Renesas / GR-PEACH_video

Video library for GR-PEACH

Dependents:   Trace_Program2 GR-PEACH_Camera_in_barcode GR-PEACH_LCD_sample GR-PEACH_LCD_4_3inch_sample ... more

Video ｌibrary for GR-PEACH.

Hello World!

Import programGR-PEACH_Camera_in

Camera in sample for GR-PEACH. This sample works on GR-LYCHEE besides GR-PEACH.

Last commit 28 Dec 2018 by Renesas

API

Import library
GR-PEACH_video - DisplayBase Class Reference

Data Structures

struct lcd_config_t
LCD configuration. More...
struct rect_t
The relative position within the graphics display area. More...
struct video_ext_in_config_t
Digital Video Input configuration. More...

Public Types

enum video_input_channel_t { VIDEO_INPUT_CHANNEL_0 = 0, VIDEO_INPUT_CHANNEL_1 }

Video input channel select.

More...
enum graphics_layer_t { GRAPHICS_LAYER_0 = 0, GRAPHICS_LAYER_1 , GRAPHICS_LAYER_2 , GRAPHICS_LAYER_3 }

Graphics layer select.

More...
enum graphics_error_t {
GRAPHICS_OK = 0, GRAPHICS_VDC5_ERR = -1, GRAPHICS_FORMA_ERR = -2, GRAPHICS_LAYER_ERR = -3,
GRAPHICS_CHANNLE_ERR = -4, GRAPHICS_VIDEO_NTSC_SIZE_ERR = -5, GRAPHICS_VIDEO_PAL_SIZE_ERR = -6, GRAPHICS_PARAM_RANGE_ERR = -7
}

Error codes.

More...
enum graphics_format_t { GRAPHICS_FORMAT_YCBCR422 = 0, GRAPHICS_FORMAT_RGB565 , GRAPHICS_FORMAT_RGB888 , GRAPHICS_FORMAT_ARGB8888 }

Graphics layer read format selects.

More...
enum video_format_t { VIDEO_FORMAT_YCBCR422 = 0, VIDEO_FORMAT_RGB565 , VIDEO_FORMAT_RGB888 }

Video writing format selects.

More...
enum wr_rd_swa_t {
WR_RD_WRSWA_NON = 0, WR_RD_WRSWA_8BIT , WR_RD_WRSWA_16BIT , WR_RD_WRSWA_16_8BIT ,
WR_RD_WRSWA_32BIT , WR_RD_WRSWA_32_8BIT , WR_RD_WRSWA_32_16BIT , WR_RD_WRSWA_32_16_8BIT
}

Frame buffer swap setting.

More...
enum lcd_tcon_pin_t { LCD_TCON_PIN_NON = -1, LCD_TCON_PIN_0 , LCD_TCON_PIN_1 , LCD_TCON_PIN_2 }

LCD tcon output pin selects.

More...
enum lcd_outformat_t { LCD_OUTFORMAT_RGB888 = 0, LCD_OUTFORMAT_RGB666 , LCD_OUTFORMAT_RGB565 }

LCD output format selects.

More...
enum edge_t { EDGE_RISING = 0, EDGE_FALLING = 1 }

Edge of a signal.

More...
enum lcd_type_t { LCD_TYPE_LVDS = 0, LCD_TYPE_PARALLEL_RGB }

LCD type.

More...
enum sig_pol_t { SIG_POL_NOT_INVERTED = 0, SIG_POL_INVERTED }

Polarity of a signal.

More...
enum int_type_t {
INT_TYPE_S0_VI_VSYNC = 0, INT_TYPE_S0_LO_VSYNC , INT_TYPE_S0_VSYNCERR , INT_TYPE_VLINE ,
INT_TYPE_S0_VFIELD , INT_TYPE_IV1_VBUFERR , INT_TYPE_IV3_VBUFERR , INT_TYPE_IV5_VBUFERR ,
INT_TYPE_IV6_VBUFERR , INT_TYPE_S0_WLINE , INT_TYPE_S1_VI_VSYNC , INT_TYPE_S1_LO_VSYNC ,
INT_TYPE_S1_VSYNCERR , INT_TYPE_S1_VFIELD , INT_TYPE_IV2_VBUFERR , INT_TYPE_IV4_VBUFERR ,
INT_TYPE_S1_WLINE , INT_TYPE_OIR_VI_VSYNC , INT_TYPE_OIR_LO_VSYNC , INT_TYPE_OIR_VLINE ,
INT_TYPE_OIR_VFIELD , INT_TYPE_IV7_VBUFERR , INT_TYPE_IV8_VBUFERR , INT_TYPE_NUM
}

Interrupt type.

