NuMaker PWM0 play notes (to speaker)

README.md

Committer:
shliu1
Date:
2016-12-13
Revision:
3:c7ff2d693bf4
Child:
4:cf951fa65c75

File content as of revision 3:c7ff2d693bf4:


# Getting started with NuMaker-mbed-PWM0_playnote on mbed OS
 
The code works on an mbed OS platform. It uses the thread of OS to show LED.
 
Please install [mbed CLI](https://github.com/ARMmbed/mbed-cli#installing-mbed-cli).
 
## Get the example application!

Ontain the mbed-OS library from Windows command prompt

git clone https://github.com/ARMmbed/mbed-os


From the command line of Git Bash, for example:
 
```
hg clone https://developer.mbed.org/teams/Nuvoton/code/NuMaker-mbed-PWM0_playnote/
cd NuMaker-mbed-PWM0_playnote

```

Make shortcut for mbed-os library within the folder NuMaker-mbed-PWM0_playnote
 
### Now compile
 
Invoke `mbed compile` specifying the name of your platform and your favorite toolchain (`GCC_ARM`, `ARM`, `IAR`). For example, for the ARM Compiler 5:
 
```
mbed compile -m NUMAKER_PFM_NUC472 -t ARM
```
 
Your PC may take a few minutes to compile your code. At the end you should get the following result:
 
```
+------------------------+-------+-------+---------+
| Module                 | .text | .data |    .bss |
+------------------------+-------+-------+---------+
| Misc                   | 12587 |    16 | 1051616 |
| drivers                |   444 |     4 |      28 |
| features/FEATURE_LWIP  |   162 |    16 |      16 |
| hal                    |   358 |     8 |       0 |
| platform               |  1565 |    16 |      92 |
| rtos                   |   130 |     8 |       0 |
| rtos/rtx               |  6702 |   100 |    8396 |
| targets/TARGET_NUVOTON |  8100 |   276 |     104 |
| Subtotals              | 30048 |   444 | 1060252 |
+------------------------+-------+-------+---------+
Allocated Heap: unknown
Allocated Stack: unknown
Total Static RAM memory (data + bss): 1060696 bytes
Total RAM memory (data + bss + heap + stack): 1060696 bytes
Total Flash memory (text + data + misc): 30492 bytes

```
 
### Program your board
 
1. Connect your mbed device to the computer over USB.
1. Copy the binary file to the mbed device .
1. Press the reset button to start the program.
 
Please refer to the documents at the path https://github.com/OpenNuvoton/NuMaker_NuWicam_Samples/
 
## Export the project to Keil MDK and debug your application
 
From the command line, run the following command:
 
```
mbed export -m NUMAKER_PFM_NUC472 -i uvision
```
 
To debug the application:
 
1. Start uVision.
1. Import the uVision project generated earlier.
1. Compile your application and generate an `.axf` file.
1. Make sure uVision is configured to debug over CMSIS-DAP (From the Project menu > Options for Target '...' > Debug tab > Use CMSIS-DAP Debugger).
1. Set breakpoints and start a debug session.
 
![Image of uVision](img/uvision.png)
 
## Troubleshooting
 
1. Make sure `mbed-cli` is working correctly and its version is greater than `0.8.9`
 
 ```
 mbed --version
 ```
 
 If not, you can update it easily:
 
 ```
 pip install mbed-cli --upgrade
 ```
 
2. If using Keil MDK, make sure you have a license installed. [MDK-Lite](http://www.keil.com/arm/mdk.asp) has a 32KB restriction on code size.