IONX
Update version of EALib.
Dependencies: FATFileSystem
Diff: QSPIFileSystem.cpp
- Revision:
- 0:0fdadbc3d852
- Child:
- 8:fe3cb3fbb64e
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/QSPIFileSystem.cpp Thu Sep 26 06:37:02 2013 +0000
@@ -0,0 +1,1499 @@
+#include "QSPIFileSystem.h"
+#include "mbed_debug.h"
+
+#include "spifi_rom_api.h"
+
+/******************************************************************************
+ * Defines and typedefs
+ *****************************************************************************/
+
+#define QSPI_DBG 0
+
+/*
+ * The SPIFI_ROM_PTR (0x1FFF1FF8) points to an area where the pointers to
+ * different drivers in ROM are stored.
+ */
+typedef struct {
+ /*const*/ unsigned p_usbd; // USBROMD
+ /*const*/ unsigned p_clib;
+ /*const*/ unsigned p_cand;
+ /*const*/ unsigned p_pwrd; // PWRROMD
+ /*const*/ unsigned p_promd; // DIVROMD
+ /*const*/ SPIFI_RTNS *pSPIFID; // SPIFIROMD
+ /*const*/ unsigned p_dev3;
+ /*const*/ unsigned p_dev4;
+} ROM;
+
+#define ROM_DRIVERS_PTR ((ROM *)(*((unsigned int *)SPIFI_ROM_PTR)))
+#define IS_ADDR_IN_SPIFI(__addr) ( (((uint32_t)(__addr)) & 0xff000000) == SPIFI_MEM_BASE )
+
+#define MEM_SIZE (memInfo.memSize) //(8*1024*1024)
+#define ERASE_SIZE (memInfo.eraseBlockSize) //(64*1024)
+#define NUM_BLOCKS (memInfo.numEraseBlocks) //(MEM_SIZE/ERASE_SIZE)
+
+typedef uint32_t toc_entry_t;
+
+#define TOC_BLOCK_ADDR (memInfo.tocBlockAddr) //(SPIFI_MEM_BASE + (NUM_BLOCKS - 1)*ERASE_SIZE)
+#define TOC_SIZE (memInfo.tocSizeInBytes) //(sizeof(toc_entry_t) * NUM_BLOCKS)
+#define NUM_TOCS (memInfo.numTocs) //((int)(ERASE_SIZE/TOC_SIZE))
+#define NUM_TOC_BLOCKS ((NUM_TOCS * TOC_SIZE) / ERASE_SIZE)
+#define NUM_TOC_ENTRIES ((int)(TOC_SIZE/sizeof(toc_entry_t)))
+
+#define TOC_UNUSED (0xffffffff)
+#define TOC_MAX (NUM_BLOCKS - 1)
+#define TOC_VALID_MASK (1UL<<31)
+#define TOC_RESERVED_MASK (1UL<<30)
+#define TOC_USED_MASK (1UL<<29)
+#define TOC_FILE_MASK (1UL<<28)
+#define TOC_FSIZE_MASK (0x3ffff)
+#define TOC_MANDAT_SET_MASK (0x0ffc0000)
+
+#define MANDATORY_BITS_SET(__v) (((__v)&TOC_MANDAT_SET_MASK) == TOC_MANDAT_SET_MASK)
+
+#define VALID_TOC_ENTRY(__v) (((__v)&TOC_VALID_MASK) == 0)
+#define USED_TOC_ENTRY(__v) (VALID_TOC_ENTRY(__v) && (((__v)&TOC_USED_MASK) == 0))
+#define TOC_IS_FILE(__v) (USED_TOC_ENTRY(__v) && (((__v)&TOC_FILE_MASK) == 0))
+#define TOC_IS_RESERVED(__v) (VALID_TOC_ENTRY(__v) && (((__v)&TOC_RESERVED_MASK) == 0))
+#define FILESIZE(__v) ((__v) & 0x3ffff)
+
+#define FS_MIN(__a, __b) (((__a) < (__b)) ? (__a) : (__b))
+
+// Mask to compare the different access modes. In LPCXpresso this was defined
+// but not in uVision
+#ifndef O_ACCMODE
+#define O_ACCMODE (O_RDONLY | O_WRONLY | O_RDWR)
+#endif
+
+
+/*
+ * The file header currently only consists of the filename (including path)
+ * and the string terminating character, but by separating the file name
+ * length from the size of the header in the code it allows future additions
+ * to the header without too much code modification.
+ */
+#define HEADER_DNAME_MAXLEN (250)
+#define HEADER_FNAME_STRLEN (HEADER_DNAME_MAXLEN + 5)
+#define HEADER_FNAME_LEN (HEADER_FNAME_STRLEN + 1)
+#define HEADER_LEN (HEADER_FNAME_LEN) // only filename in header for now
+
+typedef enum
+{
+ FS_OK,
+ FS_ERR_NOT_FORMATTED,
+ FS_ERR_NO_FILE,
+ FS_ERR_FILE_EXIST,
+ FS_ERR_INVALID_PARAM,
+ FS_ERR_DISK_FULL,
+ FS_ERR_SPIFI,
+ FS_ERR_MALLOC,
+
+ // FS_ERR_SPIFI_* return codes are listed in the User's Manual
+ // as possible return values from spifi_init(), spifi_program()
+ // and spifi_erase() calls.
+ FS_ERR_SPIFI_INTERNAL_ERROR = 0x20002, // 0x20002, Internal error in API code
+ FS_ERR_SPIFI_TIMEOUT = 0x20003, // 0x20003, Time-out waiting for program or erase to begin: protection could not be removed.
