SDG+USBHost(Mouse) Sample
Dependencies: Sound_Generator USBHost_custom
Fork of SDG_Mouse_Sample by
Information
Japanese version is available in lower part of this page.
このページの後半に日本語版が用意されています.
What is this?
This program is a demonstration that sounds the sound by mouse operation by using USBHost(Mouse) and Sound Generator.
Settings
Close JP3 of GR-PEACH.
Operation
| operation | effect |
|---|---|
| Right click | Sounds |
| Left click | Reset to base tone (C) |
| Moves the mouse to the right | Lower the sound |
| Moves the mouse to the left | Higher the sound |
| Center cursor | Adjust the sensitivity. Reset the reference value in the click. |
Others
The default setting of serial communication (baud rate etc.) in mbed is shown the following link.
Please refer to the link and change the settings of your PC terminal software.
The default value of baud rate in mbed is 9600, and this application uses baud rate 9600.
https://developer.mbed.org/teams/Renesas/wiki/GR-PEACH-Getting-Started#install-the-usb-serial-communication
概要
このプログラムは、USBHost(Mouse) + Sound Generatorで、マウス操作による擬似笛デモです。
設定
GR-PEACHのJP3をショートする必要があります。
操作方法
| 操作 | 内容 |
|---|---|
| 右クリック | 音出力開始 |
| 左クリック | 基準音(ド)にリセット |
| マウス右移動 | 高音になります |
| マウス左移動 | 低音になります |
| センターカーソル | 音高低の変化量調整(クリックで基準値にリセット) |
Others
mbedのシリアル通信(ボーレート等)のデフォルト設定は以下のリンクに示しています。
リンクを参考に、お使いのPCターミナルソフトの設定を変更して下さい。
mbedでのボーレートのデフォルト値は9600で、このサンプルではボーレート9600を使います。
https://developer.mbed.org/teams/Renesas/wiki/GR-PEACH-Getting-Started#install-the-usb-serial-communication
USBHost/TARGET_RENESAS/TARGET_RZ_A1H/src/common/usb0_host_dma.c@27:4206883f4cb7, 2015-01-19 (annotated)
- Committer:
- mbed_official
- Date:
- Mon Jan 19 14:30:37 2015 +0000
- Revision:
- 27:4206883f4cb7
Synchronized with git revision 0ab8d2e6b3d884137dcb5c62d29a07abe132bac7
Full URL: https://github.com/mbedmicro/mbed/commit/0ab8d2e6b3d884137dcb5c62d29a07abe132bac7/
RZ_A1H - Implement some USB functions and fix some bugs about USBHost common codes.
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| mbed_official | 27:4206883f4cb7 | 1 | /******************************************************************************* |
| mbed_official | 27:4206883f4cb7 | 2 | * DISCLAIMER |
| mbed_official | 27:4206883f4cb7 | 3 | * This software is supplied by Renesas Electronics Corporation and is only |
| mbed_official | 27:4206883f4cb7 | 4 | * intended for use with Renesas products. No other uses are authorized. This |
| mbed_official | 27:4206883f4cb7 | 5 | * software is owned by Renesas Electronics Corporation and is protected under |
| mbed_official | 27:4206883f4cb7 | 6 | * all applicable laws, including copyright laws. |
| mbed_official | 27:4206883f4cb7 | 7 | * THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING |
| mbed_official | 27:4206883f4cb7 | 8 | * THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT |
| mbed_official | 27:4206883f4cb7 | 9 | * LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE |
| mbed_official | 27:4206883f4cb7 | 10 | * AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED. |
| mbed_official | 27:4206883f4cb7 | 11 | * TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS |
| mbed_official | 27:4206883f4cb7 | 12 | * ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE |
| mbed_official | 27:4206883f4cb7 | 13 | * FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR |
| mbed_official | 27:4206883f4cb7 | 14 | * ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE |
