Renesas / Mbed OS GR-PEACH_mbed-os-client-ZXingSample

This is a mbed Client sample where ZXing is incorporated, and works on GR-PEACH and GR-LYCHEE.

Dependencies:   DisplayApp AsciiFont

Overview

This sample program shows how to use mbed Client together with ZXing which is an open-source, multi-format 1D/2D barcode image processing library. For more info on ZXing, please refer to https://github.com/zxing/zxing.

Required hardware

Application setup

  1. Select the connection type. For details, please refer to the following wiki:
    https://os.mbed.com/teams/Renesas/code/GR-PEACH_mbed-os-client-ZXingSample/wiki/Connection-type.
  2. Set the client credentials. For details, please refer to the following wiki:
    https://os.mbed.com/teams/Renesas/code/GR-PEACH_mbed-os-client-ZXingSample/wiki/Client-credentials.
  3. Change Ethernet settings. For details, please refer to the following wiki:
    https://developer.mbed.org/teams/Renesas/code/GR-PEACH_mbed-os-client-ZXingSample/wiki/Ethernet-settings.
  4. Change Wifi settings. For details, please refer to the following wiki:
    https://os.mbed.com/teams/Renesas/code/GR-PEACH_mbed-os-client-ZXingSample/wiki/Wifi-settings.
  5. Set up an IP address. (This step is optional.) For details, please refer to the following wiki:
    https://os.mbed.com/teams/Renesas/code/GR-PEACH_mbed-os-client-ZXingSample/wiki/IP-address-setup.

Building the example

To build this example:

  1. Import this example onto mbed Compiler.
  2. Configure the example in accordance with Application setup.
  3. Compile the example on mbed Compiler and download the resultant binary file.
  4. Plug the Ethernet cable into GR-PEACH or GR-LYCHEE if you are using Ethernet mode.
  5. Plug the micro-USB cable into the OpenSDA port which lies on the next to the RESET button.
  6. Copy the binary previously downloaded to your PC to GR-PEACH or GR-LYCHEE to flash this example. When the copy is successfully completed, the board is ready to work.
  7. Press the RESET button on the board to run the example.
  8. For verification, please refer to the following wiki:
    https://developer.mbed.org/teams/Renesas/code/GR-PEACH_mbed-os-client-ZXingSample/wiki/Monitoring-the-application.

Application resources

This example exposes four resources listed below:

  1. 3202/0/5700. Decode result of barcode data input from camera (GET).
  2. 3201/0/5850. Blink function, blinks LED when executed (POST).
  3. 3201/0/5853. Blink pattern, used by the blink function to determine how to blink. In the format of 1000:500:1000:500:1000:500 (PUT).
  4. 3201/0/5855. Blink color, used by the blink function. Any of red, green, blue, cyan, yellow and magenta is acceptable if you are using GR-PEACH board (PUT).
  5. 3201/0/5855. Blink color, used by the blink function. Any of green, yellow, orange and red is acceptable if you are using GR-LYCHEE board (PUT).

For more info on how to get notifications when resource 1 changes, or how to use resource 2, 3 and 4, please look at

Import programGR-PEACH_mbed-connector-ZXingSample-node

Node.js based Web Application for mbed Device Connector specific to GR-PEACH_mbed-os-client-ZXingSample

Last commit 10 Mar 2017 by Renesas

easy-connect/easy-connect.h

Committer:
1050186
Date:
2018-12-13
Revision:
7:f9c1728de5c5

File content as of revision 7:f9c1728de5c5:

#ifndef __MAGIC_CONNECT_H__
#define __MAGIC_CONNECT_H__

#include "mbed.h"

#define ETHERNET        1
#define WIFI_ESP8266    2
#define WIFI_BP3595     3
#define WIFI_ESP32      4

#if MBED_CONF_APP_NETWORK_INTERFACE == WIFI_ESP8266
#include "ESP8266Interface.h"

#ifdef MBED_CONF_APP_ESP8266_DEBUG
ESP8266Interface wifi(MBED_CONF_APP_ESP8266_TX, MBED_CONF_APP_ESP8266_RX, MBED_CONF_APP_ESP8266_DEBUG);
#else
ESP8266Interface wifi(MBED_CONF_APP_ESP8266_TX, MBED_CONF_APP_ESP8266_RX);
#endif

