PixArt / Mbed OS 3901_referenceFirmware

Reference firmware for PixArt's PMW3901MB sensor and evaluation board. "Hello World" and "Library" contain the exact same files. Please import just one of the two into your mBed compiler as a new program and not as a library.

Welcome to the code repository for PixArt's PMW3901MB sensor and evaluation board.

For general information about this product, please visit this product's components page here:
https://os.mbed.com/components/PMW3901MB-Far-Field-Optical-Motion-Track/

For guides and tips on how to setup and evaluate the PMW3901MB sensor with the Nordic nRF52-DK microcontroller using this reference code, please visit this guide:
https://os.mbed.com/teams/PixArt/code/3901_referenceFirmware/wiki/Guide-for-nRF52-DK-Platform

For guides and tips on how to setup and evaluate the PMW3901MB sensor with any microcontroller using this reference code, please visit this guide:
https://os.mbed.com/teams/PixArt/code/3901_referenceFirmware/wiki/Guide-for-Any-Platform

Diff: main.cpp

Revision:
0:c00f2464eee3
Child:
1:10365086d44e
diff -r 000000000000 -r c00f2464eee3 main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Wed Mar 14 21:22:43 2018 +0000
@@ -0,0 +1,47 @@
+// PMW3901MB: Optical Motion Tracking Chip reference code.
+// Version: 1.0
+// Latest Revision Date: 13 Mar. 2018
+// By PixArt Imaging Inc.
+// Primary Engineer: Vincent Yeh (PixArt USA)
+
+/*
+//=======================
+//Revision History
+//=======================
+Version 1.0 -- 13 Mar. 2018
+First release.
+*/
+
+#include "mbed.h"
+#include "SPIcommFunctions.h"
+
+int main()
+{
+    pc.baud(115200);                    // Set baud rate to 115200. Remember to sync serial terminal baud rate to the same value.
+
+    spi.format(8,3);                    // Set SPI to 8 bits with inverted polarity and phase-shifted to second edge.
+    spi.frequency(1000000);             // Set frequency for SPI communication.
+    cs = 1;                             // Initialize chip select as inactive.
+    
+    pc.printf("Program START\n\r");
+    
+    pc.printf("ID Check: %2X\n\r", readRegister(0x00)); //Checks product ID to make sure communication protocol is working properly.
+    if(readRegister(0x00) != 0x49)
+    {
+        pc.printf("Communication protocol error! Terminating program.\n\r");
+        return 0;
+    }
+    
+    initializeSensor();
+    
+    while(1)
+    {
+        //pc.printf("MOTION bit: %2X\n\r", (readRegister(0x02) & 0x80) >> 7);   //Prints motion bit for debugging. 1 = motion detected. 0 = no motion detected.
+        
+        if(readRegister(0x02) & 0x80)
+        {
+            grabData();
+            printData();
+        }
+    }
+}