ROHM-Open-Developers
This is WlanBP3595 library for STA mode. This library only works with GR-PEACH. We performed the operation check on GR-PEACH E version. Please refer to LICENSE.txt about license of this library.
Fork of
WlanBP3595STA
by 
Rohm
WlanBP3595.h
- Committer:
- tousaki
- Date:
- 2015-12-25
- Revision:
- 0:d6fcd1e2aebd
File content as of revision 0:d6fcd1e2aebd:
/****************************************************************************/
/* Copyright (c) 2015 GRAPE SYSTEMS INC. */
/* */
/* Licensed under the Apache License, Version 2.0 (the "License"); */
/* you may not use this file except in compliance with the License. */
/* You may obtain a copy of the License at */
/* */
/* http://www.apache.org/licenses/LICENSE-2.0 */
/* */
/* Unless required by applicable law or agreed to in writing, software */
/* distributed under the License is distributed on an "AS IS" BASIS, */
/* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. */
/* See the License for the specific language governing permissions and */
/* limitations under the License. */
/* */
/* [Additional license terms] */
/* */
/* This library is free for non-commercial purposes. */
/* To use this commercially, contact us at */
/* */
/* sales@info.grape.co.jp */
/* */
/****************************************************************************/
/** @file
*
* WlanBP3595 library.
* This library only works with GR-PEACH.
*
* @note
* Please refer to ROHM's "Software Development Specs" for the information of WID.
*/
#ifndef _WLANBP3595_H_
#define _WLANBP3595_H_
#include "rza1_bp3595_emac.h"
#include "lwip/opt.h"
#include "lwip/pbuf.h"
#ifdef __cplusplus
extern "C" {
#endif
/**** CONSTANT DEFINES **************************************************************************/
/** @name Status of WlanBP3595
*
*/
/*@{*/
#define WLAN_BP3595_NONE 0 /*!< BP3595 is not connected, or the firmware is not downloaded */
#define WLAN_BP3595_FW_DL 1 /*!< The firmware is being downloaded */
#define WLAN_BP3595_START 2 /*!< The firmware was downloaded and is working */
/*@}*/
/**** FUNCTION PROTOTYPE & MACRO FUNCTION ******************************************************/
/** Initialize WlanBP3595
*
* @note
* After executing this function, please wait until the state becomes WLAN_BP3595_START.
* You can get the status by WlanBP3595_GetWlanSts().
*
* @param pfnWlanInfoNotication The information callback function
* - 1st param : The message type ('I' or 'N')
* - 2nd param : WID number
* - 3rd param : The data size
* - 4th param : The data buffer
* @retval 0 Success
* @retval "The others" Failure
*/
int WlanBP3595_Init(void (*pfnWlanInfoNotication)(uint8_t, uint16_t, uint16_t, uint8_t *));
/** Get the status of WlanBP3595
*
* @retval WLAN_BP3595_NONE BP3595 is not connected, or the firmware is not downloaded
* @retval WLAN_BP3595_FW_DL The firmware is being downloaded
* @retval WLAN_BP3595_START The firmware was downloaded and is working
*/
uint32_t WlanBP3595_GetWlanSts(void);
/** Execute WID function
*
* @param ulFunc A function number
* @param pvParam The data buffer (the parameter)
* @retval 0 Success
* @retval "The others" Failure
*/
int WlanBP3595_Ioctl(uint32_t ulFunc, void *pvParam);
/** Output an ethernet frame
*
* @note
* This function is used in EthernetInterface driver.
*
* @param p A pbuf to output
* @retval 0 Success
* @retval "The others" Failure
*/
int WlanBP3595_Output(struct pbuf *p);
/** Enable receiving
*
* @note
* This function is used in EthernetInterface driver.
*/
void WlanBP3595_RecvEnable(void);
/** Disable receiving
*
* @note
* This function is used in EthernetInterface driver.
*/
void WlanBP3595_RecvDisable(void);
/** @name Macro Function
*
*/
/*@{*/
/** Notify the EthernetInterface driver that WLAN was connected
*
* When WLAN was connected,
* please call this macro function from your application program.
* The types of the argument and the return value are "void".
* You can know the change of the connection state by the information callback.
*
* @note
* When this function is called before executing EthernetInterface::init(), this function does nothing.