| mbed_official | 27:4206883f4cb7 | 15 | * BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. |
| mbed_official | 27:4206883f4cb7 | 16 | * Renesas reserves the right, without notice, to make changes to this software |
| mbed_official | 27:4206883f4cb7 | 17 | * and to discontinue the availability of this software. By using this software, |
| mbed_official | 27:4206883f4cb7 | 18 | * you agree to the additional terms and conditions found by accessing the |
| mbed_official | 27:4206883f4cb7 | 19 | * following link: |
| mbed_official | 27:4206883f4cb7 | 20 | * http://www.renesas.com/disclaimer |
| mbed_official | 27:4206883f4cb7 | 21 | * Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved. |
| mbed_official | 27:4206883f4cb7 | 22 | *******************************************************************************/ |
| mbed_official | 27:4206883f4cb7 | 23 | /******************************************************************************* |
| mbed_official | 27:4206883f4cb7 | 24 | * File Name : usb0_host_dma.c |
| mbed_official | 27:4206883f4cb7 | 25 | * $Rev: 1116 $ |
| mbed_official | 27:4206883f4cb7 | 26 | * $Date:: 2014-07-09 16:29:19 +0900#$ |
| mbed_official | 27:4206883f4cb7 | 27 | * Device(s) : RZ/A1H |
| mbed_official | 27:4206883f4cb7 | 28 | * Tool-Chain : |
| mbed_official | 27:4206883f4cb7 | 29 | * OS : None |
| mbed_official | 27:4206883f4cb7 | 30 | * H/W Platform : |
| mbed_official | 27:4206883f4cb7 | 31 | * Description : RZ/A1H R7S72100 USB Sample Program |
| mbed_official | 27:4206883f4cb7 | 32 | * Operation : |
| mbed_official | 27:4206883f4cb7 | 33 | * Limitations : |
| mbed_official | 27:4206883f4cb7 | 34 | *******************************************************************************/ |
| mbed_official | 27:4206883f4cb7 | 35 | |
| mbed_official | 27:4206883f4cb7 | 36 | |
| mbed_official | 27:4206883f4cb7 | 37 | /******************************************************************************* |
| mbed_official | 27:4206883f4cb7 | 38 | Includes <System Includes> , "Project Includes" |
| mbed_official | 27:4206883f4cb7 | 39 | *******************************************************************************/ |
| mbed_official | 27:4206883f4cb7 | 40 | #include "usb0_host.h" |
| mbed_official | 27:4206883f4cb7 | 41 | /* #include "usb0_host_dmacdrv.h" */ |
| mbed_official | 27:4206883f4cb7 | 42 | |
| mbed_official | 27:4206883f4cb7 | 43 | |
| mbed_official | 27:4206883f4cb7 | 44 | /******************************************************************************* |
| mbed_official | 27:4206883f4cb7 | 45 | Typedef definitions |
| mbed_official | 27:4206883f4cb7 | 46 | *******************************************************************************/ |
| mbed_official | 27:4206883f4cb7 | 47 | |
| mbed_official | 27:4206883f4cb7 | 48 | |
| mbed_official | 27:4206883f4cb7 | 49 | /******************************************************************************* |
| mbed_official | 27:4206883f4cb7 | 50 | Macro definitions |
| mbed_official | 27:4206883f4cb7 | 51 | *******************************************************************************/ |
| mbed_official | 27:4206883f4cb7 | 52 | |
| mbed_official | 27:4206883f4cb7 | 53 | |
| mbed_official | 27:4206883f4cb7 | 54 | /******************************************************************************* |
| mbed_official | 27:4206883f4cb7 | 55 | Imported global variables and functions (from other files) |
| mbed_official | 27:4206883f4cb7 | 56 | *******************************************************************************/ |
