Renesas / Mbed OS GR-PEACH_Audio_Playback_7InchLCD_Sample

The "GR-PEACH_Audio_Playback_7InchLCD_Sample" is a sample code that can provides high-resolution audio playback of FLAC format files. It also allows the user to audio-playback control functions such as play, pause, and stop by manipulating key switches.

Dependencies:   GR-PEACH_video R_BSP TLV320_RBSP USBHost_custom

Fork of GR-PEACH_Audio_Playback_Sample by Renesas

Note

For a sample program of without LCD Board, please refer to GR-PEACH_Audio_Playback_Sample.

Introduction

The "GR-PEACH_Audio_Playback_7InchLCD_Sample" is a sample code that can provides high-resolution audio playback of FLAC format files. It also allows the user to audio-playback control functions such as play, pause, and stop by manipulating key switches.

1. Overview of the Sample Code

1.1 Software Block Diagram

Figure 1.1 shows the software block diagram.

/media/uploads/1050186/lcd_figure1_1.png

1.2 Pin Definitions

Table 1.1 shows the pins used in this sample code.

/media/uploads/1050186/lcd_table1_1.png

2. Sample Code Operating Environment

In order to operate this sample code, GR-PEACH, Audio Camera Shield and 7.1 inch LCD Shield must be needed. For details on Audio Camera Shield and 7.1 inch LCD Shield, please refer to the following links, respectively:

In this section, it is described that how board is configured and to control audio playback via command line and touch screen.

2.1 Operating Environment

Figure 2.1 shows the overview of the operating environment for this sample code.

/media/uploads/1050186/lcd_figure2_1.png

Figure 2.2 and 2.3 show how to configure GR-PEACH, Audio Camera Shield and 7.1 inch LCD shield when using USB0 and USB1, respectively.

/media/uploads/1050186/lcd_figure2_2.png /media/uploads/1050186/lcd_figure2_3.png

Table 2.1 lists the overview of Graphical User Interface (GUI) of this sample code.

/media/uploads/1050186/lcd_table2_1.png

2.2 List of User Operations

Table 2.2 shows the relationship among Audio Playback, Command Line and Onboard Switch.

/media/uploads/1050186/lcd_table2_2.png

3. Function Outline

Table 3.1, 3.2 and 3.3 shows the overview of functions implemented in this sample code.

/media/uploads/1050186/lcd_table3_1.png /media/uploads/1050186/lcd_table3_2.png /media/uploads/1050186/lcd_table3_3.png /media/uploads/1050186/lcd_figure3_1.png

3.1 Playback Control

This sample program supports the operation "play", "pause", "stop", "play next song" and "play previous song".

3.2 Trick Play Control

In order to enable/disable Repeat Mode, user need to type "repeat" on command line or click the corresponding icon shown in Table 2.2. By derault, Repeat Mode is enabled. When Repeat Mode is enabled, the first song is played back after the playback of the last song is finished. Otherwise, the playback is shopped when finishing to play back the last song.

3.3 How to see Song Information

The information of the song being played back can be seen by typing playinfo on command line. Table 3.4 lists the items user can see on the terminal.

/media/uploads/dkato/audioplayback_table3_4.png

3.4 How to analyze the folder structure in USB stick

In this sample code, the folder structure in USB stick is analyzed in the breadth-first order. Table 3.5 shows how the files in USB stick are numbered.

/media/uploads/dkato/audioplayback_table3_5.png

4.Others

4.1 Serial Communication Setting

With respect to the default serial communication related setting on mbed, please refer to the follwing link:
https://developer.mbed.org/teams/Renesas/wiki/GR-PEACH-Getting-Started#install-the-usb-serial-communication
Please set up the terminal software you would like to use on your PC in consideration of the above. For example, 9600 should be specified for the baud rate on the terminal in order to control this sample via command line.