* If you use WlanBP3595_Disconnected() in a different thread, please perform exclusive control.
*/
#define WlanBP3595_Connected() rza1_bp3595_connected()
/** Notify the EthernetInterface driver that WLAN was disconnected
*
* When WLAN was disconnected,
* please call this macro function from your application program.
* The types of the argument and the return value are "void".
* You can know the change of the connection state by the information callback.
*
* @note
* When this function is called before executing EthernetInterface::init(), this function does nothing.
* If you use WlanBP3595_Connected() in a different thread, please perform exclusive control.
*/
#define WlanBP3595_Disconnected() rza1_bp3595_disconnected()
/*@}*/
/**** TYPE DEFINES ******************************************************************************/
typedef unsigned int grp_ui;
typedef signed int grp_si;
typedef unsigned long grp_u32;
typedef signed long grp_s32;
typedef unsigned short grp_u16;
typedef signed short grp_s16;
typedef unsigned char grp_u8;
typedef signed char grp_s8;
/**** SIZE DEFINES ******************************************************************************/
#define GRP_WLD_SSID_SIZE 32
#define GRP_WLD_BSSID_SIZE 6
#define GRP_WLD_MAC_ADDRESS_SIZE 6
#define GRP_WLD_WEP_KEY_SIZE_128 13
/**** IOCTL FUNCTION PARAMETER DEFINES **********************************************************/
#define GRP_WLD_IOCTL_SITE_SURVEY_RESULT_MAX 8
/**** IOCTL FUNCTION BASE NUMBER DEFINES ********************************************************/
#define GRP_WLD_IOCTL_FUNCTION_KIND_MASK 0xc000
#define GRP_WLD_IOCTL_GET_FUNCTION 0x8000
#define GRP_WLD_IOCTL_SET_FUNCTION 0x4000
/**** IOCTL FUNCTION NUMBER DEFINES *************************************************************/
/** @name Function code
*
*/
/*@{*/
#define GRP_WLD_IOCTL_GET_BSS_TYPE GRP_WLD_IOCTL_GET_FUNCTION + 0x0001 /*!< The function code of WID_BSS_TYPE for getting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_SET_BSS_TYPE GRP_WLD_IOCTL_SET_FUNCTION + 0x0001 /*!< The function code of WID_BSS_TYPE for setting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_GET_CHANNEL GRP_WLD_IOCTL_GET_FUNCTION + 0x0002 /*!< The function code of WID_CURRENT_CHANNEL for getting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_SET_CHANNEL GRP_WLD_IOCTL_SET_FUNCTION + 0x0002 /*!< The function code of WID_CURRENT_CHANNEL for setting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_GET_ENABLE_CHANNEL GRP_WLD_IOCTL_GET_FUNCTION + 0x0003 /*!< The function code of WID_ENABLE_CHANNEL for getting. The parameter type is "grp_u32". */
#define GRP_WLD_IOCTL_SET_ENABLE_CHANNEL GRP_WLD_IOCTL_SET_FUNCTION + 0x0003 /*!< The function code of WID_ENABLE_CHANNEL for setting. The parameter type is "grp_u32". */
#define GRP_WLD_IOCTL_GET_11I_MODE GRP_WLD_IOCTL_GET_FUNCTION + 0x0004 /*!< The function code of WID_11I_MODE for getting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_SET_11I_MODE GRP_WLD_IOCTL_SET_FUNCTION + 0x0004 /*!< The function code of WID_11I_MODE for setting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_GET_11I_PSK GRP_WLD_IOCTL_GET_FUNCTION + 0x0005 /*!< The function code of WID_11I_PSK for getting. The parameter type is "grp_wld_byte_array". */
#define GRP_WLD_IOCTL_SET_11I_PSK GRP_WLD_IOCTL_SET_FUNCTION + 0x0005 /*!< The function code of WID_11I_PSK for setting. The parameter type is "grp_wld_byte_array". */
