Diff: main.cpp

Revision:

11:9fa2402071de

Parent:

10:228a52f8107d

Child:

12:5d3f9663ea0c

--- a/main.cpp	Wed Jun 26 01:05:04 2019 +0000
+++ b/main.cpp	Wed Jul 10 11:19:35 2019 +0000
@@ -47,6 +47,8 @@
 #define STRING_ARG(arg) #arg
 #define STRING_NAME(name) STRING_ARG(name)
 #define TARGET_NAME STRING_NAME(TARGET)
+#elif defined(TARGET_MAX32600)
+#define TARGET_NAME "MAX32600"
 #elif defined(TARGET_LPC1768)
 #define TARGET_NAME "LPC1768"
 #elif defined(TARGET_NUCLEO_F446RE)
@@ -233,6 +235,13 @@
 #define D13 P1_0
 #endif
 //--------------------------------------------------
+#elif defined(TARGET_MAX32600)
+// target MAX32600
+//
+#define analogIn4_IS_HIGH_RANGE_OF_analogIn0 0
+const float ADC_FULL_SCALE_VOLTAGE = 1.500;
+//
+//--------------------------------------------------
 #elif defined(TARGET_NUCLEO_F446RE) || defined(TARGET_NUCLEO_F401RE)
 // TODO1: target NUCLEO_F446RE
 //
@@ -479,6 +488,10 @@
 DigitalOut spi2_max541_cs(SPI2_SS); // TARGET_MAX32635MBED: P2_7 Arduino 2x3-pin header
 #define HAS_SPI2_MAX541 1
 //
+#elif defined(TARGET_MAX32600)
+SPI spi(SPI2_MOSI, SPI2_MISO, SPI2_SCK); // mosi, miso, sclk spi1 TARGET_MAX32600MBED: Arduino 10-pin header D11 D12 D13
+DigitalOut spi_cs(SPI2_SS); // Generic: Arduino 10-pin header D10
+//
 #elif defined(TARGET_NUCLEO_F446RE) || defined(TARGET_NUCLEO_F401RE)
 // TODO1: avoid resource conflict between P5_0, P5_1, P5_2 SPI and DigitalInOut
 // void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel)
@@ -670,6 +683,16 @@
 // The baud rate does not affect the virtual USBSerial UART.
 USBSerial serial;
 //--------------------------------------------------
+#elif defined(TARGET_MAX32600)
+    #include "USBSerial.h"
+// Hardware serial port over DAPLink
+// The default baud rate for the DapLink UART is 9600
+Serial DAPLINKserial(P1_1, P1_0);     // tx, rx
+    #define HAS_DAPLINK_SERIAL 1
+// Virtual serial port over USB
+// The baud rate does not affect the virtual USBSerial UART.
+USBSerial serial;
+//--------------------------------------------------
 #elif defined(TARGET_NUCLEO_F446RE) || defined(TARGET_NUCLEO_F401RE)
 Serial serial(SERIAL_TX, SERIAL_RX);     // tx, rx
 //--------------------------------------------------
@@ -1266,6 +1289,32 @@
     AnalogIn analogIn5(AIN_5); // TARGET_MAX32630 J1.6 AIN_5 = AIN1 / 5.0     fullscale is 6.0V
 #endif
 //--------------------------------------------------
+#elif defined(TARGET_MAX32600)
+    #define HAS_analogIn0 1
+    #define HAS_analogIn1 1
+    #define HAS_analogIn2 1
+    #define HAS_analogIn3 1
+    #define HAS_analogIn4 1
+    #define HAS_analogIn5 1
+#if HAS_analogIn0
+    AnalogIn analogIn0(A0);
+#endif
+#if HAS_analogIn1
+    AnalogIn analogIn1(A1);
+#endif
+#if HAS_analogIn2
+    AnalogIn analogIn2(A2);
+#endif
+#if HAS_analogIn3
+    AnalogIn analogIn3(A3);
+#endif
+#if HAS_analogIn4
+    AnalogIn analogIn4(A4);
+#endif
+#if HAS_analogIn5
+    AnalogIn analogIn5(A5);
+#endif
+//--------------------------------------------------
 #elif defined(TARGET_NUCLEO_F446RE)
     #define HAS_analogIn0 1
     #define HAS_analogIn1 1