SDG+USBHost(Mouse) Sample

Dependencies:   Sound_Generator USBHost_custom

Fork of SDG_Mouse_Sample by GR-PEACH_producer_meeting

Information

Japanese version is available in lower part of this page.
このページの後半に日本語版が用意されています.

What is this?

This program is a demonstration that sounds the sound by mouse operation by using USBHost(Mouse) and Sound Generator.

Settings

Close JP3 of GR-PEACH.
/media/uploads/RyoheiHagimoto/sdg-mouse.jpg

Operation

operationeffect
Right clickSounds
Left clickReset to base tone (C)
Moves the mouse to the rightLower the sound
Moves the mouse to the leftHigher the sound
Center cursorAdjust the sensitivity.
Reset the reference value in the click.

Others

The default setting of serial communication (baud rate etc.) in mbed is shown the following link.
Please refer to the link and change the settings of your PC terminal software.
The default value of baud rate in mbed is 9600, and this application uses baud rate 9600.
https://developer.mbed.org/teams/Renesas/wiki/GR-PEACH-Getting-Started#install-the-usb-serial-communication


概要

このプログラムは、USBHost(Mouse) + Sound Generatorで、マウス操作による擬似笛デモです。

設定

GR-PEACHのJP3をショートする必要があります。
/media/uploads/RyoheiHagimoto/sdg-mouse.jpg

操作方法

操作内容
右クリック音出力開始
左クリック基準音(ド)にリセット
マウス右移動高音になります
マウス左移動低音になります
センターカーソル音高低の変化量調整(クリックで基準値にリセット)

Others

mbedのシリアル通信(ボーレート等)のデフォルト設定は以下のリンクに示しています。
リンクを参考に、お使いのPCターミナルソフトの設定を変更して下さい。
mbedでのボーレートのデフォルト値は9600で、このサンプルではボーレート9600を使います。
https://developer.mbed.org/teams/Renesas/wiki/GR-PEACH-Getting-Started#install-the-usb-serial-communication

Committer:
samux
Date:
Thu Mar 14 11:49:53 2013 +0000
Revision:
8:93da8ea2708b
Parent:
4:b320d68e98e7
Child:
13:b58a2204422f
update doc + license

Who changed what in which revision?