#define GRP_WLD_IOCTL_GET_SCAN_FILTER GRP_WLD_IOCTL_GET_FUNCTION + 0x0006 /*!< The function code of WID_SCAN_FILTER for getting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_SET_SCAN_FILTER GRP_WLD_IOCTL_SET_FUNCTION + 0x0006 /*!< The function code of WID_SCAN_FILTER for setting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_GET_RSSI GRP_WLD_IOCTL_GET_FUNCTION + 0x000f /*!< The function code of WID_RSSI for getting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_GET_POWER_MANAGEMENT GRP_WLD_IOCTL_GET_FUNCTION + 0x0010
#define GRP_WLD_IOCTL_SET_POWER_MANAGEMENT GRP_WLD_IOCTL_SET_FUNCTION + 0x0010
#define GRP_WLD_IOCTL_GET_POWER_SAVE GRP_WLD_IOCTL_GET_FUNCTION + 0x0011
#define GRP_WLD_IOCTL_SET_POWER_SAVE GRP_WLD_IOCTL_SET_FUNCTION + 0x0011
#define GRP_WLD_IOCTL_GET_MAC_STATUS GRP_WLD_IOCTL_GET_FUNCTION + 0x0012 /*!< The function code of WID_CURRENT_MAC_STATUS for getting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_GET_SSID GRP_WLD_IOCTL_GET_FUNCTION + 0x0013 /*!< The function code of WID_SSID for getting. The parameter type is "grp_wld_byte_array". */
#define GRP_WLD_IOCTL_SET_SSID GRP_WLD_IOCTL_SET_FUNCTION + 0x0013 /*!< The function code of WID_SSID for setting. The parameter type is "grp_wld_byte_array". */
#define GRP_WLD_IOCTL_GET_BCAST_SSID GRP_WLD_IOCTL_GET_FUNCTION + 0x0014 /*!< The function code of WID_BCAST_SSID for getting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_SET_BCAST_SSID GRP_WLD_IOCTL_SET_FUNCTION + 0x0014 /*!< The function code of WID_BCAST_SSID for setting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_GET_BSSID GRP_WLD_IOCTL_GET_FUNCTION + 0x0015 /*!< The function code of WID_BSSID for getting. The parameter type is "grp_wld_byte_array". */
#define GRP_WLD_IOCTL_GET_WEP_KEY GRP_WLD_IOCTL_GET_FUNCTION + 0x0016 /*!< The function code of WID_WEP_KEY_VALUE for getting. The parameter type is "grp_wld_byte_array". */
#define GRP_WLD_IOCTL_SET_WEP_KEY GRP_WLD_IOCTL_SET_FUNCTION + 0x0016 /*!< The function code of WID_WEP_KEY_VALUE for setting. The parameter type is "grp_wld_byte_array". */
#define GRP_WLD_IOCTL_GET_WEP_KEY_INDEX GRP_WLD_IOCTL_GET_FUNCTION + 0x0017 /*!< The function code of WID_KEY_ID for getting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_SET_WEP_KEY_INDEX GRP_WLD_IOCTL_SET_FUNCTION + 0x0017 /*!< The function code of WID_KEY_ID for setting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_GET_LISTEN_INTERVAL GRP_WLD_IOCTL_GET_FUNCTION + 0x0019 /*!< The function code of WID_LISTEN_INTERVAL for getting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_SET_LISTEN_INTERVAL GRP_WLD_IOCTL_SET_FUNCTION + 0x0019 /*!< The function code of WID_LISTEN_INTERVAL for setting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_GET_SITE_SURVEY_RESULT GRP_WLD_IOCTL_GET_FUNCTION + 0x001a /*!< The function code of WID_SITE_SURVEY_RESULTS for getting. The parameter type is "grp_wld_site_survey_result_array". */
#define GRP_WLD_IOCTL_GET_DEVICE_STRINGS GRP_WLD_IOCTL_GET_FUNCTION + 0x001b /*!< The function code of WID_FIRMWARE_VERSION & WID_SERIAL_NUMBER for getting. The parameter type is "grp_wld_dev_strings". */
#define GRP_WLD_IOCTL_GET_MAC_ADDRESS GRP_WLD_IOCTL_GET_FUNCTION + 0x001c /*!< The function code of WID_MAC_ADDR for getting. The parameter type is "grp_wld_byte_array". */
