
mbedでのボーレートのデフォルト値は9600で、このサンプルではボーレート9600を使います。
https://developer.mbed.org/teams/Renesas/wiki/GR-PEACH-Getting-Started#install-the-usb-serial-communication
USBHost/TARGET_RENESAS/TARGET_RZ_A1H/inc/devdrv_usb_host_api.h
- Committer:
- mbed_official
- Date:
- 2015-01-19
- Revision:
- 27:4206883f4cb7
File content as of revision 27:4206883f4cb7:
/*******************************************************************************
* DISCLAIMER
* This software is supplied by Renesas Electronics Corporation and is only
* intended for use with Renesas products. No other uses are authorized. This
* software is owned by Renesas Electronics Corporation and is protected under
* all applicable laws, including copyright laws.
* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
* Renesas reserves the right, without notice, to make changes to this software
* and to discontinue the availability of this software. By using this software,
* you agree to the additional terms and conditions found by accessing the
* following link:
* http://www.renesas.com/disclaimer
* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
*******************************************************************************/
/*******************************************************************************
* File Name : devdrv_usb_host_api.h
* $Rev: 1116 $
* $Date:: 2014-07-09 16:29:19 +0900#$
* Description : RZ/A1H R7S72100 USB Sample Program
*******************************************************************************/
#ifndef USB_HOST_API_H
#define USB_HOST_API_H
#include "r_typedefs.h"
/*******************************************************************************
Typedef definitions
*******************************************************************************/
/*******************************************************************************
Macro definitions
*******************************************************************************/
#define USB_HOST_PORTNUM (2)
#define USB_HOST_ELT_INTERRUPT_LEVEL (9)
#define USBHCLOCK_X1_48MHZ (0x0000u) /* USB_X1_48MHz */
#define USBHCLOCK_EXTAL_12MHZ (0x0004u) /* EXTAL_12MHz */
#define USB_HOST_MAX_DEVICE (10)
#define USB_HOST_ON (1)
#define USB_HOST_OFF (0)
#define USB_HOST_YES (1)
#define USB_HOST_NO (0)
#define USB_HOST_NON_SPEED (0)
#define USB_HOST_LOW_SPEED (1)
#define USB_HOST_FULL_SPEED (2)
#define USB_HOST_HIGH_SPEED (3)
/* DEVDRV_SUCCESS(0) & DEVDRV_ERROR(-1) is dev_drv.h */
#define DEVDRV_USBH_STALL (-2)
#define DEVDRV_USBH_TIMEOUT (-3)
#define DEVDRV_USBH_NAK_TIMEOUT (-4)
#define DEVDRV_USBH_DETACH_ERR (-5)
#define DEVDRV_USBH_SETUP_ERR (-6)
#define DEVDRV_USBH_CTRL_COM_ERR (-7)
#define DEVDRV_USBH_COM_ERR (-8)
#define DEVDRV_USBH_DEV_ADDR_ERR (-9)
#define USB_HOST_ATTACH (1)
#define USB_HOST_DETACH (0)
#define USB_HOST_MAX_PIPE_NO (9u)
#define USB_HOST_PIPE0 (0)
#define USB_HOST_PIPE1 (1)
#define USB_HOST_PIPE2 (2)
#define USB_HOST_PIPE3 (3)
#define USB_HOST_PIPE4 (4)
#define USB_HOST_PIPE5 (5)
#define USB_HOST_PIPE6 (6)
#define USB_HOST_PIPE7 (7)
#define USB_HOST_PIPE8 (8)
#define USB_HOST_PIPE9 (9)
#define USB_HOST_ISO (0xc000u)
#define USB_HOST_INTERRUPT (0x8000u)
#define USB_HOST_BULK (0x4000u)
