Maxim Integrated / Mbed OS MAXREFDES155#

DeepCover Embedded Security in IoT: Public-key Secured Data Paths

Dependencies:   MaximInterface

The MAXREFDES155# is an internet-of-things (IoT) embedded-security reference design, built to authenticate and control a sensing node using elliptic-curve-based public-key cryptography with control and notification from a web server.

The hardware includes an ARM® mbed™ shield and attached sensor endpoint. The shield contains a DS2476 DeepCover® ECDSA/SHA-2 coprocessor, Wifi communication, LCD push-button controls, and status LEDs. The sensor endpoint is attached to the shield using a 300mm cable and contains a DS28C36 DeepCover ECDSA/SHA-2 authenticator, IR-thermal sensor, and aiming laser for the IR sensor. The MAXREFDES155# is equipped with a standard Arduino® form-factor shield connector for immediate testing using an mbed board such as the MAX32600MBED#. The combination of these two devices represent an IoT device. Communication to the web server is accomplished with the shield Wifi circuitry. Communication from the shield to the attached sensor module is accomplished over I2C . The sensor module represents an IoT endpoint that generates small data with a requirement for message authenticity/integrity and secure on/off operational control.

The design is hierarchical with each mbed platform and shield communicating data from the sensor node to a web server that maintains a centralized log and dispatches notifications as necessary. The simplicity of this design enables rapid integration into any star-topology IoT network to provide security with the low overhead and cost provided by the ECDSA-P256 asymmetric-key and SHA-256 symmetric-key algorithms.

More information about the MAXREFDES155# is available on the Maxim Integrated website.

Diff: rapidjson/error/en.h

Revision:
0:33d4e66780c0
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/rapidjson/error/en.h	Fri Feb 24 11:23:12 2017 -0600
@@ -0,0 +1,74 @@
+// Tencent is pleased to support the open source community by making RapidJSON available.
+// 
+// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
+//
+// Licensed under the MIT License (the "License"); you may not use this file except
+// in compliance with the License. You may obtain a copy of the License at
+//
+// http://opensource.org/licenses/MIT
+//
+// Unless required by applicable law or agreed to in writing, software distributed 
+// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
+// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
+// specific language governing permissions and limitations under the License.
+
+#ifndef RAPIDJSON_ERROR_EN_H_
+#define RAPIDJSON_ERROR_EN_H_
+
+#include "error.h"
+
+#ifdef __clang__
+RAPIDJSON_DIAG_PUSH
+RAPIDJSON_DIAG_OFF(switch-enum)
+RAPIDJSON_DIAG_OFF(covered-switch-default)
+#endif
+
+RAPIDJSON_NAMESPACE_BEGIN
+
+//! Maps error code of parsing into error message.
+/*!
+    \ingroup RAPIDJSON_ERRORS
+    \param parseErrorCode Error code obtained in parsing.
+    \return the error message.
+    \note User can make a copy of this function for localization.
+        Using switch-case is safer for future modification of error codes.
+*/
+inline const RAPIDJSON_ERROR_CHARTYPE* GetParseError_En(ParseErrorCode parseErrorCode) {
+    switch (parseErrorCode) {
+        case kParseErrorNone:                           return RAPIDJSON_ERROR_STRING("No error.");
+
+        case kParseErrorDocumentEmpty:                  return RAPIDJSON_ERROR_STRING("The document is empty.");
+        case kParseErrorDocumentRootNotSingular:        return RAPIDJSON_ERROR_STRING("The document root must not be followed by other values.");
+    
+        case kParseErrorValueInvalid:                   return RAPIDJSON_ERROR_STRING("Invalid value.");
+    
+        case kParseErrorObjectMissName:                 return RAPIDJSON_ERROR_STRING("Missing a name for object member.");
+        case kParseErrorObjectMissColon:                return RAPIDJSON_ERROR_STRING("Missing a colon after a name of object member.");
+        case kParseErrorObjectMissCommaOrCurlyBracket:  return RAPIDJSON_ERROR_STRING("Missing a comma or '}' after an object member.");
+    
+        case kParseErrorArrayMissCommaOrSquareBracket:  return RAPIDJSON_ERROR_STRING("Missing a comma or ']' after an array element.");
+
+        case kParseErrorStringUnicodeEscapeInvalidHex:  return RAPIDJSON_ERROR_STRING("Incorrect hex digit after \\u escape in string.");
+        case kParseErrorStringUnicodeSurrogateInvalid:  return RAPIDJSON_ERROR_STRING("The surrogate pair in string is invalid.");
+        case kParseErrorStringEscapeInvalid:            return RAPIDJSON_ERROR_STRING("Invalid escape character in string.");
+        case kParseErrorStringMissQuotationMark:        return RAPIDJSON_ERROR_STRING("Missing a closing quotation mark in string.");
+        case kParseErrorStringInvalidEncoding:          return RAPIDJSON_ERROR_STRING("Invalid encoding in string.");
+
+        case kParseErrorNumberTooBig:                   return RAPIDJSON_ERROR_STRING("Number too big to be stored in double.");
+        case kParseErrorNumberMissFraction:             return RAPIDJSON_ERROR_STRING("Miss fraction part in number.");
+        case kParseErrorNumberMissExponent:             return RAPIDJSON_ERROR_STRING("Miss exponent in number.");
+
+        case kParseErrorTermination:                    return RAPIDJSON_ERROR_STRING("Terminate parsing due to Handler error.");
+        case kParseErrorUnspecificSyntaxError:          return RAPIDJSON_ERROR_STRING("Unspecific syntax error.");
+
+        default:                                        return RAPIDJSON_ERROR_STRING("Unknown error.");
+    }
+}
+
+RAPIDJSON_NAMESPACE_END
+
+#ifdef __clang__
+RAPIDJSON_DIAG_POP
+#endif
+
+#endif // RAPIDJSON_ERROR_EN_H_