More...
enum graphics_video_col_sys_t {
COL_SYS_NTSC_358 = 0, COL_SYS_NTSC_443 = 1, COL_SYS_PAL_443 = 2, COL_SYS_PAL_M = 3,
COL_SYS_PAL_N = 4, COL_SYS_SECAM = 5, COL_SYS_NTSC_443_60 = 6, COL_SYS_PAL_60 = 7
}

Video color system.

More...
enum video_input_sel_t { INPUT_SEL_VDEC = 0, INPUT_SEL_EXT = 1 }

External Input select.

More...
enum video_extin_format_t {
VIDEO_EXTIN_FORMAT_RGB888 = 0, VIDEO_EXTIN_FORMAT_RGB666 , VIDEO_EXTIN_FORMAT_RGB565 , VIDEO_EXTIN_FORMAT_BT656 ,
VIDEO_EXTIN_FORMAT_BT601 , VIDEO_EXTIN_FORMAT_YCBCR422 , VIDEO_EXTIN_FORMAT_YCBCR444
}

External input format select.

More...
enum onoff_t { OFF = 0, ON = 1 }

On/off.

More...
enum extin_input_line_t { EXTIN_LINE_525 = 0, EXTIN_LINE_625 = 1 }

Number of lines for BT.656 external input.

More...
enum extin_h_pos_t { EXTIN_H_POS_CBYCRY = 0, EXTIN_H_POS_YCRYCB , EXTIN_H_POS_CRYCBY , EXTIN_H_POS_YCBYCR }

Y/Cb/Y/Cr data string start timing.

More...

Public Member Functions

DisplayBase (void)
Constructor method of display base object.
graphics_error_t Graphics_init ( lcd_config_t *lcd_config)
Graphics initialization processing
If not using display, set NULL in parameter.
graphics_error_t Graphics_Video_init ( video_input_sel_t video_input_sel, video_ext_in_config_t *video_ext_in_config)
Graphics Video initialization processing
If setting INPUT_SEL_VDEC in video_input_sel parameter, set NULL in video_ext_in_config parameter.
graphics_error_t Graphics_Lcd_Port_Init (PinName *pin, unsigned int pin_count)
LCD output port initialization processing.
graphics_error_t Graphics_Lvds_Port_Init (PinName *pin, unsigned int pin_count)
LVDS output port initialization processing.
graphics_error_t Graphics_Dvinput_Port_Init (PinName *pin, unsigned int pin_count)
Digital video input port initialization processing.
graphics_error_t Graphics_Irq_Handler_Set ( int_type_t Graphics_Irq_Handler_Set, unsigned short num, void(*callback)( int_type_t ))
Interrupt callback setup This function performs the following processing:

  • Enables the interrupt when the pointer to the corresponding interrupt callback function is specified.

graphics_error_t Graphics_Start ( graphics_layer_t layer_id)
Start the graphics surface read process.
graphics_error_t Graphics_Stop ( graphics_layer_t layer_id)
Stop the graphics surface read process.
graphics_error_t Video_Start ( video_input_channel_t video_input_channel)
Start the video surface write process.
graphics_error_t Video_Stop ( video_input_channel_t video_input_channel)
Stop the video surface write process.
graphics_error_t Graphics_Read_Setting ( graphics_layer_t layer_id, void *framebuff, unsigned int fb_stride, graphics_format_t gr_format, wr_rd_swa_t wr_rd_swa, rect_t *gr_rect)
Graphics surface read process setting.
graphics_error_t Graphics_Read_Change ( graphics_layer_t layer_id, void *framebuff)
Graphics surface read buffer change process.
graphics_error_t Video_Write_Setting ( video_input_channel_t video_input_channel, graphics_video_col_sys_t col_sys, void *framebuff, unsigned int fb_stride, video_format_t video_format, wr_rd_swa_t wr_rd_swa, unsigned short video_write_buff_vw, unsigned short video_write_buff_hw)
Video surface write process setting.
graphics_error_t Video_Write_Change ( video_input_channel_t video_input_channel, void *framebuff, uint32_t fb_stride)
Video surface write buffer change process.

