Revision 0:2d0c91de9279, committed 2017-04-13

Comitter:

j3

Date:

Thu Apr 13 23:23:36 2017 +0000

Child:

1:9e2a3b4a24c7

Commit message:

init commit, basic outline

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/MAX30101.cpp	Thu Apr 13 23:23:36 2017 +0000
@@ -0,0 +1,119 @@
+/*******************************************************************************
+ * Copyright (C) 2017 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+ 
+ 
+#include "MAX30101.h"
+
+
+//*****************************************************************************
+MAX30101::MAX30101(PinName sda, PinName scl):
+m_i2cBus(sda, scl)
+{
+    //empty block
+}
+
+
+//*****************************************************************************
+MAX30101::MAX30101(I2C &i2c):
+m_i2cBus(i2c)
+{
+    //empty block
+}
+
+
+//*****************************************************************************
+MAX30101::~MAX30101()
+{
+    //empty block
+}
+
+
+//*****************************************************************************
+int32_t MAX30101::enableInterrupts(const InterruptBitField_u data)
+{
+    char cmdData[3] = {InterruptEnable1, (data.all & 0xF0), (data.all & 0x02)};
+    
+    return m_i2cBus.write(I2C_W_ADRS, cmdData, 3);
+}
+
+
+//*****************************************************************************
+int32_t MAX30101::getInterruptStatus(InterruptBitField_u &data)
+{
+    char local_data[3];
+    local_data[0] = InterruptStatus1;
+    
+    int32_t result = m_i2cBus.write(I2C_W_ADRS, local_data, 1);
+    if(result == 0)
+    {
+        result = m_i2cBus.read(I2C_R_ADRS, (local_data + 1), 2);
+        if(result == 0)
+        {
+            data.all = local_data[1] + local_data[2];
+        }
+    }
+    
+    return result;
+}
+
+
+//*****************************************************************************
+int32_t MAX30101::writeRegister(Registers_e reg, uint8_t value)
+{
+    char local_data[2] = {reg, value};
+
+    return m_i2cBus.write(I2C_W_ADRS, local_data, 2);
+}
+
+
+//*****************************************************************************
+int32_t MAX30101::readRegister(Registers_e reg, uint8_t &value)
+{
+    int32_t result;
+    
+    char local_data[2];
+    local_data[0] = reg;
+
+    result = m_i2cBus.write(I2C_W_ADRS, local_data, 1);
+    if(result == 0) 
+    {
+        result = m_i2cBus.read(I2C_R_ADRS, (local_data + 1), 1);
+        if (result == 0) 
+        {
+            value = local_data[1];
+        }
+    }
+
+    return result;
+}
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/MAX30101.h	Thu Apr 13 23:23:36 2017 +0000
@@ -0,0 +1,352 @@
+/*******************************************************************************
+ * Copyright (C) 2017 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+#ifndef __MAX30101_H_
+#define __MAX30101_H_
+
+#include "mbed.h"
+
+/**
+ * Driver for the MAX30101
+ *
+ * @code
+ * #include "mbed.h"
+ * #include "max32630fthr.h"
+ * #include "MAX30101.h"
+ * 
+ * MAX32630FTHR pegasus(MAX32630FTHR::VIO_3V3);
+ *
+ * //Get I2C instance
+ * I2C i2cBus(P3_4, P3_5);
+ *
+ * //Get temp sensor instance
+ * MAX30101 op_sensor(i2cBus); //Constructor takes 7-bit slave adrs
+ *
+ * int main(void) 
+ * {
+ *     //use sensor
+ * }
+ * @endcode
+ */
+ 
+class MAX30101
+{
+public:
+
+    ///7-bit slave address
+    static const uint8_t I2C_ADRS   = 0x57; 
+    ///8-bit write address
+    static const uint8_t I2C_W_ADRS = 0xAE;
+    ///8-bit read address
+    static const uint8_t I2C_R_ADRS = 0xAF;
+    
+    ///MAX30101 Register Map
+    enum Registers_e
+    {
+        InterruptStatus1   = 0x00,
+        InterruptStatus2   = 0x01,
+        InterruptEnable1   = 0x02,
+        InterruptEnable2   = 0x03,
+        FIFO_WritePointer  = 0x04,
+        OverflowCounter    = 0x05,
+        FIFO_ReadPointer   = 0x06,