4.2 Necessary modification when using GCC ARM Embedded

If you would like to use GCC ARM Embedded, you must revise the following linker script incorporated in mbed OS 5 package as follows:

  • Linker Script to be modified
    $(PROJECT_ROOT)/mbed-os/targets/TARGET_RENESAS/TARGET_RZ_A1H/device/TOOLCHAIN_GCC_ARM/RZA1H.ld

    Please note that $(PROJECT_ROOT) in the above denotes the root directory of this sample code

  • Before Modification

RZA1H.ld

/* Linker script for mbed RZ_A1H */

/* Linker script to configure memory regions. */
MEMORY
{
  ROM   (rx)  : ORIGIN = 0x00000000, LENGTH = 0x02000000
  BOOT_LOADER (rx) : ORIGIN = 0x18000000, LENGTH = 0x00004000 
  SFLASH (rx) : ORIGIN = 0x18004000, LENGTH = 0x07FFC000 
  L_TTB (rw)  : ORIGIN = 0x20000000, LENGTH = 0x00004000 
  RAM (rwx) : ORIGIN = 0x20020000, LENGTH = 0x00700000
  RAM_NC (rwx) : ORIGIN = 0x20900000, LENGTH = 0x00100000
}
(snip)
  • After Modification

RZA1H.ld

/* Linker script for mbed RZ_A1H */

/* Linker script to configure memory regions. */
MEMORY
{
  ROM   (rx)  : ORIGIN = 0x00000000, LENGTH = 0x02000000
  BOOT_LOADER (rx) : ORIGIN = 0x18000000, LENGTH = 0x00004000 
  SFLASH (rx) : ORIGIN = 0x18004000, LENGTH = 0x07FFC000 
  L_TTB (rw)  : ORIGIN = 0x20000000, LENGTH = 0x00004000 
  RAM (rwx) : ORIGIN = 0x20020000, LENGTH = 0x00180000
  RAM_NC (rwx) : ORIGIN = 0x20200000, LENGTH = 0x00680000
}
(snip)

flac/src/libFLAC/include/private/bitmath.h

Committer:
dkato
Date:
2015-10-16
Revision:
0:ee40da884cfc

File content as of revision 0:ee40da884cfc:

/* libFLAC - Free Lossless Audio Codec library
 * Copyright (C) 2001-2009  Josh Coalson
 * Copyright (C) 2011-2014  Xiph.Org Foundation
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 * notice, this list of conditions and the following disclaimer.
 *
 * - Redistributions in binary form must reproduce the above copyright
 * notice, this list of conditions and the following disclaimer in the
 * documentation and/or other materials provided with the distribution.
 *
 * - Neither the name of the Xiph.org Foundation nor the names of its
 * contributors may be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef FLAC__PRIVATE__BITMATH_H
#define FLAC__PRIVATE__BITMATH_H

#include "FLAC/ordinals.h"
#include "FLAC/assert.h"

/* for CHAR_BIT */
#include <limits.h>
#include "share/compat.h"

#if defined(_MSC_VER) && (_MSC_VER >= 1400)
#include <intrin.h> /* for _BitScanReverse* */
#endif

/* Will never be emitted for MSVC, GCC, Intel compilers */
static inline unsigned int FLAC__clz_soft_uint32(unsigned int word)
{
    static const unsigned char byte_to_unary_table[] = {
    8, 7, 6, 6, 5, 5, 5, 5, 4, 4, 4, 4, 4, 4, 4, 4,
    3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
    2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
    2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
    1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
    1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
    1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
    1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
    };

    return (word) > 0xffffff ? byte_to_unary_table[(word) >> 24] :
    (word) > 0xffff ? byte_to_unary_table[(word) >> 16] + 8 :
    (word) > 0xff ? byte_to_unary_table[(word) >> 8] + 16 :
    byte_to_unary_table[(word)] + 24;
}

static inline unsigned int FLAC__clz_uint32(FLAC__uint32 v)
{
/* Never used with input 0 */
    FLAC__ASSERT(v > 0);
#if defined(__INTEL_COMPILER)
    return _bit_scan_reverse(v) ^ 31U;
#elif defined(__GNUC__) && (__GNUC__ >= 4 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4))
/* This will translate either to (bsr ^ 31U), clz , ctlz, cntlz, lzcnt depending on
 * -march= setting or to a software routine in exotic machines. */
    return __builtin_clz(v);
#elif defined(_MSC_VER) && (_MSC_VER >= 1400)
    {
        unsigned long idx;
        _BitScanReverse(&idx, v);
        return idx ^ 31U;
    }
#else
    return FLAC__clz_soft_uint32(v);
#endif
}