| mbed_official | 27:4206883f4cb7 | 57 | |
| mbed_official | 27:4206883f4cb7 | 58 | |
| mbed_official | 27:4206883f4cb7 | 59 | /******************************************************************************* |
| mbed_official | 27:4206883f4cb7 | 60 | Exported global variables and functions (to be accessed by other files) |
| mbed_official | 27:4206883f4cb7 | 61 | *******************************************************************************/ |
| mbed_official | 27:4206883f4cb7 | 62 | |
| mbed_official | 27:4206883f4cb7 | 63 | |
| mbed_official | 27:4206883f4cb7 | 64 | /******************************************************************************* |
| mbed_official | 27:4206883f4cb7 | 65 | Private global variables and functions |
| mbed_official | 27:4206883f4cb7 | 66 | *******************************************************************************/ |
| mbed_official | 27:4206883f4cb7 | 67 | static void usb0_host_dmaint(uint16_t fifo); |
| mbed_official | 27:4206883f4cb7 | 68 | static void usb0_host_dmaint_buf2fifo(uint16_t pipe); |
| mbed_official | 27:4206883f4cb7 | 69 | static void usb0_host_dmaint_fifo2buf(uint16_t pipe); |
| mbed_official | 27:4206883f4cb7 | 70 | |
| mbed_official | 27:4206883f4cb7 | 71 | |
| mbed_official | 27:4206883f4cb7 | 72 | /******************************************************************************* |
| mbed_official | 27:4206883f4cb7 | 73 | * Function Name: usb0_host_dma_stop_d0 |
| mbed_official | 27:4206883f4cb7 | 74 | * Description : D0FIFO DMA stop |
| mbed_official | 27:4206883f4cb7 | 75 | * Arguments : uint16_t pipe : pipe number |
| mbed_official | 27:4206883f4cb7 | 76 | * : uint32_t remain : transfer byte |
| mbed_official | 27:4206883f4cb7 | 77 | * Return Value : none |
| mbed_official | 27:4206883f4cb7 | 78 | *******************************************************************************/ |
| mbed_official | 27:4206883f4cb7 | 79 | void usb0_host_dma_stop_d0 (uint16_t pipe, uint32_t remain) |
| mbed_official | 27:4206883f4cb7 | 80 | { |
| mbed_official | 27:4206883f4cb7 | 81 | uint16_t dtln; |
| mbed_official | 27:4206883f4cb7 | 82 | uint16_t dfacc; |
| mbed_official | 27:4206883f4cb7 | 83 | uint16_t buffer; |
| mbed_official | 27:4206883f4cb7 | 84 | uint16_t sds_b = 1; |
| mbed_official | 27:4206883f4cb7 | 85 | |
| mbed_official | 27:4206883f4cb7 | 86 | dfacc = RZA_IO_RegRead_16(&USB200.D0FBCFG, |
| mbed_official | 27:4206883f4cb7 | 87 | USB_DnFBCFG_DFACC_SHIFT, |
| mbed_official | 27:4206883f4cb7 | 88 | USB_DnFBCFG_DFACC); |
| mbed_official | 27:4206883f4cb7 | 89 | if (dfacc == 2) |
| mbed_official | 27:4206883f4cb7 | 90 | { |
| mbed_official | 27:4206883f4cb7 | 91 | sds_b = 32; |
| mbed_official | 27:4206883f4cb7 | 92 | } |
| mbed_official | 27:4206883f4cb7 | 93 | else if (dfacc == 1) |
| mbed_official | 27:4206883f4cb7 | 94 | { |
| mbed_official | 27:4206883f4cb7 | 95 | sds_b = 16; |
| mbed_official | 27:4206883f4cb7 | 96 | } |
| mbed_official | 27:4206883f4cb7 | 97 | else |
| mbed_official | 27:4206883f4cb7 | 98 | { |
| mbed_official | 27:4206883f4cb7 | 99 | if (g_usb0_host_DmaInfo[USB_HOST_D0FIFO].size == 2) |
| mbed_official | 27:4206883f4cb7 | 100 | { |
| mbed_official | 27:4206883f4cb7 | 101 | sds_b = 4; |
| mbed_official | 27:4206883f4cb7 | 102 | } |
| mbed_official | 27:4206883f4cb7 | 103 | else if (g_usb0_host_DmaInfo[USB_HOST_D0FIFO].size == 1) |
| mbed_official | 27:4206883f4cb7 | 104 | { |
| mbed_official | 27:4206883f4cb7 | 105 | sds_b = 2; |
