SDG+USBHost(Mouse) Sample

Dependencies:   Sound_Generator USBHost_custom

Fork of SDG_Mouse_Sample by GR-PEACH_producer_meeting

Information

Japanese version is available in lower part of this page.
このページの後半に日本語版が用意されています.

What is this?

This program is a demonstration that sounds the sound by mouse operation by using USBHost(Mouse) and Sound Generator.

Settings

Close JP3 of GR-PEACH.
/media/uploads/RyoheiHagimoto/sdg-mouse.jpg

Operation

operationeffect
Right clickSounds
Left clickReset to base tone (C)
Moves the mouse to the rightLower the sound
Moves the mouse to the leftHigher the sound
Center cursorAdjust the sensitivity.
Reset the reference value in the click.

Others

The default setting of serial communication (baud rate etc.) in mbed is shown the following link.
Please refer to the link and change the settings of your PC terminal software.
The default value of baud rate in mbed is 9600, and this application uses baud rate 9600.
https://developer.mbed.org/teams/Renesas/wiki/GR-PEACH-Getting-Started#install-the-usb-serial-communication


概要

このプログラムは、USBHost(Mouse) + Sound Generatorで、マウス操作による擬似笛デモです。

設定

GR-PEACHのJP3をショートする必要があります。
/media/uploads/RyoheiHagimoto/sdg-mouse.jpg

操作方法

操作内容
右クリック音出力開始
左クリック基準音(ド)にリセット
マウス右移動高音になります
マウス左移動低音になります
センターカーソル音高低の変化量調整(クリックで基準値にリセット)

Others

mbedのシリアル通信(ボーレート等)のデフォルト設定は以下のリンクに示しています。
リンクを参考に、お使いのPCターミナルソフトの設定を変更して下さい。
mbedでのボーレートのデフォルト値は9600で、このサンプルではボーレート9600を使います。
https://developer.mbed.org/teams/Renesas/wiki/GR-PEACH-Getting-Started#install-the-usb-serial-communication

Committer:
mbed_official
Date:
Tue Jun 03 11:30:38 2014 +0100
Revision:
24:868cbfe611a7
Parent:
8:93da8ea2708b
Synchronized with git revision bcacbb9fbf3432829227430830cca4315b57c1b9

Full URL: https://github.com/mbedmicro/mbed/commit/bcacbb9fbf3432829227430830cca4315b57c1b9/

Who changed what in which revision?

