MultiTech / Mbed OS MTDOT-BOX-EVB-Factory-Firmware

Factory firmware for the MultiTech Dotbox (MTDOT-BOX) and EVB (MTDOT-EVB) products.

Dependencies:   NCP5623B GpsParser ISL29011 libmDot-mbed5 MTS-Serial MMA845x DOGS102 MPL3115A2

MTDOT-BOX/EVB Firmware Description

This Firmware is what ships on DotBox and EVB devices. It is intended to be used as a proof of concept and site survey tool for planning LoRa deployments. The firmware provides a number of different modes of operation:

  • Configuration - Use AT commands to configure network credentials, TX power, TX data rate, view the survey data file, etc.
  • Survey Single - Test network connectivity at current location at a specific TX power and TX data rate. Uplink information, downlink information, and GPS information are saved to the survey data file and can also be sent to the gateway.
  • Survey Sweep - Test network connectivity at current location across a range of TX powers and TX data rates. Uplink information, downlink information, and GPS information for each survey in the sweep are saved to the survey data file and can also be sent to the gateway.
  • LoRa Demo - Gather data from onboard sensors and display it on the screen in real time. Send packets containing sensor data to the gateway either on an interval or when triggered by the user. GPS data is not transmitted.
  • Survey GPS - Gather sensor and GPS data and transmit it to the gateway either on an interval or when triggered by the user. Add padding to packets, switch frequency sub bands, TX power, TX data rate, and more all without exiting Survey GPS Mode.
  • View Data - View the survey data file on the screen one survey at a time.

Additional documentation and information for the MTDOT-BOX/EVB Factory Firmware can be found here.


Dot Libraries

Dot Library Limitations

The commit messages in libmDot-mbed5 and libmDot-dev-mbed5 specify the version of the Dot library the commit contains and the version of mbed-os it was compiled against. We recommend building your application with the version of mbed-os specified in the commit message of the version of the Dot library you're using. This will ensure that you don't run into any runtime issues caused by differences in the mbed-os versions.

Development library for mDot.

[Repository '/teams/MultiTech/code/libmDot-dev-mbed5/' not found]

Stable library for mDot.

Import librarylibmDot-mbed5

Stable version of the mDot library for mbed 5. This version of the library is suitable for deployment scenarios. See lastest commit message for version of mbed-os library that has been tested against.

Last commit 25 Mar 2020 by MultiTech

Layout/LayoutScrollSelect.cpp@16:e76cec0eec43, 2019-03-14 (annotated)

Committer:
jenkins@jenkinsdm1
Date:
Thu Mar 14 08:23:20 2019 -0500
Revision:
16:e76cec0eec43
Parent:
12:05435282f899 
dotbox-firmware revision 3.1.2