#define GRP_WLD_IOCTL_GET_SCAN_TYPE GRP_WLD_IOCTL_GET_FUNCTION + 0x0022 /*!< The function code of WID_SCAN_TYPE for getting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_SET_SCAN_TYPE GRP_WLD_IOCTL_SET_FUNCTION + 0x0022 /*!< The function code of WID_SCAN_TYPE for setting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_GET_AUTH_TYPE GRP_WLD_IOCTL_GET_FUNCTION + 0x0026 /*!< The function code of WID_AUTH_TYPE for getting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_SET_AUTH_TYPE GRP_WLD_IOCTL_SET_FUNCTION + 0x0026 /*!< The function code of WID_AUTH_TYPE for setting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_GET_SEL_ANTENNA GRP_WLD_IOCTL_GET_FUNCTION + 0x0030 /*!< The function code of WID_ANTENNA_SELECTION for getting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_SET_SEL_ANTENNA GRP_WLD_IOCTL_SET_FUNCTION + 0x0030 /*!< The function code of WID_ANTENNA_SELECTION for setting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_GET_WPS_START GRP_WLD_IOCTL_GET_FUNCTION + 0x0035 /*!< The function code of WID_WPS_START for getting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_SET_WPS_START GRP_WLD_IOCTL_SET_FUNCTION + 0x0035 /*!< The function code of WID_WPS_START for setting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_GET_WPS_DEV_MODE GRP_WLD_IOCTL_GET_FUNCTION + 0x0036 /*!< The function code of WID_WPS_DEV_MODE for getting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_SET_WPS_DEV_MODE GRP_WLD_IOCTL_SET_FUNCTION + 0x0036 /*!< The function code of WID_WPS_DEV_MODE for setting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_GET_BEACON_INTERVAL GRP_WLD_IOCTL_GET_FUNCTION + 0x004a /*!< The function code of WID_BEACON_INTERVAL for getting. The parameter type is "grp_u16". */
#define GRP_WLD_IOCTL_SET_BEACON_INTERVAL GRP_WLD_IOCTL_SET_FUNCTION + 0x004a /*!< The function code of WID_BEACON_INTERVAL for setting. The parameter type is "grp_u16". */
#define GRP_WLD_IOCTL_GET_WPS_PIN GRP_WLD_IOCTL_GET_FUNCTION + 0x0064 /*!< The function code of WID_WPS_PIN for getting. The parameter type is "grp_wld_byte_array". */
#define GRP_WLD_IOCTL_SET_WPS_PIN GRP_WLD_IOCTL_SET_FUNCTION + 0x0064 /*!< The function code of WID_WPS_PIN for setting. The parameter type is "grp_wld_byte_array". */
#define GRP_WLD_IOCTL_GET_WPS_CRED_LIST GRP_WLD_IOCTL_GET_FUNCTION + 0x006a /*!< The function code of WID_WPS_CRED_LIST for getting. The parameter type is "grp_wld_wps_cred_list". */
#define GRP_WLD_IOCTL_SET_WPS_CRED_LIST GRP_WLD_IOCTL_SET_FUNCTION + 0x006a /*!< The function code of WID_WPS_CRED_LIST for setting. The parameter type is "grp_wld_wps_cred_list". */
#define GRP_WLD_IOCTL_GET_USB_IN_XFER_MODE GRP_WLD_IOCTL_GET_FUNCTION + 0x006b /*!< The function code of WID_USB_IN_XFER_MODE for getting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_SET_USB_IN_XFER_MODE GRP_WLD_IOCTL_SET_FUNCTION + 0x006b /*!< The function code of WID_USB_IN_XFER_MODE for setting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_GET_TX_POWER_RATE GRP_WLD_IOCTL_GET_FUNCTION + 0x006c /*!< The function code of WID_TX_POWER_RATE for getting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_SET_TX_POWER_RATE GRP_WLD_IOCTL_SET_FUNCTION + 0x006c /*!< The function code of WID_TX_POWER_RATE for setting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_GET_VSIE_FRAME GRP_WLD_IOCTL_GET_FUNCTION + 0x006d /*!