| mbed_official | 27:4206883f4cb7 | 106 | } |
| mbed_official | 27:4206883f4cb7 | 107 | else |
| mbed_official | 27:4206883f4cb7 | 108 | { |
| mbed_official | 27:4206883f4cb7 | 109 | sds_b = 1; |
| mbed_official | 27:4206883f4cb7 | 110 | } |
| mbed_official | 27:4206883f4cb7 | 111 | } |
| mbed_official | 27:4206883f4cb7 | 112 | |
| mbed_official | 27:4206883f4cb7 | 113 | if (RZA_IO_RegRead_16(&g_usb0_host_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 1) |
| mbed_official | 27:4206883f4cb7 | 114 | { |
| mbed_official | 27:4206883f4cb7 | 115 | if (g_usb0_host_pipe_status[pipe] != USB_HOST_PIPE_DONE) |
| mbed_official | 27:4206883f4cb7 | 116 | { |
| mbed_official | 27:4206883f4cb7 | 117 | buffer = USB200.D0FIFOCTR; |
| mbed_official | 27:4206883f4cb7 | 118 | dtln = (buffer & USB_HOST_BITDTLN); |
| mbed_official | 27:4206883f4cb7 | 119 | |
| mbed_official | 27:4206883f4cb7 | 120 | if ((dtln % sds_b) != 0) |
| mbed_official | 27:4206883f4cb7 | 121 | { |
| mbed_official | 27:4206883f4cb7 | 122 | remain += (sds_b - (dtln % sds_b)); |
| mbed_official | 27:4206883f4cb7 | 123 | } |
| mbed_official | 27:4206883f4cb7 | 124 | g_usb0_host_PipeDataSize[pipe] = (g_usb0_host_data_count[pipe] - remain); |
| mbed_official | 27:4206883f4cb7 | 125 | g_usb0_host_data_count[pipe] = remain; |
| mbed_official | 27:4206883f4cb7 | 126 | } |
| mbed_official | 27:4206883f4cb7 | 127 | } |
| mbed_official | 27:4206883f4cb7 | 128 | |
| mbed_official | 27:4206883f4cb7 | 129 | RZA_IO_RegWrite_16(&USB200.D0FIFOSEL, |
| mbed_official | 27:4206883f4cb7 | 130 | 0, |
| mbed_official | 27:4206883f4cb7 | 131 | USB_DnFIFOSEL_DREQE_SHIFT, |
| mbed_official | 27:4206883f4cb7 | 132 | USB_DnFIFOSEL_DREQE); |
| mbed_official | 27:4206883f4cb7 | 133 | } |
| mbed_official | 27:4206883f4cb7 | 134 | |
| mbed_official | 27:4206883f4cb7 | 135 | /******************************************************************************* |
| mbed_official | 27:4206883f4cb7 | 136 | * Function Name: usb0_host_dma_stop_d1 |
| mbed_official | 27:4206883f4cb7 | 137 | * Description : D1FIFO DMA stop |
| mbed_official | 27:4206883f4cb7 | 138 | * Arguments : uint16_t pipe : pipe number |
| mbed_official | 27:4206883f4cb7 | 139 | * : uint32_t remain : transfer byte |
| mbed_official | 27:4206883f4cb7 | 140 | * Return Value : none |
| mbed_official | 27:4206883f4cb7 | 141 | *******************************************************************************/ |
| mbed_official | 27:4206883f4cb7 | 142 | void usb0_host_dma_stop_d1 (uint16_t pipe, uint32_t remain) |
| mbed_official | 27:4206883f4cb7 | 143 | { |
| mbed_official | 27:4206883f4cb7 | 144 | uint16_t dtln; |
| mbed_official | 27:4206883f4cb7 | 145 | uint16_t dfacc; |
| mbed_official | 27:4206883f4cb7 | 146 | uint16_t buffer; |
| mbed_official | 27:4206883f4cb7 | 147 | uint16_t sds_b = 1; |
| mbed_official | 27:4206883f4cb7 | 148 | |
| mbed_official | 27:4206883f4cb7 | 149 | dfacc = RZA_IO_RegRead_16(&USB200.D1FBCFG, |
| mbed_official | 27:4206883f4cb7 | 150 | USB_DnFBCFG_DFACC_SHIFT, |
| mbed_official | 27:4206883f4cb7 | 151 | USB_DnFBCFG_DFACC); |
| mbed_official | 27:4206883f4cb7 | 152 | if (dfacc == 2) |
| mbed_official | 27:4206883f4cb7 | 153 | { |
| mbed_official | 27:4206883f4cb7 | 154 | sds_b = 32; |
| mbed_official | 27:4206883f4cb7 | 155 | } |
| mbed_official | 27:4206883f4cb7 | 156 | else if (dfacc == 1) |
| mbed_official | 27:4206883f4cb7 | 157 | { |
| mbed_official | 27:4206883f4cb7 | 158 | sds_b = 16; |