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Mike Fiore 1:71125aa00e33 1 /* Copyright (c) <2016> <MultiTech Systems>, MIT License
Mike Fiore 1:71125aa00e33 2 *
Mike Fiore 1:71125aa00e33 3 * Permission is hereby granted, free of charge, to any person obtaining a copy of this software
Mike Fiore 1:71125aa00e33 4 * and associated documentation files (the "Software"), to deal in the Software without restriction,
Mike Fiore 1:71125aa00e33 5 * including without limitation the rights to use, copy, modify, merge, publish, distribute,
Mike Fiore 1:71125aa00e33 6 * sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is
Mike Fiore 1:71125aa00e33 7 * furnished to do so, subject to the following conditions:
Mike Fiore 1:71125aa00e33 8 *
Mike Fiore 1:71125aa00e33 9 * The above copyright notice and this permission notice shall be included in all copies or
Mike Fiore 1:71125aa00e33 10 * substantial portions of the Software.
Mike Fiore 1:71125aa00e33 11 *
Mike Fiore 1:71125aa00e33 12 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
Mike Fiore 1:71125aa00e33 13 * BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
Mike Fiore 1:71125aa00e33 14 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
Mike Fiore 1:71125aa00e33 15 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
Mike Fiore 1:71125aa00e33 16 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Mike Fiore 1:71125aa00e33 17 */
Mike Fiore 1:71125aa00e33 18
Mike Fiore 1:71125aa00e33 19 #include "LayoutScrollSelect.h"
Mike Fiore 1:71125aa00e33 20 #include "MTSLog.h"
Mike Fiore 1:71125aa00e33 21
Mike Fiore 1:71125aa00e33 22 LayoutScrollSelect::LayoutScrollSelect(DOGS102* lcd, Items items, std::string info1, std::string info2)
Mike Fiore 1:71125aa00e33 23 : Layout(lcd),
Mike Fiore 1:71125aa00e33 24 _lSw1(0, 7, "Scroll"),
Mike Fiore 1:71125aa00e33 25 _lSw2(11, 7, "Select"),
Mike Fiore 1:71125aa00e33 26 _lInfo1(0, 0, info1),
Mike Fiore 1:71125aa00e33 27 _lInfo2(0, 1, info2),
Mike Fiore 1:71125aa00e33 28 _lCursor(0, 4, "=>"),
Mike Fiore 1:71125aa00e33 29 _fItem1(3, 2, 14),
Mike Fiore 1:71125aa00e33 30 _fItem2(3, 3, 14),
Mike Fiore 1:71125aa00e33 31 _fItem3(3, 4, 14),
Mike Fiore 1:71125aa00e33 32 _fItem4(3, 5, 14),
Mike Fiore 1:71125aa00e33 33 _fItem5(3, 6, 14),
Mike Fiore 1:71125aa00e33 34 _items(items)
Mike Fiore 1:71125aa00e33 35 {
Mike Fiore 1:71125aa00e33 36 _size = _items.size();
Mike Fiore 1:71125aa00e33 37 _selected = 0;
Mike Fiore 1:71125aa00e33 38 }
Mike Fiore 1:71125aa00e33 39
Mike Fiore 1:71125aa00e33 40 LayoutScrollSelect::~LayoutScrollSelect() {}
Mike Fiore 1:71125aa00e33 41
Mike Fiore 1:71125aa00e33 42 void LayoutScrollSelect::display() {
Mike Fiore 1:71125aa00e33 43 clear();
Mike Fiore 1:71125aa00e33 44 startUpdate();
Mike Fiore 1:71125aa00e33 45
Mike Fiore 1:71125aa00e33 46 writeLabel(_lSw1);
Mike Fiore 1:71125aa00e33 47 writeLabel(_lSw2);
Mike Fiore 1:71125aa00e33 48 writeLabel(_lInfo1);
Mike Fiore 1:71125aa00e33 49 writeLabel(_lInfo2);
Mike Fiore 1:71125aa00e33 50 writeLabel(_lCursor);
Mike Fiore 1:71125aa00e33 51
jenkins@jenkinsdm1 12:05435282f899 52 _selected = 0;
jenkins@jenkinsdm1 12:05435282f899 53
Mike Fiore 1:71125aa00e33 54 switch (_size) {
Mike Fiore 1:71125aa00e33 55 case 0:
Mike Fiore 1:71125aa00e33 56 // special case - no items
Mike Fiore 1:71125aa00e33 57 // (empty)
Mike Fiore 1:71125aa00e33 58 // (empty)
Mike Fiore 1:71125aa00e33 59 // => (empty)
