#include "mbed.h"
#include "Hexi_KW40Z.h"
#include "Hexi_OLED_SSD1351.h"
#include "OLED_types.h"
#include "OpenSans_Font.h"
#include "string.h"
#include "FXAS21002.h"
#include "FXOS8700.h"

#define LED_ON      0
#define LED_OFF     1
#define DECLINATION -4.94
#define PI 3.14159


void StartHaptic(void);
void StopHaptic(void const *n);
void txTask(void);

DigitalOut redLed(LED1,1);
DigitalOut greenLed(LED2,1);
DigitalOut blueLed(LED3,1);
DigitalOut haptic(PTB9);


Serial pc(USBTX, USBRX);
/* Define timer for haptic feedback */
RtosTimer hapticTimer(StopHaptic, osTimerOnce);

/* Instantiate the Hexi KW40Z Driver (UART TX, UART RX) */ 
KW40Z kw40z_device(PTE24, PTE25);

/* Instantiate the SSD1351 OLED Driver */ 
SSD1351 oled(PTB22,PTB21,PTC13,PTB20,PTE6, PTD15); /* (MOSI,SCLK,POWER,CS,RST,DC) */

/* Instantiate the gyro */
FXAS21002 gyro(PTC11,PTC10);
FXOS8700 accel(PTC11, PTC10);
FXOS8700 mag(PTC11, PTC10);
// Storage for the data from the sensor
float gyro_data[3];  float gyro_rms=0.0;
float accel_data[3]; float accel_rms=0.0;
float mag_data[3];   float mag_rms=0.0;
float roll,pitch,heading;
float new_roll,new_pitch,new_heading;
int del_roll,del_pitch; 
volatile bool flag=false; 
Timeout timeout;
/*Create a Thread to handle sending BLE Sensor Data */ 
Thread txThread;

 /* Text Buffer */ 
char text[20]; 

uint8_t battery = 100;
uint8_t light = 0;
uint16_t humidity = 4500;
uint16_t temperature = 2000;
uint16_t pressure = 9000;
uint16_t x = 0;
uint16_t y = 5000;
uint16_t z = 10000;

/*Get the new value of roll and pitch*/
void get_new_value(){
    gyro.acquire_gyro_data_dps(gyro_data);
    accel.acquire_accel_data_g(accel_data);
    new_roll = atan2(accel_data[2],accel_data[1]);
    new_pitch = atan2(-accel_data[0],sqrt(accel_data[1]*accel_data[1] + accel_data[2]*accel_data[2]));
    new_pitch *= 180.0 / PI;
    new_roll  *= 180.0 / PI;
    new_roll+=180;
}
/*Click the button to start it*/
void Start_Detect(){
    if(flag==true)
    return;
    flag=true;    
}
/****************************Call Back Functions*******************************/
void ButtonRight(void)
{
    StartHaptic();
    kw40z_device.ToggleAdvertisementMode();
}

void ButtonLeft(void)
{
    StartHaptic();
    kw40z_device.ToggleAdvertisementMode();
}

void PassKey(void)
{
    StartHaptic();
    strcpy((char *) text,"PAIR CODE");
    oled.TextBox((uint8_t *)text,0,25,95,18);
  
    /* Display Bond Pass Key in a 95px by 18px textbox at x=0,y=40 */
    sprintf(text,"%d", kw40z_device.GetPassKey());
    oled.TextBox((uint8_t *)text,0,40,95,18);
}

/***********************End of Call Back Functions*****************************/

/********************************Main******************************************/

int main()
{    
    /* Register callbacks to application functions */
    kw40z_device.attach_buttonLeft(&ButtonLeft);
    kw40z_device.attach_buttonRight(&ButtonRight);
    kw40z_device.attach_passkey(&PassKey);
    kw40z_device.attach_buttonUp(&Start_Detect);//Click the button to start it
    gyro.gyro_config();
    accel.accel_config();
    mag.mag_config();
    /* Turn on the backlight of the OLED Display */
    oled.DimScreenON();
    
    /* Fills the screen with solid black */         
    oled.FillScreen(COLOR_BLACK);

    /* Get OLED Class Default Text Properties */
    oled_text_properties_t textProperties = {0};
    oled.GetTextProperties(&textProperties);    
        
    /* Change font color to Blue */ 
    textProperties.fontColor   = COLOR_BLUE;
    oled.SetTextProperties(&textProperties);
    
    /* Display Bluetooth Label at x=17,y=65 */ 
    strcpy((char *) text,"BLUETOOTH");
    oled.Label((uint8_t *)text,17,65);
    
    /* Change font color to white */ 
    textProperties.fontColor   = COLOR_WHITE;
    textProperties.alignParam = OLED_TEXT_ALIGN_CENTER;
    oled.SetTextProperties(&textProperties);
    