| mbed_official | 27:4206883f4cb7 | 159 | } |
| mbed_official | 27:4206883f4cb7 | 160 | else |
| mbed_official | 27:4206883f4cb7 | 161 | { |
| mbed_official | 27:4206883f4cb7 | 162 | if (g_usb0_host_DmaInfo[USB_HOST_D1FIFO].size == 2) |
| mbed_official | 27:4206883f4cb7 | 163 | { |
| mbed_official | 27:4206883f4cb7 | 164 | sds_b = 4; |
| mbed_official | 27:4206883f4cb7 | 165 | } |
| mbed_official | 27:4206883f4cb7 | 166 | else if (g_usb0_host_DmaInfo[USB_HOST_D1FIFO].size == 1) |
| mbed_official | 27:4206883f4cb7 | 167 | { |
| mbed_official | 27:4206883f4cb7 | 168 | sds_b = 2; |
| mbed_official | 27:4206883f4cb7 | 169 | } |
| mbed_official | 27:4206883f4cb7 | 170 | else |
| mbed_official | 27:4206883f4cb7 | 171 | { |
| mbed_official | 27:4206883f4cb7 | 172 | sds_b = 1; |
| mbed_official | 27:4206883f4cb7 | 173 | } |
| mbed_official | 27:4206883f4cb7 | 174 | } |
| mbed_official | 27:4206883f4cb7 | 175 | |
| mbed_official | 27:4206883f4cb7 | 176 | if (RZA_IO_RegRead_16(&g_usb0_host_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 1) |
| mbed_official | 27:4206883f4cb7 | 177 | { |
| mbed_official | 27:4206883f4cb7 | 178 | if (g_usb0_host_pipe_status[pipe] != USB_HOST_PIPE_DONE) |
| mbed_official | 27:4206883f4cb7 | 179 | { |
| mbed_official | 27:4206883f4cb7 | 180 | buffer = USB200.D1FIFOCTR; |
| mbed_official | 27:4206883f4cb7 | 181 | dtln = (buffer & USB_HOST_BITDTLN); |
| mbed_official | 27:4206883f4cb7 | 182 | |
| mbed_official | 27:4206883f4cb7 | 183 | if ((dtln % sds_b) != 0) |
| mbed_official | 27:4206883f4cb7 | 184 | { |
| mbed_official | 27:4206883f4cb7 | 185 | remain += (sds_b - (dtln % sds_b)); |
| mbed_official | 27:4206883f4cb7 | 186 | } |
| mbed_official | 27:4206883f4cb7 | 187 | g_usb0_host_PipeDataSize[pipe] = (g_usb0_host_data_count[pipe] - remain); |
| mbed_official | 27:4206883f4cb7 | 188 | g_usb0_host_data_count[pipe] = remain; |
| mbed_official | 27:4206883f4cb7 | 189 | } |
| mbed_official | 27:4206883f4cb7 | 190 | } |
| mbed_official | 27:4206883f4cb7 | 191 | |
| mbed_official | 27:4206883f4cb7 | 192 | RZA_IO_RegWrite_16(&USB200.D1FIFOSEL, |
| mbed_official | 27:4206883f4cb7 | 193 | 0, |
| mbed_official | 27:4206883f4cb7 | 194 | USB_DnFIFOSEL_DREQE_SHIFT, |
| mbed_official | 27:4206883f4cb7 | 195 | USB_DnFIFOSEL_DREQE); |
| mbed_official | 27:4206883f4cb7 | 196 | } |
| mbed_official | 27:4206883f4cb7 | 197 | |
| mbed_official | 27:4206883f4cb7 | 198 | /******************************************************************************* |
| mbed_official | 27:4206883f4cb7 | 199 | * Function Name: usb0_host_dma_interrupt_d0fifo |
| mbed_official | 27:4206883f4cb7 | 200 | * Description : This function is DMA interrupt handler entry. |
| mbed_official | 27:4206883f4cb7 | 201 | * : Execute usb1_host_dmaint() after disabling DMA interrupt in this function. |
| mbed_official | 27:4206883f4cb7 | 202 | * : Disable DMA interrupt to DMAC executed when USB_HOST_D0FIFO_DMA is |
| mbed_official | 27:4206883f4cb7 | 203 | * : specified by dma->fifo. |
| mbed_official | 27:4206883f4cb7 | 204 | * : Register this function as DMA complete interrupt. |
| mbed_official | 27:4206883f4cb7 | 205 | * Arguments : uint32_t int_sense ; Interrupts detection mode |
| mbed_official | 27:4206883f4cb7 | 206 | * : ; INTC_LEVEL_SENSITIVE : Level sense |
| mbed_official | 27:4206883f4cb7 | 207 | * : ; INTC_EDGE_TRIGGER : Edge trigger |
| mbed_official | 27:4206883f4cb7 | 208 | * Return Value : none |
| mbed_official | 27:4206883f4cb7 | 209 | *******************************************************************************/ |
