Video library for GR-PEACH

Dependents:   Trace_Program2 GR-PEACH_Camera_in_barcode GR-PEACH_LCD_sample GR-PEACH_LCD_4_3inch_sample ... more

Video library for GR-PEACH.

Hello World!

Import programGR-PEACH_Camera_in

Camera in sample for GR-PEACH. This sample works on GR-LYCHEE besides GR-PEACH.

API

Import library

Data Structures

struct lcd_config_t
LCD configuration. More...
struct rect_t
The relative position within the graphics display area. More...
struct video_ext_in_config_t
Digital Video Input configuration. More...

Public Types

enum video_input_channel_t { VIDEO_INPUT_CHANNEL_0 = 0, VIDEO_INPUT_CHANNEL_1 }

Video input channel select.

More...
enum graphics_layer_t { GRAPHICS_LAYER_0 = 0, GRAPHICS_LAYER_1 , GRAPHICS_LAYER_2 , GRAPHICS_LAYER_3 }

Graphics layer select.

More...
enum graphics_error_t {
GRAPHICS_OK = 0, GRAPHICS_VDC5_ERR = -1, GRAPHICS_FORMA_ERR = -2, GRAPHICS_LAYER_ERR = -3,
GRAPHICS_CHANNLE_ERR = -4, GRAPHICS_VIDEO_NTSC_SIZE_ERR = -5, GRAPHICS_VIDEO_PAL_SIZE_ERR = -6, GRAPHICS_PARAM_RANGE_ERR = -7
}

Error codes.

More...
enum graphics_format_t { GRAPHICS_FORMAT_YCBCR422 = 0, GRAPHICS_FORMAT_RGB565 , GRAPHICS_FORMAT_RGB888 , GRAPHICS_FORMAT_ARGB8888 }

Graphics layer read format selects.

More...
enum video_format_t { VIDEO_FORMAT_YCBCR422 = 0, VIDEO_FORMAT_RGB565 , VIDEO_FORMAT_RGB888 }

Video writing format selects.

More...
enum wr_rd_swa_t {
WR_RD_WRSWA_NON = 0, WR_RD_WRSWA_8BIT , WR_RD_WRSWA_16BIT , WR_RD_WRSWA_16_8BIT ,
WR_RD_WRSWA_32BIT , WR_RD_WRSWA_32_8BIT , WR_RD_WRSWA_32_16BIT , WR_RD_WRSWA_32_16_8BIT
}

Frame buffer swap setting.

More...
enum lcd_tcon_pin_t { LCD_TCON_PIN_NON = -1, LCD_TCON_PIN_0 , LCD_TCON_PIN_1 , LCD_TCON_PIN_2 }

LCD tcon output pin selects.

More...
enum lcd_outformat_t { LCD_OUTFORMAT_RGB888 = 0, LCD_OUTFORMAT_RGB666 , LCD_OUTFORMAT_RGB565 }

LCD output format selects.

More...
enum edge_t { EDGE_RISING = 0, EDGE_FALLING = 1 }

Edge of a signal.

More...
enum lcd_type_t { LCD_TYPE_LVDS = 0, LCD_TYPE_PARALLEL_RGB }

LCD type.

More...
enum sig_pol_t { SIG_POL_NOT_INVERTED = 0, SIG_POL_INVERTED }

Polarity of a signal.

More...
enum int_type_t {
INT_TYPE_S0_VI_VSYNC = 0, INT_TYPE_S0_LO_VSYNC , INT_TYPE_S0_VSYNCERR , INT_TYPE_VLINE ,
INT_TYPE_S0_VFIELD , INT_TYPE_IV1_VBUFERR , INT_TYPE_IV3_VBUFERR , INT_TYPE_IV5_VBUFERR ,
INT_TYPE_IV6_VBUFERR , INT_TYPE_S0_WLINE , INT_TYPE_S1_VI_VSYNC , INT_TYPE_S1_LO_VSYNC ,
INT_TYPE_S1_VSYNCERR , INT_TYPE_S1_VFIELD , INT_TYPE_IV2_VBUFERR , INT_TYPE_IV4_VBUFERR ,
INT_TYPE_S1_WLINE , INT_TYPE_OIR_VI_VSYNC , INT_TYPE_OIR_LO_VSYNC , INT_TYPE_OIR_VLINE ,
INT_TYPE_OIR_VFIELD , INT_TYPE_IV7_VBUFERR , INT_TYPE_IV8_VBUFERR , INT_TYPE_NUM
}

Interrupt type.

