Renesas
SDG+USBHost(Mouse) Sample
Dependencies: Sound_Generator USBHost_custom
Fork of
SDG_Mouse_Sample
by 
GR-PEACH_producer_meeting
Information
Japanese version is available in lower part of this page.
このページの後半に日本語版が用意されています．
What is this?
This program is a demonstration that sounds the sound by mouse operation by using USBHost(Mouse) and Sound Generator.
Settings
Close JP3 of GR-PEACH.
Operation
| operation | effect |
|---|---|
| Right click | Sounds |
| Left click | Reset to base tone (C) |
| Moves the mouse to the right | Lower the sound |
| Moves the mouse to the left | Higher the sound |
| Center cursor | Adjust the sensitivity. Reset the reference value in the click. |
Others
The default setting of serial communication (baud rate etc.) in mbed is shown the following link.
Please refer to the link and change the settings of your PC terminal software.
The default value of baud rate in mbed is 9600, and this application uses baud rate 9600.
https://developer.mbed.org/teams/Renesas/wiki/GR-PEACH-Getting-Started#install-the-usb-serial-communication
概要
このプログラムは、USBHost(Mouse) + Sound Generatorで、マウス操作による擬似笛デモです。
設定
GR-PEACHのJP3をショートする必要があります。
操作方法
| 操作 | 内容 |
|---|---|
| 右クリック | 音出力開始 |
| 左クリック | 基準音(ド)にリセット |
| マウス右移動 | 高音になります |
| マウス左移動 | 低音になります |
| センターカーソル | 音高低の変化量調整(クリックで基準値にリセット) |
Others
mbedのシリアル通信(ボーレート等)のデフォルト設定は以下のリンクに示しています。
リンクを参考に、お使いのPCターミナルソフトの設定を変更して下さい。
mbedでのボーレートのデフォルト値は9600で、このサンプルではボーレート9600を使います。
https://developer.mbed.org/teams/Renesas/wiki/GR-PEACH-Getting-Started#install-the-usb-serial-communication
Diff: USBHost/TARGET_RENESAS/TARGET_RZ_A1H/inc/usb_host.h
- Revision:
- 27:4206883f4cb7
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBHost/TARGET_RENESAS/TARGET_RZ_A1H/inc/usb_host.h Mon Jan 19 14:30:37 2015 +0000
@@ -0,0 +1,201 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb_host.h
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Description : RZ/A1H R7S72100 USB Sample Program
+*******************************************************************************/
+#ifndef USB_HOST_H
+#define USB_HOST_H
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include "r_typedefs.h"
+#include "iodefine.h"
+#include "rza_io_regrw.h"
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+#define USB_HOST_DEVICE_0 (0u)
+#define USB_HOST_DEVICE_1 (1u)
+#define USB_HOST_DEVICE_2 (2u)
+#define USB_HOST_DEVICE_3 (3u)
+#define USB_HOST_DEVICE_4 (4u)
+#define USB_HOST_DEVICE_5 (5u)
+#define USB_HOST_DEVICE_6 (6u)
+#define USB_HOST_DEVICE_7 (7u)
+#define USB_HOST_DEVICE_8 (8u)
+#define USB_HOST_DEVICE_9 (9u)
+#define USB_HOST_DEVICE_10 (10u)
+
+#define USB_HOST_ENDPOINT_DESC (0x05)
+
+#define USB_HOST_BITUPLLE (0x0002u)
+#define USB_HOST_BITUCKSEL (0x0004u)
+#define USB_HOST_BITBWAIT (0x003fu)
+
+#define USB_HOST_BUSWAIT_02 (0x0000u)
+#define USB_HOST_BUSWAIT_03 (0x0001u)
+#define USB_HOST_BUSWAIT_04 (0x0002u)
+#define USB_HOST_BUSWAIT_05 (0x0003u)
+#define USB_HOST_BUSWAIT_06 (0x0004u)
+#define USB_HOST_BUSWAIT_07 (0x0005u)
+#define USB_HOST_BUSWAIT_08 (0x0006u)
+#define USB_HOST_BUSWAIT_09 (0x0007u)
+#define USB_HOST_BUSWAIT_10 (0x0008u)
+#define USB_HOST_BUSWAIT_11 (0x0009u)
+#define USB_HOST_BUSWAIT_12 (0x000au)
+#define USB_HOST_BUSWAIT_13 (0x000bu)
+#define USB_HOST_BUSWAIT_14 (0x000cu)
+#define USB_HOST_BUSWAIT_15 (0x000du)
+#define USB_HOST_BUSWAIT_16 (0x000eu)
+#define USB_HOST_BUSWAIT_17 (0x000fu)
