Diff: Test_Menu_MAX5171.cpp

Revision:

11:48aefcaa1d29

Child:

22:a14c19b97d0b

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Test_Menu_MAX5171.cpp	Wed Jun 26 01:06:34 2019 +0000
@@ -0,0 +1,218 @@
+// /*******************************************************************************
+// * Copyright (C) 2019 Maxim Integrated Products, Inc., All Rights Reserved.
+// *
+// * Permission is hereby granted, free of charge, to any person obtaining a
+// * copy of this software and associated documentation files (the "Software"),
+// * to deal in the Software without restriction, including without limitation
+// * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+// * and/or sell copies of the Software, and to permit persons to whom the
+// * Software is furnished to do so, subject to the following conditions:
+// *
+// * The above copyright notice and this permission notice shall be included
+// * in all copies or substantial portions of the Software.
+// *
+// * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+// * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+// * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+// * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+// * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+// * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+// * OTHER DEALINGS IN THE SOFTWARE.
+// *
+// * Except as contained in this notice, the name of Maxim Integrated
+// * Products, Inc. shall not be used except as stated in the Maxim Integrated
+// * Products, Inc. Branding Policy.
+// *
+// * The mere transfer of this software does not imply any licenses
+// * of trade secrets, proprietary technology, copyrights, patents,
+// * trademarks, maskwork rights, or any other form of intellectual
+// * property whatsoever. Maxim Integrated Products, Inc. retains all
+// * ownership rights.
+// *******************************************************************************
+// */
+
+#include "mbed.h"
+#include "MAX5171.h"
+#include "CmdLine.h"
+
+//--------------------------------------------------
+// tolerate AT commands, which may be sent during probe, such as:
+//  AT
+//  AT+CGMI      -- request manufacturer identification AT+CMGI=?
+//  AT+CGMM      -- request manufacturer model
+//  AT%IPSYS?
+//  ATE0         -- echo disable
+//  ATV1         -- verbose result codes OK | ERROR | NO CARRIER
+//  AT+CMEE=1
+//  ATX4
+//  AT&C1
+//  ATE0
+//  AT+CMEE=1
+//  AT+GCAP
+//  ATI
+//  AT+CPIN?
+//  AT+CGMM
+#ifndef IGNORE_AT_COMMANDS
+#define IGNORE_AT_COMMANDS 1
+#endif
+
+extern MAX5171 g_MAX5171_device; // defined in main.cpp
+
+bool MAX5171_menu_onEOLcommandParser(CmdLine & cmdLine)
+{
+    switch (cmdLine[0])
+    {
+        case '0':
+        {
+            // recommended for hex command codes 10..1F
+            //~ cmdLine.serial().printf("\r\n 0 code=? -- CODE");
+            uint16_t code;
+            if (cmdLine.parse_uint16_dec("code", code))
+            {
+            }
+            cmdLine.serial().printf("CODE code=%d", code);
+            g_MAX5171_device.CODE(code);
+            return true; // command was handled by MAX5171
+        }
+        break;
+        case '4':
+        {
+            // recommended for hex command codes 10..1F
+            //~ cmdLine.serial().printf("\r\n 4 code=? -- CODE_LOAD");
+            uint16_t code;
+            if (cmdLine.parse_uint16_dec("code", code))
+            {
+            }
+            cmdLine.serial().printf("CODE_LOAD code=%d", code);
+            g_MAX5171_device.CODE_LOAD(code);
+            return true; // command was handled by MAX5171
+        }
+        break;
+        case '8':
+        {
+            // recommended for hex command codes 10..1F
+            //~ cmdLine.serial().printf("\r\n 8 -- LOAD");
+            cmdLine.serial().printf("LOAD");
+            g_MAX5171_device.LOAD();
+            return true; // command was handled by MAX5171
+        }
+        break;
+        case 'c': case 'C':
+        {
+            // recommended for hex command codes 10..1F
+            //~ cmdLine.serial().printf("\r\n c -- NOP");
+            cmdLine.serial().printf("NOP");