More...
enum graphics_video_col_sys_t {
COL_SYS_NTSC_358 = 0, COL_SYS_NTSC_443 = 1, COL_SYS_PAL_443 = 2, COL_SYS_PAL_M = 3,
COL_SYS_PAL_N = 4, COL_SYS_SECAM = 5, COL_SYS_NTSC_443_60 = 6, COL_SYS_PAL_60 = 7
}

Video color system.

More...
enum video_input_sel_t { INPUT_SEL_VDEC = 0, INPUT_SEL_EXT = 1 }

External Input select.

More...
enum video_extin_format_t {
VIDEO_EXTIN_FORMAT_RGB888 = 0, VIDEO_EXTIN_FORMAT_RGB666 , VIDEO_EXTIN_FORMAT_RGB565 , VIDEO_EXTIN_FORMAT_BT656 ,
VIDEO_EXTIN_FORMAT_BT601 , VIDEO_EXTIN_FORMAT_YCBCR422 , VIDEO_EXTIN_FORMAT_YCBCR444
}

External input format select.

More...
enum onoff_t { OFF = 0, ON = 1 }

On/off.

More...
enum extin_input_line_t { EXTIN_LINE_525 = 0, EXTIN_LINE_625 = 1 }

Number of lines for BT.656 external input.

More...
enum extin_h_pos_t { EXTIN_H_POS_CBYCRY = 0, EXTIN_H_POS_YCRYCB , EXTIN_H_POS_CRYCBY , EXTIN_H_POS_YCBYCR }

Y/Cb/Y/Cr data string start timing.

More...

Public Member Functions

DisplayBase (void)
Constructor method of display base object.
graphics_error_t Graphics_init ( lcd_config_t *lcd_config)
Graphics initialization processing
If not using display, set NULL in parameter.
graphics_error_t Graphics_Video_init ( video_input_sel_t video_input_sel, video_ext_in_config_t *video_ext_in_config)
Graphics Video initialization processing
If setting INPUT_SEL_VDEC in video_input_sel parameter, set NULL in video_ext_in_config parameter.
graphics_error_t Graphics_Lcd_Port_Init (PinName *pin, unsigned int pin_count)
LCD output port initialization processing.
graphics_error_t Graphics_Lvds_Port_Init (PinName *pin, unsigned int pin_count)
LVDS output port initialization processing.
graphics_error_t Graphics_Dvinput_Port_Init (PinName *pin, unsigned int pin_count)
Digital video input port initialization processing.
graphics_error_t Graphics_Irq_Handler_Set ( int_type_t Graphics_Irq_Handler_Set, unsigned short num, void(*callback)( int_type_t ))
Interrupt callback setup This function performs the following processing:

  • Enables the interrupt when the pointer to the corresponding interrupt callback function is specified.

graphics_error_t Graphics_Start ( graphics_layer_t layer_id)
Start the graphics surface read process.
graphics_error_t Graphics_Stop ( graphics_layer_t layer_id)
Stop the graphics surface read process.
graphics_error_t Video_Start ( video_input_channel_t video_input_channel)
Start the video surface write process.
graphics_error_t Video_Stop ( video_input_channel_t video_input_channel)
Stop the video surface write process.
graphics_error_t Graphics_Read_Setting ( graphics_layer_t layer_id, void *framebuff, unsigned int fb_stride, graphics_format_t gr_format, wr_rd_swa_t wr_rd_swa, rect_t *gr_rect)
Graphics surface read process setting.
graphics_error_t Graphics_Read_Change ( graphics_layer_t layer_id, void *framebuff)
Graphics surface read buffer change process.
graphics_error_t Video_Write_Setting ( video_input_channel_t video_input_channel, graphics_video_col_sys_t col_sys, void *framebuff, unsigned int fb_stride, video_format_t video_format, wr_rd_swa_t wr_rd_swa, unsigned short video_write_buff_vw, unsigned short video_write_buff_hw)
Video surface write process setting.
graphics_error_t Video_Write_Change ( video_input_channel_t video_input_channel, void *framebuff, uint32_t fb_stride)
Video surface write buffer change process.

