Renesas / Mbed OS SDG_Mouse_Sample

SDG+USBHost(Mouse) Sample

Dependencies:   Sound_Generator USBHost_custom

Fork of SDG_Mouse_Sample by GR-PEACH_producer_meeting

Information

Japanese version is available in lower part of this page.
このページの後半に日本語版が用意されています．

What is this?

This program is a demonstration that sounds the sound by mouse operation by using USBHost(Mouse) and Sound Generator.

Settings

Close JP3 of GR-PEACH.
/media/uploads/RyoheiHagimoto/sdg-mouse.jpg

Operation

operationeffect
Right clickSounds
Left clickReset to base tone (C)
Moves the mouse to the rightLower the sound
Moves the mouse to the leftHigher the sound
Center cursorAdjust the sensitivity.
Reset the reference value in the click.

Others

The default setting of serial communication (baud rate etc.) in mbed is shown the following link.
Please refer to the link and change the settings of your PC terminal software.
The default value of baud rate in mbed is 9600, and this application uses baud rate 9600.
https://developer.mbed.org/teams/Renesas/wiki/GR-PEACH-Getting-Started#install-the-usb-serial-communication


概要

このプログラムは、USBHost(Mouse) + Sound Generatorで、マウス操作による擬似笛デモです。

設定

GR-PEACHのJP3をショートする必要があります。
/media/uploads/RyoheiHagimoto/sdg-mouse.jpg

操作方法

操作内容
右クリック音出力開始
左クリック基準音(ド)にリセット
マウス右移動高音になります
マウス左移動低音になります
センターカーソル音高低の変化量調整(クリックで基準値にリセット)

Others

mbedのシリアル通信(ボーレート等)のデフォルト設定は以下のリンクに示しています。
リンクを参考に、お使いのPCターミナルソフトの設定を変更して下さい。
mbedでのボーレートのデフォルト値は9600で、このサンプルではボーレート9600を使います。
https://developer.mbed.org/teams/Renesas/wiki/GR-PEACH-Getting-Started#install-the-usb-serial-communication

Diff: USBHost/USBHALHost.h

Revision:
24:868cbfe611a7
Parent:
8:93da8ea2708b
--- a/USBHost/USBHALHost.h	Fri Mar 07 16:00:46 2014 +0000
+++ b/USBHost/USBHALHost.h	Tue Jun 03 11:30:38 2014 +0100
@@ -33,61 +33,61 @@
     * init variables and memory where will be stored HCCA, ED and TD
     */
     USBHALHost();
-    
+
     /**
-    * Initialize host controller. Enable USB interrupts. This part is not in the constructor because, 
+    * Initialize host controller. Enable USB interrupts. This part is not in the constructor because,
     * this function calls a virtual method if a device is already connected
     */
     void init();
-    
+
     /**
     * reset the root hub
     */
     void resetRootHub();
-    
+
     /**
     * return the value contained in the control HEAD ED register
     *
     * @returns address of the control Head ED
     */
     uint32_t controlHeadED();
-    
+
     /**
     * return the value contained in the bulk HEAD ED register
     *
     * @returns address of the bulk head ED
     */
     uint32_t bulkHeadED();
-    
+
     /**
     * return the value of the head interrupt ED contained in the HCCA
     *
     * @returns address of the head interrupt ED contained in the HCCA
     */
     uint32_t interruptHeadED();
-    
+
     /**
     * Update the head ED for control transfers
     */
     void updateControlHeadED(uint32_t addr);
-    
+
     /**
     * Update the head ED for bulk transfers
     */
     void updateBulkHeadED(uint32_t addr);
-    
+
     /**
     * Update the head ED for interrupt transfers
     */
     void updateInterruptHeadED(uint32_t addr);
-    
+
     /**
     * Enable List for the specified endpoint type
     *
     * @param type enable the list of ENDPOINT_TYPE type
     */
     void enableList(ENDPOINT_TYPE type);
-    
+
     /**
     * Disable List for the specified endpoint type
     *
@@ -104,7 +104,7 @@
     * @param hub_parent reference to the hub where the device is connected (NULL if the hub parent is the root hub)
     */
     virtual void deviceConnected(int hub, int port, bool lowSpeed, USBHostHub * hub_parent = NULL) = 0;
-    
+
     /**
     * Virtual method called when a device has been disconnected
     *
@@ -114,35 +114,35 @@
     * @param addr list of the TDs which have been completed to dequeue freed TDs
     */
     virtual void deviceDisconnected(int hub, int port, USBHostHub * hub_parent, volatile uint32_t addr) = 0;
-    
+
     /**
     * Virtual method called when a transfer has been completed
     *
     * @param addr list of the TDs which have been completed
     */
     virtual void transferCompleted(volatile uint32_t addr) = 0;
-    
+
     /**
     * Find a memory section for a new ED
     *
     * @returns the address of the new ED
     */
     volatile uint8_t * getED();
-    
+
     /**
     * Find a memory section for a new TD
     *
     * @returns the address of the new TD
     */
     volatile uint8_t * getTD();
-    
+
     /**
     * Release a previous memory section reserved for an ED
     *
     * @param ed address of the ED
     */
     void freeED(volatile uint8_t * ed);
-    
+
     /**
     * Release a previous memory section reserved for an TD
     *
@@ -161,7 +161,7 @@
     uint8_t volatile  * usb_tdBuf;      //4 bytes aligned
 
     static USBHALHost * instHost;
-    
+
     bool volatile  edBufAlloc[MAX_ENDPOINT];
     bool volatile tdBufAlloc[MAX_TD];
 };