#define USB_HOST_PIPE_IDLE (0x00)
#define USB_HOST_PIPE_WAIT (0x01)
#define USB_HOST_PIPE_DONE (0x02)
#define USB_HOST_PIPE_NORES (0x03)
#define USB_HOST_PIPE_STALL (0x04)
#define USB_HOST_PIPE_ERROR (0x05)
#define USB_HOST_NONE (0x0000u)
#define USB_HOST_BFREFIELD (0x0400u)
#define USB_HOST_BFREON (0x0400u)
#define USB_HOST_BFREOFF (0x0000u)
#define USB_HOST_DBLBFIELD (0x0200u)
#define USB_HOST_DBLBON (0x0200u)
#define USB_HOST_DBLBOFF (0x0000u)
#define USB_HOST_CNTMDFIELD (0x0100u)
#define USB_HOST_CNTMDON (0x0100u)
#define USB_HOST_CNTMDOFF (0x0000u)
#define USB_HOST_SHTNAKON (0x0080u)
#define USB_HOST_SHTNAKOFF (0x0000u)
#define USB_HOST_DIRFIELD (0x0010u)
#define USB_HOST_DIR_H_OUT (0x0010u)
#define USB_HOST_DIR_H_IN (0x0000u)
#define USB_HOST_EPNUMFIELD (0x000fu)
#define USB_HOST_CUSE (0)
#define USB_HOST_D0USE (1)
#define USB_HOST_D0DMA (2)
#define USB_HOST_D1USE (3)
#define USB_HOST_D1DMA (4)
#define USB_HOST_CFIFO_USE (0x0000)
#define USB_HOST_D0FIFO_USE (0x1000)
#define USB_HOST_D1FIFO_USE (0x2000)
#define USB_HOST_D0FIFO_DMA (0x5000)
#define USB_HOST_D1FIFO_DMA (0x6000)
#define USB_HOST_BUF2FIFO (0)
#define USB_HOST_FIFO2BUF (1)
#define USB_HOST_DRV_DETACHED (0x0000)
#define USB_HOST_DRV_ATTACHED (0x0001)
#define USB_HOST_DRV_GET_DEVICE_DESC_64 (0x0002)
#define USB_HOST_DRV_POWERED (0x0003)
#define USB_HOST_DRV_DEFAULT (0x0004)
#define USB_HOST_DRV_SET_ADDRESS (0x0005)
#define USB_HOST_DRV_ADDRESSED (0x0006)
#define USB_HOST_DRV_GET_DEVICE_DESC_18 (0x0007)
#define USB_HOST_DRV_GET_CONGIG_DESC_9 (0x0008)
#define USB_HOST_DRV_GET_CONGIG_DESC (0x0009)
#define USB_HOST_DRV_SET_CONFIG (0x000a)
#define USB_HOST_DRV_CONFIGURED (0x000b)
#define USB_HOST_DRV_SUSPEND (0x1000)
#define USB_HOST_DRV_NORES (0x0100)
#define USB_HOST_DRV_STALL (0x0200)
#define USB_HOST_TESTMODE_FORCE (0x000du)
#define USB_HOST_TESTMODE_TESTPACKET (0x000cu)
#define USB_HOST_TESTMODE_SE0_NAK (0x000bu)
#define USB_HOST_TESTMODE_K (0x000au)
#define USB_HOST_TESTMODE_J (0x0009u)
#define USB_HOST_TESTMODE_NORMAL (0x0000u)
#define USB_HOST_DT_DEVICE (0x01)
#define USB_HOST_DT_CONFIGURATION (0x02)
#define USB_HOST_DT_STRING (0x03)
#define USB_HOST_DT_INTERFACE (0x04)
#define USB_HOST_DT_ENDPOINT (0x05)
#define USB_HOST_DT_DEVICE_QUALIFIER (0x06)
#define USB_HOST_DT_OTHER_SPEED_CONFIGURATION (0x07)
#define USB_HOST_DT_INTERFACE_POWER (0x08)
#define USB_HOST_IF_CLS_NOT (0x00)
#define USB_HOST_IF_CLS_AUDIO (0x01)
#define USB_HOST_IF_CLS_CDC_CTRL (0x02)
#define USB_HOST_IF_CLS_HID (0x03)
#define USB_HOST_IF_CLS_PHYSICAL (0x05)
#define USB_HOST_IF_CLS_IMAGE (0x06)
#define USB_HOST_IF_CLS_PRINTER (0x07)
#define USB_HOST_IF_CLS_MASS (0x08)
#define USB_HOST_IF_CLS_HUB (0x09)
#define USB_HOST_IF_CLS_CDC_DATA (0x0a)
#define USB_HOST_IF_CLS_CRAD (0x0b)
#define USB_HOST_IF_CLS_CONTENT (0x0d)
#define USB_HOST_IF_CLS_VIDEO (0x0e)
#define USB_HOST_IF_CLS_DIAG (0xdc)
#define USB_HOST_IF_CLS_WIRELESS (0xe0)
#define USB_HOST_IF_CLS_APL (0xfe)
#define USB_HOST_IF_CLS_VENDOR (0xff)
#define USB_HOST_IF_CLS_HELE (0xaa)
#define USB_HOST_EP_DIR_MASK (0x80)
#define USB_HOST_EP_OUT (0x00)
#define USB_HOST_EP_IN (0x80)
#define USB_HOST_EP_TYPE (0x03)
#define USB_HOST_EP_CNTRL (0x00)