+ FS_ERR_SPIFI_OPERAND = 0x20004, // 0x20004, Operand error (i.e. invalid params)
+ FS_ERR_SPIFI_STATUS = 0x20005, // 0x20005, Device status error
+ FS_ERR_SPIFI_EXT_DEVICE_ID = 0x20006, // 0x20006, Unknown extended device ID value
+ FS_ERR_SPIFI_DEVICE_ID = 0x20007, // 0x20007, Unknown device ID code
+ FS_ERR_SPIFI_DEVICE_TYPE = 0x20008, // 0x20008, Unknown device type code
+ FS_ERR_SPIFI_MANUFACTURER = 0x20009, // 0x20009, Unknown manufacturer code
+ FS_ERR_SPIFI_INVALID_JDEC_ID = 0x2000A, // 0x2000A, No operative serial flash (JEDEC ID all zeroes or all ones)
+ FS_ERR_SPIFI_ERASE_CONFLICT = 0x2000B, // 0x2000B, S_CALLER_ERASE is included in options, and erasure is required.
+ FS_ERR_SPIFI_VERIFICATION, // other, Other non-zero values can occur if options selects verification.
+ // They will be the address in the SPIFI memory area at which the first discrepancy was found.
+} fresult;
+
+// The number of times to re-attempt a spifi_program() or spifi_erase()
+// if the last one reported a verification error.
+#define NUM_VERIFICATION_ATTEMPTS (1)
+
+typedef struct
+{
+ uint32_t memSize;
+ uint32_t eraseBlockSize;
+ uint32_t numEraseBlocks;
+ uint32_t tocBlockAddr;
+ uint32_t numTocs;
+ uint32_t tocSizeInBytes;
+ char memName[30];
+} meminfo_t;
+
+typedef struct
+{
+ int tocIdx;
+ uint32_t size;
+ uint16_t lastBlock;
+} fileHandle_t;
+
+/******************************************************************************
+ * Local variables
+ *****************************************************************************/
+
+static toc_entry_t* TOC = NULL;//[NUM_BLOCKS];
+static int activeTOC = -1;
+
+static const SPIFI_RTNS *spifi = NULL;
+static SPIFIobj obj;
+static SPIFIopers opers;
+
+static char addr_conflict_buff[PROG_SIZE];
+
+static meminfo_t memInfo = {0,0,0,0,0,0,{0}};
+
+/******************************************************************************
+ * Forward Declarations of Local Functions
+ *****************************************************************************/
+static fresult qspifs_init();
+static fresult qspifs_translateSpifiError(int rc);
+static fresult qspifs_readTOC(void);
+static fresult qspifs_saveTOC(void);
+static fresult qspifs_findFile(const char* filename, fileHandle_t* fh);
+static fresult qspifs_fileSize(int tocIdx, uint32_t* pSize);
+static fresult qspifs_eraseBlock(int block);
+static fresult qspifs_allocateFile(const char* filename, int neededBlocks, int* pTocIdx);
+static void qspifs_deleteFile(fileHandle_t* fh);
+static fresult qspifs_allocateSpace(fileHandle_t* fh, uint32_t size);
+static fresult qspifs_format(unsigned int minReservedBytes);
+static fresult qspifs_write(fileHandle_t* fh, const uint8_t * const pData, uint32_t size);
+static bool qspifs_startsWith(const char* prefix, const char* str);
+
+/******************************************************************************
+ * Local Functions
+ *****************************************************************************/
+
+/******************************************************************************
+ *
+ * Description:
+ * Initializes spifi, identifies the chip and reads the file system's
+ * table of content.
+ *
+ * Params:
+ * None
+ *
+ * Returns:
+ * FS_OK or one of the FS_ERR_* error codes
+ *
+ *****************************************************************************/
+static fresult qspifs_init()
+{
+ if (spifi == NULL) {
+
+ // Turn on SPIFI block as it is disabled on reset
+ LPC_SC->PCONP |= 0x00010000;
+
+ // pinsel for SPIFI
+ LPC_IOCON->P2_7 = 5; /* SPIFI_CSN @ P2.7 */
+ LPC_IOCON->P0_22 = 5; /* SPIFI_CLK @ P0.22 */
+ LPC_IOCON->P0_15 = 5; /* SPIFI_IO2 @ P0.15 */
+ LPC_IOCON->P0_16 = 5; /* SPIFI_IO3 @ P0.16 */
+ LPC_IOCON->P0_17 = 5; /* SPIFI_IO1 @ P0.17 */
+ LPC_IOCON->P0_18 = 5; /* SPIFI_IO0 @ P0.18 */
+
+ uint32_t spifi_clk_div = (*((volatile uint32_t*)0x400FC1B4)) & 0x1f;
+ uint32_t spifi_clk_mhz = (SystemCoreClock / spifi_clk_div) / 1000000;
+
+ spifi = ROM_DRIVERS_PTR->pSPIFID;
+
+ /* Typical time tCS is 20 ns min, we give 200 ns to be on safer side */
+ int rc = spifi->spifi_init (&obj, spifi_clk_mhz/5, S_FULLCLK+S_RCVCLK, spifi_clk_mhz);
+ if (rc) {
+ spifi = NULL;
+ return qspifs_translateSpifiError(rc);
+ }
+
+ /* Make sure it is a tested flash module */
+ if ((obj.mfger == 1) && (obj.devType == 0x2) && (obj.devID == 0x15) && (obj.memSize > 0x100000))
+ {
+ /* For the Spansion memory the TOC occupies 256bytes and the TOC block will
+ hold 256 TOCs. */
+ strcpy(memInfo.memName, "Spansion S25FL032");
+ memInfo.memSize = obj.memSize;
+ memInfo.eraseBlockSize = 64*1024;
