MultiTech / Mbed OS Dot-AT-Firmware

AT command firmware for MultiTech Dot devices.

Fork of mDot_AT_firmware by MultiTech

Dot Library Not Included!

Because these example programs can be used for both mDot and xDot devices, the LoRa stack is not included. The libmDot library should be imported if building for mDot devices. The libxDot library should be imported if building for xDot devices. The AT firmware was last tested with mbed-os-5.4.7. Using a version past mbed-os-5.4.7 will cause the build to fail. The library used with the AT firmware has to match the mbed-os version.

Dot Library Version 3 Updates

Dot Library versions 3.x.x require a channel plan to be injected into the stack. The Dot-Examples and Dot-AT-Firmware do this by defining a macro called "CHANNEL_PLAN" that controls the channel plan that will be used in the examples. Available channel plans will be in the Dot Library repository in the plans folder.

Revision 20 and earlier of Dot-Examples and revision 15 and earlier of Dot-AT-Firmware should be used with Dot Library versions prior to 3.0.0.

Fota Library

Th Fota Library must be added to compile for mDot 3.1.0 with Fota support. Latest dev libraries and 3.2.0 release will include Fota with libmDot/libxDot.

AT Firmware Description

This AT Firmware is what ships on mDot and xDot devices. It provides an AT command interface for using the mDot or xDot for LoRa communication.

AT command documentation can be found on Multitech.com.

The firmware changelog can be found here. The library changelog can be found here.

Dot Libraries

Dot Library Limitations

The commit messages in libmDot-mbed5 and libmDot-dev-mbed5 specify the version of the Dot library the commit contains and the version of mbed-os it was compiled against. We recommend building your application with the version of mbed-os specified in the commit message of the version of the Dot library you're using. This will ensure that you don't run into any runtime issues caused by differences in the mbed-os versions.

Stable and development libraries are available for both mDot and xDot platforms. The library chosen must match the target platform. Compiling for the mDot platform with the xDot library or vice versa will not succeed.

mDot Library

Development library for mDot.

libmDot-dev

Stable library for mDot.

libmDot

xDot Library

Development library for xDot.

libxDot-dev

Stable library for xDot.

libxDot

CommandTerminal/CmdSendBinary.cpp@33:5c0252521669, 2021-01-29 (annotated)

Committer:
Jason Reiss
Date:
Fri Jan 29 13:04:32 2021 -0600
Revision:
33:5c0252521669
Parent:
28:c222ca8383f4 
Remove moved commands

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Mike Fiore 1:e52ae6584f1c 1 #include "CmdSendBinary.h"
Mike Fiore 1:e52ae6584f1c 2 #include "CommandTerminal.h"
Mike Fiore 1:e52ae6584f1c 3
Jason Reiss 28:c222ca8383f4 4 CmdSendBinary::CmdSendBinary() :
Jason Reiss 28:c222ca8383f4 5 #if MTS_CMD_TERM_VERBOSE
Jason Reiss 28:c222ca8383f4 6 Command("Send Binary", "AT+SENDB", "Sends supplied binary (hex) packet data one time and return response", "(hex:242)")
Jason Reiss 27:5fafd3b26ac3 7 #else
Jason Reiss 28:c222ca8383f4 8 Command("AT+SENDB")
Jason Reiss 27:5fafd3b26ac3 9 #endif
Jason Reiss 28:c222ca8383f4 10 {}
Mike Fiore 1:e52ae6584f1c 11
jenkins@jenkinsdm1 18:63f098f042b2 12 uint32_t CmdSendBinary::action(const std::vector<std::string>& args) {
Mike Fiore 1:e52ae6584f1c 13 std::vector<uint8_t> data;
Jason Reiss 23:4f0a981c0349 14
Mike Fiore 9:ff62b20f7000 15 int temp;
Mike Fiore 1:e52ae6584f1c 16 uint32_t length = args[1].size();
Mike Fiore 1:e52ae6584f1c 17
Jason Reiss 23:4f0a981c0349 18 // Detach the serial rx irq handler temporarily here to allow for deep sleep
Jason Reiss 23:4f0a981c0349 19 //CommandTerminal::Serial()->detach();
Jason Reiss 23:4f0a981c0349 20
Mike Fiore 1:e52ae6584f1c 21 // Convert the ASCII hex data to binary...
Mike Fiore 1:e52ae6584f1c 22 for (uint32_t i = 0; i < length; i += 2) {
Mike Fiore 1:e52ae6584f1c 23 sscanf(&args[1][i], "%2x", &temp);
Mike Fiore 1:e52ae6584f1c 24 data.push_back(temp);
Mike Fiore 1:e52ae6584f1c 25 }
Mike Fiore 1:e52ae6584f1c 26
Mike Fiore 14:f9a77400b622 27 if (CommandTerminal::Dot()->send(data, CommandTerminal::Dot()->getTxWait()) != mDot::MDOT_OK) {
Jason Reiss 23:4f0a981c0349 28 //CommandTerminal::Serial()->attach();
Mike Fiore 1:e52ae6584f1c 29 return 1;
Mike Fiore 1:e52ae6584f1c 30 }
Mike Fiore 1:e52ae6584f1c 31
Jason Reiss 28:c222ca8383f4 32 if (CommandTerminal::Dot()->getTxWait()) {
Jason Reiss 28:c222ca8383f4 33 printRecvData();
Mike Fiore 1:e52ae6584f1c 34 }
Mike Fiore 1:e52ae6584f1c 35
Jason Reiss 23:4f0a981c0349 36 //CommandTerminal::Serial()->attach();
Mike Fiore 1:e52ae6584f1c 37 return 0;
Mike Fiore 1:e52ae6584f1c 38 }
Mike Fiore 1:e52ae6584f1c 39
jenkins@jenkinsdm1 18:63f098f042b2 40 bool CmdSendBinary::verify(const std::vector<std::string>& args) {
Mike Fiore 1:e52ae6584f1c 41 if (args.size() == 2) {
Mike Fiore 1:e52ae6584f1c 42 if (args[1].size() > 484 || !isHexString(args[1], args[1].size() / 2)) {
Jason Reiss 28:c222ca8383f4 43 #if MTS_CMD_TERM_VERBOSE
Mike Fiore 14:f9a77400b622 44 CommandTerminal::setErrorMessage("Invalid hex string, (hex:242)");
Jason Reiss 28:c222ca8383f4 45 #endif
Mike Fiore 1:e52ae6584f1c 46 return false;
Mike Fiore 1:e52ae6584f1c 47 }
Mike Fiore 1:e52ae6584f1c 48
Mike Fiore 1:e52ae6584f1c 49 return true;
Mike Fiore 1:e52ae6584f1c 50 }
Mike Fiore 1:e52ae6584f1c 51
Jason Reiss 28:c222ca8383f4 52 #if MTS_CMD_TERM_VERBOSE
Mike Fiore 14:f9a77400b622 53 CommandTerminal::setErrorMessage("Invalid arguments");
Jason Reiss 28:c222ca8383f4 54 #endif
Mike Fiore 1:e52ae6584f1c 55 return false;
Mike Fiore 1:e52ae6584f1c 56 }
Mike Fiore 1:e52ae6584f1c 57