| mbed_official | 27:4206883f4cb7 | 210 | void usb0_host_dma_interrupt_d0fifo (uint32_t int_sense) |
| mbed_official | 27:4206883f4cb7 | 211 | { |
| mbed_official | 27:4206883f4cb7 | 212 | usb0_host_dmaint(USB_HOST_D0FIFO); |
| mbed_official | 27:4206883f4cb7 | 213 | g_usb0_host_DmaStatus[USB_HOST_D0FIFO] = USB_HOST_DMA_READY; |
| mbed_official | 27:4206883f4cb7 | 214 | } |
| mbed_official | 27:4206883f4cb7 | 215 | |
| mbed_official | 27:4206883f4cb7 | 216 | /******************************************************************************* |
| mbed_official | 27:4206883f4cb7 | 217 | * Function Name: usb0_host_dma_interrupt_d1fifo |
| mbed_official | 27:4206883f4cb7 | 218 | * Description : This function is DMA interrupt handler entry. |
| mbed_official | 27:4206883f4cb7 | 219 | * : Execute usb0_host_dmaint() after disabling DMA interrupt in this function. |
| mbed_official | 27:4206883f4cb7 | 220 | * : Disable DMA interrupt to DMAC executed when USB_HOST_D1FIFO_DMA is |
| mbed_official | 27:4206883f4cb7 | 221 | * : specified by dma->fifo. |
| mbed_official | 27:4206883f4cb7 | 222 | * : Register this function as DMA complete interrupt. |
| mbed_official | 27:4206883f4cb7 | 223 | * Arguments : uint32_t int_sense ; Interrupts detection mode |
| mbed_official | 27:4206883f4cb7 | 224 | * : ; INTC_LEVEL_SENSITIVE : Level sense |
| mbed_official | 27:4206883f4cb7 | 225 | * : ; INTC_EDGE_TRIGGER : Edge trigger |
| mbed_official | 27:4206883f4cb7 | 226 | * Return Value : none |
| mbed_official | 27:4206883f4cb7 | 227 | *******************************************************************************/ |
| mbed_official | 27:4206883f4cb7 | 228 | void usb0_host_dma_interrupt_d1fifo (uint32_t int_sense) |
| mbed_official | 27:4206883f4cb7 | 229 | { |
| mbed_official | 27:4206883f4cb7 | 230 | usb0_host_dmaint(USB_HOST_D1FIFO); |
| mbed_official | 27:4206883f4cb7 | 231 | g_usb0_host_DmaStatus[USB_HOST_D1FIFO] = USB_HOST_DMA_READY; |
| mbed_official | 27:4206883f4cb7 | 232 | } |
| mbed_official | 27:4206883f4cb7 | 233 | |
| mbed_official | 27:4206883f4cb7 | 234 | /******************************************************************************* |
| mbed_official | 27:4206883f4cb7 | 235 | * Function Name: usb0_host_dmaint |
| mbed_official | 27:4206883f4cb7 | 236 | * Description : This function is DMA transfer end interrupt |
| mbed_official | 27:4206883f4cb7 | 237 | * Arguments : uint16_t fifo ; fifo number |
| mbed_official | 27:4206883f4cb7 | 238 | * : ; USB_HOST_D0FIFO |
| mbed_official | 27:4206883f4cb7 | 239 | * : ; USB_HOST_D1FIFO |
| mbed_official | 27:4206883f4cb7 | 240 | * Return Value : none |
| mbed_official | 27:4206883f4cb7 | 241 | *******************************************************************************/ |
| mbed_official | 27:4206883f4cb7 | 242 | static void usb0_host_dmaint (uint16_t fifo) |
| mbed_official | 27:4206883f4cb7 | 243 | { |
| mbed_official | 27:4206883f4cb7 | 244 | uint16_t pipe; |
| mbed_official | 27:4206883f4cb7 | 245 | |
| mbed_official | 27:4206883f4cb7 | 246 | pipe = g_usb0_host_DmaPipe[fifo]; |
| mbed_official | 27:4206883f4cb7 | 247 | |
| mbed_official | 27:4206883f4cb7 | 248 | if (g_usb0_host_DmaInfo[fifo].dir == USB_HOST_BUF2FIFO) |
| mbed_official | 27:4206883f4cb7 | 249 | { |
| mbed_official | 27:4206883f4cb7 | 250 | usb0_host_dmaint_buf2fifo(pipe); |
| mbed_official | 27:4206883f4cb7 | 251 | } |
| mbed_official | 27:4206883f4cb7 | 252 | else |
