PixArt / Mbed OS 9125_referenceCode

Reference firmware for PixArt's PAT9125EL sensor and evaluation board. "Hello World" and "Library" contain the exact same files. Please import just one of the two into your mBed compiler as a new program and not as a library.

Welcome to the code repository for PixArt's PAT9125EL sensor and evaluation board.

For general information about this product, please visit this product's components page here:
https://os.mbed.com/components/PAT9125EL-Evaluation-Board/

For guides and tips on how to setup and evaluate the PAT9125EL sensor with the Nordic nRF52-DK microcontroller using this reference code, please visit this guide:
https://os.mbed.com/teams/PixArt/code/9125_referenceCode/wiki/Guide-for-nRF52-DK-Platform

For guides and tips on how to setup and evaluate the PAT9125EL sensor with any microcontroller using this reference code, please visit this guide:
https://os.mbed.com/teams/PixArt/code/9125_referenceCode/wiki/Guide-for-Any-Platform

commHeaders/registerArrays.h

Committer:
PixArtVY
Date:
2018-02-23
Revision:
0:e9cce1154246
Child:
3:979019410df2

File content as of revision 0:e9cce1154246:

const uint8_t initialize[][2] = {
    { 0x09, 0x5A },     //Disables write-protect.
    { 0x0D, 0xB5 },     //Sets X-axis resolution (necessary value here will depend on physical design and application).
    { 0x0E, 0xFF },     //Sets Y-axis resolution (necessary value here will depend on physical design and application).
    { 0x19, 0x04 },     //Sets 12-bit X/Y data format. 0x04 is default (neither axis inverted, using 12-bit data instead of 8-bit data).
    //{ 0x4B, 0x04 },     //Needed for when using low-voltage rail (1.7-1.9V): Power saving configuration.
};
#define initialize_size (sizeof(initialize)/sizeof(initialize[0]))