Interface

See the Pinout page for more details

DisplayBase.cpp

Committer:
dkato
Date:
2016-06-30
Revision:
4:aeefe5171463
Parent:
2:3149baf7925b

File content as of revision 4:aeefe5171463:

/*******************************************************************************
* DISCLAIMER
* This software is supplied by Renesas Electronics Corporation and is only
* intended for use with Renesas products. No other uses are authorized. This
* software is owned by Renesas Electronics Corporation and is protected under
* all applicable laws, including copyright laws.
* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
* Renesas reserves the right, without notice, to make changes to this software
* and to discontinue the availability of this software. By using this software,
* you agree to the additional terms and conditions found by accessing the
* following link:
* http://www.renesas.com/disclaimer
* Copyright (C) 2012 - 2015 Renesas Electronics Corporation. All rights reserved.
*******************************************************************************/
#include <string.h>
#include "DisplayBace.h"
#include "gr_peach_vdc5.h"

/**************************************************************************//**
 * @brief       Constructor of the DisplayBase class
 * @param[in]   None
 * @retval      None
******************************************************************************/
DisplayBase::DisplayBase( void )
{
    /* Lcd setting (default) */
    _lcd_config.lcd_type             = LCD_TYPE_PARALLEL_RGB;       /* LVDS or Pararel RGB                      */
    _lcd_config.intputClock          = 66.67f;                      /* P1  clk [MHz] ex. 66.67                  */
    _lcd_config.outputClock          = 40.00f;                      /* LCD clk [MHz] ex. 33.33                  */

    _lcd_config.lcd_outformat        = LCD_OUTFORMAT_RGB888;        /* Output format select */
    _lcd_config.lcd_edge             = EDGE_FALLING;                /* Output phase control of LCD_DATA23 to LCD_DATA0 pin */

    _lcd_config.h_toatal_period      = (800u + 40u + 128u+ 88u);    /* Free-running Hsync period                */
    _lcd_config.v_toatal_period      = (600u + 1u + 4u + 23u);      /* Free-running Vsync period                */
    _lcd_config.h_disp_widht         = 800u;                        /* LCD display area size, horizontal width  */
    _lcd_config.v_disp_widht         = 600u;                        /* LCD display area size, vertical width    */
    _lcd_config.h_back_porch         = (128u+ 88u);                 /* LCD display horizontal back porch period */
    _lcd_config.v_back_porch         = (4u + 23u);                  /* LCD display vertical back porch period   */

    _lcd_config.h_sync_port          = LCD_TCON_PIN_0;              /* TCONn or Not use(-1)                     */
    _lcd_config.h_sync_port_polarity = SIG_POL_NOT_INVERTED;        /* Polarity inversion control of signal     */
    _lcd_config.h_sync_width         = 128u;                        /* Hsync width                              */

    _lcd_config.v_sync_port          = LCD_TCON_PIN_1;              /* TCONn or Not use(-1)                     */
    _lcd_config.v_sync_port_polarity = SIG_POL_NOT_INVERTED;        /* Polarity inversion control of signal     */
    _lcd_config.v_sync_width         = 4u;                          /* Vsync width                              */

    _lcd_config.de_port              = LCD_TCON_PIN_NON;            /* TCONn or Not use(-1)                     */
    _lcd_config.de_port_polarity     = SIG_POL_NOT_INVERTED;        /* Polarity inversion control of signal     */