Interface

See the Pinout page for more details

Diff: gr_peach_vdc5.c

Revision:
3:e0e475089616
Parent:
2:3149baf7925b
Child:
4:aeefe5171463
--- a/gr_peach_vdc5.c	Wed Nov 25 05:11:29 2015 +0000
+++ b/gr_peach_vdc5.c	Tue May 24 02:24:47 2016 +0000
@@ -46,7 +46,6 @@
 /******************************************************************************
 Macro definitions
 ******************************************************************************/
-//#define DEBUG_USING_GENMAI_BOARD   /* debug code */
 #define STP91_BIT   (0x02u)
 #define STP90_BIT   (0x01u)
 #define STBRQ25_BIT (0x20u)
@@ -110,31 +109,60 @@
 
 static const PinMap PinMap_LCD_DISP_PIN[] = {
     {P2_7  , VDC5_CH0, 8}, /* LCD0_DATA23  */
+    {P5_7  , VDC5_CH0, 3}, /* LCD0_DATA23  */
     {P10_0 , VDC5_CH0, 5}, /* LCD0_DATA23  */
     {P2_6  , VDC5_CH0, 8}, /* LCD0_DATA22  */
+    {P5_6  , VDC5_CH0, 3}, /* LCD0_DATA22  */
+    {P10_1 , VDC5_CH0, 5}, /* LCD0_DATA22  */
     {P2_5  , VDC5_CH0, 8}, /* LCD0_DATA21  */
+    {P5_5  , VDC5_CH0, 3}, /* LCD0_DATA21  */
+    {P10_2 , VDC5_CH0, 5}, /* LCD0_DATA21  */
     {P2_4  , VDC5_CH0, 8}, /* LCD0_DATA20  */
+    {P5_4  , VDC5_CH0, 3}, /* LCD0_DATA20  */
+    {P10_3 , VDC5_CH0, 5}, /* LCD0_DATA20  */
     {P2_3  , VDC5_CH0, 8}, /* LCD0_DATA19  */
+    {P5_3  , VDC5_CH0, 3}, /* LCD0_DATA19  */
+    {P10_4 , VDC5_CH0, 5}, /* LCD0_DATA19  */
     {P2_2  , VDC5_CH0, 8}, /* LCD0_DATA18  */
+    {P5_2  , VDC5_CH0, 3}, /* LCD0_DATA18  */
+    {P10_5 , VDC5_CH0, 5}, /* LCD0_DATA18  */
     {P2_1  , VDC5_CH0, 8}, /* LCD0_DATA17  */
+    {P5_1  , VDC5_CH0, 3}, /* LCD0_DATA17  */
+    {P10_7 , VDC5_CH0, 5}, /* LCD0_DATA17  */
     {P2_0  , VDC5_CH0, 8}, /* LCD0_DATA16  */
+    {P5_0  , VDC5_CH0, 3}, /* LCD0_DATA16  */
+    {P10_6 , VDC5_CH0, 5}, /* LCD0_DATA16  */
     {P4_7  , VDC5_CH0, 1}, /* LCD0_DATA15  */
+    {P10_8 , VDC5_CH0, 5}, /* LCD0_DATA15  */
     {P4_6  , VDC5_CH0, 1}, /* LCD0_DATA14  */
+    {P10_9 , VDC5_CH0, 5}, /* LCD0_DATA14  */
     {P4_5  , VDC5_CH0, 1}, /* LCD0_DATA13  */
+    {P10_10, VDC5_CH0, 5}, /* LCD0_DATA13  */
     {P4_4  , VDC5_CH0, 1}, /* LCD0_DATA12  */
+    {P10_11, VDC5_CH0, 5}, /* LCD0_DATA12  */
     {P10_12, VDC5_CH0, 5}, /* LCD0_DATA11  */
     {P10_13, VDC5_CH0, 5}, /* LCD0_DATA10  */
     {P10_14, VDC5_CH0, 5}, /* LCD0_DATA9   */
     {P4_0  , VDC5_CH0, 1}, /* LCD0_DATA8   */
     {P10_15, VDC5_CH0, 5}, /* LCD0_DATA8   */
     {P3_15 , VDC5_CH0, 1}, /* LCD0_DATA7   */
+    {P11_0 , VDC5_CH0, 5}, /* LCD0_DATA7   */
     {P3_14 , VDC5_CH0, 1}, /* LCD0_DATA6   */
+    {P11_1 , VDC5_CH0, 5}, /* LCD0_DATA6   */
     {P3_13 , VDC5_CH0, 1}, /* LCD0_DATA5   */
+    {P11_2 , VDC5_CH0, 5}, /* LCD0_DATA5   */
     {P3_12 , VDC5_CH0, 1}, /* LCD0_DATA4   */
+    {P11_3 , VDC5_CH0, 5}, /* LCD0_DATA4   */
