Example program demonstrating use of HTTP or HTTPS protocol over a cellular connection with httpbin.org using the MTSAS library. (Demonstrates GET,POST,basic-auth)
main.cpp
- Committer:
- Vanger
- Date:
- 2015-03-16
- Revision:
- 5:931abf45fb92
- Parent:
- 4:09d5f99b94b1
- Child:
- 6:e5ea200c66c3
File content as of revision 5:931abf45fb92:
#include "mbed.h" #include "mtsas.h" int main(){ //Modify to match your apn if you are using an HSPA radio with a SIM card const char APN[] = ""; //Sets the log level to INFO, higher log levels produce more log output. //Possible levels: NONE, FATAL, ERROR, WARNING, INFO, DEBUG, TRACE MTSLog::setLogLevel(MTSLog::INFO_LEVEL); //Receive buffer char rbuf[4000]; //url strings for HTTP requests, httpbin.org is a public website for fielding test HTTP requests string url, base_url = "http://httpbin.org:80", url_get = "/get"; /** STMicro Nucelo F401RE * The supported jumper configurations of the MTSAS do not line up with * the pin mapping of the Nucleo F401RE. Therefore, the MTSAS serial TX * pin (JP8 Pin 2) must be manually jumped to Serial1 RX (Shield pin D2) * and the MTSAS serial RX pin (JP9 Pin 2) pin must be manually jumped to * Serial1 TX (Shield pin D8). * Uncomment the following line to use the STMicro Nuceleo F401RE */ MTSSerialFlowControl* io = new MTSSerialFlowControl(D8, D2, D3, D6); /** Dragonfly * To configure the serial pins for the Dragonfly board, use: * RADIO_TX = pin PC_7, RADIO_RX = pin PC_6 * RADIO_RTS = pin PB_10,RADIO_CTS = pin PB_12 * Uncomment the following lines to use the Dragonfly board */ //MTSSerialFlowControl* io = new MTSSerialFlowControl(PC_7, PC_6, PB_10, PB_12); //reset_pin = NC; /** Freescale KL46Z * To configure the serial pins for the Freescale KL46Z board, use MTSAS jumper * configuration B. Uncomment the following line to use the Freescale KL46Z board */ //MTSSerialFlowControl* io = new MTSSerialFlowControl(D2, D9, D3, D6); /** Freescale K64F * To configure the serial pins for the Freescale K64F board, use MTSAS jumper * configuration A. Uncomment the following line to use the Freescale K64F board */ //MTSSerialFlowControl* io = new MTSSerialFlowControl(D1, D0, D3, D6); //Sets the baud rate for communicating with the radio io->baud(115200); //Initialize radio configurations Cellular* radio = CellularFactory::create(io); if( ! radio) { logFatal("Radio initialization failed"); return 1; } radio->configureSignals(D4,D7,RESET); Transport::setTransport(radio); //Set up HTTP interface HTTPClient* http = new HTTPClient(); HTTPText* receive = new HTTPText(rbuf, 4000); //Set radio APN for (int i = 0; i < 10; i++) { if (i >= 10) { logError("Failed to set APN to %s", APN); } if (radio->setApn(APN) == MTS_SUCCESS) { logInfo("Successfully set APN to %s", APN); break; } else { wait(1); } } //Establish PPP link for (int i = 0; i < 10; i++) { if (i >= 10) { logError("Failed to establish PPP link"); } if (radio->connect() == true) { logInfo("Successfully established PPP link"); break; } else { wait(1); } } //Format HTTP Get request url = base_url + url_get; //Send HTTP GET request for (int i = 0; i < 10; i++) { if(http->get(url.c_str(), receive, 5000) == HTTP_OK) { http->get(url.c_str(), receive, 5000); logInfo("HTTP get succeeded\n%s", rbuf); break; } if (i >= 10) { logError("HTTP GET failed"); } wait(1); } //Disconnect PPP link radio->disconnect(); logInfo("End of example code\n"); return 0; }