    /* Display Label at x=22,y=80 */ 
    strcpy((char *) text,"Tap Below");
    oled.Label((uint8_t *)text,22,80);
         
    uint8_t prevLinkState = 0; 
    uint8_t currLinkState = 0;
     
    txThread.start(txTask); /*Start transmitting Sensor Tag Data */
    
    while (true) 
    {
        blueLed = !kw40z_device.GetAdvertisementMode(); /*Indicate BLE Advertisment Mode*/   
        Thread::wait(50);
    }
}

/******************************End of Main*************************************/


/* txTask() transmits the sensor data */
void txTask(void){
   
   while (true) 
   {
        
        if(flag){
            kw40z_device.SendSetApplicationMode(GUI_CURRENT_APP_SENSOR_TAG);
            gyro.acquire_gyro_data_dps(gyro_data);
            accel.acquire_accel_data_g(accel_data);
            roll = atan2(accel_data[2],accel_data[1]);
            pitch = atan2(-accel_data[0],sqrt(accel_data[1]*accel_data[1] + accel_data[2]*accel_data[2]));
            pitch *= 180.0 / PI;
            roll  *= 180.0 / PI;
            roll+=180;
            
            Thread::wait(1000);        
            get_new_value();
            float cmd; 
            
            if(abs(new_roll-roll)>abs(new_pitch-pitch)){
                if(new_roll-roll>30)
                    cmd=100;
                else if(new_roll-roll<-30)
                    cmd=200;
                else 
                    cmd=0;   
            }else if(abs(new_roll-roll)<abs(new_pitch-pitch)){
                if(new_pitch-pitch>10)
                    cmd=300;
                else if(new_pitch-pitch<-10)
                    cmd=400;
                else 
                    cmd=0;
            }else   
                    cmd=0;
            pc.printf("cmd=%f",cmd);
            kw40z_device.SendTemperature(cmd);
            Thread::wait(6000);//Make some delay to wait the data upload to the server
            kw40z_device.SendTemperature(0);//send 0 to the server
            flag=false;
        }
        
        Thread::wait(500);                 
    }
}

void StartHaptic(void)  {
    hapticTimer.start(50);
    haptic = 1;
}

void StopHaptic(void const *n) {
    haptic = 0;
    hapticTimer.stop();
}

 #include "mbed.h" 
 #include "VS1002.h"
  
 using namespace mbed;
   
/*For Change Task*/

 #define MUSIC_PLAYER 's'
 #define LED 'l'
 #define MOTOR 'm'
volatile char task=MUSIC_PLAYER;
/*Serial COM port*/
Serial pc1(USBTX, USBRX);
Serial taskport(p28,p27); 

/*For Music Control*/  
VS1002 mp3(p5, p6, p7, p8,"sd",p11, p12 ,p13, p14, p18, p19, p20, p15);  
char *song_name[6]={"Escape","Summer of 69","Monster", "Leave out all the rest","Kings","Interstellar Docking"}; //Array of song names entered manually
int new_song_number=1;  //Variable to store the Song Number
int volume_set=-5;     //Variable to store the Volume
int previous_volume;    //Variable to store the volume when muted
bool pause=false;       //Variable to store the status of Pause button 
bool mute=false;        //Variable to store the status of mute button
 #define NEXT 7
 #define PREVIOUS 8
 #define PP 9
 #define V_DOWN 10
 #define V_UP 11
 #define MUTE_UNMUTE 12

/*For LED Control*/
PwmOut red(p24);
PwmOut green(p23);
PwmOut blue(p22);
/*For Motor Control*/
PwmOut fanSwitch(p21);
/*For Debugging*/
 DigitalOut led1(LED1);
 DigitalOut led2(LED2);

/*For Change Task*/
  void changeTask()
  {
      if(taskport.readable()){
          char c=taskport.getc();
          pc1.putc(c);
          task=c;
          }
      }
/*For Do Different Function*/
  void changeAction(){
  if(pc1.readable()){
  const char arg0=pc1.getc();
  if(task==LED){
     switch(arg0)
    {
        case '1':
                    {
                        red = 1.0;
                        green = 1.0;
                        blue = 1.0;
                    }
                    break;
        case '2':
                    {
                        red = 0.75;
                        green = 0.75;
                        blue = 0.75;
                    }
                    break;    
        case '3':
                    {
                        red = 0.5;
                        green = 0.5;
                        blue = 0.5;
                    }
                    break; 
        case '4':
                    {
                        red = 0.25;
                        green = 0.25;
                        blue = 0.25;
                    }
                    break;  

        default :
                    break;                                                
    }
    led1=!led1;
  }else if(task==MOTOR){
     switch(arg0)
    {
        case '1':
                    {
                        fanSwitch = 1.0; //Full Speed
                    }
                    break;
        case '2':
                    {
                        fanSwitch = 0.3; // Medium Speed
                    }
                    break;    
        case '3':
                    {
                        fanSwitch = 0; // Low Speed
                    }
                    break; 
        
