The "GR-PEACH_Audio_Playback_7InchLCD_Sample" is a sample code that can provides high-resolution audio playback of FLAC format files. It also allows the user to audio-playback control functions such as play, pause, and stop by manipulating key switches.
Dependencies: GR-PEACH_video R_BSP TLV320_RBSP USBHost_custom
Fork of GR-PEACH_Audio_Playback_Sample by
Note
For a sample program of without LCD Board, please refer to GR-PEACH_Audio_Playback_Sample.
Introduction
The "GR-PEACH_Audio_Playback_7InchLCD_Sample" is a sample code that can provides high-resolution audio playback of FLAC format files. It also allows the user to audio-playback control functions such as play, pause, and stop by manipulating key switches.
1. Overview of the Sample Code
1.1 Software Block Diagram
Figure 1.1 shows the software block diagram.
1.2 Pin Definitions
Table 1.1 shows the pins used in this sample code.
2. Sample Code Operating Environment
In order to operate this sample code, GR-PEACH, Audio Camera Shield and 7.1 inch LCD Shield must be needed. For details on Audio Camera Shield and 7.1 inch LCD Shield, please refer to the following links, respectively:
- Audio Camera Shield
https://developer.mbed.org/teams/Renesas/wiki/Audio_Camera-shield - 7.1 inch LCD Shield
https://developer.mbed.org/teams/Renesas/wiki/LCD-shield
In this section, it is described that how board is configured and to control audio playback via command line and touch screen.
2.1 Operating Environment
Figure 2.1 shows the overview of the operating environment for this sample code.
Figure 2.2 and 2.3 show how to configure GR-PEACH, Audio Camera Shield and 7.1 inch LCD shield when using USB0 and USB1, respectively.
Table 2.1 lists the overview of Graphical User Interface (GUI) of this sample code.
2.2 List of User Operations
Table 2.2 shows the relationship among Audio Playback, Command Line and Onboard Switch.
3. Function Outline
Table 3.1, 3.2 and 3.3 shows the overview of functions implemented in this sample code.
3.1 Playback Control
This sample program supports the operation "play", "pause", "stop", "play next song" and "play previous song".
3.2 Trick Play Control
In order to enable/disable Repeat Mode, user need to type "repeat" on command line or click the corresponding icon shown in Table 2.2. By derault, Repeat Mode is enabled. When Repeat Mode is enabled, the first song is played back after the playback of the last song is finished. Otherwise, the playback is shopped when finishing to play back the last song.
3.3 How to see Song Information
The information of the song being played back can be seen by typing playinfo on command line. Table 3.4 lists the items user can see on the terminal.
3.4 How to analyze the folder structure in USB stick
In this sample code, the folder structure in USB stick is analyzed in the breadth-first order. Table 3.5 shows how the files in USB stick are numbered.
4.Others
4.1 Serial Communication Setting
With respect to the default serial communication related setting on mbed, please refer to the follwing link:
https://developer.mbed.org/teams/Renesas/wiki/GR-PEACH-Getting-Started#install-the-usb-serial-communication
Please set up the terminal software you would like to use on your PC in consideration of the above. For example, 9600 should be specified for the baud rate on the terminal in order to control this sample via command line.
4.2 Necessary modification when using GCC ARM Embedded
If you would like to use GCC ARM Embedded, you must revise the following linker script incorporated in mbed OS 5 package as follows:
- Linker Script to be modified
$(PROJECT_ROOT)/mbed-os/targets/TARGET_RENESAS/TARGET_RZ_A1H/device/TOOLCHAIN_GCC_ARM/RZA1H.ld
Please note that $(PROJECT_ROOT) in the above denotes the root directory of this sample code
- Before Modification
RZA1H.ld
/* Linker script for mbed RZ_A1H */
/* Linker script to configure memory regions. */
MEMORY
{
ROM (rx) : ORIGIN = 0x00000000, LENGTH = 0x02000000
BOOT_LOADER (rx) : ORIGIN = 0x18000000, LENGTH = 0x00004000
SFLASH (rx) : ORIGIN = 0x18004000, LENGTH = 0x07FFC000
L_TTB (rw) : ORIGIN = 0x20000000, LENGTH = 0x00004000
RAM (rwx) : ORIGIN = 0x20020000, LENGTH = 0x00700000
RAM_NC (rwx) : ORIGIN = 0x20900000, LENGTH = 0x00100000
}
(snip)
- After Modification
RZA1H.ld