    /* Digital video input setting (default) */
    _video_input_sel                    = INPUT_SEL_VDEC;           /* Video decoder output signals */
    _video_ext_in_config.inp_format     = VIDEO_EXTIN_FORMAT_BT601;
    _video_ext_in_config.inp_pxd_edge   = EDGE_RISING;              /* Clock edge select for capturing data          */
    _video_ext_in_config.inp_vs_edge    = EDGE_RISING;              /* Clock edge select for capturing Vsync signals */
    _video_ext_in_config.inp_hs_edge    = EDGE_RISING;              /* Clock edge select for capturing Hsync signals */
    _video_ext_in_config.inp_endian_on  = OFF;                      /* External input bit endian change on/off       */
    _video_ext_in_config.inp_swap_on    = OFF;                      /* External input B/R signal swap on/off         */
    _video_ext_in_config.inp_vs_inv     = SIG_POL_NOT_INVERTED;     /* External input DV_VSYNC inversion control     */
    _video_ext_in_config.inp_hs_inv     = SIG_POL_INVERTED;         /* External input DV_HSYNC inversion control     */
    _video_ext_in_config.inp_f525_625   = EXTIN_LINE_525;           /* Number of lines for BT.656 external input     */
    _video_ext_in_config.inp_h_pos      = EXTIN_H_POS_CRYCBY;       /* Y/Cb/Y/Cr data string start timing to Hsync reference */
    _video_ext_in_config.cap_vs_pos     = 6u;                       /* Capture start position from Vsync             */
    _video_ext_in_config.cap_hs_pos     = 302u;                     /* Capture start position form Hsync             */
    _video_ext_in_config.cap_width      = 640u;                     /* Capture width                                 */
    _video_ext_in_config.cap_height     = 468u;                     /* Capture height should be a multiple of 4      */
} /* End of constructor method () */

/**************************************************************************//**
 * @brief       Graphics initialization processing
 * @param[in]   lcd_config                : LCD configuration
 * @retval      error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Graphics_init( lcd_config_t * lcd_config )
{
    if( lcd_config != NULL ) {
        _lcd_config.lcd_type             = lcd_config->lcd_type;            /* LVDS or Pararel RGB                      */
        _lcd_config.intputClock          = lcd_config->intputClock;         /* P1  clk [MHz] ex. 66.67                  */
        _lcd_config.outputClock          = lcd_config->outputClock;         /* LCD clk [MHz] ex. 33.33                  */

        _lcd_config.lcd_outformat        = lcd_config->lcd_outformat;       /* Output format select */
        _lcd_config.lcd_edge             = lcd_config->lcd_edge;            /* Output phase control of LCD_DATA23 to LCD_DATA0 pin */

        _lcd_config.h_toatal_period      = lcd_config->h_toatal_period;     /* Free-running Hsync period                */
        _lcd_config.v_toatal_period      = lcd_config->v_toatal_period;     /* Free-running Vsync period                */
        _lcd_config.h_disp_widht         = lcd_config->h_disp_widht;        /* LCD display area size, horizontal width  */
        _lcd_config.v_disp_widht         = lcd_config->v_disp_widht;        /* LCD display area size, vertical width    */
        _lcd_config.h_back_porch         = lcd_config->h_back_porch;        /* LCD display horizontal back porch period */
        _lcd_config.v_back_porch         = lcd_config->v_back_porch;        /* LCD display vertical back porch period   */

        _lcd_config.h_sync_port          = lcd_config->h_sync_port;         /* TCONn or Not use(-1)                     */
        _lcd_config.h_sync_port_polarity = lcd_config->h_sync_port_polarity;/* Polarity inversion control of signal     */
        _lcd_config.h_sync_width         = lcd_config->h_sync_width;        /* Hsync width                              */

        _lcd_config.v_sync_port          = lcd_config->v_sync_port;         /* TCONn or Not use(-1)                     */
        _lcd_config.v_sync_port_polarity = lcd_config->v_sync_port_polarity;/* Polarity inversion control of signal     */
        _lcd_config.v_sync_width         = lcd_config->v_sync_width;        /* Vsync width  */