Mike Fiore 1:71125aa00e33 60 // (empty)
Mike Fiore 1:71125aa00e33 61 // (empty)
Mike Fiore 1:71125aa00e33 62 break;
Mike Fiore 1:71125aa00e33 63
Mike Fiore 1:71125aa00e33 64 case 1:
Mike Fiore 1:71125aa00e33 65 // special case - 1 item
Mike Fiore 1:71125aa00e33 66 // (empty)
Mike Fiore 1:71125aa00e33 67 // (empty)
Mike Fiore 1:71125aa00e33 68 // => item1
Mike Fiore 1:71125aa00e33 69 // (empty)
Mike Fiore 1:71125aa00e33 70 // (empty)
Mike Fiore 1:71125aa00e33 71 writeField(_fItem3, _items[0]);
Mike Fiore 1:71125aa00e33 72 break;
Mike Fiore 1:71125aa00e33 73
Mike Fiore 1:71125aa00e33 74 case 2:
Mike Fiore 1:71125aa00e33 75 // special case - 2 items
Mike Fiore 1:71125aa00e33 76 // (empty)
Mike Fiore 1:71125aa00e33 77 // (empty)
Mike Fiore 1:71125aa00e33 78 // => item1
Mike Fiore 1:71125aa00e33 79 // item2
Mike Fiore 1:71125aa00e33 80 // (empty)
Mike Fiore 1:71125aa00e33 81 writeField(_fItem3, _items[0]);
Mike Fiore 1:71125aa00e33 82 writeField(_fItem4, _items[1]);
Mike Fiore 1:71125aa00e33 83 break;
Mike Fiore 1:71125aa00e33 84
Mike Fiore 1:71125aa00e33 85 case 3:
Mike Fiore 1:71125aa00e33 86 // special case - 3 items
Mike Fiore 1:71125aa00e33 87 // (empty)
Mike Fiore 1:71125aa00e33 88 // item3
Mike Fiore 1:71125aa00e33 89 // => item1
Mike Fiore 1:71125aa00e33 90 // item2
Mike Fiore 1:71125aa00e33 91 // (empty)
Mike Fiore 1:71125aa00e33 92 writeField(_fItem2, _items[2]);
Mike Fiore 1:71125aa00e33 93 writeField(_fItem3, _items[0]);
Mike Fiore 1:71125aa00e33 94 writeField(_fItem4, _items[1]);
Mike Fiore 1:71125aa00e33 95 break;
Mike Fiore 1:71125aa00e33 96
Mike Fiore 1:71125aa00e33 97 case 4:
Mike Fiore 1:71125aa00e33 98 // special case - 4 items
Mike Fiore 1:71125aa00e33 99 // item3
Mike Fiore 1:71125aa00e33 100 // item4
Mike Fiore 1:71125aa00e33 101 // => item1
Mike Fiore 1:71125aa00e33 102 // item2
Mike Fiore 1:71125aa00e33 103 // (empty)
Mike Fiore 1:71125aa00e33 104 writeField(_fItem1, _items[2]);
Mike Fiore 1:71125aa00e33 105 writeField(_fItem2, _items[3]);
Mike Fiore 1:71125aa00e33 106 writeField(_fItem3, _items[0]);
Mike Fiore 1:71125aa00e33 107 writeField(_fItem4, _items[1]);
Mike Fiore 1:71125aa00e33 108 break;
Mike Fiore 1:71125aa00e33 109
Mike Fiore 1:71125aa00e33 110 default:
Mike Fiore 1:71125aa00e33 111 // this is the generic case - should handle lists of 5+ items correctly
Mike Fiore 1:71125aa00e33 112 // item4 item6 item9
Mike Fiore 1:71125aa00e33 113 // item5 item7 item10
Mike Fiore 1:71125aa00e33 114 // => item1 => item1 => item1
Mike Fiore 1:71125aa00e33 115 // item2 item2 item2
Mike Fiore 1:71125aa00e33 116 // item3 item3 item3
Mike Fiore 1:71125aa00e33 117 writeField(_fItem1, _items[_size - 2]);
Mike Fiore 1:71125aa00e33 118 writeField(_fItem2, _items[_size - 1]);
Mike Fiore 1:71125aa00e33 119 writeField(_fItem3, _items[0]);
Mike Fiore 1:71125aa00e33 120 writeField(_fItem4, _items[1]);
Mike Fiore 1:71125aa00e33 121 writeField(_fItem5, _items[2]);
Mike Fiore 1:71125aa00e33 122 break;
Mike Fiore 1:71125aa00e33 123 }
Mike Fiore 1:71125aa00e33 124
Mike Fiore 1:71125aa00e33 125 endUpdate();
Mike Fiore 1:71125aa00e33 126 }
Mike Fiore 1:71125aa00e33 127
Mike Fiore 1:71125aa00e33 128 void LayoutScrollSelect::scroll() {
Mike Fiore 1:71125aa00e33 129 size_t index;
Mike Fiore 1:71125aa00e33 130
Mike Fiore 1:71125aa00e33 131 switch (_size) {
Mike Fiore 1:71125aa00e33 132 case 0:
Mike Fiore 1:71125aa00e33 133 case 1:
Mike Fiore 1:71125aa00e33 134 // nothing to scroll
Mike Fiore 1:71125aa00e33 135 break;
Mike Fiore 1:71125aa00e33 136
Mike Fiore 1:71125aa00e33 137 case 2:
Mike Fiore 1:71125aa00e33 138 // special case - 2 items
Mike Fiore 1:71125aa00e33 139 // (empty) -> (empty)
Mike Fiore 1:71125aa00e33 140 // (empty) -> (empty)
Mike Fiore 1:71125aa00e33 141 // => item1 -> => item2
Mike Fiore 1:71125aa00e33 142 // item2 -> item1
Mike Fiore 1:71125aa00e33 143 // (empty) -> (empty)
Mike Fiore 1:71125aa00e33 144
Mike Fiore 1:71125aa00e33 145 index = _selected;
Mike Fiore 1:71125aa00e33 146 // keep selected item up to date
Mike Fiore 1:71125aa00e33 147 increment(_selected);
Mike Fiore 1:71125aa00e33 148
Mike Fiore 1:71125aa00e33 149 startUpdate();
Mike Fiore 1:71125aa00e33 150 // previously selected item moves down to field4
Mike Fiore 1:71125aa00e33 151 writeField(_fItem4, _items[index]);
Mike Fiore 1:71125aa00e33 152 increment(index);
Mike Fiore 1:71125aa00e33 153 // other item moves up to field3
Mike Fiore 1:71125aa00e33 154 writeField(_fItem3, _items[index]);
Mike Fiore 1:71125aa00e33 155 endUpdate();
Mike Fiore 1:71125aa00e33 156 break;
Mike Fiore 1:71125aa00e33 157
Mike Fiore 1:71125aa00e33 158 case 3:
Mike Fiore 1:71125aa00e33 159 // special case - 3 items
Mike Fiore 1:71125aa00e33 160 // (empty) -> (empty)
Mike Fiore 1:71125aa00e33 161 // item3 -> item1
Mike Fiore 1:71125aa00e33 162 // => item1 -> => item2
Mike Fiore 1:71125aa00e33 163 // item2 -> item3
Mike Fiore 1:71125aa00e33 164 // (empty) -> (empty)
Mike Fiore 1:71125aa00e33 165
Mike Fiore 1:71125aa00e33 166 index = _selected;
Mike Fiore 1:71125aa00e33 167 // keep selected item up to date
Mike Fiore 1:71125aa00e33 168 increment(_selected);
Mike Fiore 1:71125aa00e33 169
Mike Fiore 1:71125aa00e33 170 startUpdate();
Mike Fiore 1:71125aa00e33 171 // previously selected item moves up to field2
Mike Fiore 1:71125aa00e33 172 writeField(_fItem2, _items[index]);
Mike Fiore 1:71125aa00e33 173 increment(index);
Mike Fiore 1:71125aa00e33 174 // new selected item moves up to field3
Mike Fiore 1:71125aa00e33 175 writeField(_fItem3, _items[index]);
Mike Fiore 1:71125aa00e33 176 increment(index);
Mike Fiore 1:71125aa00e33 177 // item from field2 moves down to field4
Mike Fiore 1:71125aa00e33 178 writeField(_fItem4, _items[index]);
Mike Fiore 1:71125aa00e33 179 endUpdate();
Mike Fiore 1:71125aa00e33 180 break;
Mike Fiore 1:71125aa00e33 181
Mike Fiore 1:71125aa00e33 182 case 4:
Mike Fiore 1:71125aa00e33 183 // special case - 4 items
Mike Fiore 1:71125aa00e33 184 // item3 -> item4
Mike Fiore 1:71125aa00e33 185 // item4 -> item1
Mike Fiore 1:71125aa00e33 186 // => item1 -> => item2
Mike Fiore 1:71125aa00e33 187 // item2 -> item3
Mike Fiore 1:71125aa00e33 188 // (empty) -> (empty)
Mike Fiore 1:71125aa00e33 189
Mike Fiore 1:71125aa00e33 190 index = _selected;
Mike Fiore 1:71125aa00e33 191 // keep selected item up to date
Mike Fiore 1:71125aa00e33 192 increment(_selected);
Mike Fiore 1:71125aa00e33 193
Mike Fiore 1:71125aa00e33 194 startUpdate();
Mike Fiore 1:71125aa00e33 195 // previously selected item moves up to field2
Mike Fiore 1:71125aa00e33 196 writeField(_fItem2, _items[index]);
Mike Fiore 1:71125aa00e33 197 increment(index);
Mike Fiore 1:71125aa00e33 198 // new selected item moves up to field3
Mike Fiore 1:71125aa00e33 199 writeField(_fItem3, _items[index]);