UserRevisionLine numberNew contents of line
samux 8:93da8ea2708b 1 /* mbed USBHost Library
samux 8:93da8ea2708b 2 * Copyright (c) 2006-2013 ARM Limited
samux 8:93da8ea2708b 3 *
samux 8:93da8ea2708b 4 * Licensed under the Apache License, Version 2.0 (the "License");
samux 8:93da8ea2708b 5 * you may not use this file except in compliance with the License.
samux 8:93da8ea2708b 6 * You may obtain a copy of the License at
samux 8:93da8ea2708b 7 *
samux 8:93da8ea2708b 8 * http://www.apache.org/licenses/LICENSE-2.0
samux 8:93da8ea2708b 9 *
samux 8:93da8ea2708b 10 * Unless required by applicable law or agreed to in writing, software
samux 8:93da8ea2708b 11 * distributed under the License is distributed on an "AS IS" BASIS,
samux 8:93da8ea2708b 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
samux 8:93da8ea2708b 13 * See the License for the specific language governing permissions and
samux 8:93da8ea2708b 14 * limitations under the License.
samux 8:93da8ea2708b 15 */
mbed_official 0:a554658735bf 16
mbed_official 0:a554658735bf 17 #ifndef USBHOSTHUB_H
mbed_official 0:a554658735bf 18 #define USBHOSTHUB_H
mbed_official 0:a554658735bf 19
mbed_official 0:a554658735bf 20 #include "USBHostConf.h"
mbed_official 0:a554658735bf 21
mbed_official 0:a554658735bf 22 #if MAX_HUB_NB
mbed_official 0:a554658735bf 23
mbed_official 0:a554658735bf 24 #include "USBHostTypes.h"
mbed_official 0:a554658735bf 25 #include "IUSBEnumerator.h"
mbed_official 0:a554658735bf 26
mbed_official 0:a554658735bf 27 class USBHost;
mbed_official 0:a554658735bf 28 class USBDeviceConnected;
mbed_official 0:a554658735bf 29 class USBEndpoint;
mbed_official 0:a554658735bf 30
mbed_official 24:868cbfe611a7 31 /**
mbed_official 0:a554658735bf 32 * A class to use a USB Hub
mbed_official 0:a554658735bf 33 */
mbed_official 0:a554658735bf 34 class USBHostHub : public IUSBEnumerator {
mbed_official 0:a554658735bf 35 public:
mbed_official 0:a554658735bf 36 /**
mbed_official 0:a554658735bf 37 * Constructor
mbed_official 0:a554658735bf 38 */
mbed_official 0:a554658735bf 39 USBHostHub();
mbed_official 0:a554658735bf 40
mbed_official 0:a554658735bf 41 /**
mbed_official 0:a554658735bf 42 * Check if a USB Hub is connected
mbed_official 0:a554658735bf 43 *
mbed_official 0:a554658735bf 44 * @return true if a serial device is connected
mbed_official 0:a554658735bf 45 */
mbed_official 0:a554658735bf 46 bool connected();
mbed_official 0:a554658735bf 47
mbed_official 0:a554658735bf 48 /**
mbed_official 0:a554658735bf 49 * Try to connect device
mbed_official 0:a554658735bf 50 *
mbed_official 0:a554658735bf 51 * @param dev device to connect
mbed_official 0:a554658735bf 52 * @return true if connection was successful
mbed_official 0:a554658735bf 53 */
mbed_official 0:a554658735bf 54 bool connect(USBDeviceConnected * dev);
mbed_official 24:868cbfe611a7 55
mbed_official 0:a554658735bf 56 /**
mbed_official 0:a554658735bf 57 * Automatically called by USBHost when a device
mbed_official 0:a554658735bf 58 * has been enumerated by usb_thread
mbed_official 0:a554658735bf 59 *
mbed_official 0:a554658735bf 60 * @param dev device connected
mbed_official 0:a554658735bf 61 */
mbed_official 0:a554658735bf 62 void deviceConnected(USBDeviceConnected * dev);
mbed_official 24:868cbfe611a7 63
mbed_official 0:a554658735bf 64 /**
mbed_official 0:a554658735bf 65 * Automatically called by USBHost when a device
mbed_official 0:a554658735bf 66 * has been disconnected from this hub
mbed_official 0:a554658735bf 67 *
samux 3:0f5c32575eb8 68 * @param dev device disconnected
mbed_official 0:a554658735bf 69 */
mbed_official 0:a554658735bf 70 void deviceDisconnected(USBDeviceConnected * dev);
mbed_official 24:868cbfe611a7 71
mbed_official 0:a554658735bf 72 /**
mbed_official 0:a554658735bf 73 * Rest a specific port
mbed_official 0:a554658735bf 74 *
mbed_official 0:a554658735bf 75 * @param port port number
mbed_official 0:a554658735bf 76 */
mbed_official 0:a554658735bf 77 void portReset(uint8_t port);
mbed_official 24:868cbfe611a7 78
mbed_official 0:a554658735bf 79 /*
mbed_official 0:a554658735bf 80 * Called by USBHost to set the instance of USBHost
mbed_official 0:a554658735bf 81 *
mbed_official 0:a554658735bf 82 * @param host host instance
mbed_official 0:a554658735bf 83 */
mbed_official 0:a554658735bf 84 void setHost(USBHost * host);
mbed_official 24:868cbfe611a7 85
mbed_official 0:a554658735bf 86 /**
mbed_official 0:a554658735bf 87 * Called by USBhost when a hub has been disconnected
mbed_official 0:a554658735bf 88 */
mbed_official 0:a554658735bf 89 void hubDisconnected();
mbed_official 0:a554658735bf 90
mbed_official 0:a554658735bf 91 protected:
mbed_official 0:a554658735bf 92 //From IUSBEnumerator
mbed_official 0:a554658735bf 93 virtual void setVidPid(uint16_t vid, uint16_t pid);
mbed_official 0:a554658735bf 94 virtual bool parseInterface(uint8_t intf_nb, uint8_t intf_class, uint8_t intf_subclass, uint8_t intf_protocol); //Must return true if the interface should be parsed
mbed_official 0:a554658735bf 95 virtual bool useEndpoint(uint8_t intf_nb, ENDPOINT_TYPE type, ENDPOINT_DIRECTION dir); //Must return true if the endpoint will be used
mbed_official 0:a554658735bf 96
mbed_official 0:a554658735bf 97 private:
mbed_official 0:a554658735bf 98 USBHost * host;
mbed_official 0:a554658735bf 99 USBDeviceConnected * dev;
mbed_official 0:a554658735bf 100 bool dev_connected;
mbed_official 0:a554658735bf 101 USBEndpoint * int_in;
mbed_official 0:a554658735bf 102 uint8_t nb_port;
mbed_official 0:a554658735bf 103 uint8_t hub_characteristics;
mbed_official 0:a554658735bf 104
mbed_official 0:a554658735bf 105 void rxHandler();
mbed_official 0:a554658735bf 106
mbed_official 0:a554658735bf 107 uint8_t buf[sizeof(HubDescriptor)];
mbed_official 0:a554658735bf 108
mbed_official 0:a554658735bf 109 int hub_intf;
mbed_official 0:a554658735bf 110 bool hub_device_found;
mbed_official 0:a554658735bf 111
mbed_official 0:a554658735bf 112 void setPortFeature(uint32_t feature, uint8_t port);
mbed_official 0:a554658735bf 113 void clearPortFeature(uint32_t feature, uint8_t port);
mbed_official 0:a554658735bf 114 uint32_t getPortStatus(uint8_t port);
mbed_official 0:a554658735bf 115
mbed_official 0:a554658735bf 116 USBDeviceConnected * device_children[MAX_HUB_PORT];
mbed_official 24:868cbfe611a7 117
mbed_official 0:a554658735bf 118 void init();
mbed_official 0:a554658735bf 119 void disconnect();
mbed_official 0:a554658735bf 120
mbed_official 0:a554658735bf 121 };
mbed_official 0:a554658735bf 122
mbed_official 0:a554658735bf 123 #endif
mbed_official 0:a554658735bf 124
mbed_official 0:a554658735bf 125 #endif