        _lcd_config.de_port              = lcd_config->de_port;             /* TCONn or Not use(-1)                     */
        _lcd_config.de_port_polarity     = lcd_config->de_port_polarity;    /* Polarity inversion control of signal     */
    }

    return (graphics_error_t)DRV_Graphics_Init( (drv_lcd_config_t *)&_lcd_config );
} /* End of method Graphics_init() */

/**************************************************************************//**
 * @brief       Graphics Video initialization processing
 * @param[in]   video_input_sel                : Input select
 * @param[in]   video_ext_in_config            : Digtal video input configuration
 * @retval      error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Graphics_Video_init( video_input_sel_t video_input_sel, video_ext_in_config_t * video_ext_in_config )
{
    graphics_error_t error = GRAPHICS_OK;

    if( _video_input_sel == INPUT_SEL_VDEC || _video_input_sel == INPUT_SEL_EXT ) {
        _video_input_sel = video_input_sel;
    } else {
        error = GRAPHICS_PARAM_RANGE_ERR;
    }

    if( error == GRAPHICS_OK ) {
        if( video_ext_in_config != NULL ) {
            /* Signals supplied via the external input pins        */
            /* if using Video decoder output signals, not using value. */
            _video_ext_in_config.inp_format    = video_ext_in_config->inp_format;
            _video_ext_in_config.inp_pxd_edge  = video_ext_in_config->inp_pxd_edge;
            _video_ext_in_config.inp_vs_edge   = video_ext_in_config->inp_vs_edge;
            _video_ext_in_config.inp_hs_edge   = video_ext_in_config->inp_hs_edge;
            _video_ext_in_config.inp_endian_on = video_ext_in_config->inp_endian_on;
            _video_ext_in_config.inp_swap_on   = video_ext_in_config->inp_swap_on;
            _video_ext_in_config.inp_vs_inv    = video_ext_in_config->inp_vs_inv;
            _video_ext_in_config.inp_hs_inv    = video_ext_in_config->inp_hs_inv;
            _video_ext_in_config.inp_f525_625  = video_ext_in_config->inp_f525_625;
            _video_ext_in_config.inp_h_pos     = video_ext_in_config->inp_h_pos;
            _video_ext_in_config.cap_vs_pos    = video_ext_in_config->cap_vs_pos;
            _video_ext_in_config.cap_hs_pos    = video_ext_in_config->cap_hs_pos;
            _video_ext_in_config.cap_width     = video_ext_in_config->cap_width;
            _video_ext_in_config.cap_height    = video_ext_in_config->cap_height;
        }
    }
    return (graphics_error_t)DRV_Graphics_Video_init( (drv_video_input_sel_t)video_input_sel,
            (drv_video_ext_in_config_t *)&_video_ext_in_config );
} /* End of method Graphics_Video_init() */

/**************************************************************************//**
 * @brief       LCD I/O initialization processing
 * @param[in]   pin                       : Pointer of the pin assignment
 * @param[in]   pin_count                 : Total number of the pin assignment
 * @retval      error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Graphics_Lcd_Port_Init( PinName *pin, unsigned int pin_count )
{
    return (graphics_error_t)DRV_Graphics_Lcd_Port_Init( pin, pin_count );
} /* End of method Graphics_Lcd_Port_Init() */

/**************************************************************************//**
 * @brief       LVDS I/O port initialization processing
 * @param[in]   pin                       : Pointer of the pin assignment
 * @param[in]   pin_count                 : Total number of the pin assignment
 * @retval      error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Graphics_Lvds_Port_Init( PinName *pin, unsigned int pin_count )
{
    return (graphics_error_t)DRV_Graphics_Lvds_Port_Init( pin, pin_count );
} /* End of method Graphics_Lvds_Port_Init() */