#define USB_HOST_EP_ISO (0x01)
#define USB_HOST_EP_BULK (0x02)
#define USB_HOST_EP_INT (0x03)
#define USB_HOST_EP_NUM_MASK (0x0f)
#define USB_HOST_PIPE_IN (0)
#define USB_HOST_PIPE_OUT (1)
#define USB_END_POINT_ERROR (0xffff)
#define USB_HOST_REQ_GET_STATUS (0x0000)
#define USB_HOST_REQ_CLEAR_FEATURE (0x0100)
#define USB_HOST_REQ_RESERVED2 (0x0200)
#define USB_HOST_REQ_SET_FEATURE (0x0300)
#define USB_HOST_REQ_RESERVED4 (0x0400)
#define USB_HOST_REQ_SET_ADDRESS (0x0500)
#define USB_HOST_REQ_GET_DESCRIPTOR (0x0600)
#define USB_HOST_REQ_SET_DESCRIPTOR (0x0700)
#define USB_HOST_REQ_GET_CONFIGURATION (0x0800)
#define USB_HOST_REQ_SET_CONFIGURATION (0x0900)
#define USB_HOST_REQ_GET_INTERFACE (0x0a00)
#define USB_HOST_REQ_SET_INTERFACE (0x0b00)
#define USB_HOST_REQ_SYNCH_FRAME (0x0c00)
#define USB_HOST_REQTYPE_HOST_TO_DEVICE (0x0000)
#define USB_HOST_REQTYPE_DEVICE_TO_HOST (0x0080)
#define USB_HOST_REQTYPE_STANDARD (0x0020)
#define USB_HOST_REQTYPE_CLASS (0x0040)
#define USB_HOST_REQTYPE_VENDOR (0x0060)
#define USB_HOST_REQTYPE_DEVICE (0x0000)
#define USB_HOST_REQTYPE_INTERFACE (0x0001)
#define USB_HOST_REQTYPE_ENDPOINT (0x0002)
#define USB_HOST_REQTYPE_OTHER (0x0003)
#define USB_HOST_DESCTYPE_DEVICE (0x0100)
#define USB_HOST_DESCTYPE_CONFIGURATION (0x0200)
#define USB_HOST_DESCTYPE_STRING (0x0300)
#define USB_HOST_DESCTYPE_INTERFACE (0x0400)
#define USB_HOST_DESCTYPE_ENDPOINT (0x0500)
#define USB_HOST_DESCTYPE_DEVICE_QUALIFIER (0x0600)
#define USB_HOST_DESCTYPE_OTHER_SPEED_CONFIGURATION (0x0700)
#define USB_HOST_DESCTYPE_INTERFACE_POWER (0x0800)
/*******************************************************************************
Variable Externs
*******************************************************************************/
typedef struct
{
uint16_t pipe_number;
uint16_t pipe_cfg;
uint16_t pipe_buf;
uint16_t pipe_max_pktsize;
uint16_t pipe_cycle;
uint16_t fifo_port;
} USB_HOST_CFG_PIPETBL_t;
typedef struct
{
uint32_t fifo;
uint32_t buffer;
uint32_t bytes;
uint32_t dir;
uint32_t size;
} USB_HOST_DMA_t;
/*******************************************************************************
Imported global variables and functions (from other files)
*******************************************************************************/
uint16_t R_USB_api_host_init(uint16_t root, uint8_t int_level, uint16_t mode, uint16_t clockmode);
int32_t R_USB_api_host_enumeration(uint16_t root, uint16_t devadr);
int32_t R_USB_api_host_detach(uint16_t root);
int32_t R_USB_api_host_data_in(uint16_t root, uint16_t devadr, uint16_t Pipe, uint32_t Size, uint8_t *data_buf);
int32_t R_USB_api_host_data_in2(uint16_t root, uint16_t devadr, uint16_t Pipe, uint32_t Size, uint8_t *data_buf, uint32_t *bytes);
int32_t R_USB_api_host_data_out(uint16_t root, uint16_t devadr, uint16_t Pipe, uint32_t Size, uint8_t *data_buf);
int32_t R_USB_api_host_control_transfer(uint16_t root, uint16_t devadr, uint16_t Req, uint16_t Val, uint16_t Indx, uint16_t Len, uint8_t *Buf);
int32_t R_USB_api_host_set_endpoint(uint16_t root, uint16_t devadr, USB_HOST_CFG_PIPETBL_t *user_table, uint8_t *configdescriptor);
int32_t R_USB_api_host_clear_endpoint(uint16_t root, USB_HOST_CFG_PIPETBL_t *user_table);