+        FIFO_DataRegister  = 0x07,
+        FIFO_Configuration = 0x08,
+        ModeConfiguration  = 0x09,
+        SpO2Configuration  = 0x0A,
+        LED1_PA            = 0x0C,
+        LED2_PA            = 0x0D,
+        LED3_PA            = 0x0E,
+        ProxModeLED_PA     = 0x10,
+        ModeControlReg1    = 0x11,
+        ModeControlReg2    = 0x12,
+        DieTempInt         = 0x1F, 
+        DieTempFrac        = 0x20,
+        DieTempConfig      = 0x21,
+        ProxIntThreshold   = 0x30,
+        RevID              = 0xFE,
+        PartID             = 0xFF
+    };
+    
+    ///Interrupt Status/Enable BitField
+    union InterruptBitField_u
+    {
+        uint8_t all;
+        
+        struct BitField_s 
+        {
+            uint8_t pwr_rdy  : 1; ///< Bit0
+            uint8_t die_temp : 1; ///< Bit1
+            uint8_t reserved : 2; ///< Bit3:2
+            uint8_t prox_int : 1; ///< Bit4
+            uint8_t alc_ovf  : 1; ///< Bit5
+            uint8_t ppg_rdy  : 1; ///< Bit6
+            uint8_t a_full   : 1; ///< Bit7
+        }bits;
+    };
+    
+    ///FIFO Configuration BitField
+    union FIFO_Configuration_u
+    {
+        uint8_t all;
+        struct BitField_s
+        {
+            uint8_t fifo_a_full       : 4;
+            uint8_t fifo_roll_over_en : 1;
+            uint8_t sample_average    : 3;
+        }bits;
+    };
+    
+    ///Mode Configuration BitField
+    union ModeConfiguration_u
+    {
+        uint8_t all;
+        struct BitField_s
+        {
+            uint8_t mode     : 3;
+            uint8_t reserved : 3;
+            uint8_t reset    : 1;
+            uint8_t shdn     : 1;
+        }bits;
+    };
+    
+    ///SpO2 Configuration BitField
+    union SpO2Configuration_u
+    {
+        uint8_t all;
+        struct BitField_s
+        {
+            uint8_t led_pw         : 2;
+            uint8_t spo2_sr        : 3;
+            uint8_t spo2_adc_range : 2;
+            uint8_t reserved       : 1;
+        }bits;
+    };
+    
+    ///Multi-LED Mode Control Register BitField
+    union ModeControlReg_u
+    {
+        uint8_t all;
+        struct BitField_s
+        {
+            uint8_t lo_slot     : 3;
+            uint8_t reserved1 : 1;
+            uint8_t hi_slot     : 3;
+            uint8_t reserved2 : 1;
+        }bits;  
+    };
+    
+    /**
+    * @brief  Constructor using I2C PinNames
+    * @param sda - Pinname for sda
+    * @param scl - Pinname for scl
+    */
+    MAX30101(PinName sda, PinName scl);
+    
+    /**
+    * @brief  Constructor using reference to I2C object
+    * @param i2c - Reference to I2C object
+    */
+    MAX30101(I2C &i2c);
+
+    /** @brief Destructor */
+    ~MAX30101();
+    
+    /**
+    * @brief Writes appropriate bits to Interrupt Enable 1 and 2.
+    *
+    * @param data - Interrupts to enable
+    * @return 0 on success, non 0 otherwise
+    */
+    int32_t enableInterrupts(const InterruptBitField_u data);
+    
+    /**
+    * @brief Reads interrupt status flags from Interrupt Status 1 and 2.
+    *
+    * @param[out] data - Contains interrupts status flags on success.
+    * @return 0 on success, non 0 otherwise
+    */
+    int32_t getInterruptStatus(InterruptBitField_u &data);
+    
+    /**
+    * @brief Writes FIFO configuration register with given data
+    *
+    * @param config - FIFO Configuration
+    * @return 0 on success, non 0 otherwise
+    */
+    int32_t setFIFOConfiguration(const FIFO_Configuration_u config);
+    
+    /**
+    * @brief Reads FIFO configuration register
+    *
+    * @param[out] config - FIFO Configuration on success
+    * @return 0 on success, non 0 otherwise
+    */
+    int32_t getFIFOConfiguration(FIFO_Configuration_u &config);
+    
+    /**
+    * @brief Writes Mode configuration register with given data
+    *
+    * @param config - Mode Configuration