/**************************************************************************//**
 * @brief       Digital video input I/O port initialization processing
 * @param[in]   pin                       : Pointer of the pin assignment
 * @param[in]   pin_count                 : Total number of the pin assignment
 * @retval      error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Graphics_Dvinput_Port_Init( PinName *pin, unsigned int pin_count )
{
    return (graphics_error_t)DRV_Graphics_Dvinput_Port_Init( pin, pin_count );
} /* End of method Graphics_Dvinput_Port_Init() */

/**************************************************************************//**
 * @brief       IRQ interrupt handler setting
 * @param[in]   irq                       : VDC5 interrupt type
 * @param[in]   num                       : Interrupt line number
 * @param[in]   * callback                : Interrupt callback function pointer
 * @retval      error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Graphics_Irq_Handler_Set( int_type_t irq, unsigned short num, void (* callback)(int_type_t)  )
{
    return (graphics_error_t)DRV_Graphics_Irq_Handler_Set( (vdc5_int_type_t)irq, num, (void (*)(vdc5_int_type_t))callback );
} /* End of method Graphics_Irq_Handler_Set() */

/**************************************************************************//**
 * @brief       Graphics surface read start processing
 * @param[in]   layer_id                  : Graphics layer ID
 * @retval      error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Graphics_Start( graphics_layer_t layer_id )
{
    return (graphics_error_t)DRV_Graphics_Start( (drv_graphics_layer_t)layer_id );
} /* End of method Graphics_Start() */

/**************************************************************************//**
 * @brief       Graphics surface read stop processing
 * @param[in]   layer_id                  : Graphics layer ID
 * @retval      error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Graphics_Stop( graphics_layer_t layer_id )
{
    return (graphics_error_t)DRV_Graphics_Stop( (drv_graphics_layer_t)layer_id );
} /* End of method Graphics_Stop() */

/**************************************************************************//**
 * @brief       Video surface write start processing
 * @param[in]   video_input_channel        : Video input channel
 * @retval      error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Video_Start( video_input_channel_t video_input_channel )
{
    graphics_error_t error = GRAPHICS_OK;

    /*  Digital video inputs : supporting video_input_channel 0 only. */
    if( _video_input_sel == INPUT_SEL_EXT && video_input_channel == VIDEO_INPUT_CHANNEL_1 ) {
        error = GRAPHICS_PARAM_RANGE_ERR;
    }

    if( error == GRAPHICS_OK ) {
        error = (graphics_error_t)DRV_Video_Start( (drv_video_input_channel_t)video_input_channel );
    }
    return error;
} /* End of method Video_Start() */

/**************************************************************************//**
 * @brief       Video surface write stop processing
 * @param[in]   video_input_channel        : Video input channel
 * @retval      error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Video_Stop( video_input_channel_t video_input_channel )
{
    graphics_error_t error = GRAPHICS_OK;

    /*  Digital video inputs : supporting video_input_channel 0 only. */
    if( _video_input_sel == INPUT_SEL_EXT && video_input_channel == VIDEO_INPUT_CHANNEL_1 ) {
        error = GRAPHICS_PARAM_RANGE_ERR;
    }

    if( error == GRAPHICS_OK ) {
        error = (graphics_error_t)DRV_Video_Stop(
                    (drv_video_input_channel_t)video_input_channel );
    }
    return error;
} /* End of method Video_Stop() */

