File content as of revision 0:dd702039127a:

#include "board.h"
#include "fsl_gpio.h"
#include "fsl_clock_config.h"
#include "emwin_support.h"

/* Initialize the LCD_DISP. */
void BOARD_InitLcd(void)
{
    volatile uint32_t i = 0x100U;

    gpio_pin_config_t config = {
        kGPIO_DigitalOutput, 0,
    };

    /* Reset the LCD. */
    GPIO_PinInit(LCD_DISP_GPIO, LCD_DISP_GPIO_PIN, &config);

    GPIO_WritePinOutput(LCD_DISP_GPIO, LCD_DISP_GPIO_PIN, 0);

    while (i--)
    {
    }

    GPIO_WritePinOutput(LCD_DISP_GPIO, LCD_DISP_GPIO_PIN, 1);

    /* Backlight. */
    config.outputLogic = 1;
    GPIO_PinInit(LCD_BL_GPIO, LCD_BL_GPIO_PIN, &config);

    /*Clock setting for LPI2C*/
    CLOCK_SetMux(kCLOCK_Lpi2cMux, LPI2C_CLOCK_SOURCE_SELECT);
    CLOCK_SetDiv(kCLOCK_Lpi2cDiv, LPI2C_CLOCK_SOURCE_DIVIDER);
}

void BOARD_InitLcdifPixelClock(void)
{
    /*
     * The desired output frame rate is 60Hz. So the pixel clock frequency is:
     * (480 + 41 + 4 + 18) * (272 + 10 + 4 + 2) * 60 = 9.2M.
     * Here set the LCDIF pixel clock to 9.3M.
     */

    /*
     * Initialize the Video PLL.
     * Video PLL output clock is OSC24M * (loopDivider + (denominator / numerator)) / postDivider = 93MHz.
     */
    clock_video_pll_config_t config = {
        .loopDivider = 31, .postDivider = 8, .numerator = 0, .denominator = 0,
    };

    CLOCK_InitVideoPll(&config);

    /*
     * 000 derive clock from PLL2
     * 001 derive clock from PLL3 PFD3
     * 010 derive clock from PLL5
     * 011 derive clock from PLL2 PFD0
     * 100 derive clock from PLL2 PFD1
     * 101 derive clock from PLL3 PFD1
     */
    CLOCK_SetMux(kCLOCK_LcdifPreMux, 2);

    CLOCK_SetDiv(kCLOCK_LcdifPreDiv, 4);

    CLOCK_SetDiv(kCLOCK_LcdifDiv, 1);
}