Renesas
SDG+USBHost(Mouse) Sample
Dependencies: Sound_Generator USBHost_custom
Fork of
SDG_Mouse_Sample
by 
GR-PEACH_producer_meeting
Information
Japanese version is available in lower part of this page.
このページの後半に日本語版が用意されています．
What is this?
This program is a demonstration that sounds the sound by mouse operation by using USBHost(Mouse) and Sound Generator.
Settings
Close JP3 of GR-PEACH.
Operation
| operation | effect |
|---|---|
| Right click | Sounds |
| Left click | Reset to base tone (C) |
| Moves the mouse to the right | Lower the sound |
| Moves the mouse to the left | Higher the sound |
| Center cursor | Adjust the sensitivity. Reset the reference value in the click. |
Others
The default setting of serial communication (baud rate etc.) in mbed is shown the following link.
Please refer to the link and change the settings of your PC terminal software.
The default value of baud rate in mbed is 9600, and this application uses baud rate 9600.
https://developer.mbed.org/teams/Renesas/wiki/GR-PEACH-Getting-Started#install-the-usb-serial-communication
概要
このプログラムは、USBHost(Mouse) + Sound Generatorで、マウス操作による擬似笛デモです。
設定
GR-PEACHのJP3をショートする必要があります。
操作方法
| 操作 | 内容 |
|---|---|
| 右クリック | 音出力開始 |
| 左クリック | 基準音(ド)にリセット |
| マウス右移動 | 高音になります |
| マウス左移動 | 低音になります |
| センターカーソル | 音高低の変化量調整(クリックで基準値にリセット) |
Others
mbedのシリアル通信(ボーレート等)のデフォルト設定は以下のリンクに示しています。
リンクを参考に、お使いのPCターミナルソフトの設定を変更して下さい。
mbedでのボーレートのデフォルト値は9600で、このサンプルではボーレート9600を使います。
https://developer.mbed.org/teams/Renesas/wiki/GR-PEACH-Getting-Started#install-the-usb-serial-communication
Diff: USBHost/TARGET_RENESAS/TARGET_RZ_A1H/src/userdef/usb0_host_ohci_wrapp_pipe.c
- Revision:
- 27:4206883f4cb7
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBHost/TARGET_RENESAS/TARGET_RZ_A1H/src/userdef/usb0_host_ohci_wrapp_pipe.c Mon Jan 19 14:30:37 2015 +0000
@@ -0,0 +1,156 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include "devdrv_usb_host_api.h"
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+
+
+/********************************************************************************************************/
+/* Endpoint Configuration Data Format */
+/********************************************************************************************************/
+/* LINE1: Pipe Window Select Register */
+/* CPU Access PIPE : PIPE1 to PIPE9 [ ### SET ### ] */
+/* LINE2: Pipe Configuration Register */
+/* Transfer Type : USB_HOST_NONE [ USB_HOST_NONE ] */
+/* Buffer Ready interrupt : USB_HOST_NONE [ USB_HOST_NONE ] */
+/* Double Buffer Mode : USB_HOST_CNT_ON / USB_HOST_CNT_OFF [ ### SET ### ] */
+/* Continuous Transmit: : USB_HOST_CNT_ON / USB_HOST_CNT_OFF [ ### SET ### ] */
+/* Short NAK : USB_HOST_NONE [ USB_HOST_NONE ] */
+/* Transfer Direction : USB_HOST_NONE [ USB_HOST_NONE ] */