+
+#define USB_HOST_FS_JSTS (0x0001u)
+#define USB_HOST_LS_JSTS (0x0002u)
+
+#define USB_HOST_BITRST (0x0040u)
+#define USB_HOST_BITRESUME (0x0020u)
+#define USB_HOST_BITUACT (0x0010u)
+#define USB_HOST_HSPROC (0x0004u)
+#define USB_HOST_HSMODE (0x0003u)
+#define USB_HOST_FSMODE (0x0002u)
+#define USB_HOST_LSMODE (0x0001u)
+#define USB_HOST_UNDECID (0x0000u)
+
+#define USB_HOST_BITRCNT (0x8000u)
+#define USB_HOST_BITDREQE (0x1000u)
+#define USB_HOST_BITMBW (0x0c00u)
+#define USB_HOST_BITMBW_8 (0x0000u)
+#define USB_HOST_BITMBW_16 (0x0400u)
+#define USB_HOST_BITMBW_32 (0x0800u)
+#define USB_HOST_BITBYTE_LITTLE (0x0000u)
+#define USB_HOST_BITBYTE_BIG (0x0100u)
+#define USB_HOST_BITISEL (0x0020u)
+#define USB_HOST_BITCURPIPE (0x000fu)
+
+#define USB_HOST_CFIFO_READ (0x0000u)
+#define USB_HOST_CFIFO_WRITE (0x0020u)
+
+#define USB_HOST_BITBVAL (0x8000u)
+#define USB_HOST_BITBCLR (0x4000u)
+#define USB_HOST_BITFRDY (0x2000u)
+#define USB_HOST_BITDTLN (0x0fffu)
+
+#define USB_HOST_BITBEMPE (0x0400u)
+#define USB_HOST_BITNRDYE (0x0200u)
+#define USB_HOST_BITBRDYE (0x0100u)
+#define USB_HOST_BITBEMP (0x0400u)
+#define USB_HOST_BITNRDY (0x0200u)
+#define USB_HOST_BITBRDY (0x0100u)
+
+#define USB_HOST_BITBCHGE (0x4000u)
+#define USB_HOST_BITDTCHE (0x1000u)
+#define USB_HOST_BITATTCHE (0x0800u)
+#define USB_HOST_BITEOFERRE (0x0040u)
+#define USB_HOST_BITBCHG (0x4000u)
+#define USB_HOST_BITDTCH (0x1000u)
+#define USB_HOST_BITATTCH (0x0800u)
+#define USB_HOST_BITEOFERR (0x0040u)
+
+#define USB_HOST_BITSIGNE (0x0020u)
+#define USB_HOST_BITSACKE (0x0010u)
+#define USB_HOST_BITSIGN (0x0020u)
+#define USB_HOST_BITSACK (0x0010u)
+
+#define USB_HOST_BITSUREQ (0x4000u)
+#define USB_HOST_BITSQSET (0x0080u)
+#define USB_HOST_PID_STALL2 (0x0003u)
+#define USB_HOST_PID_STALL (0x0002u)
+#define USB_HOST_PID_BUF (0x0001u)
+#define USB_HOST_PID_NAK (0x0000u)
+
+#define USB_HOST_PIPExBUF (64u)
+
+#define USB_HOST_D0FIFO (0)
+#define USB_HOST_D1FIFO (1)
+#define USB_HOST_DMA_READY (0)
+#define USB_HOST_DMA_BUSY (1)
+#define USB_HOST_DMA_BUSYEND (2)
+
+#define USB_HOST_FIFO_USE (0x7000)
+
+#define USB_HOST_FIFOERROR (0xffff)
+#define USB_HOST_WRITEEND (0)
+#define USB_HOST_WRITESHRT (1)
+#define USB_HOST_WRITING (2)
+#define USB_HOST_WRITEDMA (3)
+#define USB_HOST_READEND (0)
+#define USB_HOST_READSHRT (1)
+#define USB_HOST_READING (2)
+#define USB_HOST_READOVER (3)
+#define USB_HOST_READZERO (4)
+
+#define USB_HOST_CMD_IDLE (0x0000)
+#define USB_HOST_CMD_DOING (0x0001)
+#define USB_HOST_CMD_DONE (0x0002)
+#define USB_HOST_CMD_NORES (0x0003)
+#define USB_HOST_CMD_STALL (0x0004)
+#define USB_HOST_CMD_FIELD (0x000f)
+
+#if 0
+#define USB_HOST_CHG_CMDFIELD( r, v ) do { r &= ( ~USB_HOST_CMD_FIELD ); \
+ r |= v; } while(0)
+#endif
+
+#define USB_HOST_MODE_WRITE (0x0100)
+#define USB_HOST_MODE_READ (0x0200)
+#define USB_HOST_MODE_NO_DATA (0x0300)
+#define USB_HOST_MODE_FIELD (0x0f00)
+
+#define USB_HOST_STAGE_SETUP (0x0010)
+#define USB_HOST_STAGE_DATA (0x0020)
+#define USB_HOST_STAGE_STATUS (0x0030)
+#define USB_HOST_STAGE_FIELD (0x00f0)
+
+#if 0
+#define USB_HOST_CHG_STAGEFIELD( r, v ) do { r &= ( ~USB_HOST_STAGE_FIELD ); \
+ r |= v; } while(0)
+#endif
+
+#define USB_HOST_DEVADD_MASK (0x7fc0)
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+extern uint16_t g_usb_host_elt_clockmode;
+
+#endif /* USB_HOST_H */
+
+/* End of File */