SNIC UART Interface library for Murata Type-YD module
Dependents: WebSocketServerTest
Fork of SNICInterface_mod by
Diff: SNIC_WifiInterface.cpp
- Revision:
- 38:f13e4e563d65
- Parent:
- 37:f3a2053627c2
- Child:
- 39:a1233ca02edf
diff -r f3a2053627c2 -r f13e4e563d65 SNIC_WifiInterface.cpp --- a/SNIC_WifiInterface.cpp Tue Jun 24 06:24:23 2014 +0000 +++ b/SNIC_WifiInterface.cpp Wed Jun 25 00:04:11 2014 +0000 @@ -44,10 +44,10 @@ wait(1); /* Initialize SNIC API */ // Get buffer for response payload from MemoryPool - tagMEMPOOL_BLOCK_T *payload_buf = snic_core_p->allocCmdBuf(); - if( payload_buf == NULL ) + tagMEMPOOL_BLOCK_T *payload_buf_p = snic_core_p->allocCmdBuf(); + if( payload_buf_p == NULL ) { - printf("snic_init payload_buf NULL\r\n"); + printf("snic_init payload_buf_p NULL\r\n"); return -1; } @@ -58,14 +58,14 @@ req.buf_size[0] = 0x08; req.buf_size[1] = 0x00; - unsigned char *command_array = snic_core_p->getCommandBuf(); + unsigned char *command_array_p = snic_core_p->getCommandBuf(); unsigned int command_len; // Preparation of command command_len = snic_core_p->preparationSendCommand( UART_CMD_ID_SNIC, req.cmd_sid, (unsigned char *)&req - , sizeof(C_SNIC_Core::tagSNIC_INIT_REQ_T), payload_buf->buf, command_array ); + , sizeof(C_SNIC_Core::tagSNIC_INIT_REQ_T), payload_buf_p->buf, command_array_p ); // Send uart command request - snic_core_p->sendUart( command_len, command_array ); + snic_core_p->sendUart( command_len, command_array_p ); int ret; // Wait UART response @@ -73,7 +73,7 @@ if( ret != 0 ) { printf( "snic_init failed\r\n" ); - snic_core_p->freeCmdBuf( payload_buf ); + snic_core_p->freeCmdBuf( payload_buf_p ); return -1; } @@ -82,7 +82,7 @@ printf("snic_init status:%02x\r\n", uartCmdMgr_p->getCommandStatus()); ret = -1; } - snic_core_p->freeCmdBuf( payload_buf ); + snic_core_p->freeCmdBuf( payload_buf_p ); return ret; } @@ -93,10 +93,10 @@ C_SNIC_UartCommandManager *uartCmdMgr_p = snic_core_p->getUartCommand(); // Get buffer for response payload from MemoryPool - tagMEMPOOL_BLOCK_T *payload_buf = snic_core_p->allocCmdBuf(); - if( payload_buf == NULL ) + tagMEMPOOL_BLOCK_T *payload_buf_p = snic_core_p->allocCmdBuf(); + if( payload_buf_p == NULL ) { - printf("getFWVersion payload_buf NULL\r\n"); + printf("getFWVersion payload_buf_p NULL\r\n"); return -1; } @@ -105,32 +105,32 @@ req.cmd_sid = UART_CMD_SID_GEN_FW_VER_GET_REQ; req.seq = mUartRequestSeq++; - unsigned char *command_array = snic_core_p->getCommandBuf(); + unsigned char *command_array_p = snic_core_p->getCommandBuf(); unsigned int command_len; // Preparation of command command_len = snic_core_p->preparationSendCommand( UART_CMD_ID_GEN, req.cmd_sid, (unsigned char *)&req - , sizeof(C_SNIC_Core::tagGEN_FW_VER_GET_REQ_T), payload_buf->buf, command_array ); + , sizeof(C_SNIC_Core::tagGEN_FW_VER_GET_REQ_T), payload_buf_p->buf, command_array_p ); int ret; // Send uart command request - snic_core_p->sendUart( command_len, command_array ); + snic_core_p->sendUart( command_len, command_array_p ); // Wait UART response ret = uartCmdMgr_p->wait(); if( ret != 0 ) { printf( "getFWversion failed\r\n" ); - snic_core_p->freeCmdBuf( payload_buf ); + snic_core_p->freeCmdBuf( payload_buf_p ); return -1; } if( uartCmdMgr_p->getCommandStatus() == 0 ) { - unsigned char version_len = payload_buf->buf[3]; - memcpy( version_p, &payload_buf->buf[4], version_len ); + unsigned char version_len = payload_buf_p->buf[3]; + memcpy( version_p, &payload_buf_p->buf[4], version_len ); } - snic_core_p->freeCmdBuf( payload_buf ); + snic_core_p->freeCmdBuf( payload_buf_p ); return 0; } @@ -155,10 +155,10 @@ } // Get buffer for response payload from MemoryPool - tagMEMPOOL_BLOCK_T *payload_buf = snic_core_p->allocCmdBuf(); - if( payload_buf == NULL ) + tagMEMPOOL_BLOCK_T *payload_buf_p = snic_core_p->allocCmdBuf(); + if( payload_buf_p == NULL ) { - printf("connect payload_buf NULL\r\n"); + printf("connect payload_buf_p NULL\r\n"); return -1; } @@ -193,13 +193,13 @@ } } - unsigned char *command_array = snic_core_p->getCommandBuf(); + unsigned char *command_array_p = snic_core_p->getCommandBuf(); // Preparation of command command_len = snic_core_p->preparationSendCommand( UART_CMD_ID_WIFI, UART_CMD_SID_WIFI_JOIN_REQ, buf - , buf_len, payload_buf->buf, command_array ); + , buf_len, payload_buf_p->buf, command_array_p ); // Send uart command request - snic_core_p->sendUart( command_len, command_array ); + snic_core_p->sendUart( command_len, command_array_p ); int ret; // Wait UART response @@ -207,7 +207,7 @@ if( ret != 0 ) { printf( "join failed\r\n" ); - snic_core_p->freeCmdBuf( payload_buf ); + snic_core_p->freeCmdBuf( payload_buf_p ); return -1; } @@ -217,7 +217,7 @@ printf("join status:%02x\r\n", uartCmdMgr_p->getCommandStatus()); ret = -1; } - snic_core_p->freeCmdBuf( payload_buf ); + snic_core_p->freeCmdBuf( payload_buf_p ); return ret; } @@ -228,10 +228,10 @@ C_SNIC_UartCommandManager *uartCmdMgr_p = snic_core_p->getUartCommand(); // Get buffer for response payload from MemoryPool - tagMEMPOOL_BLOCK_T *payload_buf = snic_core_p->allocCmdBuf(); - if( payload_buf == NULL ) + tagMEMPOOL_BLOCK_T *payload_buf_p = snic_core_p->allocCmdBuf(); + if( payload_buf_p == NULL ) { - printf("disconnect payload_buf NULL\r\n"); + printf("disconnect payload_buf_p NULL\r\n"); return -1; } @@ -240,14 +240,14 @@ req.cmd_sid = UART_CMD_SID_WIFI_DISCONNECT_REQ; req.seq = mUartRequestSeq++; - unsigned char *command_array = snic_core_p->getCommandBuf(); + unsigned char *command_array_p = snic_core_p->getCommandBuf(); unsigned int command_len; // Preparation of command command_len = snic_core_p->preparationSendCommand( UART_CMD_ID_WIFI, req.cmd_sid, (unsigned char *)&req - , sizeof(C_SNIC_Core::tagWIFI_DISCONNECT_REQ_T), payload_buf->buf, command_array ); + , sizeof(C_SNIC_Core::tagWIFI_DISCONNECT_REQ_T), payload_buf_p->buf, command_array_p ); // Send uart command request - snic_core_p->sendUart( command_len, command_array ); + snic_core_p->sendUart( command_len, command_array_p ); int ret; // Wait UART response @@ -255,7 +255,7 @@ if( ret != 0 ) { printf( "disconnect failed\r\n" ); - snic_core_p->freeCmdBuf( payload_buf ); + snic_core_p->freeCmdBuf( payload_buf_p ); return -1; } @@ -264,7 +264,7 @@ printf("disconnect status:%02x\r\n", uartCmdMgr_p->getCommandStatus()); ret = -1; } - snic_core_p->freeCmdBuf( payload_buf ); + snic_core_p->freeCmdBuf( payload_buf_p ); return ret; } @@ -275,10 +275,10 @@ C_SNIC_UartCommandManager *uartCmdMgr_p = snic_core_p->getUartCommand(); // Get buffer for response payload from MemoryPool - tagMEMPOOL_BLOCK_T *payload_buf = snic_core_p->allocCmdBuf(); - if( payload_buf == NULL ) + tagMEMPOOL_BLOCK_T *payload_buf_p = snic_core_p->allocCmdBuf(); + if( payload_buf_p == NULL ) { - printf("scan payload_buf NULL\r\n"); + printf("scan payload_buf_p NULL\r\n"); return -1; } @@ -315,17 +315,17 @@ } buf_len++; - unsigned char *command_array = snic_core_p->getCommandBuf(); + unsigned char *command_array_p = snic_core_p->getCommandBuf(); unsigned int command_len; // Preparation of command command_len = snic_core_p->preparationSendCommand( UART_CMD_ID_WIFI, req.cmd_sid, (unsigned char *)&req - , buf_len, payload_buf->buf, command_array ); + , buf_len, payload_buf_p->buf, command_array_p ); // Set scan result callback uartCmdMgr_p->setScanResultHandler( result_handler_p ); // Send uart command request - snic_core_p->sendUart( command_len, command_array ); + snic_core_p->sendUart( command_len, command_array_p ); int ret; // Wait UART response @@ -334,7 +334,7 @@ if( ret != 0 ) { printf( "scan failed\r\n" ); - snic_core_p->freeCmdBuf( payload_buf ); + snic_core_p->freeCmdBuf( payload_buf_p ); return -1; } @@ -344,7 +344,7 @@ ret = -1; } - snic_core_p->freeCmdBuf( payload_buf ); + snic_core_p->freeCmdBuf( payload_buf_p ); return ret; } @@ -362,10 +362,10 @@ } // Get buffer for response payload from MemoryPool - tagMEMPOOL_BLOCK_T *payload_buf = snic_core_p->allocCmdBuf(); - if( payload_buf == NULL ) + tagMEMPOOL_BLOCK_T *payload_buf_p = snic_core_p->allocCmdBuf(); + if( payload_buf_p == NULL ) { - printf("wifi_on payload_buf NULL\r\n"); + printf("wifi_on payload_buf_p NULL\r\n"); return -1; } @@ -375,14 +375,14 @@ req.seq = mUartRequestSeq++; memcpy( req.country, country_p, COUNTRYC_CODE_LENTH ); - unsigned char *command_array = snic_core_p->getCommandBuf(); + unsigned char *command_array_p = snic_core_p->getCommandBuf(); unsigned int command_len; // Preparation of command command_len = snic_core_p->preparationSendCommand( UART_CMD_ID_WIFI, req.cmd_sid, (unsigned char *)&req - , sizeof(C_SNIC_Core::tagWIFI_ON_REQ_T), payload_buf->buf, command_array ); + , sizeof(C_SNIC_Core::tagWIFI_ON_REQ_T), payload_buf_p->buf, command_array_p ); // Send uart command request - snic_core_p->sendUart( command_len, command_array ); + snic_core_p->sendUart( command_len, command_array_p ); int ret; // Wait UART response @@ -390,7 +390,7 @@ if( ret != 0 ) { printf( "wifi_on failed\r\n" ); - snic_core_p->freeCmdBuf( payload_buf ); + snic_core_p->freeCmdBuf( payload_buf_p ); return -1; } @@ -399,7 +399,7 @@ printf("wifi_on status:%02x\r\n", uartCmdMgr_p->getCommandStatus()); ret = -1; } - snic_core_p->freeCmdBuf( payload_buf ); + snic_core_p->freeCmdBuf( payload_buf_p ); return ret; } @@ -410,10 +410,10 @@ C_SNIC_UartCommandManager *uartCmdMgr_p = snic_core_p->getUartCommand(); // Get buffer for response payload from MemoryPool - tagMEMPOOL_BLOCK_T *payload_buf = snic_core_p->allocCmdBuf(); - if( payload_buf == NULL ) + tagMEMPOOL_BLOCK_T *payload_buf_p = snic_core_p->allocCmdBuf(); + if( payload_buf_p == NULL ) { - printf("wifi_off payload_buf NULL\r\n"); + printf("wifi_off payload_buf_p NULL\r\n"); return -1; } @@ -422,14 +422,14 @@ req.cmd_sid = UART_CMD_SID_WIFI_OFF_REQ; req.seq = mUartRequestSeq++; - unsigned char *command_array = snic_core_p->getCommandBuf(); + unsigned char *command_array_p = snic_core_p->getCommandBuf(); unsigned int command_len; // Preparation of command command_len = snic_core_p->preparationSendCommand( UART_CMD_ID_WIFI, req.cmd_sid, (unsigned char *)&req - , sizeof(C_SNIC_Core::tagWIFI_OFF_REQ_T), payload_buf->buf, command_array ); + , sizeof(C_SNIC_Core::tagWIFI_OFF_REQ_T), payload_buf_p->buf, command_array_p ); // Send uart command request - snic_core_p->sendUart( command_len, command_array ); + snic_core_p->sendUart( command_len, command_array_p ); int ret; // Wait UART response @@ -437,7 +437,7 @@ if( ret != 0 ) { printf( "wifi_off failed\r\n" ); - snic_core_p->freeCmdBuf( payload_buf ); + snic_core_p->freeCmdBuf( payload_buf_p ); return -1; } @@ -446,7 +446,7 @@ printf("wifi_off status:%02x\r\n", uartCmdMgr_p->getCommandStatus()); ret = -1; } - snic_core_p->freeCmdBuf( payload_buf ); + snic_core_p->freeCmdBuf( payload_buf_p ); return ret; } @@ -462,10 +462,10 @@ } // Get buffer for response payload from MemoryPool - tagMEMPOOL_BLOCK_T *payload_buf = snic_core_p->allocCmdBuf(); - if( payload_buf == NULL ) + tagMEMPOOL_BLOCK_T *payload_buf_p = snic_core_p->allocCmdBuf(); + if( payload_buf_p == NULL ) { - printf("getRssi payload_buf NULL\r\n"); + printf("getRssi payload_buf_p NULL\r\n"); return -1; } @@ -475,27 +475,27 @@ req.cmd_sid = UART_CMD_SID_WIFI_GET_STA_RSSI_REQ; req.seq = mUartRequestSeq++; - unsigned char *command_array = snic_core_p->getCommandBuf(); + unsigned char *command_array_p = snic_core_p->getCommandBuf(); unsigned int command_len; command_len = snic_core_p->preparationSendCommand( UART_CMD_ID_WIFI, req.cmd_sid, (unsigned char *)&req - , sizeof(C_SNIC_Core::tagWIFI_GET_STA_RSSI_REQ_T), payload_buf->buf, command_array ); + , sizeof(C_SNIC_Core::tagWIFI_GET_STA_RSSI_REQ_T), payload_buf_p->buf, command_array_p ); int ret; // Send uart command request - snic_core_p->sendUart( command_len, command_array ); + snic_core_p->sendUart( command_len, command_array_p ); // Wait UART response ret = uartCmdMgr_p->wait(); if( ret != 0 ) { printf( "getRssi failed\r\n" ); - snic_core_p->freeCmdBuf( payload_buf ); + snic_core_p->freeCmdBuf( payload_buf_p ); return -1; } - *rssi_p = (signed char)payload_buf->buf[2]; + *rssi_p = (signed char)payload_buf_p->buf[2]; - snic_core_p->freeCmdBuf( payload_buf ); + snic_core_p->freeCmdBuf( payload_buf_p ); return 0; } @@ -511,10 +511,10 @@ } // Get buffer for response payload from MemoryPool - tagMEMPOOL_BLOCK_T *payload_buf = snic_core_p->allocCmdBuf(); - if( payload_buf == NULL ) + tagMEMPOOL_BLOCK_T *payload_buf_p = snic_core_p->allocCmdBuf(); + if( payload_buf_p == NULL ) { - printf("getWifiStatus payload_buf NULL\r\n"); + printf("getWifiStatus payload_buf_p NULL\r\n"); return -1; } @@ -524,13 +524,13 @@ req.seq = mUartRequestSeq++; req.interface = 0; - unsigned char *command_array = snic_core_p->getCommandBuf(); + unsigned char *command_array_p = snic_core_p->getCommandBuf(); unsigned int command_len; command_len = snic_core_p->preparationSendCommand( UART_CMD_ID_WIFI, req.cmd_sid, (unsigned char *)&req - , sizeof(C_SNIC_Core::tagWIFI_GET_STATUS_REQ_T), payload_buf->buf, command_array ); + , sizeof(C_SNIC_Core::tagWIFI_GET_STATUS_REQ_T), payload_buf_p->buf, command_array_p ); // Send uart command request - snic_core_p->sendUart( command_len, command_array ); + snic_core_p->sendUart( command_len, command_array_p ); int ret; // Wait UART response @@ -538,26 +538,26 @@ if( ret != 0 ) { printf( "getWifiStatus failed\r\n" ); - snic_core_p->freeCmdBuf( payload_buf ); + snic_core_p->freeCmdBuf( payload_buf_p ); return -1; } // set status - status_p->status = (E_WIFI_STATUS)payload_buf->buf[2]; + status_p->status = (E_WIFI_STATUS)payload_buf_p->buf[2]; // set Mac address if( status_p->status != e_STATUS_OFF ) { - memcpy( status_p->mac_address, &payload_buf->buf[3], BSSID_MAC_LENTH ); + memcpy( status_p->mac_address, &payload_buf_p->buf[3], BSSID_MAC_LENTH ); } // set SSID if( ( status_p->status == e_STA_JOINED ) || ( status_p->status == e_AP_STARTED ) ) { - memcpy( status_p->ssid, &payload_buf->buf[9], strlen( (char *)&payload_buf->buf[9]) ); + memcpy( status_p->ssid, &payload_buf_p->buf[9], strlen( (char *)&payload_buf_p->buf[9]) ); } - snic_core_p->freeCmdBuf( payload_buf ); + snic_core_p->freeCmdBuf( payload_buf_p ); return 0; } @@ -578,14 +578,14 @@ C_SNIC_UartCommandManager *uartCmdMgr_p = snic_core_p->getUartCommand(); // Get buffer for response payload from MemoryPool - tagMEMPOOL_BLOCK_T *payload_buf = snic_core_p->allocCmdBuf(); - if( payload_buf == NULL ) + tagMEMPOOL_BLOCK_T *payload_buf_p = snic_core_p->allocCmdBuf(); + if( payload_buf_p == NULL ) { - printf("setIPConfig payload_buf NULL\r\n"); + printf("setIPConfig payload_buf_p NULL\r\n"); return -1; } - unsigned char *command_array = snic_core_p->getCommandBuf(); + unsigned char *command_array_p = snic_core_p->getCommandBuf(); unsigned int command_len; if( is_DHCP == true ) { @@ -598,7 +598,7 @@ // Preparation of command command_len = snic_core_p->preparationSendCommand( UART_CMD_ID_SNIC, req.cmd_sid, (unsigned char *)&req - , sizeof(C_SNIC_Core::tagSNIC_IP_CONFIG_REQ_DHCP_T), payload_buf->buf, command_array ); + , sizeof(C_SNIC_Core::tagSNIC_IP_CONFIG_REQ_DHCP_T), payload_buf_p->buf, command_array_p ); } else { @@ -620,10 +620,10 @@ // Preparation of command command_len = snic_core_p->preparationSendCommand( UART_CMD_ID_SNIC, req.cmd_sid, (unsigned char *)&req - , sizeof(C_SNIC_Core::tagSNIC_IP_CONFIG_REQ_STATIC_T), payload_buf->buf, command_array ); + , sizeof(C_SNIC_Core::tagSNIC_IP_CONFIG_REQ_STATIC_T), payload_buf_p->buf, command_array_p ); } // Send uart command request - snic_core_p->sendUart( command_len, command_array ); + snic_core_p->sendUart( command_len, command_array_p ); int ret; // Wait UART response @@ -631,7 +631,7 @@ if( ret != 0 ) { printf( "setIPConfig failed\r\n" ); - snic_core_p->freeCmdBuf( payload_buf ); + snic_core_p->freeCmdBuf( payload_buf_p ); return -1; } @@ -641,6 +641,6 @@ ret = -1; } - snic_core_p->freeCmdBuf( payload_buf ); + snic_core_p->freeCmdBuf( payload_buf_p ); return ret; }