          
        default :
                    break;                                                
    }
    led2=!led2;
  }else if(task==MUSIC_PLAYER)
  {
  int key_code=0;
    switch(arg0){
    case '1': key_code=V_UP; break;
    case '2': key_code=V_DOWN; break;
    case '3': key_code=PP; break;
    case '4': key_code=NEXT; break;
    case '5': key_code=PREVIOUS; break;
    case '6': key_code=MUTE_UNMUTE; break;   
    default : key_code=0; break; 
    }
    

 switch(key_code)  // Different cases depending on key press
 { 
  case NEXT:
            pc1.printf("next\r\n");
            new_song_number+=1;  // Next song
          if(new_song_number==7)
           new_song_number=1;
          break;
  case PREVIOUS: 
            pc1.printf("previous\r\n");
            new_song_number-=1;  // Previous Song
          if(new_song_number==0)
           new_song_number=6;
          break;
  case PP: 
            pc1.printf("pp\r\n");
            pause=!pause; // Pause/Play button
          break;
  case V_UP: 
            pc1.printf("v_up\r\n");
            volume_set+=10; // Volume Up
           if(volume_set>=0)
            volume_set=0;
           break;
  case V_DOWN: 
            pc1.printf("v_down\r\n");
            volume_set-=10;  //Volume Down
           if(volume_set<-55)
            volume_set=-55;
            break;
  case MUTE_UNMUTE: 
            pc1.printf("mute_unmute\r\n");
            mute=!mute;  //Mute/Unmute
           if(mute)
           {
            previous_volume=volume_set; // Attenuation of -55 db is small enough to not hear anything
            volume_set=-55;
           }
           else
           {
           volume_set=previous_volume;
           }
           break;
  default: ;//pc.cls();
           pc1.printf("error");  // exit on error
           exit(1);
        }
 
 /* Print to LCD the status of Song */
  //pc.cls();
  if(pause)
    pc1.printf("Paused ");
  if(mute)
   pc1.printf("Muted");
  if(!mute && !pause)
   pc1.printf("Playing"); 
  pc1.printf("\r\n %d %s",new_song_number,song_name[new_song_number-1]);   
  }
  }
}
 int main () 
 { 
    led1=1;
    led2=1;
    pc1.printf("hello\r\n");      
    
     mp3._RST = 1; 
     mp3.cs_high();                                  //chip disabled 
     mp3.sci_initialise();                           //initialise MBED 
     mp3.sci_write(0x00,(SM_SDINEW+SM_STREAM+SM_DIFF)); 
     mp3.sci_write(0x03, 0x9800); 
     mp3.sdi_initialise();    
      
    pc1.attach(&changeAction, Serial::RxIrq);//Serial interrupt for function code
    taskport.attach(&changeTask, Serial::RxIrq);// Serial interrupt for Task code
         while(1)
         {
         mp3.play_song(new_song_number);
         }       
 
 } 
 
          

using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading;
using System.Threading.Tasks;
using System.Net;
using System.Net.Http;
using System.IO.Ports;
namespace final
{
    class Program
    {
       
       
        static void Main(string[] args)
        {
            SerialPort port = new SerialPort("COM33",9600, Parity.None, 8, StopBits.One);
            if (!port.IsOpen)
                port.Open();
            char[] temp_value,value;
            temp_value = new char[1];
            value = new char[1];
            temp_value[0] = ' ';
            value[0] = ' ';
            while (true)
            {
              
                string url = "https://api.wolksense.com/api/v4/points";
                var wb = new WebClient();
                wb.Headers[HttpRequestHeader.ContentType] = "application/json";
                wb.Headers[HttpRequestHeader.Authorization] = "re6m846kr42glcvvvfe67psjskrgtocperd382f1e66qapggjinph3st99j52pch";
                var response = wb.DownloadString(url);
                string s = response;
                int startIndex = s.IndexOf("\"readingType\":\"T\"");
                int length = 35;
                s = s.Substring(startIndex, length);
                temp_value[0] = value[0];
                value[0] = s[s.Length - 1];
                if (temp_value[0] != value[0])
                {
                    string output = new string(value);
                    port.Write(output);
                    System.Console.WriteLine(s);
                    System.Console.WriteLine(value);
                }
                Thread.Sleep(1000);
            }
        }
    }
}

from flask import Flask, render_template, request, url_for, jsonify,current_app
app = Flask(__name__)
import serial


@app.route('/')
def hello_world():
    return 'Hello, Worlds!'


@app.route('/', methods=['GET', 'POST'])
def check():
    if request.method == 'POST':
        print request.data
        serdev = '/dev/tty.usbserial-AI03QVUR'
        s = serial.Serial(serdev)
        s.write(request.data)
        s.close()

	return current_app.send_static_file('index.html')

    else:
	return 'Good,bye'