int32_t R_USB_api_host_clear_endpoint_pipe(uint16_t root, uint16_t pipe_sel, USB_HOST_CFG_PIPETBL_t *user_table);
uint16_t R_USB_api_host_SetEndpointTable(uint16_t root, uint16_t devadr, USB_HOST_CFG_PIPETBL_t *user_table, uint8_t* Table);
int32_t R_USB_api_host_GetDeviceDescriptor(uint16_t root, uint16_t devadr, uint16_t size, uint8_t *buf);
int32_t R_USB_api_host_GetConfigDescriptor(uint16_t root, uint16_t devadr, uint16_t size, uint8_t *buf);
int32_t R_USB_api_host_SetConfig(uint16_t root, uint16_t devadr, uint16_t confignum);
int32_t R_USB_api_host_SetInterface(uint16_t root, uint16_t devadr, uint16_t interface_alt, uint16_t interface_index);
int32_t R_USB_api_host_ClearStall(uint16_t root, uint16_t devadr, uint16_t ep_dir);
uint16_t R_USB_api_host_GetUsbDeviceState(uint16_t root);
void R_USB_api_host_elt_clocksel(uint16_t clockmode);
void R_USB_api_host_elt_4_4(uint16_t root);
void R_USB_api_host_elt_4_5(uint16_t root);
void R_USB_api_host_elt_4_6(uint16_t root);
void R_USB_api_host_elt_4_7(uint16_t root);
void R_USB_api_host_elt_4_8(uint16_t root);
void R_USB_api_host_elt_4_9(uint16_t root);
void R_USB_api_host_elt_get_desc(uint16_t root);
/*******************************************************************************
Includes <System Includes> , "Project Includes"
*******************************************************************************/
#include "usb0_host_api.h"
#if(1) /* ohci_wrapp */
#else
#include "usb1_host_api.h"
#endif
/*******************************************************************************
Imported global variables and functions (from other files)
*******************************************************************************/
#ifdef USB0_HOST_API_H
uint16_t Userdef_USB_usb0_host_d0fifo_dmaintid(void);
uint16_t Userdef_USB_usb0_host_d1fifo_dmaintid(void);
void Userdef_USB_usb0_host_attach(void);
void Userdef_USB_usb0_host_detach(void);
void Userdef_USB_usb0_host_delay_1ms(void);
void Userdef_USB_usb0_host_delay_xms(uint32_t msec);
void Userdef_USB_usb0_host_delay_10us(uint32_t usec);
void Userdef_USB_usb0_host_delay_500ns(void);
void Userdef_USB_usb0_host_start_dma(USB_HOST_DMA_t * dma, uint16_t dfacc);
uint32_t Userdef_USB_usb0_host_stop_dma0(void);
uint32_t Userdef_USB_usb0_host_stop_dma1(void);
void Userdef_USB_usb0_host_notice(const char * format);
void Userdef_USB_usb0_host_user_rdy(const char * format, uint16_t data);
#endif
#ifdef USB1_HOST_API_H
uint16_t Userdef_USB_usb1_host_d0fifo_dmaintid(void);
uint16_t Userdef_USB_usb1_host_d1fifo_dmaintid(void);
void Userdef_USB_usb1_host_attach(void);
void Userdef_USB_usb1_host_detach(void);
void Userdef_USB_usb1_host_delay_1ms(void);
void Userdef_USB_usb1_host_delay_xms(uint32_t msec);
void Userdef_USB_usb1_host_delay_10us(uint32_t usec);
void Userdef_USB_usb1_host_delay_500ns(void);
void Userdef_USB_usb1_host_start_dma(USB_HOST_DMA_t * dma, uint16_t dfacc);
uint32_t Userdef_USB_usb1_host_stop_dma0(void);
uint32_t Userdef_USB_usb1_host_stop_dma1(void);
void Userdef_USB_usb1_host_notice(const char * format);
void Userdef_USB_usb1_host_user_rdy(const char * format, uint16_t data);
#endif
#endif /* USB_HOST_API_H */
/* End of File */