Mike Fiore 1:71125aa00e33 200 increment(index);
Mike Fiore 1:71125aa00e33 201 // item from field1 moves down to field4
Mike Fiore 1:71125aa00e33 202 writeField(_fItem4, _items[index]);
Mike Fiore 1:71125aa00e33 203 increment(index);
Mike Fiore 1:71125aa00e33 204 // item from field2 moves up to field1
Mike Fiore 1:71125aa00e33 205 writeField(_fItem1, _items[index]);
Mike Fiore 1:71125aa00e33 206 endUpdate();
Mike Fiore 1:71125aa00e33 207 break;
Mike Fiore 1:71125aa00e33 208
Mike Fiore 1:71125aa00e33 209 default:
Mike Fiore 1:71125aa00e33 210 // this is the generic case - should handle lists of 5+ items correctly
Mike Fiore 1:71125aa00e33 211 // item4 -> item5 item6 -> item7
Mike Fiore 1:71125aa00e33 212 // item5 -> item1 item7 -> item1
Mike Fiore 1:71125aa00e33 213 // => item1 -> => item2 => item1 -> => item2
Mike Fiore 1:71125aa00e33 214 // item2 -> item3 item2 -> item3
Mike Fiore 1:71125aa00e33 215 // item3 -> item4 item3 -> item4
Mike Fiore 1:71125aa00e33 216
Mike Fiore 1:71125aa00e33 217 index = _selected;
Mike Fiore 1:71125aa00e33 218 // keep selected item up to date
Mike Fiore 1:71125aa00e33 219 increment(_selected);
Mike Fiore 1:71125aa00e33 220
Mike Fiore 1:71125aa00e33 221 startUpdate();
Mike Fiore 1:71125aa00e33 222 decrement(index);
Mike Fiore 1:71125aa00e33 223 // item from field2 moves up to field1
Mike Fiore 1:71125aa00e33 224 writeField(_fItem1, _items[index]);
Mike Fiore 1:71125aa00e33 225 increment(index);
Mike Fiore 1:71125aa00e33 226 // previously selected item moves up to field2
Mike Fiore 1:71125aa00e33 227 writeField(_fItem2, _items[index]);
Mike Fiore 1:71125aa00e33 228 increment(index);
Mike Fiore 1:71125aa00e33 229 // new selected item moves up to field3
Mike Fiore 1:71125aa00e33 230 writeField(_fItem3, _items[index]);
Mike Fiore 1:71125aa00e33 231 increment(index);
Mike Fiore 1:71125aa00e33 232 // item from field5 moves up to field4
Mike Fiore 1:71125aa00e33 233 writeField(_fItem4, _items[index]);
Mike Fiore 1:71125aa00e33 234 increment(index);
Mike Fiore 1:71125aa00e33 235 // next item (from field1 or off screen) moves up to field5
Mike Fiore 1:71125aa00e33 236 writeField(_fItem5, _items[index]);
Mike Fiore 1:71125aa00e33 237 endUpdate();
Mike Fiore 1:71125aa00e33 238 break;
Mike Fiore 1:71125aa00e33 239 }
Mike Fiore 1:71125aa00e33 240 }
Mike Fiore 1:71125aa00e33 241
Mike Fiore 1:71125aa00e33 242 std::string LayoutScrollSelect::select() {
Mike Fiore 1:71125aa00e33 243 std::string selected = "";
Mike Fiore 1:71125aa00e33 244 if (_size > 0)
Mike Fiore 1:71125aa00e33 245 selected = _items[_selected];
Mike Fiore 1:71125aa00e33 246
Mike Fiore 1:71125aa00e33 247 return selected;
Mike Fiore 1:71125aa00e33 248 }
Mike Fiore 1:71125aa00e33 249
Mike Fiore 1:71125aa00e33 250 void LayoutScrollSelect::increment(size_t& index) {
Mike Fiore 1:71125aa00e33 251 if (_size > 1) {
Mike Fiore 1:71125aa00e33 252 index++;
Mike Fiore 1:71125aa00e33 253 index %= _size;
Mike Fiore 1:71125aa00e33 254 }
Mike Fiore 1:71125aa00e33 255 }
Mike Fiore 1:71125aa00e33 256
Mike Fiore 1:71125aa00e33 257 void LayoutScrollSelect::decrement(size_t& index) {
Mike Fiore 1:71125aa00e33 258 if (_size > 1) {
Mike Fiore 1:71125aa00e33 259 if (index == 0)
Mike Fiore 1:71125aa00e33 260 index = _size - 1;
Mike Fiore 1:71125aa00e33 261 else
Mike Fiore 1:71125aa00e33 262 index--;
Mike Fiore 1:71125aa00e33 263 }
Mike Fiore 1:71125aa00e33 264 }