/* Linker script for mbed RZ_A1H */
/* Linker script to configure memory regions. */
MEMORY
{
ROM (rx) : ORIGIN = 0x00000000, LENGTH = 0x02000000
BOOT_LOADER (rx) : ORIGIN = 0x18000000, LENGTH = 0x00004000
SFLASH (rx) : ORIGIN = 0x18004000, LENGTH = 0x07FFC000
L_TTB (rw) : ORIGIN = 0x20000000, LENGTH = 0x00004000
RAM (rwx) : ORIGIN = 0x20020000, LENGTH = 0x00180000
RAM_NC (rwx) : ORIGIN = 0x20200000, LENGTH = 0x00680000
}
(snip)
flac/src/libFLAC/include/private/cpu.h
- Committer:
- dkato
- Date:
- 2015-10-16
- Revision:
- 0:ee40da884cfc
File content as of revision 0:ee40da884cfc:
/* libFLAC - Free Lossless Audio Codec library
* Copyright (C) 2001-2009 Josh Coalson
* Copyright (C) 2011-2014 Xiph.Org Foundation
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* - Neither the name of the Xiph.org Foundation nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef FLAC__PRIVATE__CPU_H
#define FLAC__PRIVATE__CPU_H
#include "FLAC/ordinals.h"
#ifdef HAVE_CONFIG_H
#include <config.h>
#endif
#if defined FLAC__HAS_X86INTRIN
/* SSE intrinsics support by ICC/MSVC/GCC */
#if defined __INTEL_COMPILER
#define FLAC__SSE_TARGET(x)
#define FLAC__SSE_SUPPORTED 1
#define FLAC__SSE2_SUPPORTED 1
#if (__INTEL_COMPILER >= 1000) /* Intel C++ Compiler 10.0 */
#define FLAC__SSSE3_SUPPORTED 1
#define FLAC__SSE4_1_SUPPORTED 1
#endif
#if (__INTEL_COMPILER >= 1110) /* Intel C++ Compiler 11.1 */
#define FLAC__AVX_SUPPORTED 1
#endif
#if (__INTEL_COMPILER >= 1300) /* Intel C++ Compiler 13.0 */
#define FLAC__AVX2_SUPPORTED 1
#define FLAC__FMA_SUPPORTED 1
#endif
#elif defined _MSC_VER
#define FLAC__SSE_TARGET(x)
#define FLAC__SSE_SUPPORTED 1
#define FLAC__SSE2_SUPPORTED 1
#if (_MSC_VER >= 1500) /* MS Visual Studio 2008 */
#define FLAC__SSSE3_SUPPORTED 1
#define FLAC__SSE4_1_SUPPORTED 1
#endif
#if (_MSC_FULL_VER >= 160040219) /* MS Visual Studio 2010 SP1 */
#define FLAC__AVX_SUPPORTED 1
#endif
#if (_MSC_VER >= 1700) /* MS Visual Studio 2012 */
#define FLAC__AVX2_SUPPORTED 1
#define FLAC__FMA_SUPPORTED 1
#endif
#elif defined __GNUC__
#if (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 9)) /* since GCC 4.9 -msse.. compiler options aren't necessary */
#define FLAC__SSE_TARGET(x) __attribute__ ((__target__ (x)))
#define FLAC__SSE_SUPPORTED 1
#define FLAC__SSE2_SUPPORTED 1
#define FLAC__SSSE3_SUPPORTED 1
#define FLAC__SSE4_1_SUPPORTED 1
#define FLAC__AVX_SUPPORTED 1
#define FLAC__AVX2_SUPPORTED 1
#define FLAC__FMA_SUPPORTED 1
#else /* for GCC older than 4.9 */
#define FLAC__SSE_TARGET(x)
#ifdef __SSE__
#define FLAC__SSE_SUPPORTED 1
#endif
#ifdef __SSE2__
#define FLAC__SSE2_SUPPORTED 1
#endif
#ifdef __SSSE3__
#define FLAC__SSSE3_SUPPORTED 1
#endif
#ifdef __SSE4_1__
#define FLAC__SSE4_1_SUPPORTED 1
#endif
#ifdef __AVX__
#define FLAC__AVX_SUPPORTED 1
#endif
#ifdef __AVX2__
#define FLAC__AVX2_SUPPORTED 1
#endif
#ifdef __FMA__
#define FLAC__FMA_SUPPORTED 1
#endif
#endif /* GCC version */
#endif /* compiler version */
#endif /* intrinsics support */
typedef enum {
FLAC__CPUINFO_TYPE_IA32,
FLAC__CPUINFO_TYPE_X86_64,
FLAC__CPUINFO_TYPE_UNKNOWN
} FLAC__CPUInfo_Type;
#if defined FLAC__CPU_IA32
typedef struct {
FLAC__bool cmov;
FLAC__bool mmx;
FLAC__bool sse;
FLAC__bool sse2;
FLAC__bool sse3;
FLAC__bool ssse3;
FLAC__bool sse41;
FLAC__bool sse42;
FLAC__bool avx;
FLAC__bool avx2;
FLAC__bool fma;
} FLAC__CPUInfo_IA32;
#elif defined FLAC__CPU_X86_64
typedef struct {
FLAC__bool sse3;
FLAC__bool ssse3;
FLAC__bool sse41;
FLAC__bool sse42;
FLAC__bool avx;
FLAC__bool avx2;
FLAC__bool fma;
} FLAC__CPUInfo_x86;
#endif
typedef struct {
FLAC__bool use_asm;
FLAC__CPUInfo_Type type;
#if defined FLAC__CPU_IA32
FLAC__CPUInfo_IA32 ia32;
#elif defined FLAC__CPU_X86_64
FLAC__CPUInfo_x86 x86;
#endif
} FLAC__CPUInfo;
void FLAC__cpu_info(FLAC__CPUInfo *info);
#ifndef FLAC__NO_ASM
# if defined FLAC__CPU_IA32 && defined FLAC__HAS_NASM
FLAC__uint32 FLAC__cpu_have_cpuid_asm_ia32(void);
void FLAC__cpu_info_asm_ia32(FLAC__uint32 *flags_edx, FLAC__uint32 *flags_ecx);
# endif
# if (defined FLAC__CPU_IA32 || defined FLAC__CPU_X86_64) && defined FLAC__HAS_X86INTRIN
FLAC__uint32 FLAC__cpu_have_cpuid_x86(void);
void FLAC__cpu_info_x86(FLAC__uint32 level, FLAC__uint32 *eax, FLAC__uint32 *ebx, FLAC__uint32 *ecx, FLAC__uint32 *edx);
FLAC__uint32 FLAC__cpu_xgetbv_x86(void);
# endif
#endif
#endif