+    * @return 0 on success, non 0 otherwise
+    */
+    int32_t setModeConfiguration(const ModeConfiguration_u config);
+    
+    /**
+    * @brief Reads Mode configuration register
+    *
+    * @param[out] config - Mode Configuration on success
+    * @return 0 on success, non 0 otherwise
+    */
+    int32_t getModeConfiguration(ModeConfiguration_u &config);
+    
+    /**
+    * @brief Writes SpO2 configuration register with given data
+    *
+    * @param config - SpO2 Configuration
+    * @return 0 on success, non 0 otherwise
+    */
+    int32_t setSpO2Configuration(const SpO2Configuration_u config);
+    
+    /**
+    * @brief Reads SpO2 configuration register
+    *
+    * @param[out] config - SpO2 Configuration on success
+    * @return 0 on success, non 0 otherwise
+    */
+    int32_t getSpO2Configuration(SpO2Configuration_u &config);
+    
+    /**
+    * @brief Writes LEDx/Prox Pulse Amplitude register with given data
+    *
+    * @param reg - LEDx/Prox Pulse Amplitude register to write
+    * @param amp - LED pulse amplitude
+    * @return 0 on success, non 0 otherwise
+    */
+    int32_t setLEDPulseAmplitude(Registers_e reg, const uint8_t amp);
+    
+    /**
+    * @brief Reads LEDx/Prox Pulse Amplitude register
+    *
+    * @param reg - LEDx/Prox Pulse Amplitude register to read
+    * @param[out] amp - LED pulse amplitude on success
+    * @return 0 on success, non 0 otherwise
+    */
+    int32_t getLEDPulseAmplitude(Registers_e reg, uint8_t &amp);
+    
+    /**
+    * @brief Writes Multi-LED Mode Control Register 
+    *
+    * @param reg - Multi-LED Mode Control register 1 or 2
+    * @param data - Data to write to register
+    * @return 0 on success, non 0 otherwise
+    */
+    int32_t setMultiLEDModeControl(Registers_e reg, const ModeControlReg_u data);
+    
+    /**
+    * @brief Reads Multi-LED Mode Control Register 
+    *
+    * @param reg - Multi-LED Mode Control register 1 or 2
+    * @param[out] data - Data read from register on success
+    * @return 0 on success, non 0 otherwise
+    */
+    int32_t getMultiLEDModeControl(Registers_e reg, ModeControlReg_u &data);
+    
+    /**
+    * @brief Gets raw die temperature
+    *
+    * @param[out] data - Raw die temperature on success
+    *
+    * @return 0 on success, non 0 otherwise
+    */
+    int32_t getDieTemperature(uint16_t &data);
+    
+    /**
+    * @brief Gets die temperature in celsius
+    *
+    * @param[out] data - Die temperature in celsius on success
+    *
+    * @return 0 on success, non 0 otherwise
+    */
+    int32_t getDieTemperatureC(float &data);
+    
+    /**
+    * @brief Converts celsius to Fahrenheit
+    *
+    * @param c - Temperature in celsius
+    *
+    * @return Temperature in Fahrenheit
+    */
+    float celsius2fahrenheit(float c); 
+    
+    /**
+    * @brief Writes Proximity Interrupt Threshold Register 
+    *
+    * @param data - Data to write to register
+    * @return 0 on success, non 0 otherwise
+    */
+    int32_t setProxIntThreshold(const uint8_t data);
+    
+    /**
+    * @brief Reads Proximity Interrupt Threshold Register 
+    *
+    * @param data - Data read on success
+    * @return 0 on success, non 0 otherwise
+    */
+    int32_t getProxIntThreshold(uint8_t &data);
+
+protected:
+
+    /** 
+    * @brief Write register of device
+    * @param reg - Register address
+    * @param value - Value to write
+    * @return 0 on success, non-zero on failure
+    */
+    int32_t writeRegister(Registers_e reg, uint8_t value);
+
+    /**
+    * @brief  Read register of device
+    * @param reg - Register address
+    * @param[out] value - Read data on success
+    * @return 0 on success, non-zero on failure
+    */
+    int32_t readRegister(Registers_e reg, uint8_t &value);
+
+private:
+
+    I2C m_i2cBus;
+
+};
+
+#endif /* __MAX30101_H_ */
+