+ memInfo.numEraseBlocks = memInfo.memSize / memInfo.eraseBlockSize;
+ memInfo.tocSizeInBytes = sizeof(toc_entry_t) * memInfo.numEraseBlocks;
+ memInfo.numTocs = memInfo.eraseBlockSize / memInfo.tocSizeInBytes;
+ memInfo.tocBlockAddr = SPIFI_MEM_BASE + (NUM_BLOCKS * ERASE_SIZE) - (memInfo.numTocs * memInfo.tocSizeInBytes);
+ }
+ else if ((obj.mfger == 0xef) && (obj.devType == 0x40) && (obj.devID == 0x17) && (obj.memSize > 0x100000))
+ {
+ /* For the Winbond memory the TOC occupies 8192 bytes and that is bigger than
+ one erase block (which is 4096 bytes). It is possible to either keep only
+ one TOC or to create a couple to reduce wear on the memory. In this case
+ the multiple TOCs option is used. */
+ strcpy(memInfo.memName, "Winbond W25Q64FV");
+ memInfo.memSize = obj.memSize;
+ memInfo.eraseBlockSize = 4*1024;
+ memInfo.numEraseBlocks = memInfo.memSize / memInfo.eraseBlockSize;
+ memInfo.tocSizeInBytes = sizeof(toc_entry_t) * memInfo.numEraseBlocks;
+ memInfo.numTocs = 8;
+ memInfo.tocBlockAddr = SPIFI_MEM_BASE + (NUM_BLOCKS * ERASE_SIZE) - (memInfo.numTocs * memInfo.tocSizeInBytes);
+ }
+ else
+ {
+ debug("INIT: Memory is unknown and may not work as expected\n");
+
+ // Asuming it has 64Kb erase blocks (i.e. same setup as the Spansion S25FL032
+ strcpy(memInfo.memName, "Unknown - check ID");
+ memInfo.memSize = obj.memSize;
+ memInfo.eraseBlockSize = 64*1024;
+ memInfo.numEraseBlocks = memInfo.memSize / memInfo.eraseBlockSize;
+ memInfo.tocSizeInBytes = sizeof(toc_entry_t) * memInfo.numEraseBlocks;
+ memInfo.numTocs = memInfo.eraseBlockSize / memInfo.tocSizeInBytes;
+ memInfo.tocBlockAddr = SPIFI_MEM_BASE + (NUM_BLOCKS * ERASE_SIZE) - (memInfo.numTocs * memInfo.tocSizeInBytes);
+
+ /*
+ * If this happens, check the manufacturer and device information
+ * and compare with the data sheet for your chip. Also make sure
+ * that the sector sizes are the same (i.e. 64KB) for your chip.
+ * If everything is the same then add an exception for your chip.
+ */
+ }
+ debug_if(QSPI_DBG, "INIT: Found %dMB %s\n", memInfo.memSize/0x100000, memInfo.memName);
+
+ if (TOC != NULL) {
+ delete TOC;
+ }
+ TOC = (toc_entry_t*)malloc(TOC_SIZE);
+ if (TOC == NULL) {
+ debug_if(QSPI_DBG, "INIT: Failed to allocate memory for TOC\n");
+ spifi = NULL;
+ return FS_ERR_MALLOC;
+ }
+ }
+ if (activeTOC == -1)
+ {
+ return qspifs_readTOC();
+ }
+ return FS_OK;
+}
+
+/******************************************************************************
+ *
+ * Description:
+ * Converts the return value from one of the spifi_init(), spifi_program()
+ * or spifi_erase() calls into a FS_* error code to simplify it for the
+ * fs_qspi API user.
+ * This function also attempts to detect the verification failure error.
+ * When a verification error occurs the spifi_* functions returns the
+ * conflicting address and not an error code. As this can be any address
+ * it is difficult to test but this function converts it into the
+ * FS_ERR_SPIFI_VERIFICATION error code which can be tested against.
+ *
+ * Params:
+ * [in] rc - The return code from any of the spifi_* functions
+ *
+ * Returns:
+ * FS_OK or one of the FS_ERR_* error codes
+ *
+ *****************************************************************************/
+static fresult qspifs_translateSpifiError(int rc)
+{
+ fresult res;
+ if (rc == 0)
+ {
+ res = FS_OK;
+ }
+ else if ((rc >= FS_ERR_SPIFI_INTERNAL_ERROR) && (rc <= FS_ERR_SPIFI_ERASE_CONFLICT))
+ {
+ // This is a known error code
+ res = (fresult)rc;
+ }
+ else if (opers.options & (S_VERIFY_PROG | S_VERIFY_ERASE))
+ {
+ // As verification was selected and rc is not in the list of known
+ // codes this falls into this category in the User's Manual:
+ //
+ // "Other non-zero values can occur if options selects verification.
+ // They will be the address in the SPIFI memory area at which the
+ // first discrepancy was found."
+ res = FS_ERR_SPIFI_VERIFICATION;
+ }
+ else
+ {
+ // Should never happen :-) as all listed error codes are covered but
+ // to be on the safe side and not interpret this as a success, a generic
+ // error is set.
+ res = FS_ERR_SPIFI;
+ }
+ return res;
+}
+
+/******************************************************************************
+ *
+ * Description:
+ * Reads the table of contents (TOC). The TOC is stored in the last erase
+ * block on the QSPI flash. As the QSPI flash is not exactly RW (might
+ * require erasing before writing) the TOC is relocated inside the erase
+ * block everytime it is saved (see saveTOC()). The currently valid TOC
+ * is allways the last one stored.