+/* Endpoint Number : USB_HOST_NONE [ USB_HOST_NONE ] */
+/* LINE3: Pipe Buffer Configuration Register */
+/* Buffer Size : (uint16_t)((uint16_t)(((x) / 64) - 1) << 10) */
+/* [ ### SET ### ] */
+/* Buffer Top Number : (uint16_t)(x) [ ### SET ### ] */
+/* LINE4: Pipe Maxpacket Size Register */
+/* Max Packet Size : USB_HOST_NONE [ USB_HOST_NONE ] */
+/* LINE5: Pipe Cycle Configuration Register (0x6C) */
+/* ISO Buffer Flush Mode : USB_HOST_NONE [ USB_HOST_NONE ] */
+/* ISO Interval Value : USB_HOST_NONE [ USB_HOST_NONE ] */
+/* LINE6: use FIFO port */
+/* : USB_HOST_CUSE [ ### SET ### ] */
+/* : USB_HOST_D0USE / USB_HOST_D1USE */
+/* : USB_HOST_D0DMA / USB_HOST_D0DMA */
+/* LINE7: use FIFO port Endian : USB_HOST_FIFO_BIG / USB_HOST_FIFO_LITTLE [ #SET# ] */
+/********************************************************************************************************/
+
+/* Device Address 1 */
+USB_HOST_CFG_PIPETBL_t usb0_host_blk_ep_tbl1[ ] =
+{
+ {
+ USB_HOST_PIPE1,
+ /* TYPE / BFRE / DBLB / CNTMD / SHTNAK / DIR / EPNUM */
+ USB_HOST_NONE | USB_HOST_NONE | USB_HOST_DBLBON | USB_HOST_CNTMDON | USB_HOST_NONE | USB_HOST_NONE | USB_HOST_NONE,
+ (uint16_t)((uint16_t)(((1024) / 64) - 1) << 10) | (uint16_t)(8),
+ USB_HOST_NONE,
+ USB_HOST_NONE,
+ USB_HOST_D0USE
+ },
+
+ {
+ /* Pipe end */
+ 0xFFFF,
+ 0xFFFF,
+ 0xFFFF,
+ 0xFFFF,
+ 0xFFFF,
+ 0xFFFF
+ }
+};
+
+USB_HOST_CFG_PIPETBL_t usb0_host_int_ep_tbl1[ ] =
+{
+ {
+ USB_HOST_PIPE6,
+ /* TYPE / BFRE / DBLB / CNTMD / SHTNAK / DIR / EPNUM */
+ USB_HOST_NONE | USB_HOST_NONE | USB_HOST_DBLBON | USB_HOST_CNTMDON | USB_HOST_NONE | USB_HOST_NONE | USB_HOST_NONE,
+ (uint16_t)((uint16_t)(((64) / 64) - 1) << 10) | (uint16_t)(40),
+ USB_HOST_NONE,
+ USB_HOST_NONE,
+ USB_HOST_D1USE
+ },
+
+ {
+ USB_HOST_PIPE7,
+ /* TYPE / BFRE / DBLB / CNTMD / SHTNAK / DIR / EPNUM */
+ USB_HOST_NONE | USB_HOST_NONE | USB_HOST_DBLBON | USB_HOST_CNTMDON | USB_HOST_NONE | USB_HOST_NONE | USB_HOST_NONE,
+ (uint16_t)((uint16_t)(((64) / 64) - 1) << 10) | (uint16_t)(41),
+ USB_HOST_NONE,
+ USB_HOST_NONE,
+ USB_HOST_D1USE
+ },
+
+ {
+ USB_HOST_PIPE8,
+ /* TYPE / BFRE / DBLB / CNTMD / SHTNAK / DIR / EPNUM */
+ USB_HOST_NONE | USB_HOST_NONE | USB_HOST_DBLBON | USB_HOST_CNTMDON | USB_HOST_NONE | USB_HOST_NONE | USB_HOST_NONE,
+ (uint16_t)((uint16_t)(((64) / 64) - 1) << 10) | (uint16_t)(42),
+ USB_HOST_NONE,
+ USB_HOST_NONE,
+ USB_HOST_D1USE
+ },
+
+ {
+ USB_HOST_PIPE9,
+ /* TYPE / BFRE / DBLB / CNTMD / SHTNAK / DIR / EPNUM */
+ USB_HOST_NONE | USB_HOST_NONE | USB_HOST_DBLBON | USB_HOST_CNTMDON | USB_HOST_NONE | USB_HOST_NONE | USB_HOST_NONE,
+ (uint16_t)((uint16_t)(((64) / 64) - 1) << 10) | (uint16_t)(43),
+ USB_HOST_NONE,
+ USB_HOST_NONE,
+ USB_HOST_D1USE
+ },
+
+ {
+ /* Pipe end */
+ 0xFFFF,
+ 0xFFFF,
+ 0xFFFF,
+ 0xFFFF,
+ 0xFFFF,
+ 0xFFFF
+ }
+};
+
+/* End of File */