Diff: main.cpp

Revision:

4:0ebd5e43da47

Parent:

3:436ef162bf2d

Child:

5:46dd21736d36

--- a/main.cpp	Thu Nov 06 06:56:04 2014 +0000
+++ b/main.cpp	Fri Nov 07 23:34:15 2014 +0000
@@ -1,91 +1,21 @@
 #include "mbed.h"
-#include "BLEDevice.h"
- 
-#include "UARTService.h"
- 
-#define NEED_CONSOLE_OUTPUT 1 /* Set this if you need debug messages on the console;
-                               * it will have an impact on code-size and power consumption. */
 
+DigitalOut myled(LED1);
+DigitalOut power(P0_0); // brown
+
+AnalogIn tempPin(P0_1); // purple
+float temp;
 Serial pc(USBTX, USBRX);
 
-#if NEED_CONSOLE_OUTPUT
-#define DEBUG(...) { pc.printf(__VA_ARGS__); }
-#else
-#define DEBUG(...) /* nothing */
-#endif /* #if NEED_CONSOLE_OUTPUT */
- 
-BLEDevice  ble;
-DigitalOut led1(LED1);
-DigitalOut led2(LED2);
 
-DigitalOut powerSwitch(P0_0);
- 
-AnalogIn tempPin(P0_2);
- 
-UARTService *uartServicePtr;
- 
-void disconnectionCallback(Gap::Handle_t handle, Gap::DisconnectionReason_t reason)
-{
-    DEBUG("Disconnected!\n\r");
-    DEBUG("Restarting the advertising process\n\r");
-    ble.startAdvertising();
-}
- 
-void onDataWritten(const GattCharacteristicWriteCBParams *params)
-{
-    if ((uartServicePtr != NULL) && (params->charHandle == uartServicePtr->getTXCharacteristicHandle())) {
-        float temp = tempPin.read(); // temperature, not temporary
-
-        uint16_t bytesRead = params->len;
-        DEBUG("received %u bytes\n\r", bytesRead);
-        DEBUG("first byte received: %u\n\r", params->data[0]);
-        uint8_t on = '1';
-        uint8_t off = '0';
-        if (params->data[0] == on) {
-            led2 = 1;
-            powerSwitch = 1;
-        } else if (params->data[0] == off) {
-            led2 = 0;
-            powerSwitch = 0;
-        }
-        ble.updateCharacteristicValue(uartServicePtr->getRXCharacteristicHandle(), params->data, bytesRead);
+int main() {
+    while(1) {
+        myled = 1;
+        wait(0.2);
+        myled = 0;
+        wait(0.2);
+        power = 1;
+        temp = tempPin.read();
+        pc.printf("%f\n",temp);
     }
 }
- 
-void periodicCallback(void)
-{
-    led1 = !led1;
-}
- 
-int main(void)
-{
-    led1 = 1;
-    led2 = 0;
-    powerSwitch = 0;
-    Ticker ticker;
-    ticker.attach(periodicCallback, 1);
- 
-    DEBUG("Initialising the nRF51822\n\r");
-    ble.init();
-    ble.onDisconnection(disconnectionCallback);
-    ble.onDataWritten(onDataWritten);
- 
-    /* setup advertising */
-    ble.accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED);
-    ble.setAdvertisingType(GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED);
-    ble.accumulateAdvertisingPayload(GapAdvertisingData::SHORTENED_LOCAL_NAME,
-                                     (const uint8_t *)"pgao", sizeof("pgao") - 1);
-    ble.accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LIST_128BIT_SERVICE_IDS,
-                                     (const uint8_t *)UARTServiceUUID_reversed, sizeof(UARTServiceUUID_reversed));
- 
-    ble.setAdvertisingInterval(160); /* 100ms; in multiples of 0.625ms. */
-    ble.startAdvertising();
- 
-    UARTService uartService(ble);
-    uartServicePtr = &uartService;
- 
-    while (true) {
-        ble.waitForEvent();
-    }
-}
- 
\ No newline at end of file