+ *
+ * Params:
+ * None
+ *
+ * Returns:
+ * FS_OK or one of the FS_ERR_* error codes
+ *
+ *****************************************************************************/
+static fresult qspifs_readTOC(void)
+{
+ int i, j;
+ toc_entry_t* p;
+ uint8_t invalid = 0;
+ int lastValid = -1;
+
+ // Search for the first unused TOC, keeping track of the valid
+ // ones as we go.
+ for (i = 0; (i < NUM_TOCS) && !invalid; i++)
+ {
+ p = (toc_entry_t*)(TOC_BLOCK_ADDR + i*TOC_SIZE);
+ for (j = 0; j < NUM_BLOCKS; j++)
+ {
+ if (!VALID_TOC_ENTRY(*p) || !MANDATORY_BITS_SET(*p))
+ {
+ // invalid TOC entry, stop looking
+ invalid = 1;
+ break;
+ }
+ p++;
+ }
+
+ if (!invalid)
+ {
+ // this TOC was ok, but perhaps there is a newer one?
+ lastValid = i;
+ }
+ }
+
+ if (lastValid == -1)
+ {
+ // no valid TOCs on the flash
+ return FS_ERR_NOT_FORMATTED;
+ }
+ else
+ {
+ // previous entry was ok so use that
+ activeTOC = lastValid;
+ p = (toc_entry_t*)(TOC_BLOCK_ADDR + activeTOC*TOC_SIZE);
+ memcpy(TOC, p, TOC_SIZE);
+ return FS_OK;
+ }
+}
+
+/******************************************************************************
+ *
+ * Description:
+ * Saves the table of contents (TOC). The TOC is stored in the last erase
+ * block on the QSPI flash. As the QSPI flash is not exactly RW (might
+ * require erasing before writing) the TOC is first compared with what is
+ * stored in the QSPI flash and if there are no changes or all changes
+ * only require bit changes 1->0 then the current TOC can be overwritten.
+ * If bit value changes 0->1 are required then the current stored TOC
+ * cannot be overwritten and the new TOC is instead stored in the next
+ * available space. If the entire last block is filled then it is erased
+ * and the new TOC is placed at the start of it.
+ *
+ * Params:
+ * None
+ *
+ * Returns:
+ * FS_OK or one of the FS_ERR_* error codes
+ *
+ *****************************************************************************/
+static fresult qspifs_saveTOC(void)
+{
+ int i, rc = 0;
+ uint32_t* pSrc;
+ uint32_t* pDest;
+ uint32_t tmp;
+ uint8_t identical = 1;
+
+ // active TOC same as the one we want to save?
+ pSrc = (uint32_t*)TOC;
+ pDest = (uint32_t*)(TOC_BLOCK_ADDR + activeTOC*TOC_SIZE);
+ for (i = 0; i < NUM_TOC_ENTRIES; i++)
+ {
+ if (*pSrc != *pDest)
+ {
+ identical = 0;
+ tmp = ((*pDest) ^ (*pSrc)) & (*pSrc);
+ if (tmp > 0)
+ {
+ // found a change that contains 0->1 bit modification which
+ // requires erasing or a new location
+ activeTOC = (activeTOC + 1)%NUM_TOCS;
+ if (activeTOC == 0)
+ {
+ // no more free TOCs so an erase is needed
+#if 0
+ opers.options &= ~S_CALLER_ERASE;
+ opers.options |= S_FORCE_ERASE;
+#else
+ opers.dest = (char *) TOC_BLOCK_ADDR;
+ opers.length = TOC_SIZE * NUM_TOCS;
+ opers.scratch = NULL;
+ opers.protect = 0;
+ opers.options = S_NO_VERIFY;
+ rc = spifi->spifi_erase(&obj, &opers);
+ if (rc) {
+ return qspifs_translateSpifiError(rc);
+ }
+#endif
+ }
+ break;
+ }
+ }
+ pSrc++;
+ pDest++;
+ }
+
+ if (!identical)
+ {
+ opers.length = FS_MIN(TOC_SIZE, PROG_SIZE);
+ opers.scratch = NULL;
+ opers.protect = 0;
+ opers.options = S_VERIFY_PROG | S_CALLER_ERASE;
+ for (int i = 0; i < (TOC_SIZE / PROG_SIZE); i++)
+ {
+ opers.dest = (char *)(TOC_BLOCK_ADDR + activeTOC*TOC_SIZE + i*PROG_SIZE);
+ rc = spifi->spifi_program(&obj, ((char*)TOC)+i*PROG_SIZE, &opers);
+ if (rc)
+ {
+ break;
+ }
+ }
+ return qspifs_translateSpifiError(rc);
+ }
+ return FS_OK;
+}
+
+/******************************************************************************
+ *
+ * Description:
+ * Searches the file system for a file with the specified name and
+ * (if found) returns the file's position in the TOC.
+ *
+ * Note that the content of fh is only valid if FS_OK is returned.
+ *
+ * Params:
+ * [in] filename - The name of the file to find
+ * [out] fh - The handle with the file information
+ *
+ * Returns:
+ * FS_OK or one of the FS_ERR_* error codes
+ *
+ *****************************************************************************/
+static fresult qspifs_findFile(const char* filename, fileHandle_t* fh)
+{
+ int i;
+
+ if (activeTOC == -1)
+ {
+ return FS_ERR_NOT_FORMATTED;
+ }
+
+ // Look at all blocks except for the reserved ones
+ for (i = 0; i < NUM_BLOCKS; i++)
+ {
+ if (TOC_IS_FILE(TOC[i]) && !TOC_IS_RESERVED(TOC[i]))
+ {
+ // found a file, see if name matches
+ char* p = (char*)(SPIFI_MEM_BASE + i*ERASE_SIZE);
+ if (strncmp(filename, p, HEADER_FNAME_LEN) == 0)
+ {
+ // found a matching name
+ fh->tocIdx = i;
+ fresult res = qspifs_fileSize(fh->tocIdx, &fh->size);
+ if (res == FS_OK) {
+ fh->lastBlock = fh->tocIdx + ((fh->size + HEADER_LEN)/ ERASE_SIZE);
+ }
+ return FS_OK;
+ }
+ }
+ }
+ return FS_ERR_NO_FILE;
+}
+
+/******************************************************************************
+ *
+ * Description:
+ * Calculates and returns the file's size.