     {P3_11 , VDC5_CH0, 1}, /* LCD0_DATA3   */
+    {P11_4 , VDC5_CH0, 5}, /* LCD0_DATA3   */
     {P3_10 , VDC5_CH0, 1}, /* LCD0_DATA2   */
+    {P11_5 , VDC5_CH0, 5}, /* LCD0_DATA2   */
     {P3_9  , VDC5_CH0, 1}, /* LCD0_DATA1   */
+    {P11_6 , VDC5_CH0, 5}, /* LCD0_DATA1   */
     {P3_8  , VDC5_CH0, 1}, /* LCD0_DATA0   */
+    {P11_7 , VDC5_CH0, 5}, /* LCD0_DATA0   */
+    {P11_10, VDC5_CH0, 5}, /* LCD0_TCON4   */
+    {P11_11, VDC5_CH0, 5}, /* LCD0_TCON3   */
     {P11_12, VDC5_CH0, 5}, /* LCD0_TCON2   */
     {P3_2  , VDC5_CH0, 1}, /* LCD0_TCON1   */
     {P11_13, VDC5_CH0, 5}, /* LCD0_TCON1   */
@@ -142,37 +170,6 @@
     {P11_15, VDC5_CH0, 5}, /* LCD0_CLK     */
     {NC    , NC   , 0}
 };
-#ifdef DEBUG_USING_GENMAI_BOARD
-static const PinMap PinMap_LCD_DISP_GENMAI_PC_MONI_PIN[] = {
-    {P10_0  , VDC5_CH0, 5}, /* LCD0_DATA23  */
-    {P10_1  , VDC5_CH0, 5}, /* LCD0_DATA22  */
-    {P10_2  , VDC5_CH0, 5}, /* LCD0_DATA21  */
-    {P10_3  , VDC5_CH0, 5}, /* LCD0_DATA20  */
-    {P10_4  , VDC5_CH0, 5}, /* LCD0_DATA19  */
-    {P10_5  , VDC5_CH0, 5}, /* LCD0_DATA18  */
-    {P10_7  , VDC5_CH0, 5}, /* LCD0_DATA17  */
-    {P10_8  , VDC5_CH0, 5}, /* LCD0_DATA16  */
-    {P10_9  , VDC5_CH0, 5}, /* LCD0_DATA14  */
-    {P10_10 , VDC5_CH0, 5}, /* LCD0_DATA13  */
-    {P10_11 , VDC5_CH0, 5}, /* LCD0_DATA12  */
-    {P10_12 , VDC5_CH0, 5}, /* LCD0_DATA11  */
-    {P10_13 , VDC5_CH0, 5}, /* LCD0_DATA10  */
-    {P10_14 , VDC5_CH0, 5}, /* LCD0_DATA9   */
-    {P10_15 , VDC5_CH0, 5}, /* LCD0_DATA8   */
-    {P11_0  , VDC5_CH0, 5}, /* LCD0_DATA7   */
-    {P11_1  , VDC5_CH0, 5}, /* LCD0_DATA6   */
-    {P11_2  , VDC5_CH0, 5}, /* LCD0_DATA5   */
-    {P11_3  , VDC5_CH0, 5}, /* LCD0_DATA4   */
-    {P11_4  , VDC5_CH0, 5}, /* LCD0_DATA3   */
-    {P11_5  , VDC5_CH0, 5}, /* LCD0_DATA2   */
-    {P11_6  , VDC5_CH0, 5}, /* LCD0_DATA1   */
-    {P11_7  , VDC5_CH0, 5}, /* LCD0_DATA0   */
-    {P11_13 , VDC5_CH0, 5}, /* LCD0_TCON1   */
-    {P11_14 , VDC5_CH0, 5}, /* LCD0_TCON0   */
-    {P11_15 , VDC5_CH0, 5}, /* LCD0_CLK     */
-    {NC    , NC   , 0}
-};
-#endif /* DEBUG_USING_GENMAI_BOARD */
 
 static const PinMap PinMap_LVDS_DISP_PIN[] = {
     {P5_7  , VDC5_CH0, 1}, /* TXOUT0M   */
@@ -347,14 +344,8 @@
     uint32_t count;
 
     for( count = 0 ; count < pin_count ; count++ ) {
-#ifndef DEBUG_USING_GENMAI_BOARD
         pinmap_peripheral(pin[count], PinMap_LCD_DISP_PIN);
         pinmap_pinout(pin[count], PinMap_LCD_DISP_PIN);
-#else
-        /* debug code */
-        pinmap_peripheral(pin[count], PinMap_LCD_DISP_GENMAI_PC_MONI_PIN);
-        pinmap_pinout(pin[count], PinMap_LCD_DISP_GENMAI_PC_MONI_PIN);
-#endif /* DEBUG_USING_GENMAI_BOARD */
     }
     return drv_error;
 } /* End of function DRV_Graphics_Lcd_Port_Init() */