Maxim Integrated / Mbed OS FTHR_USB_serial

USB serial demo passes data from virtual serial port to debug serial port

Dependencies:   max32630fthr USBDevice

Fork of FTHR_USB_serial by Greg Steiert

This program receives characters from the virtual USBSerial UART and sends them back out over the virtual USBSerial UART and the DapLink UART. It will also change the status of LED 1 based on the least significant bit of the character received.

The default baud rate for the DapLink UART is 9600, the baud rate does not affect the virtual USBSerial UART.

Windows Driver!

If you are using windows, go here for a driver:

https://docs.mbed.com/docs/mbed-os-handbook/en/latest/getting_started/what_need/#windows-serial-driver

To Build using mbed CLI and GCC ARM:

mbed compile -m MAX32630FTHR -t GCC_ARM

main.cpp

Committer:
switches
Date:
2017-02-06
Revision:
6:684c51f32c1d
Parent:
3:601c11238ccb
Child:
8:d2b660bf5f94

File content as of revision 6:684c51f32c1d:

#include "mbed.h"
#include "max32630fthr.h"
#include "USBSerial.h"

MAX32630FTHR pegasus(MAX32630FTHR::VIO_3V3);

// Hardware serial port over DAPLink
Serial daplink(P2_1, P2_0);

// Virtual serial port over USB
USBSerial microUSB;

DigitalOut rLED(LED1);
DigitalOut gLED(LED2);
DigitalOut bLED(LED3);

// main() runs in its own thread in the OS
// (note the calls to Thread::wait below for delays)
int main()
{
    int c;

    daplink.printf("daplink serial port\r\n");
    microUSB.printf("micro USB serial port\r\n");
    rLED = LED_ON;
    gLED = LED_ON;
    bLED = LED_OFF;

    rLED = LED_OFF;

    while(1) {
        c = microUSB.getc();
        microUSB.putc(c);
        daplink.putc(c);
        bLED = c & 1;
    }
}