+ *
+ * Note that the content of pSize is only valid if FS_OK is returned.
+ *
+ * Params:
+ * [in] tocIdx - The file's position in the TOC
+ * [out] pSize - The file's size
+ *
+ * Returns:
+ * FS_OK or one of the FS_ERR_* error codes
+ *
+ *****************************************************************************/
+static fresult qspifs_fileSize(int tocIdx, uint32_t* pSize)
+{
+ int i;
+
+ if (tocIdx < 0 || tocIdx > NUM_BLOCKS || !TOC_IS_FILE(TOC[tocIdx]))
+ {
+ return FS_ERR_NO_FILE;
+ }
+
+ *pSize = 0;
+
+ // A file is always stored in sequential blocks so start with the files
+ // first block and as long as it is full continue sum up the occupied
+ // block sizes. As soon as a non-full block is found that must be the
+ // file's last block.
+ for (i = tocIdx; i < NUM_BLOCKS; i++)
+ {
+ *pSize += FILESIZE(TOC[i]);
+ if (FILESIZE(TOC[i]) < ERASE_SIZE)
+ {
+ // last block in chain
+ break;
+ }
+ }
+
+ // Remove the filename header from the file's size
+ *pSize -= HEADER_LEN;
+
+ return FS_OK;
+}
+
+/******************************************************************************
+ *
+ * Description:
+ * Erases everything in one block on the QSPI flash.
+ *
+ * Params:
+ * [in] block - The block's number
+ *
+ * Returns:
+ * FS_OK or one of the FS_ERR_* error codes
+ *
+ *****************************************************************************/
+static fresult qspifs_eraseBlock(int block)
+{
+ opers.dest = (char *)(block * ERASE_SIZE);
+ opers.length = ERASE_SIZE;
+ opers.scratch = NULL;
+ opers.protect = 0;
+ opers.options = S_NO_VERIFY;
+ return qspifs_translateSpifiError(spifi->spifi_erase (&obj, &opers));
+}
+
+/******************************************************************************
+ *
+ * Description:
+ * Creates a new file if there is enough space for it on the file system.
+ * The TOC is searched for a unused sequence of blocks of at least the
+ * needed size. That block is marked as used and the file's name is stored
+ * in the first bytes of the file's first block.
+ *
+ * Note: The filename will not be tested for uniqueness.
+ * Note: The value of pTocIdx will only be valid if FS_OK is returned.
+ *
+ * Params:
+ * [in] filename - The name of the new file
+ * [in] neededBlocks - The number of blocks (in sequence) to allocate
+ * [out] pTocIdx - The new file's position in the TOC
+ *
+ * Returns:
+ * FS_OK or one of the FS_ERR_* error codes
+ *
+ *****************************************************************************/
+static fresult qspifs_allocateFile(const char* filename, int neededBlocks, int* pTocIdx)
+{
+ int i, rc;
+
+ if (activeTOC == -1)
+ {
+ return FS_ERR_NOT_FORMATTED;
+ }
+
+ // Look at all blocks except for the reserved ones
+ for (i = 0; i < NUM_BLOCKS; i++)
+ {
+ //TODO: Improve search to use gaps to avoid having to move files
+ // that are written to
+ if (!USED_TOC_ENTRY(TOC[i]) && !TOC_IS_RESERVED(TOC[i]))
+ {
+ int j;
+ for (j = 1; j < neededBlocks; j++)
+ {
+ if (USED_TOC_ENTRY(TOC[i+j]) || TOC_IS_RESERVED(TOC[i+j]))
+ {
+ // not enough free blocks in sequence, skip past these
+ // tested entries and continue searching
+ i += j;
+ break;
+ }
+ }
+
+ if (j == neededBlocks)
+ {
+ const char* pSrc = filename;
+ if (IS_ADDR_IN_SPIFI(filename))
+ {
+ // The SPIFI ROM driver cannot write data from SPIFI into
+ // SPIFI (i.e. cannot read and write at the same time).
+ // The workaround is to copy the source data into a buffer
+ // in local memory and use that as source for the write
+ // instead.
+ memcpy(addr_conflict_buff, filename, strlen(filename)+1);
+ pSrc = addr_conflict_buff;
+ }
+
+ // Erase the new file's first block and store the filename at the
+ // start of it
+ opers.length = strlen(pSrc)+1;
+ opers.scratch = NULL;
+ opers.protect = 0;
+ opers.options = S_VERIFY_PROG | S_FORCE_ERASE;// S_CALLER_ERASE;
+ opers.dest = (char *)(i*ERASE_SIZE);
+ rc = spifi->spifi_program(&obj, (char*)pSrc, &opers);
+ if (rc) {
+ return qspifs_translateSpifiError(rc);
+ }
+
+ TOC[i] &= ~(TOC_VALID_MASK | TOC_USED_MASK | TOC_FILE_MASK | TOC_FSIZE_MASK);
+ TOC[i] |= HEADER_LEN;
+
+ *pTocIdx = i;
+ return FS_OK;
+ }
+ }
+ }
+ return FS_ERR_DISK_FULL;
+}
+
+/******************************************************************************
+ *
+ * Description:
+ * Deletes the specified file by marking all its blocks as unused in
+ * the TOC.