/**************************************************************************//**
 * @brief       Graphics surface read process setting
 *
 *              Description:<br>
 *              This function supports the following 4 image format.
 *                  YCbCr422, RGB565, RGB888, ARGB8888
 * @param[in]   layer_id                   : Graphics layer ID
 * @param[in]   framebuff                  : Base address of the frame buffer
 * @param[in]   fb_stride                  : Line offset address of the frame buffer
 * @param[in]   gr_format                  : Format of the frame buffer read signal
 * @param[in]   wr_rd_swa                  : frame buffer swap setting
 *      - WR_RD_WRSWA_NON        : Not swapped: 1-2-3-4-5-6-7-8
 *      - WR_RD_WRSWA_8BIT       : Swapped in 8-bit units: 2-1-4-3-6-5-8-7
 *      - WR_RD_WRSWA_16BIT      : Swapped in 16-bit units: 3-4-1-2-7-8-5-6
 *      - WR_RD_WRSWA_16_8BIT    : Swapped in 16-bit units + 8-bit units: 4-3-2-1-8-7-6-5
 *      - WR_RD_WRSWA_32BIT      : Swapped in 32-bit units: 5-6-7-8-1-2-3-4
 *      - WR_RD_WRSWA_32_8BIT    : Swapped in 32-bit units + 8-bit units: 6-5-8-7-2-1-4-3
 *      - WR_RD_WRSWA_32_16BIT   : Swapped in 32-bit units + 16-bit units: 7-8-5-6-3-4-1-2
 *      - WR_RD_WRSWA_32_16_8BIT : Swapped in 32-bit units + 16-bit units + 8-bit units: 8-7-6-5-4-3-2-1
 * @param[in]   gr_rect                    : Graphics display area
 * @retval      Error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Graphics_Read_Setting(
    graphics_layer_t    layer_id,
    void              * framebuff,
    unsigned int        fb_stride,
    graphics_format_t   gr_format,
    wr_rd_swa_t         wr_rd_swa,
    rect_t            * gr_rect )
{
    rect_t rect;

    rect.hs = gr_rect->hs + _lcd_config.h_back_porch;
    rect.vs = gr_rect->vs + _lcd_config.v_back_porch;
    rect.hw = gr_rect->hw;
    rect.vw = gr_rect->vw;

    return (graphics_error_t)DRV_Graphics_Read_Setting(
               (drv_graphics_layer_t)layer_id,
               framebuff,
               fb_stride,
               (drv_graphics_format_t)gr_format,
               (drv_wr_rd_swa_t)wr_rd_swa,
               (drv_rect_t *)&rect );
} /* End of method Graphics_Read_Setting() */

/**************************************************************************//**
 * @brief       Graphics surface read process changing
 *
 *              Description:<br>
 *              This function is used to swap buffers.
 *
 * @param[in]   layer_id                : Graphics layer ID
 * @param[in]   framebuff               : Base address of the frame buffer
 * @retval      Error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Graphics_Read_Change ( graphics_layer_t layer_id, void *  framebuff)
{
    return (graphics_error_t)DRV_Graphics_Read_Change(
               (drv_graphics_layer_t)layer_id, framebuff );
} /* End of method Graphics_Read_Change() */

/**************************************************************************//**
 * @brief       Video surface write process setting
 *              This function set the video write process. Input form is weave
 *              (progressive) mode fixed.
 *              This function supports the following 3 image format.
 *                  YCbCr422, RGB565, RGB888
 * @param[in]   video_input_ch          : Video input channel
 * @param[in]   col_sys                 : Analog video signal color system
 * @param[in]   adc_vinsel              : Video input pin
 * @param[in]   framebuff               : Base address of the frame buffer
 * @param[in]   fb_stride [byte]        : Line offset address of the frame buffer
 * @param[in]   video_format            : Frame buffer video-signal writing format
 *      - VIDEO_FORMAT_YCBCR422 : YCBCR422 (2byte/px)
 *      - VIDEO_FORMAT_RGB565   : RGB565 (2byte/px)
 *      - VIDEO_FORMAT_RGB888   : RGB888 (4byte/px)
 * @param[in]   wr_rd_swa               : frame buffer swap setting
 *      - WR_RD_WRSWA_NON        : Not swapped: 1-2-3-4-5-6-7-8
 *      - WR_RD_WRSWA_8BIT       : Swapped in 8-bit units: 2-1-4-3-6-5-8-7
 *      - WR_RD_WRSWA_16BIT      : Swapped in 16-bit units: 3-4-1-2-7-8-5-6
 *      - WR_RD_WRSWA_16_8BIT    : Swapped in 16-bit units + 8-bit units: 4-3-2-1-8-7-6-5
 *      - WR_RD_WRSWA_32BIT      : Swapped in 32-bit units: 5-6-7-8-1-2-3-4
 *      - WR_RD_WRSWA_32_8BIT    : Swapped in 32-bit units + 8-bit units: 6-5-8-7-2-1-4-3
 *      - WR_RD_WRSWA_32_16BIT   : Swapped in 32-bit units + 16-bit units: 7-8-5-6-3-4-1-2
 *      - WR_RD_WRSWA_32_16_8BIT : Swapped in 32-bit units + 16-bit units + 8-bit units: 8-7-6-5-4-3-2-1
 * @param[in]   video_write_size_vw [px]: output v width
 * @param[in]   video_write_size_hw [px]: output h width
 * @param[in]   video_adc_vinsel        : Input pin control
 * @retval      Error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Video_Write_Setting(
    video_input_channel_t       video_input_channel,
    graphics_video_col_sys_t    col_sys,
    void                      * framebuff,
    unsigned int                fb_stride,
    video_format_t              video_format,
    wr_rd_swa_t                 wr_rd_swa,
    unsigned short              write_buff_vw,
    unsigned short              write_buff_hw,
    video_adc_vinsel_t          video_adc_vinsel )