< The function code of WID_VSIE_FRAME for getting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_SET_VSIE_FRAME GRP_WLD_IOCTL_SET_FUNCTION + 0x006d /*!< The function code of WID_VSIE_FRAME for setting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_GET_VSIE_INFO_ENABLE GRP_WLD_IOCTL_GET_FUNCTION + 0x006e /*!< The function code of WID_VSIE_INFO_ENABLE for getting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_SET_VSIE_INFO_ENABLE GRP_WLD_IOCTL_SET_FUNCTION + 0x006e /*!< The function code of WID_VSIE_INFO_ENABLE for setting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_GET_VSIE_RX_OUI GRP_WLD_IOCTL_GET_FUNCTION + 0x006f /*!< The function code of WID_VSIE_RX_OUI for getting. The parameter type is "grp_u32". */
#define GRP_WLD_IOCTL_SET_VSIE_RX_OUI GRP_WLD_IOCTL_SET_FUNCTION + 0x006f /*!< The function code of WID_VSIE_RX_OUI for setting. The parameter type is "grp_u32". */
#define GRP_WLD_IOCTL_GET_VSIE_TX_DATA GRP_WLD_IOCTL_GET_FUNCTION + 0x0070 /*!< The function code of WID_VSIE_TX_DATA for getting. The parameter type is "grp_wld_byte_array". */
#define GRP_WLD_IOCTL_SET_VSIE_TX_DATA GRP_WLD_IOCTL_SET_FUNCTION + 0x0070 /*!< The function code of WID_VSIE_TX_DATA for setting. The parameter type is "grp_wld_byte_array". */
#define GRP_WLD_IOCTL_GET_VSIE_RX_DATA GRP_WLD_IOCTL_GET_FUNCTION + 0x0071 /*!< The function code of WID_VSIE_RX_DATA for getting. The parameter type is "grp_wld_byte_array". */
#define GRP_WLD_IOCTL_GET_DTIM_PERIOD GRP_WLD_IOCTL_GET_FUNCTION + 0x0072 /*!< The function code of WID_DTIM_PERIOD for getting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_SET_DTIM_PERIOD GRP_WLD_IOCTL_SET_FUNCTION + 0x0072 /*!< The function code of WID_DTIM_PERIOD for setting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_SET_DISCONNECT GRP_WLD_IOCTL_SET_FUNCTION + 0x0073 /*!< The function code of WID_DISCONNECT for setting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_GET_REKEY_PERIOD GRP_WLD_IOCTL_GET_FUNCTION + 0x0074 /*!< The function code of WID_REKEY_PERIOD for getting. The parameter type is "grp_u32". */
#define GRP_WLD_IOCTL_SET_REKEY_PERIOD GRP_WLD_IOCTL_SET_FUNCTION + 0x0074 /*!< The function code of WID_REKEY_PERIOD for setting. The parameter type is "grp_u32". */
#define GRP_WLD_IOCTL_GET_WPS_PASS_ID GRP_WLD_IOCTL_GET_FUNCTION + 0x0075 /*!< The function code of WID_WPS_PASS_ID for getting. The parameter type is "grp_u16". */
#define GRP_WLD_IOCTL_SET_WPS_PASS_ID GRP_WLD_IOCTL_SET_FUNCTION + 0x0075 /*!< The function code of WID_WPS_PASS_ID for setting. The parameter type is "grp_u16". */
#define GRP_WLD_IOCTL_GET_REKEY_POLICY GRP_WLD_IOCTL_GET_FUNCTION + 0x0076 /*!< The function code of WID_REKEY_POLICY for getting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_SET_REKEY_POLICY GRP_WLD_IOCTL_SET_FUNCTION + 0x0076 /*!< The function code of WID_REKEY_POLICY for setting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_GET_CONNECTED_STA_LIST GRP_WLD_IOCTL_GET_FUNCTION + 0x0077 /*!< The function code of WID_CONNECTED_STA_LIST for getting. The parameter type is "grp_wld_connected_sta_list_info". */
