Example of AWS IoT connection and Web Dashboard thru STM32 Nucleo evaluation board and mbed OS.
Dependencies: X_NUCLEO_IKS01A1 mbed FP MQTTPacket DnsQuery ATParser
Introduction
The demo is aimed to STM32 Nucleo board with WiFi and sensors expansions. The board is a "thing" for the AWS IoT service. It updates IoT service shadow with sensors data every second and checks subscription messages.
Hardware Configuration
- NUCLEO-F401RE - Nucleo Development Board
- X-NUCLEO-IDW01M1 - Wi-Fi expansion board for STM32 Nucleo
- X-NUCLEO-IKS01A1 - Motion MEMS and environmental sensor expansion board for STM32 Nucleo
Software Configuration
- Import this Project to mbed online compiler
- Find the next part of code in main.cpp file ...
WiFi network credential
#include "mbed.h" // WiFi network credential #define SSID "" // Network must be visible otherwise it can't connect #define PASSW "" #error "Wifi SSID & password empty"
- ... And set it to your Network Name and Password. Do not forget to remove "#error" pragma line.
Information
Nucleo WiFi module is not the same as your smartphone or laptope - it is based on demo board. To avoid connection problems:
- Place Nucleo as close to WiFi hot spot as possible. Or...
- Turn on mobile hot spot in your laptop as close to the device as possible.
- Make sure that hot spot permits 2.4 GHz band communications
- Setup BackEnd and store certificates using this backend setup instruction
- Find AWS_IOT_MQTT_HOST define and change it to HTTPS point mentioned in your AWS IoT thing properties named "interact"
#define AWS_IOT_MQTT_HOST "xxxxxxxxxx.iot.us-east-1.amazonaws.com" //Use your own host.
- Find the certificate defines clientCRT and clientKey in main.cpp file and change it to ones provided by Amazon.
/********************************************************************************************** *********************************************************************************************** Device Identity Certificates: Modify for your AWS IoT Thing *********************************************************************************************** ***********************************************************************************************/ /**************************************** (somecode)-certificate.pem.crt - Amazon signed PEM sertificate. *****************************************/ //This Client cert is example. Use own instead. const uint8_t clientCRT[] = "\ -----BEGIN CERTIFICATE-----\n\ MIIDBjCCAe6gAwIBAgIUVph856omeIxW3UPioq+UrX1DbwowDQYJKoZIhvcNAQEL\ BQAwTTFLMEkGA1UECwxCQW1hem9uIFdlYiBTZXJ2aWNlcyBPPUFtYXpvbi5jb20g\ SW5jLiBMPVNlYXR0bGUgU1Q9V2FzaGluZ3RvbiBDPVVTMB4XDTE3MDUyNTExNTEy\ OVoXDTQ5MTIzMTIzNTk1OVowgZUxCzAJBgNVBAYTAkJZMQ4wDAYDVQQIDAVNaW5z\ azEOMAwGA1UEBwwFTWluc2sxFzAVBgNVBAoMDktsaWthLVRlY2ggTExDMRcwFQYD\ VQQLDA5LbGlrYS1UZWNoIExMQzEMMAoGA1UEAwwDUm5EMSYwJAYJKoZIhvcNAQkB\ FhdtdmF0YWxldUBrbGlrYS10ZWNoLmNvbTBZMBMGByqGSM49AgEGCCqGSM49AwEH\ A0IABCJgOQJmoTBJVPfli9Hm/JVixaxkY5rtlgrYO3hSl633A2hg0P/ue0wXDbF3\ aQ0X57IRFE4k4FEbr3UXjT/IczKjYDBeMB8GA1UdIwQYMBaAFK3YzTUPlYB2Li75\ i/z8rEogr1d6MB0GA1UdDgQWBBT18HXBaXFJuAR/0SwegnxJ+pyJ6TAMBgNVHRMB\ Af8EAjAAMA4GA1UdDwEB/wQEAwIHgDANBgkqhkiG9w0BAQsFAAOCAQEAb0Ux1aH5\ RLxjrfGqXN6rPVqh8QQRS+AyBfzmaQN8HaPZMkX5WxXLvcn0A3uWlwQxPPkcZ4zf\ 51GHtFFQWB4YZ8dx8mUQ0v/j7onHjCJgZ8iDgwOyKMGtnsDZWCakQw+a6cj+NrMZ\ tzhjwCzEEP6ePcbXwErI5OOzLuWns2L/JEr2wWNkokgRuS8ewr/SQ9OLWIWa2rFM\ ahPNTb3y/qBeWdjeJmhI+TOxdqIpsF8roWP25zwo/zkzCHCjXFBrL+0CA4MpxIl9\ x02i7aAhlJ6ys80lDxdeWeeQJXRKkGknP8mcmKn3iEqqJ5s1dQePj2b5d3ldatya\ wsxQBqqZXzIWEw==\ \n\ -----END CERTIFICATE-----\n"; /********************************************************************************************** *********************************************************************************************** Private Key: Modify for your AWS IoT Thing *********************************************************************************************** ***********************************************************************************************/ /********************************************************************8**************************************** nucleo.key.pem - client key generated according to readme. **************************************************************************************************************/ //This Client Key is example. Use own instead. const uint8_t clientKey[] ="\ -----BEGIN EC PARAMETERS-----\n\ BggqhkjOPQMBBw==\ -----END EC PARAMETERS-----\n\ -----BEGIN EC PRIVATE KEY-----\n\ MHcCAQEEIHPRfWSC8/k/BsqDWKuP15dXsI9fGwpkTIsLZe6mIrAAoAoGCCqGSM49\ AwEHoUQDQgAEImA5AmahMElU9+WL0eb8lWLFrGRjmu2WCtg7eFKXrfcDaGDQ/+57\ TBcNsXdpDRfnshEUTiTgURuvdReNP8hzMg==\ -----END EC PRIVATE KEY-----\n";
Build and Check
- Plugin your board to USB of your PC. USB Disk Drive and USB COM Port should appear in your system.
- Open any Serial Console, connect it to your USB Serial Port and setup speed equal to 115200.
- Compile this Project and save .bin file to USB Disk Drive
- After board reset you should see next log in serial console:
X-NUCLEO-IDW01M1 mbed Application connecting to AP LOG: int main() L#361 Connected to WiFI. LOG: int connect(MQTT::Client<MQTTWiFi, Countdown, 350, 5> *, MQTTWiFi *) L#186 ===================================== LOG: int connect(MQTT::Client<MQTTWiFi, Countdown, 350, 5> *, MQTTWiFi *) L#187 Connecting WiFi. LOG: int connect(MQTT::Client<MQTTWiFi, Countdown, 350, 5> *, MQTTWiFi *) L#188 Nucleo IP ADDRESS: X.X.X.X LOG: int connect(MQTT::Client<MQTTWiFi, Countdown, 350, 5> *, MQTTWiFi *) L#189 Nucleo MAC ADDRESS: 00:11:22:33:44:55 LOG: int connect(MQTT::Client<MQTTWiFi, Countdown, 350, 5> *, MQTTWiFi *) L#190 Server Hostname: xxxxxxxx.iot.us-east-1.amazonaws.com port: 8883 LOG: int connect(MQTT::Client<MQTTWiFi, Countdown, 350, 5> *, MQTTWiFi *) L#191 Client ID: Nucleo LOG: int connect(MQTT::Client<MQTTWiFi, Countdown, 350, 5> *, MQTTWiFi *) L#194 ===================================== LOG: int MQTTSocket::getNTPtime(int) L#58 Success receiving time from ntp server. Tick from 1 Jan 1970 is equal to 1505399292. --->TCP Connected --->MQTT Connected --->>>MQTT subscribed to: Nucleo/test Length - 245, Publishing {"state": {"reported": {"temperature": 23.690001, "humidity": 98.190002, "pressure": 982.869141, "accelerometer": [-0.009000, 0.030000, 0.971000], "gyroscope": [0.420000, -2.660000, 1.750000], "magnetometer": [-3.600000, -7.100000, 53.300000]}}} Length - 245, Publishing {"state": {"reported": {"temperature": 23.660000, "humidity": 98.010002, "pressure": 982.770264, "accelerometer": [-0.009000, 0.030000, 0.971000], "gyroscope": [0.770000, -2.310000, 1.470000], "magnetometer": [-3.100000, -8.300000, 54.200000]}}} Length - 245, Publishing {"state": {"reported": {"temperature": 23.670000, "humidity": 98.129997, "pressure": 982.724121, "accelerometer": [-0.008000, 0.029000, 0.971000], "gyroscope": [0.630000, -2.380000, 1.400000], "magnetometer": [-3.100000, -7.900000, 53.400000]}}} Length - 245, Publishing {"state": {"reported": {"temperature": 23.690001, "humidity": 98.019997, "pressure": 982.840088, "accelerometer": [-0.009000, 0.030000, 0.972000], "gyroscope": [0.700000, -2.450000, 1.540000], "magnetometer": [-3.700000, -7.900000, 53.400000]}}} Length - 245, Publishing {"state": {"reported": {"temperature": 23.709999, "humidity": 98.040001, "pressure": 982.828613, "accelerometer": [-0.009000, 0.030000, 0.971000], "gyroscope": [0.630000, -2.520000, 1.470000], "magnetometer": [-2.900000, -7.400000, 52.400000]}}} Length - 245, Publishing {"state": {"reported": {"temperature": 23.719999, "humidity": 97.860001, "pressure": 982.917236, "accelerometer": [-0.026000, 0.103000, 0.891000], "gyroscope": [1.050000, -2.310000, 1.260000], "magnetometer": [-3.300000, -7.100000, 53.500000]}}}
Information
Device connection state might be checked by Green Led on the board. Green light means that device is connected and transferring data to cloud.