#elif MBED_CONF_APP_NETWORK_INTERFACE == WIFI_BP3595
#include "LWIPBP3595Interface.h"
LWIPBP3595Interface wifi;
#elif MBED_CONF_APP_NETWORK_INTERFACE == WIFI_ESP32
#include "ESP32Interface.h"
ESP32Interface wifi(MBED_CONF_EASY_CONNECT_WIFI_ESP32_EN, MBED_CONF_EASY_CONNECT_WIFI_ESP32_IO0, MBED_CONF_EASY_CONNECT_WIFI_ESP32_TX, MBED_CONF_EASY_CONNECT_WIFI_ESP32_RX);
#elif MBED_CONF_APP_NETWORK_INTERFACE == ETHERNET
#include "EthernetInterface.h"
EthernetInterface eth;
#else
#error "No connectivity method chosen. Please add 'config.network-interfaces.value' to your mbed_app.json (see README.md for more information)."
#endif

// This is address to mbed Device Connector
#define MBED_SERVER_ADDRESS "coap://api.connector.mbed.com:5684"

#ifdef MBED_CONF_APP_ESP8266_SSID
#define MBED_CONF_APP_WIFI_SSID MBED_CONF_APP_ESP8266_SSID
#endif

#ifdef MBED_CONF_APP_ESP8266_PASSWORD
#define MBED_CONF_APP_WIFI_PASSWORD MBED_CONF_APP_ESP8266_PASSWORD
#endif

#ifndef MBED_CONF_APP_WIFI_SECURITY
#define MBED_CONF_APP_WIFI_SECURITY NSAPI_SECURITY_WPA_WPA2
#endif

NetworkInterface* easy_connect(bool log_messages = false) {
    NetworkInterface* network_interface = 0;
    int connect_success = -1;
#if MBED_CONF_APP_NETWORK_INTERFACE == WIFI_ESP8266
    if (log_messages) {
        printf("[EasyConnect] Using WiFi (ESP8266) \n");
        printf("[EasyConnect] Connecting to WiFi %s\n", MBED_CONF_APP_WIFI_SSID);
    }
    connect_success = wifi.connect(MBED_CONF_APP_WIFI_SSID, MBED_CONF_APP_WIFI_PASSWORD, MBED_CONF_APP_WIFI_SECURITY);
    network_interface = &wifi;
#elif MBED_CONF_APP_NETWORK_INTERFACE == WIFI_BP3595
    if (log_messages) {
        printf("[EasyConnect] Using WiFi (BP3595) \n");
        printf("[EasyConnect] Connecting to WiFi %s\n", MBED_CONF_APP_WIFI_SSID);
    }
    connect_success = wifi.connect(MBED_CONF_APP_WIFI_SSID, MBED_CONF_APP_WIFI_PASSWORD, MBED_CONF_APP_WIFI_SECURITY);
    network_interface = &wifi;
#elif MBED_CONF_APP_NETWORK_INTERFACE == WIFI_ESP32
    if (log_messages) {
        printf("[EasyConnect] Using WiFi (ESP32) \n");
        printf("[EasyConnect] Connecting to WiFi %s\n", MBED_CONF_APP_WIFI_SSID);
    }
    connect_success = wifi.connect(MBED_CONF_APP_WIFI_SSID, MBED_CONF_APP_WIFI_PASSWORD, MBED_CONF_APP_WIFI_SECURITY);
    network_interface = &wifi;
#elif MBED_CONF_APP_NETWORK_INTERFACE == ETHERNET
    if (log_messages) {
        printf("[EasyConnect] Using Ethernet\n");
    }
    connect_success = eth.connect();
    network_interface = ð
#endif
    if(connect_success == 0) {
        if (log_messages) {
            printf("[EasyConnect] Connected to Network successfully\n");
        }
    } else {
        if (log_messages) {
            printf("[EasyConnect] Connection to Network Failed %d!\n", connect_success);
        }
        return NULL;
    }
    const char *ip_addr  = network_interface->get_ip_address();
    const char *mac_addr = network_interface->get_mac_address();
    if (ip_addr == NULL) {
        if (log_messages) {
            printf("[EasyConnect] ERROR - No IP address\n");
        }
        return NULL;
    }
    if (mac_addr == NULL) {
        if (log_messages) {
            printf("[EasyConnect] ERROR - No MAC address\n");
        }
        return NULL;
    }
    if (log_messages) {
        printf("[EasyConnect] IP address %s\n", ip_addr);
        printf("[EasyConnect] MAC address %s\n", mac_addr);
    }
    return network_interface;
}

#endif // __MAGIC_CONNECT_H__