Revision 0:384ce9819ea6, committed 2017-05-11

Comitter:

pixus_mbed

Date:

Thu May 11 17:32:14 2017 +0000

Child:

1:66afdef90518

Commit message:

PMT9123 OTS on Nucleo (Initial Release)

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Pixart_OTS.lib	Thu May 11 17:32:14 2017 +0000
@@ -0,0 +1,1 @@
+Pixart_OTS#7aefc9ab3301

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Thu May 11 17:32:14 2017 +0000
@@ -0,0 +1,270 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "mbed.h"
+#include "OTC.h"
+#include <string>
+#include <ctype.h>
+using namespace std;
+
+// Function prototypes
+void serialEvent();
+void serialProcess(string input);
+bool IsParamValid(char *param, bool hex = true);
+bool IsDigit(char *p, bool hex);
+void Hex8(uint8_t data);
+void PrintHex8(uint8_t data);
+
+Serial pc(USBTX,USBRX);//tx, rx
+I2C i2c(I2C_SDA, I2C_SCL);
+
+DigitalOut led1(LED1);
+DigitalOut pwm(D9);
+PwmOut mypwm(D9);
+
+// OTS object declaration
+Pixart_OTS *m_OTS = NULL;
+
+// Serial string
+string strRead = "";
+
+// LED PWM setting
+#define LED_PERIOD_US  3000    // 3ms
+#define LED_MAX_DC      100
+// LED brightness control value in us
+int16_t LED_on_time_us = 0;
+int16_t Counts;
+int16_t max_on_period;
+
+// LED control
+void LED_control(int16_t value)
+{
+    int16_t led_on_time;
+    
+    LED_on_time_us += value;
+    led_on_time = LED_on_time_us;
+    
+    if (LED_on_time_us < 5)     // hysterisis so that the LED stay off
+        led_on_time = 0;
+    else if (LED_on_time_us > max_on_period)
+        led_on_time = LED_on_time_us = max_on_period;
+    
+    mypwm.pulsewidth_us(led_on_time);
+}
+
+// Reset count and LED
+void ClearCount()
+{
+   Counts = 0;
+   pc.printf("Count = 0\n");
+   LED_on_time_us = 0;
+   LED_control(0);
+}
+
+void GetData(int16_t value)
+{
+    Counts += value;
+    pc.printf("Count = %d\n", Counts);
+    
+    // Change brightness
+    LED_control(value);
+}
+
+// main() runs in its own thread in the OS
+// (note the calls to Thread::wait below for delays)
+int main() {
+
+    pc.format(8, Serial::None, 1);
+    pc.baud(115200);
+    pc.attach(&serialEvent);
+    i2c.frequency(400000);    
+    
+    // LED control 
+    max_on_period = LED_MAX_DC*LED_PERIOD_US/100;
+    mypwm.period_us(LED_PERIOD_US);
+    LED_on_time_us = 0;   // start with 0, which is off
+    LED_control(0);
+    
+    Counts = 0;     // restart count to zero
+    
+    bool Result = false;
+    // Set to polling at 4ms
+    m_OTS = new Pixart_OTS(&i2c,4,GetData,Result);
+    
+    if(Result == true)
+    {
+        pc.printf("Initial Pixart OTS successful\n\r");
+    }
+    else
+    {
+        pc.printf("Initial Pixart OTS fail\n\r");    
+    }
+        
+        
+    while (true)
+    {
+       ;
+   }
+}
+
+void serialEvent() {
+  char inChar;
+
+  while (pc.readable())
+  {
+    // get the new byte:
+    inChar = (char)pc.getc();
+    //pc.putc(inChar);
+    // if the incoming character is a newline, set a flag
+    // so the main loop can do something about it:
+    if ((inChar == '\n') || (inChar == '\r'))
+    {
+      //strRead.trim();
+      strRead += " ";  // for tokenizing
+      serialProcess(strRead);
+      strRead = "";
+    }
+    else if (inChar != 0xf0)
+      // add it to the strRead
+      strRead += inChar;
+  }
+}
+
+// Macro define for easily reading
+#define IsEqual(a,b)  (!strcmp((a),(b)))
+
+void serialProcess(string input)
+{
+  int val;
+  unsigned char Address,Value;
+
+  //pc.printf("cmd = %s\n", input);
+  // ====================================================
+  //  Single command goes here
+  //  NOTE: All command compare must have " " at the back
+  // ====================================================
+  if (input == "c ")
+  {
+    ClearCount();
+  }
+  // ====================================================
+  //  Command with parameters goes here, like r 00, w 48 00
+  // ====================================================
+  else if (input != " ")    // not empty string, then proceed to decode the command
+  {
+    char buff[40];
+    size_t l = input.copy(buff, input.length(), 0);
+    buff[l] = '\0';
+    
+    // Get the command
+    char *tok = strtok(buff, " ");
+    if (!tok)
+    {
+      pc.printf("empty command\n");
+      return;
+    }
+    
+    // Get parameters, up to 4 parameters, if more than that, individual command will need to extract it on their own
+    char *param[4];
+    for (val = 0; val < 4; val++)
+    {
+      param[val] = strtok(NULL, " ");
+      if (!param[val])  // break if we reach the end
+        break;
+    }
+
+    // convert the first parameter into decimal first, as it is most commonly used
+    val = strtol(param[0], NULL, 10);
+
+    // switch for command
+    if ((IsEqual(tok,"r")) || (IsEqual(tok,"w")))
+    {
+      // Address is the first byte
+      if (!IsParamValid(param[0]))
+      {
+        return;
+      }
+      // convert to integer
+      Address = strtol(param[0], NULL, 16);
+      if (Address > 0x7F)
+      {
+        pc.printf("Error (r/w): address > 0x7F\n");
+        return;
+      }
+      
+      if ((IsEqual(tok,"w")))
+      {
+        // Value is second byte
+        if (!IsParamValid(param[1]))
+        {
+          return;
+        }
+        // convert to integer
+        Value = strtol(param[1], NULL, 16);
+        if (Value > 0xFF)
+        {
+          pc.printf("Error (w): value > 0xFF\n");
+          return;
+        }
+        
+        val = m_OTS->Register_Write(Address, Value);
+      }
+      else
+      {
+        val = m_OTS->Register_Read(Address);
+      }
+      
+      pc.printf("ADDR %02X %02X\n", Address, val);
+    }
+    else
+    {
+      pc.printf("Bad command : ");
+      pc.printf("%s\n", tok);
+    }
+  }
+}
+
+// Check if param is not given or not hexa, print the error as well
+bool IsParamValid(char *param, bool hex)
+{
+  if (!param)
+  {
+    return false;
+  }
+  if (!IsDigit(param, hex))
+  {
+    pc.printf("Error : arg invalid\n");
+    return false;
+  }
+  return true;
+}
+
+// Check whether is hexa for given char
+bool IsDigit(char *p, bool hex)
+{
+  for (int i; i < strlen(p); i++)
+  {
+    if (hex)
+    {
+      if (!isxdigit(p[i]))
+        return false;
+    }
+    else if (!isdigit(p[i]))
+        return false;
+  }
+  return true;
+}
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Thu May 11 17:32:14 2017 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/25aea2a3f4e3
\ No newline at end of file