| mbed_official | 27:4206883f4cb7 | 253 | { |
| mbed_official | 27:4206883f4cb7 | 254 | usb0_host_dmaint_fifo2buf(pipe); |
| mbed_official | 27:4206883f4cb7 | 255 | } |
| mbed_official | 27:4206883f4cb7 | 256 | } |
| mbed_official | 27:4206883f4cb7 | 257 | |
| mbed_official | 27:4206883f4cb7 | 258 | /******************************************************************************* |
| mbed_official | 27:4206883f4cb7 | 259 | * Function Name: usb0_host_dmaint_fifo2buf |
| mbed_official | 27:4206883f4cb7 | 260 | * Description : Executes read completion from FIFO by DMAC. |
| mbed_official | 27:4206883f4cb7 | 261 | * Arguments : uint16_t pipe : pipe number |
| mbed_official | 27:4206883f4cb7 | 262 | * Return Value : none |
| mbed_official | 27:4206883f4cb7 | 263 | *******************************************************************************/ |
| mbed_official | 27:4206883f4cb7 | 264 | static void usb0_host_dmaint_fifo2buf (uint16_t pipe) |
| mbed_official | 27:4206883f4cb7 | 265 | { |
| mbed_official | 27:4206883f4cb7 | 266 | uint32_t remain; |
| mbed_official | 27:4206883f4cb7 | 267 | uint16_t useport; |
| mbed_official | 27:4206883f4cb7 | 268 | |
| mbed_official | 27:4206883f4cb7 | 269 | if (g_usb0_host_pipe_status[pipe] != USB_HOST_PIPE_DONE) |
| mbed_official | 27:4206883f4cb7 | 270 | { |
| mbed_official | 27:4206883f4cb7 | 271 | useport = (uint16_t)(g_usb0_host_PipeTbl[pipe] & USB_HOST_FIFO_USE); |
| mbed_official | 27:4206883f4cb7 | 272 | |
| mbed_official | 27:4206883f4cb7 | 273 | if (useport == USB_HOST_D0FIFO_DMA) |
| mbed_official | 27:4206883f4cb7 | 274 | { |
| mbed_official | 27:4206883f4cb7 | 275 | remain = Userdef_USB_usb0_host_stop_dma0(); |
| mbed_official | 27:4206883f4cb7 | 276 | usb0_host_dma_stop_d0(pipe, remain); |
| mbed_official | 27:4206883f4cb7 | 277 | |
| mbed_official | 27:4206883f4cb7 | 278 | if (RZA_IO_RegRead_16(&g_usb0_host_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 0) |
| mbed_official | 27:4206883f4cb7 | 279 | { |
| mbed_official | 27:4206883f4cb7 | 280 | if (g_usb0_host_DmaStatus[USB_HOST_D0FIFO] == USB_HOST_DMA_BUSYEND) |
| mbed_official | 27:4206883f4cb7 | 281 | { |
| mbed_official | 27:4206883f4cb7 | 282 | USB200.D0FIFOCTR = USB_HOST_BITBCLR; |
| mbed_official | 27:4206883f4cb7 | 283 | g_usb0_host_pipe_status[pipe] = USB_HOST_PIPE_DONE; |
| mbed_official | 27:4206883f4cb7 | 284 | } |
| mbed_official | 27:4206883f4cb7 | 285 | else |
| mbed_official | 27:4206883f4cb7 | 286 | { |
| mbed_official | 27:4206883f4cb7 | 287 | usb0_host_enable_brdy_int(pipe); |
| mbed_official | 27:4206883f4cb7 | 288 | } |
| mbed_official | 27:4206883f4cb7 | 289 | } |
| mbed_official | 27:4206883f4cb7 | 290 | } |
| mbed_official | 27:4206883f4cb7 | 291 | else |
| mbed_official | 27:4206883f4cb7 | 292 | { |
| mbed_official | 27:4206883f4cb7 | 293 | remain = Userdef_USB_usb0_host_stop_dma1(); |
| mbed_official | 27:4206883f4cb7 | 294 | usb0_host_dma_stop_d1(pipe, remain); |
| mbed_official | 27:4206883f4cb7 | 295 | |
| mbed_official | 27:4206883f4cb7 | 296 | if (RZA_IO_RegRead_16(&g_usb0_host_pipecfg[pipe], USB_PIPECFG_BFRE_SHIFT, USB_PIPECFG_BFRE) == 0) |
| mbed_official | 27:4206883f4cb7 | 297 | { |
| mbed_official | 27:4206883f4cb7 | 298 | if (g_usb0_host_DmaStatus[USB_HOST_D1FIFO] == USB_HOST_DMA_BUSYEND) |
| mbed_official | 27:4206883f4cb7 | 299 | { |
| mbed_official | 27:4206883f4cb7 | 300 | USB200.D1FIFOCTR = USB_HOST_BITBCLR; |
| mbed_official | 27:4206883f4cb7 | 301 | g_usb0_host_pipe_status[pipe] = USB_HOST_PIPE_DONE; |