- Configure and start your dashboard using instruction and corresponding sources from github
- Use Blue button to set up markers to charts.
- Use AWS IoT console MQTT Client to test device subscription to "Nucleo/test". Just publish any message to this topic and serial port output.
- PROFIT!
Diff: X_NUCLEO_IDW01M1v2/SpwfInterface.h
- Revision:
- 0:4cdaf9b1e7d0
- Child:
- 1:042ca9148926
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/X_NUCLEO_IDW01M1v2/SpwfInterface.h Wed Sep 27 14:40:52 2017 +0300 @@ -0,0 +1,99 @@ +/* mbed Microcontroller Library +* Copyright (c) 20015 ARM Limited +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +*/ + +/** + ****************************************************************************** + * @file SpwfInterface.h + * @author STMicroelectronics + * @brief Header file of the NetworkStack for the SPWF Device + ****************************************************************************** + * @copy + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2016 STMicroelectronics</center></h2> + ****************************************************************************** + */ + +#ifndef SPWFSA_INTERFACE_H +#define SPWFSA_INTERFACE_H + +#include "WiFiInterface.h" +#include "SPWFSA01.h" + +#define SPWFSA_SOCKET_COUNT 8 +#define SERVER_SOCKET_NO 9 + +/** SpwfSAInterface class + * Implementation of the NetworkStack for the SPWF Device + */ +class SpwfSAInterface : public NetworkStack, public WiFiInterface +{ +public: + SpwfSAInterface(PinName tx, PinName rx, bool debug); + SpwfSAInterface(PinName tx, PinName rx, PinName reset = PC_12, PinName wakeup = PC_8, bool debug = false); + virtual ~SpwfSAInterface(); + + // Implementation of WiFiInterface + virtual int connect(const char *ssid, + const char *pass, + nsapi_security_t security = NSAPI_SECURITY_NONE); + + inline int setSocketClientSecurity(uint8_t* tls_mode, uint8_t* root_ca_server, uint8_t* client_cert, uint8_t* client_key, uint8_t* client_domain, uint32_t tls_epoch_time) + { + return _spwf.setSocketClientSecurity(tls_mode, root_ca_server, client_cert, client_key, client_domain, tls_epoch_time); + } + + virtual int disconnect(); + virtual const char *get_mac_address(); + void debug(const char * string); + inline bool reset_chip() {return _spwf.hw_reset();}; + + //Implementation of NetworkStack + virtual const char *get_ip_address(); + +protected: + //Implementation of NetworkStack + virtual int socket_open(void **handle, nsapi_protocol_t proto); + virtual int socket_close(void *handle); + virtual int socket_bind(void *handle, const SocketAddress &address); //not supported + virtual int socket_listen(void *handle, int backlog); + virtual int socket_connect(void *handle, const SocketAddress &address); + virtual int socket_accept(void **handle, void *server); + virtual int socket_send(void *handle, const void *data, unsigned size); + virtual int socket_recv(void *handle, void *data, unsigned size); + virtual int socket_sendto(void *handle, const SocketAddress &address, const void *data, unsigned size); + virtual int socket_recvfrom(void *handle, SocketAddress *address, void *buffer, unsigned size); + virtual void socket_attach(void *handle, void (*callback)(void *), void *data); + virtual int setsockopt(void *handle, int level, int optname, const void *optval, unsigned optlen); + virtual int getsockopt(void *handle, int level, int optname, void *optval, unsigned *optlen); + +private: + int init(void); + + SPWFSA01 _spwf; + bool _ids[SPWFSA_SOCKET_COUNT]; + bool isListening; + bool isInitialized; +}; + + +#endif