/* This one works with input 0 */
static inline unsigned int FLAC__clz2_uint32(FLAC__uint32 v)
{
    if (!v)
        return 32;
    return FLAC__clz_uint32(v);
}

/* An example of what FLAC__bitmath_ilog2() computes:
 *
 * ilog2( 0) = assertion failure
 * ilog2( 1) = 0
 * ilog2( 2) = 1
 * ilog2( 3) = 1
 * ilog2( 4) = 2
 * ilog2( 5) = 2
 * ilog2( 6) = 2
 * ilog2( 7) = 2
 * ilog2( 8) = 3
 * ilog2( 9) = 3
 * ilog2(10) = 3
 * ilog2(11) = 3
 * ilog2(12) = 3
 * ilog2(13) = 3
 * ilog2(14) = 3
 * ilog2(15) = 3
 * ilog2(16) = 4
 * ilog2(17) = 4
 * ilog2(18) = 4
 */

static inline unsigned FLAC__bitmath_ilog2(FLAC__uint32 v)
{
    FLAC__ASSERT(v > 0);
#if defined(__INTEL_COMPILER)
    return _bit_scan_reverse(v);
#elif defined(_MSC_VER) && (_MSC_VER >= 1400)
    {
        unsigned long idx;
        _BitScanReverse(&idx, v);
        return idx;
    }
#else
    return sizeof(FLAC__uint32) * CHAR_BIT  - 1 - FLAC__clz_uint32(v);
#endif
}


#ifdef FLAC__INTEGER_ONLY_LIBRARY /* Unused otherwise */

static inline unsigned FLAC__bitmath_ilog2_wide(FLAC__uint64 v)
{
    FLAC__ASSERT(v > 0);
#if defined(__GNUC__) && (__GNUC__ >= 4 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4))
    return sizeof(FLAC__uint64) * CHAR_BIT - 1 - __builtin_clzll(v);
/* Sorry, only supported in x64/Itanium.. and both have fast FPU which makes integer-only encoder pointless */
#elif (defined(_MSC_VER) && (_MSC_VER >= 1400)) && (defined(_M_IA64) || defined(_M_X64))
    {
        unsigned long idx;
        _BitScanReverse64(&idx, v);
        return idx;
    }
#else
/*  Brain-damaged compilers will use the fastest possible way that is,
    de Bruijn sequences (http://supertech.csail.mit.edu/papers/debruijn.pdf)
    (C) Timothy B. Terriberry (tterribe@xiph.org) 2001-2009 CC0 (Public domain).
*/
    {
        static const unsigned char DEBRUIJN_IDX64[64]={
            0, 1, 2, 7, 3,13, 8,19, 4,25,14,28, 9,34,20,40,
            5,17,26,38,15,46,29,48,10,31,35,54,21,50,41,57,
            63, 6,12,18,24,27,33,39,16,37,45,47,30,53,49,56,
            62,11,23,32,36,44,52,55,61,22,43,51,60,42,59,58
        };
        v|= v>>1;
        v|= v>>2;
        v|= v>>4;
        v|= v>>8;
        v|= v>>16;
        v|= v>>32;
        v= (v>>1)+1;
        return DEBRUIJN_IDX64[v*0x218A392CD3D5DBF>>58&0x3F];
    }
#endif
}
#endif

unsigned FLAC__bitmath_silog2(int v);
unsigned FLAC__bitmath_silog2_wide(FLAC__int64 v);

#endif