| mbed_official | 27:4206883f4cb7 | 302 | } |
| mbed_official | 27:4206883f4cb7 | 303 | else |
| mbed_official | 27:4206883f4cb7 | 304 | { |
| mbed_official | 27:4206883f4cb7 | 305 | usb0_host_enable_brdy_int(pipe); |
| mbed_official | 27:4206883f4cb7 | 306 | } |
| mbed_official | 27:4206883f4cb7 | 307 | } |
| mbed_official | 27:4206883f4cb7 | 308 | } |
| mbed_official | 27:4206883f4cb7 | 309 | } |
| mbed_official | 27:4206883f4cb7 | 310 | } |
| mbed_official | 27:4206883f4cb7 | 311 | |
| mbed_official | 27:4206883f4cb7 | 312 | /******************************************************************************* |
| mbed_official | 27:4206883f4cb7 | 313 | * Function Name: usb0_host_dmaint_buf2fifo |
| mbed_official | 27:4206883f4cb7 | 314 | * Description : Executes write completion in FIFO by DMAC. |
| mbed_official | 27:4206883f4cb7 | 315 | * Arguments : uint16_t pipe : pipe number |
| mbed_official | 27:4206883f4cb7 | 316 | * Return Value : none |
| mbed_official | 27:4206883f4cb7 | 317 | *******************************************************************************/ |
| mbed_official | 27:4206883f4cb7 | 318 | static void usb0_host_dmaint_buf2fifo (uint16_t pipe) |
| mbed_official | 27:4206883f4cb7 | 319 | { |
| mbed_official | 27:4206883f4cb7 | 320 | uint16_t useport; |
| mbed_official | 27:4206883f4cb7 | 321 | uint32_t remain; |
| mbed_official | 27:4206883f4cb7 | 322 | |
| mbed_official | 27:4206883f4cb7 | 323 | useport = (uint16_t)(g_usb0_host_PipeTbl[pipe] & USB_HOST_FIFO_USE); |
| mbed_official | 27:4206883f4cb7 | 324 | |
| mbed_official | 27:4206883f4cb7 | 325 | if (useport == USB_HOST_D0FIFO_DMA) |
| mbed_official | 27:4206883f4cb7 | 326 | { |
| mbed_official | 27:4206883f4cb7 | 327 | remain = Userdef_USB_usb0_host_stop_dma0(); |
| mbed_official | 27:4206883f4cb7 | 328 | usb0_host_dma_stop_d0(pipe, remain); |
| mbed_official | 27:4206883f4cb7 | 329 | |
| mbed_official | 27:4206883f4cb7 | 330 | if (g_usb0_host_DmaBval[USB_HOST_D0FIFO] != 0) |
| mbed_official | 27:4206883f4cb7 | 331 | { |
| mbed_official | 27:4206883f4cb7 | 332 | RZA_IO_RegWrite_16(&USB200.D0FIFOCTR, |
| mbed_official | 27:4206883f4cb7 | 333 | 1, |
| mbed_official | 27:4206883f4cb7 | 334 | USB_DnFIFOCTR_BVAL_SHIFT, |
| mbed_official | 27:4206883f4cb7 | 335 | USB_DnFIFOCTR_BVAL); |
| mbed_official | 27:4206883f4cb7 | 336 | } |
| mbed_official | 27:4206883f4cb7 | 337 | } |
| mbed_official | 27:4206883f4cb7 | 338 | else |
| mbed_official | 27:4206883f4cb7 | 339 | { |
| mbed_official | 27:4206883f4cb7 | 340 | remain = Userdef_USB_usb0_host_stop_dma1(); |
| mbed_official | 27:4206883f4cb7 | 341 | usb0_host_dma_stop_d1(pipe, remain); |
| mbed_official | 27:4206883f4cb7 | 342 | |
| mbed_official | 27:4206883f4cb7 | 343 | if (g_usb0_host_DmaBval[USB_HOST_D1FIFO] != 0) |
| mbed_official | 27:4206883f4cb7 | 344 | { |
| mbed_official | 27:4206883f4cb7 | 345 | RZA_IO_RegWrite_16(&USB200.D1FIFOCTR, |
| mbed_official | 27:4206883f4cb7 | 346 | 1, |
| mbed_official | 27:4206883f4cb7 | 347 | USB_DnFIFOCTR_BVAL_SHIFT, |
| mbed_official | 27:4206883f4cb7 | 348 | USB_DnFIFOCTR_BVAL); |
| mbed_official | 27:4206883f4cb7 | 349 | } |
| mbed_official | 27:4206883f4cb7 | 350 | } |
| mbed_official | 27:4206883f4cb7 | 351 | |
| mbed_official | 27:4206883f4cb7 | 352 | usb0_host_enable_bemp_int(pipe); |
| mbed_official | 27:4206883f4cb7 | 353 | } |
| mbed_official | 27:4206883f4cb7 | 354 | |
| mbed_official | 27:4206883f4cb7 | 355 | /* End of File */ |
