Renesas
SDG+USBHost(Mouse) Sample
Dependencies: Sound_Generator USBHost_custom
Fork of
SDG_Mouse_Sample
by 
GR-PEACH_producer_meeting
Information
Japanese version is available in lower part of this page.
このページの後半に日本語版が用意されています．
What is this?
This program is a demonstration that sounds the sound by mouse operation by using USBHost(Mouse) and Sound Generator.
Settings
Close JP3 of GR-PEACH.
Operation
| operation | effect |
|---|---|
| Right click | Sounds |
| Left click | Reset to base tone (C) |
| Moves the mouse to the right | Lower the sound |
| Moves the mouse to the left | Higher the sound |
| Center cursor | Adjust the sensitivity. Reset the reference value in the click. |
Others
The default setting of serial communication (baud rate etc.) in mbed is shown the following link.
Please refer to the link and change the settings of your PC terminal software.
The default value of baud rate in mbed is 9600, and this application uses baud rate 9600.
https://developer.mbed.org/teams/Renesas/wiki/GR-PEACH-Getting-Started#install-the-usb-serial-communication
概要
このプログラムは、USBHost(Mouse) + Sound Generatorで、マウス操作による擬似笛デモです。
設定
GR-PEACHのJP3をショートする必要があります。
操作方法
| 操作 | 内容 |
|---|---|
| 右クリック | 音出力開始 |
| 左クリック | 基準音(ド)にリセット |
| マウス右移動 | 高音になります |
| マウス左移動 | 低音になります |
| センターカーソル | 音高低の変化量調整(クリックで基準値にリセット) |
Others
mbedのシリアル通信(ボーレート等)のデフォルト設定は以下のリンクに示しています。
リンクを参考に、お使いのPCターミナルソフトの設定を変更して下さい。
mbedでのボーレートのデフォルト値は9600で、このサンプルではボーレート9600を使います。
https://developer.mbed.org/teams/Renesas/wiki/GR-PEACH-Getting-Started#install-the-usb-serial-communication
Diff: USBHost3GModule/WANDongle.cpp
- Revision:
- 18:37c948cf0dbf
- Parent:
- 17:c7b1b8451598
- Child:
- 23:759ec18ee1a7
--- a/USBHost3GModule/WANDongle.cpp Wed Oct 16 14:15:18 2013 +0100
+++ b/USBHost3GModule/WANDongle.cpp Thu Oct 17 10:15:19 2013 +0100
@@ -25,8 +25,8 @@
#define __MODULE__ "WANDongle.cpp"
#endif
-#include "core/dbg.h"
-#include <cstdint>
+#include "dbg.h"
+#include <stdint.h>
#include "rtos.h"
#include "WANDongle.h"
@@ -47,7 +47,7 @@
{
//FIXME should run on USB thread
- DBG("Trying to connect device");
+ USB_DBG("Trying to connect device");
if (dev_connected) {
return true;
@@ -61,23 +61,23 @@
{
m_pInitializer = NULL; //Will be set in setVidPid callback
- DBG("Enumerate");
+ USB_DBG("Enumerate");
int ret = host->enumerate(dev, this);
if(ret)
{
return false;
}
- DBG("Device has VID:%04x PID:%04x", dev->getVid(), dev->getPid());
+ USB_DBG("Device has VID:%04x PID:%04x", dev->getVid(), dev->getPid());
if(m_pInitializer) //If an initializer has been found
{
- DBG("m_pInitializer=%p", m_pInitializer);
- DBG("m_pInitializer->getSerialVid()=%04x", m_pInitializer->getSerialVid());
- DBG("m_pInitializer->getSerialPid()=%04x", m_pInitializer->getSerialPid());
+ USB_DBG("m_pInitializer=%p", m_pInitializer);
+ USB_DBG("m_pInitializer->getSerialVid()=%04x", m_pInitializer->getSerialVid());
+ USB_DBG("m_pInitializer->getSerialPid()=%04x", m_pInitializer->getSerialPid());
if ((dev->getVid() == m_pInitializer->getSerialVid()) && (dev->getPid() == m_pInitializer->getSerialPid()))
{
- DBG("The dongle is in virtual serial mode");
+ USB_DBG("The dongle is in virtual serial mode");
host->registerDriver(dev, 0, this, &WANDongle::init);
m_serialCount = m_pInitializer->getSerialPortCount();
if( m_serialCount > WANDONGLE_MAX_SERIAL_PORTS )
@@ -86,13 +86,13 @@
}
for(int j = 0; j < m_serialCount; j++)
{
- DBG("Connecting serial port #%d", j+1);
- DBG("Ep %p", m_pInitializer->getEp(dev, j, false));
- DBG("Ep %p", m_pInitializer->getEp(dev, j, true));
+ USB_DBG("Connecting serial port #%d", j+1);
+ USB_DBG("Ep %p", m_pInitializer->getEp(dev, j, false));
+ USB_DBG("Ep %p", m_pInitializer->getEp(dev, j, true));
m_serial[j].connect( dev, m_pInitializer->getEp(dev, j, false), m_pInitializer->getEp(dev, j, true) );
}
- DBG("Device connected");
+ USB_DBG("Device connected");
dev_connected = true;
@@ -101,16 +101,16 @@
}
else if ((dev->getVid() == m_pInitializer->getMSDVid()) && (dev->getPid() == m_pInitializer->getMSDPid()))
{
- DBG("Vodafone K3370 dongle detected in MSD mode");
+ USB_DBG("Vodafone K3370 dongle detected in MSD mode");
//Try to switch
if( m_pInitializer->switchMode(dev) )
{
- DBG("Switched OK");
+ USB_DBG("Switched OK");
return false; //Will be connected on a next iteration
}
else
{
- ERR("Could not switch mode");
+ USB_ERR("Could not switch mode");
return false;
}
}
@@ -168,21 +168,21 @@
{
WANDongleInitializer* initializer;
- for(unsigned i = 0; i < m_totalInitializers; i++)
+ for(int i = 0; i < m_totalInitializers; i++)
{
initializer = m_Initializers[i];
- DBG("initializer=%p", initializer);
- DBG("initializer->getSerialVid()=%04x", initializer->getSerialVid());
- DBG("initializer->getSerialPid()=%04x", initializer->getSerialPid());
+ USB_DBG("initializer=%p", initializer);
+ USB_DBG("initializer->getSerialVid()=%04x", initializer->getSerialVid());
+ USB_DBG("initializer->getSerialPid()=%04x", initializer->getSerialPid());
if ((dev->getVid() == initializer->getSerialVid()) && (dev->getPid() == initializer->getSerialPid()))
{
- DBG("The dongle is in virtual serial mode");
+ USB_DBG("The dongle is in virtual serial mode");
m_pInitializer = initializer;
break;
}
else if ((dev->getVid() == initializer->getMSDVid()) && (dev->getPid() == initializer->getMSDPid()))
{
- DBG("Dongle detected in MSD mode");
+ USB_DBG("Dongle detected in MSD mode");
m_pInitializer = initializer;
break;
}
@@ -229,7 +229,7 @@
WANDongle::~WANDongle()
{
- for(unsigned i = 0; i < m_totalInitializers; i++)
+ for(int i = 0; i < m_totalInitializers; i++)
delete m_Initializers[i];
}