{
    graphics_error_t error = GRAPHICS_OK;

    if( _video_input_sel == INPUT_SEL_VDEC ) {
        if( col_sys == COL_SYS_NTSC_358 || col_sys == COL_SYS_NTSC_443 || col_sys == COL_SYS_NTSC_443_60 ) {
            if( (write_buff_vw / 2u) > 240u ) {
                error = GRAPHICS_VIDEO_NTSC_SIZE_ERR;
            }
        } else {
            if( (write_buff_vw / 2u) > 280u ) {
                error = GRAPHICS_VIDEO_PAL_SIZE_ERR;
            }
        }

        if( write_buff_hw > 800u ) {
            error = GRAPHICS_PARAM_RANGE_ERR;
        }
        if( error == GRAPHICS_OK ) {
            error = (graphics_error_t)DRV_Video_Write_Setting(
                        (drv_video_input_channel_t)video_input_channel,
                        (drv_graphics_video_col_sys_t)col_sys,
                        framebuff,
                        fb_stride,
                        (drv_video_format_t)video_format,
                        (drv_wr_rd_swa_t)wr_rd_swa,
                        write_buff_vw,
                        write_buff_hw,
                        (drv_video_adc_vinsel_t)video_adc_vinsel);
        }
    } else if( _video_input_sel == INPUT_SEL_EXT ) {
        rect_t cap_area;

        cap_area.hs = _video_ext_in_config.cap_hs_pos * 2;
        cap_area.hw = _video_ext_in_config.cap_width  * 2;
        cap_area.vs = _video_ext_in_config.cap_vs_pos;
        cap_area.vw = _video_ext_in_config.cap_height;

        error = (graphics_error_t) DRV_Video_Write_Setting_Digital(
                    framebuff,
                    fb_stride,
                    (drv_video_format_t)video_format,
                    (drv_wr_rd_swa_t)wr_rd_swa,
                    write_buff_vw,
                    write_buff_hw,
                    (drv_rect_t *)&cap_area );
    } else {
        error = GRAPHICS_PARAM_RANGE_ERR;
    }
    return error;
} /* End of method Video_Write_Setting() */

/**************************************************************************//**
 * @brief       Graphics surface write process changing
 *              This function is used to swap buffers of the weave write processing.
 * @param[in]   video_input_ch          : Video input channle
 * @param[in]   framebuff               : Base address of the frame buffer
 * @param[in]   fb_stride               : Line offset address of the frame buffer
 * @retval      Error code
******************************************************************************/
DisplayBase::graphics_error_t
DisplayBase::Video_Write_Change (
    video_input_channel_t video_input_channel, void * framebuff, uint32_t fb_stride )
{
    return (graphics_error_t)DRV_Video_Write_Change(
               (drv_video_input_channel_t)video_input_channel, framebuff, fb_stride );
} /* End of method Video_Write_Change() */

/* End of file */