+ *
+ * Note: The deleted blocks are not erased here - that is done when they
+ * are allocated the next time.
+ *
+ * Params:
+ * [in] fh - The file handle with information about what to delete
+ *
+ * Returns:
+ * None
+ *
+ *****************************************************************************/
+static void qspifs_deleteFile(fileHandle_t* fh)
+{
+ int i;
+
+ for (i = fh->lastBlock; i >= fh->tocIdx; i--)
+ {
+ TOC[i] = ~TOC_VALID_MASK;
+ }
+}
+
+/******************************************************************************
+ *
+ * Description:
+ * Ensures that the specified file can grow to the wanted size.
+ * If the file size will increase enough to need one or more new blocks
+ * and there isn't enough space then an attempt is made to move the
+ * current file to a large enough space somewhere else.
+ *
+ * If there are more free block(s) at the end of the file then it is not
+ * moved and instead those blocks are marked as used.
+ *
+ * Note: The filename will not be tested for uniqueness.
+ * Note: The value of pTocIdx will only be valid if FS_OK is returned.
+ *
+ * Params:
+ * [in/out] fh - The current file handle, might be updated after a move
+ * [in] size - The wanted new size
+ *
+ * Returns:
+ * FS_OK or one of the FS_ERR_* error codes
+ *
+ *****************************************************************************/
+static fresult qspifs_allocateSpace(fileHandle_t* fh, uint32_t size)
+{
+ uint16_t oldNumBlocks = (fh->size + HEADER_LEN) / ERASE_SIZE;
+ uint16_t newNumBlocks = (fh->size + HEADER_LEN + size) / ERASE_SIZE;
+ uint16_t numNeeded = newNumBlocks - oldNumBlocks;
+ fresult res = FS_OK;
+
+ if (numNeeded > 0)
+ {
+ uint16_t i;
+ for (i = 0; i < numNeeded; i++)
+ {
+ if (USED_TOC_ENTRY(TOC[fh->tocIdx + oldNumBlocks + 1 + i]) ||
+ TOC_IS_RESERVED(TOC[fh->tocIdx + oldNumBlocks + 1 + i]))
+ {
+ fileHandle_t fhNew;
+
+ // have to move the chain
+ char* filename = (char*)(SPIFI_MEM_BASE + fh->tocIdx * ERASE_SIZE);
+ res = qspifs_allocateFile(filename, newNumBlocks, &(fhNew.tocIdx));
+ if (res == FS_OK)
+ {
+ // copy data
+ fhNew.lastBlock = fhNew.tocIdx;
+ fhNew.size = 0;
+ res = qspifs_write(&fhNew, (uint8_t*)(SPIFI_MEM_BASE + fh->tocIdx * ERASE_SIZE + HEADER_LEN), fh->size);
+ }
+ if (res == FS_OK)
+ {
+ // remove old entries
+ qspifs_deleteFile(fh);
+
+ // modify old handle to point to new information
+ fh->lastBlock = fhNew.lastBlock;
+ fh->size = fhNew.size;
+ fh->tocIdx = fhNew.tocIdx;
+ }
+ if (res != FS_OK)
+ {
+ // not possible to relocate the file => abort
+ return res;
+ }
+ break;
+ }
+ }
+
+ // have space that is unused, so mark as used
+ for (i = 0; i < numNeeded; i++)
+ {
+ int tocIdx = fh->tocIdx + oldNumBlocks + 1 + i;
+ TOC[tocIdx] &= ~TOC_USED_MASK;
+ qspifs_eraseBlock(tocIdx);
+ }
+ }
+
+ return res;
+}
+
+/******************************************************************************
+ *
+ * Description:
+ * Adds a file system to the QSPI flash. The entire flash will be erase
+ * except for the minReservedBytes first bytes. That reserved area (rounded
+ * up to the closest even multiple of the erase block size) can be used
+ * for anything and will never be touched by the file system. That area is
+ * typically used for executing programs from when the internal flash is
+ * full.
+ *
+ * The file system will have a table of content (TOC) placed at the start
+ * of the last erase block on the flash.
+ *
+ * Params:
+ * [in] minReservedBytes - The number of bytes to ignore at the start of
+ * the flash.
+ *
+ * Returns:
+ * FS_OK on success or one of the FS_ERR_* on failure
+ *
+ *****************************************************************************/
+static fresult qspifs_format(unsigned int minReservedBytes)
+{
+ int i, rc;
+ int numReserved = 0;
+
+ if (minReservedBytes > 0) {
+ numReserved = (minReservedBytes + ERASE_SIZE - 1) / ERASE_SIZE;
+ if (numReserved >= (NUM_BLOCKS - 2)) {
+ // Too many of the erase blocks are reserved - not even room for one file
+ return FS_ERR_INVALID_PARAM;
+ }
+ }
+
+#if 0 // works but is really slow
+ // Erase all non-reserved blocks
+ for (i = numReserved; i < NUM_BLOCKS; i++) {
+ opers.dest = (char *) (i * ERASE_SIZE);
+ opers.length = ERASE_SIZE;
+ opers.scratch = NULL;
+ opers.protect = 0;
+ opers.options = S_NO_VERIFY;
+ rc = spifi->spifi_erase(&obj, &opers);
+ if (rc) {
+ return qspifs_translateSpifiError(rc);
+ }
+ }
+#else
+ // Erase all non-reserved blocks
+ opers.dest = (char *) (numReserved * ERASE_SIZE);
+ opers.length = MEM_SIZE - (numReserved * ERASE_SIZE);
+ opers.scratch = NULL;
+ opers.protect = 0;
+ opers.options = S_NO_VERIFY;
+ rc = spifi->spifi_erase(&obj, &opers);
+ if (rc) {
+ return qspifs_translateSpifiError(rc);
+ }
+#endif
+
+ // Create the TOC, mark requested blocks as reserved and mark the TOC's
+ // block(s) as reserved as well.