UserRevisionLine numberNew contents of line
samux 8:93da8ea2708b 1 /* mbed USBHost Library
samux 8:93da8ea2708b 2 * Copyright (c) 2006-2013 ARM Limited
samux 8:93da8ea2708b 3 *
samux 8:93da8ea2708b 4 * Licensed under the Apache License, Version 2.0 (the "License");
samux 8:93da8ea2708b 5 * you may not use this file except in compliance with the License.
samux 8:93da8ea2708b 6 * You may obtain a copy of the License at
samux 8:93da8ea2708b 7 *
samux 8:93da8ea2708b 8 * http://www.apache.org/licenses/LICENSE-2.0
samux 8:93da8ea2708b 9 *
samux 8:93da8ea2708b 10 * Unless required by applicable law or agreed to in writing, software
samux 8:93da8ea2708b 11 * distributed under the License is distributed on an "AS IS" BASIS,
samux 8:93da8ea2708b 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
samux 8:93da8ea2708b 13 * See the License for the specific language governing permissions and
samux 8:93da8ea2708b 14 * limitations under the License.
samux 8:93da8ea2708b 15 */
mbed_official 0:a554658735bf 16
mbed_official 0:a554658735bf 17 #ifndef USBHOSTMSD_H
mbed_official 0:a554658735bf 18 #define USBHOSTMSD_H
mbed_official 0:a554658735bf 19
mbed_official 0:a554658735bf 20 #include "USBHostConf.h"
mbed_official 0:a554658735bf 21
mbed_official 0:a554658735bf 22 #if USBHOST_MSD
mbed_official 0:a554658735bf 23
mbed_official 0:a554658735bf 24 #include "USBHost.h"
mbed_official 0:a554658735bf 25 #include "FATFileSystem.h"
mbed_official 0:a554658735bf 26
mbed_official 0:a554658735bf 27 /**
samux 1:0a457e34fa9e 28 * A class to communicate a USB flash disk
mbed_official 0:a554658735bf 29 */
mbed_official 0:a554658735bf 30 class USBHostMSD : public IUSBEnumerator, public FATFileSystem {
mbed_official 0:a554658735bf 31 public:
mbed_official 0:a554658735bf 32 /**
mbed_official 0:a554658735bf 33 * Constructor
mbed_official 0:a554658735bf 34 *
mbed_official 0:a554658735bf 35 * @param rootdir mount name
mbed_official 0:a554658735bf 36 */
mbed_official 0:a554658735bf 37 USBHostMSD(const char * rootdir);
mbed_official 0:a554658735bf 38
mbed_official 0:a554658735bf 39 /**
mbed_official 0:a554658735bf 40 * Check if a MSD device is connected
mbed_official 0:a554658735bf 41 *
mbed_official 0:a554658735bf 42 * @return true if a MSD device is connected
mbed_official 0:a554658735bf 43 */
mbed_official 0:a554658735bf 44 bool connected();
mbed_official 0:a554658735bf 45
samux 3:0f5c32575eb8 46 /**
mbed_official 0:a554658735bf 47 * Try to connect to a MSD device
mbed_official 0:a554658735bf 48 *
samux 3:0f5c32575eb8 49 * @return true if connection was successful
mbed_official 0:a554658735bf 50 */
mbed_official 0:a554658735bf 51 bool connect();
mbed_official 0:a554658735bf 52
mbed_official 0:a554658735bf 53 protected:
mbed_official 0:a554658735bf 54 //From IUSBEnumerator
mbed_official 0:a554658735bf 55 virtual void setVidPid(uint16_t vid, uint16_t pid);
mbed_official 0:a554658735bf 56 virtual bool parseInterface(uint8_t intf_nb, uint8_t intf_class, uint8_t intf_subclass, uint8_t intf_protocol); //Must return true if the interface should be parsed
mbed_official 0:a554658735bf 57 virtual bool useEndpoint(uint8_t intf_nb, ENDPOINT_TYPE type, ENDPOINT_DIRECTION dir); //Must return true if the endpoint will be used
mbed_official 0:a554658735bf 58
mbed_official 0:a554658735bf 59 // From FATFileSystem
mbed_official 0:a554658735bf 60 virtual int disk_initialize();
mbed_official 0:a554658735bf 61 virtual int disk_status() {return 0;};
mbed_official 0:a554658735bf 62 virtual int disk_read(uint8_t * buffer, uint64_t sector);
mbed_official 0:a554658735bf 63 virtual int disk_write(const uint8_t * buffer, uint64_t sector);
mbed_official 0:a554658735bf 64 virtual int disk_sync() {return 0;};
mbed_official 0:a554658735bf 65 virtual uint64_t disk_sectors();
mbed_official 0:a554658735bf 66
mbed_official 0:a554658735bf 67 private:
mbed_official 0:a554658735bf 68 USBHost * host;
mbed_official 0:a554658735bf 69 USBDeviceConnected * dev;
mbed_official 0:a554658735bf 70 bool dev_connected;
mbed_official 0:a554658735bf 71 USBEndpoint * bulk_in;
mbed_official 0:a554658735bf 72 USBEndpoint * bulk_out;
samux 4:b320d68e98e7 73 uint8_t nb_ep;
mbed_official 0:a554658735bf 74
mbed_official 0:a554658735bf 75 // Bulk-only CBW
mbed_official 0:a554658735bf 76 typedef __packed struct {
mbed_official 0:a554658735bf 77 uint32_t Signature;
mbed_official 0:a554658735bf 78 uint32_t Tag;
mbed_official 0:a554658735bf 79 uint32_t DataLength;
mbed_official 0:a554658735bf 80 uint8_t Flags;
mbed_official 0:a554658735bf 81 uint8_t LUN;
mbed_official 0:a554658735bf 82 uint8_t CBLength;
mbed_official 0:a554658735bf 83 uint8_t CB[16];
mbed_official 0:a554658735bf 84 } CBW;
mbed_official 0:a554658735bf 85
mbed_official 0:a554658735bf 86 // Bulk-only CSW
mbed_official 0:a554658735bf 87 typedef __packed struct {
mbed_official 0:a554658735bf 88 uint32_t Signature;
mbed_official 0:a554658735bf 89 uint32_t Tag;
mbed_official 0:a554658735bf 90 uint32_t DataResidue;
mbed_official 0:a554658735bf 91 uint8_t Status;
mbed_official 0:a554658735bf 92 } CSW;
mbed_official 0:a554658735bf 93
mbed_official 0:a554658735bf 94 CBW cbw;
mbed_official 0:a554658735bf 95 CSW csw;
mbed_official 0:a554658735bf 96
mbed_official 0:a554658735bf 97 int SCSITransfer(uint8_t * cmd, uint8_t cmd_len, int flags, uint8_t * data, uint32_t transfer_len);
mbed_official 0:a554658735bf 98 int testUnitReady();
mbed_official 0:a554658735bf 99 int readCapacity();
mbed_official 0:a554658735bf 100 int inquiry(uint8_t lun, uint8_t page_code);
mbed_official 0:a554658735bf 101 int SCSIRequestSense();
mbed_official 0:a554658735bf 102 int dataTransfer(uint8_t * buf, uint32_t block, uint8_t nbBlock, int direction);
mbed_official 0:a554658735bf 103 int checkResult(uint8_t res, USBEndpoint * ep);
samux 4:b320d68e98e7 104 int getMaxLun();
mbed_official 0:a554658735bf 105
mbed_official 0:a554658735bf 106 int blockSize;
mbed_official 0:a554658735bf 107 uint64_t blockCount;
mbed_official 0:a554658735bf 108
mbed_official 0:a554658735bf 109 int msd_intf;
mbed_official 0:a554658735bf 110 bool msd_device_found;
mbed_official 0:a554658735bf 111 bool disk_init;
mbed_official 0:a554658735bf 112
mbed_official 0:a554658735bf 113 void init();
mbed_official 0:a554658735bf 114
mbed_official 0:a554658735bf 115 };
mbed_official 0:a554658735bf 116
mbed_official 0:a554658735bf 117 #endif
mbed_official 0:a554658735bf 118
mbed_official 0:a554658735bf 119 #endif