#define GRP_WLD_IOCTL_SET_JOIN_REQUEST GRP_WLD_IOCTL_SET_FUNCTION + 0x0902 /*!< The function code of WID_JOIN_REQ for setting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_SET_START_SCAN_REQ GRP_WLD_IOCTL_SET_FUNCTION + 0x0905 /*!< The function code of WID_START_SCAN_REQ for setting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_GET_CHECK_SCAN_END GRP_WLD_IOCTL_GET_FUNCTION + 0x0906 /*!< The function code of WID_START_SCAN_REQ for getting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_GET_SITE_SURVEY GRP_WLD_IOCTL_GET_FUNCTION + 0x0907 /*!< The function code of WID_SITE_SURVEY for getting. The parameter type is "grp_u8". */
#define GRP_WLD_IOCTL_SET_SITE_SURVEY GRP_WLD_IOCTL_SET_FUNCTION + 0x0907 /*!< The function code of WID_SITE_SURVEY for setting. The parameter type is "grp_u8". */
/*@}*/
/**** STRUCTURE DEFINES *************************************************************************/
/** Byte array structure
*
*/
typedef struct GRP_WLD_BYTE_ARRAY_T { /* Byte array structure */
grp_u32 ulSize; /*!< Array size */
grp_u8 *pucData; /*!< Byte array buffer pointer */
} grp_wld_byte_array;
/** Device strings structure
*
*/
typedef struct GRP_WLD_DEV_STRINGS_T { /* Device strings structure */
grp_u32 ulFirmwareVersionSize; /*!< buffer size */
grp_u8 *pucFirmwareVersionBuf; /*!< buffer pointer */
grp_u32 ulSerialNumberSize; /*!< buffer size */
grp_u8 *pucSerialNumberBuf; /*!< buffer pointer */
} grp_wld_dev_strings;
/** Site survey result structure
*
*/
typedef struct GRP_WLD_SITE_SURVEY_RESULT_T { /* Site survey result structure */
grp_u8 aucSsid[GRP_WLD_SSID_SIZE + 1]; /*!< SSID */
grp_u8 ucBssType; /*!< BSS type */
grp_u8 ucChannel; /*!< Channel */
grp_u8 ucSecurity; /*!< Security */
grp_u8 aucBssid[GRP_WLD_BSSID_SIZE]; /*!< BSSID */
grp_u8 ucRxPower; /*!< Rx power */
} grp_wld_site_survey_result;
/** Site survey result array structure
*
*/
typedef struct GRP_WLD_SITE_SURVEY_RESULT_ARRAY_T { /* Site survey result array structure */
grp_si iCnt; /*!< Valid data count */
grp_wld_site_survey_result atResult[GRP_WLD_IOCTL_SITE_SURVEY_RESULT_MAX]; /*!< result */
} grp_wld_site_survey_result_array;
/** WPS cred list structure
*
*/
typedef struct GRP_WLD_WPS_CRED_T { /* WPS cred list structure */
grp_u8 aucSSID[GRP_WLD_SSID_SIZE+1]; /*!< SSID */
grp_u8 ucAuthType; /*!< auth type */
grp_u8 uc11imode; /*!< 11i mode */
grp_u8 ucWEPKeyId; /*!< WEP key ID */
grp_u8 aucWEPKey[GRP_WLD_WEP_KEY_SIZE_128+1]; /*!< WEP key value */
grp_u8 ucWEPKeyLen; /*!< WEP key length */
grp_u8 aucPSK[64+1]; /*!< PSK */
grp_u8 ucPSKLen; /*!< PSK Length */
grp_u8 aucBSSID[GRP_WLD_BSSID_SIZE]; /*!< BSSID */
} grp_wld_wps_cred;
/** WPS cred list structure
*
*/
typedef struct GRP_WLD_WPS_CRED_LIST_T { /* WPS cred list structure */
grp_si iNum; /*!< Cred info number */
grp_wld_wps_cred *ptCredBuf; /*!< Cred info buffer */
} grp_wld_wps_cred_list;
/** STA join information
*
*/
typedef struct GRP_WLD_STA_JOIN_INFO_T { /* STA join information */
grp_u8 ucAID; /*!< Association ID lower 8bit */
grp_u8 ucSTAType; /*!< STA type */
grp_u8 uc11gInfo; /*!< 11g information */
grp_u8 ucSecInfo; /*!< Security information */
grp_u16 usWMMInfo; /*!< WMM information */
grp_u16 us11nInfo; /*!< 11N information */
grp_u8 aucMacAddress[GRP_WLD_MAC_ADDRESS_SIZE];
/*!< MAC address */
} grp_wld_sta_join_info;
/** Connected Sta list information
*
*/
typedef struct GRP_WLD_CONNECTED_STA_LIST_INFO_T { /* Connected Sta list information */
grp_si iNum; /*!< Connected sta info number */
grp_wld_sta_join_info *ptCnctStaBuf; /*!< Connected sta info buffer */
} grp_wld_connected_sta_list_info;
#ifdef __cplusplus
}
#endif
#endif /* _WLANBP3595_H_ */