+ for (i = 0; i < numReserved; i++) {
+ TOC[i] = ~(TOC_VALID_MASK | TOC_RESERVED_MASK);
+ }
+ for (; i < (NUM_BLOCKS - NUM_TOC_BLOCKS); i++) {
+ TOC[i] = ~TOC_VALID_MASK;
+ }
+ for (; i < NUM_BLOCKS; i++) {
+ TOC[i] = ~(TOC_VALID_MASK | TOC_RESERVED_MASK);
+ }
+
+ // Save the TOC in the last block
+ activeTOC = 0;
+ fresult res = qspifs_saveTOC();
+ if (res != FS_OK) {
+ activeTOC = -1;
+ return res;
+ }
+// opers.dest = (char *) TOC_BLOCK_ADDR;
+// opers.length = TOC_SIZE;
+// opers.scratch = NULL;
+// opers.protect = 0;
+// opers.options = S_VERIFY_PROG | S_CALLER_ERASE;
+// rc = spifi->spifi_program(&obj, (char*) TOC, &opers);
+// if (rc) {
+// return qspifs_translateSpifiError(rc);
+// }
+
+ // Read back TOC to be sure it worked
+ return qspifs_readTOC();
+}
+
+/******************************************************************************
+ *
+ * Description:
+ * Deletes all files on the file system. This is a "quick format" that
+ * leaves all blocks untouched and only modifies the TOC. Any reserved
+ * blocks are kept reserved.
+ *
+ * The purpose of this function is to make it easy to clear the file system
+ * without going through a time consuming complete erase every time.
+ *
+ * Params:
+ * None
+ *
+ * Returns:
+ * FS_OK on success or one of the FS_ERR_* on failure
+ *
+ *****************************************************************************/
+// static fresult qspifs_deleteAllFiles(void)
+// {
+// for (int i = 0; i < NUM_BLOCKS; i++)
+// {
+// if (!TOC_IS_RESERVED(TOC[i])) {
+// TOC[i] = ~TOC_VALID_MASK;
+// }
+// }
+//
+// return qspifs_saveTOC();
+// }
+
+/******************************************************************************
+ *
+ * Description:
+ * Appends the data to the end of the file.
+ *
+ * Params:
+ * [in] fh - The handle to the file as returned from fs_open_append()
+ * [in] pData - The data to save
+ * [in] size - Number of bytes to save
+ *
+ * Returns:
+ * FS_OK on success or one of the FS_ERR_* on failure
+ *
+ *****************************************************************************/
+static fresult qspifs_write(fileHandle_t* fh, const uint8_t * const pData, uint32_t size)
+{
+ uint32_t left = size;
+ const uint8_t* pSrc = pData;
+ int rc, i;
+ fresult res;
+ int failed_attempts = 0;
+
+ do {
+ res = qspifs_allocateSpace(fh, size);
+ if (res != FS_OK) {
+ break;
+ }
+
+ opers.dest = (char *) (SPIFI_MEM_BASE + fh->tocIdx * ERASE_SIZE
+ + HEADER_LEN + fh->size);
+ opers.scratch = NULL;
+ opers.protect = 0;
+ opers.options = S_VERIFY_PROG; // | S_FORCE_ERASE;
+
+ while ((res == FS_OK) && (left > 0)) {
+ if (left >= PROG_SIZE) {
+ opers.length = PROG_SIZE;
+ } else {
+ opers.length = left;
+ }
+ if (IS_ADDR_IN_SPIFI(pData)) {
+ memcpy(addr_conflict_buff, pSrc, opers.length);
+ rc = spifi->spifi_program(&obj, addr_conflict_buff, &opers);
+ } else {
+ rc = spifi->spifi_program(&obj, (char*) pSrc, &opers);
+ }
+ res = qspifs_translateSpifiError(rc);
+ if ((res == FS_ERR_SPIFI_VERIFICATION)
+ && (++failed_attempts <= NUM_VERIFICATION_ATTEMPTS)) {
+ // The verification process failed.
+ // In all the observed occasions re-running the exact same
+ // spifi_program command again yielded a 0 as a return value
+ // the second time.
+ // The quick'N'dirty fix is to re-run that program instruction
+ // NUM_VERIFICATION_ATTEMPTS more time(s) when this happens.
+ res = FS_OK;
+ continue;
+ }
+ if (res != FS_OK) {
+ // Got an error but cannot exit this function here as parts of the data
+ // (previous loops?) may have been written so the TOC must be updated.
+ break;
+ }
+ pSrc += opers.length;
+ opers.dest += opers.length;
+ left -= opers.length;
+ failed_attempts = 0;
+ }
+
+ // update file information
+ fh->size = fh->size + size - left;
+ fh->lastBlock = fh->tocIdx + ((fh->size + HEADER_LEN)/ ERASE_SIZE);
+ left = fh->size + HEADER_LEN;
+ for (i = 0; i <= (fh->lastBlock - fh->tocIdx); i++) {
+ TOC[fh->tocIdx + i] &= ~TOC_FSIZE_MASK;
+ TOC[fh->tocIdx + i] |= FS_MIN(ERASE_SIZE, left);
+ left -= FILESIZE(TOC[fh->tocIdx + i]);
+ }
+
+ if (res == FS_OK) {
+ res = qspifs_saveTOC();
+ } else {
+ // Want to save the TOC but not overwrite the previous error with
+ // a possibly successful TOC saving thus making it seem like there
+ // was no error
+ qspifs_saveTOC();
+ }
+ } while (0);
+
+ return res;
+}
+
+/******************************************************************************
+ *
+ * Description:
+ * Tests if str starts with prefix. A prefix of NULL or an empty string
+ * results in a positive result regardless of the content of str.