+            g_MAX5171_device.NOP();
+            return true; // command was handled by MAX5171
+        }
+        break;
+        case 'd': case 'D':
+        {
+            // recommended for hex command codes 10..1F
+            //~ cmdLine.serial().printf("\r\n d -- SHUTDOWN");
+            cmdLine.serial().printf("SHUTDOWN");
+            g_MAX5171_device.SHUTDOWN();
+            return true; // command was handled by MAX5171
+        }
+        break;
+        case 'e': case 'E':
+        {
+            switch (cmdLine[1])
+            {
+                case '0':
+                {
+                    // recommended for hex command codes 10..1F
+                    //~ cmdLine.serial().printf("\r\n e0 -- UPO_LOW");
+                    cmdLine.serial().printf("UPO_LOW");
+                    g_MAX5171_device.UPO_LOW();
+                    return true; // command was handled by MAX5171
+                }
+                break;
+                case '8':
+                {
+                    // recommended for hex command codes 10..1F
+                    //~ cmdLine.serial().printf("\r\n e8 -- UPO_HIGH");
+                    cmdLine.serial().printf("UPO_HIGH");
+                    g_MAX5171_device.UPO_HIGH();
+                    return true; // command was handled by MAX5171
+                }
+                break;
+            }
+        }
+        break;
+        case 'f': case 'F':
+        {
+            switch (cmdLine[1])
+            {
+                case '0':
+                {
+                    // recommended for hex command codes 10..1F
+                    //~ cmdLine.serial().printf("\r\n f0 -- MODE1_DOUT_SCLK_RISING_EDGE");
+                    cmdLine.serial().printf("MODE1_DOUT_SCLK_RISING_EDGE");
+                    g_MAX5171_device.MODE1_DOUT_SCLK_RISING_EDGE();
+                    return true; // command was handled by MAX5171
+                }
+                break;
+                case '8':
+                {
+                    // recommended for hex command codes 10..1F
+                    //~ cmdLine.serial().printf("\r\n f8 -- MODE0_DOUT_SCLK_FALLING_EDGE");
+                    cmdLine.serial().printf("MODE0_DOUT_SCLK_FALLING_EDGE");
+                    g_MAX5171_device.MODE0_DOUT_SCLK_FALLING_EDGE();
+                    return true; // command was handled by MAX5171
+                }
+                break;
+            }
+        }
+        break;
+        case 'a': case 'A':
+        {
+            // recommended for hex command codes A0..AF
+            switch (cmdLine[1])
+            {
+                case 't': case 'T':
+#if IGNORE_AT_COMMANDS
+# if HAS_DAPLINK_SERIAL
+                    cmdLine_DAPLINKserial.serial().printf("\r\n ignore AT command \"%s\"\r\n", cmdLine.str());
+# endif // HAS_DAPLINK_SERIAL
+                    // AT command: skip the prompt to avoid confusing modem detector
+                    return false; // command not handled
+#endif // IGNORE_AT_COMMANDS
+            }
+        }
+        break;
+        case 'x': case 'X':
+        {
+        }
+        break;
+        case 'y': case 'Y':
+        {
+        }
+        break;
+        case 'z': case 'Z':
+        {
+        }
+        break;
+        case '~':     // TODO: IGNORE_AT_COMMANDS -- ignore ~~~ modem command
+        {
+            // TODO: '~' is not recommended for menu commands, interferes with ssh
+#if IGNORE_AT_COMMANDS
+# if HAS_DAPLINK_SERIAL
+            cmdLine_DAPLINKserial.serial().printf("\r\n ignore AT command \"%s\"\r\n", cmdLine.str());
+# endif // HAS_DAPLINK_SERIAL
+#endif // IGNORE_AT_COMMANDS
+        }
+        break;
+        case '+':     // TODO: IGNORE_AT_COMMANDS -- ignore +++ modem command
+        {
+#if IGNORE_AT_COMMANDS
+# if HAS_DAPLINK_SERIAL
+            cmdLine_DAPLINKserial.serial().printf("\r\n ignore AT command \"%s\"\r\n", cmdLine.str());
+# endif // HAS_DAPLINK_SERIAL
+#endif // IGNORE_AT_COMMANDS
+        }
+        break;
+    } // end switch (cmdLine[0])
+    return false; // command not handled
+} // end bool MAX5171_menu_onEOLcommandParser(CmdLine & cmdLine)
+