+ *
+ * Params:
+ * [in] prefix - The prefix to look for
+ * [in] str - The string to search for prefix
+ *
+ * Returns:
+ * True if the specified string starts with prefix
+ *
+ *****************************************************************************/
+static bool qspifs_startsWith(const char* prefix, const char* str)
+{
+ const char* pA = prefix;
+ const char* pB = str;
+
+ if (pA == NULL)
+ {
+ return true;
+ }
+ for (; *pA != '\0'; pA++, pB++)
+ {
+ if (*pB != *pA)
+ {
+ return false;
+ }
+ }
+
+ return true;
+}
+
+/******************************************************************************
+ * Class Declarations
+ *****************************************************************************/
+
+class QSPIFileHandle : public FileHandle {
+
+public:
+ QSPIFileHandle(fileHandle_t* handle, int flags);
+
+ virtual int close();
+
+ virtual ssize_t write(const void *buffer, size_t length);
+
+ virtual ssize_t read(void *buffer, size_t length);
+
+ virtual int isatty();
+
+ virtual off_t lseek(off_t position, int whence);
+
+ virtual int fsync();
+
+ virtual off_t flen();
+
+protected:
+
+ fileHandle_t fh;
+ bool allowReading;
+ bool allowWriting;
+ uint32_t pos;
+};
+
+class QSPIDirHandle : public DirHandle {
+
+public:
+ static QSPIDirHandle* openDir(const char* dirname);
+
+ virtual ~QSPIDirHandle();
+
+ virtual int closedir();
+ virtual struct dirent *readdir();
+ virtual void rewinddir();
+
+private:
+ QSPIDirHandle(const char* dirname);
+
+ int findFileWithPrefix(const char* prefix, int startTOCIdx, int maxTOCIdx) const;
+
+protected:
+
+ char* dirname;
+ int nextTocIdx;
+
+ bool isRoot;
+
+ struct dirent cur_entry;
+};
+
+/******************************************************************************
+ * Class Implementations
+ *****************************************************************************/
+
+QSPIFileHandle::QSPIFileHandle(fileHandle_t* handle, int flags)
+{
+ fh = *handle;
+ int accmode = (flags & O_ACCMODE);
+ allowReading = (accmode == O_RDONLY) || (accmode == O_RDWR);
+ allowWriting = (accmode == O_WRONLY) || (accmode == O_RDWR) || (flags & O_APPEND);
+ pos = 0;
+}
+
+int QSPIFileHandle::close()
+{
+ delete this;
+ return 0;
+}
+
+ssize_t QSPIFileHandle::write(const void *buffer, size_t length)
+{
+ if (!allowWriting) {
+ return -1;
+ }
+ fresult res = qspifs_write(&fh, (const uint8_t*)buffer, length);
+ if (res == FS_OK) {
+ // A write is always 'append' in this file system so the file
+ // position is always end of file after a write
+ pos = fh.size;
+ return length;
+ }
+ return -1;
+}
+
+ssize_t QSPIFileHandle::read(void *buffer, size_t length)
+{
+ if (!allowReading) {
+ return -1;
+ }
+ if (pos >= fh.size) {
+ return 0;
+ }
+ uint32_t len = FS_MIN(length, fh.size - pos);
+ const char* pData = (const char*)(SPIFI_MEM_BASE + fh.tocIdx*ERASE_SIZE + HEADER_LEN + pos);
+ memcpy(buffer, pData, len);
+ pos += len;
+ return len;
+}
+
+int QSPIFileHandle::isatty()
+{
+ return 0;
+}
+
+off_t QSPIFileHandle::lseek(off_t position, int whence)
+{
+ switch (whence) {
+ case SEEK_SET:
+ pos = position;
+ break;
+
+ case SEEK_CUR:
+ pos += position;
+ break;
+
+ case SEEK_END:
+ pos = fh.size + position;
+ break;
+
+ default:
+ return -1;
+ }
+ return pos;
+}
+
+int QSPIFileHandle::fsync()
+{
+ return 0; // always synced
+}
+
+off_t QSPIFileHandle::flen()
+{
+ return fh.size;
+}
+
+QSPIDirHandle::QSPIDirHandle(const char* dirname) {
+ size_t len = strlen(dirname);
+ this->dirname = (char*)malloc(len + 2); // null termination and possible ending '/'
+ if (this->dirname != NULL) {
+ if (len == 0 || ((len == 1) && (dirname[0] == '/'))) {
+ isRoot = true;
+ this->dirname[0] = '\0';
+ } else {
+ isRoot = false;
+ memcpy(this->dirname, dirname, len+1);
+ if (dirname[len - 1] != '/') {
+ this->dirname[len] = '/';
+ this->dirname[len+1] = '\0';
+ }
+ }
+ cur_entry.d_name[HEADER_FNAME_STRLEN] = '\0';
+ rewinddir();
+ }
+}
+
+QSPIDirHandle::~QSPIDirHandle()
+{
+ if (dirname != NULL) {
+ delete dirname;
+ dirname = NULL;
+ }
+}
+
+QSPIDirHandle* QSPIDirHandle::openDir(const char* dirname)
+{
+ QSPIDirHandle* d = new QSPIDirHandle(dirname);
+ if (d->dirname == NULL) {
+ // failed to allocate memory for the folder name
+ delete d;
+ d = NULL;
+ } else if (!d->isRoot) {
+ if (d->findFileWithPrefix(d->dirname, 0, NUM_BLOCKS) == NUM_BLOCKS) {
+ // There are no files in this directory, i.e. it does not exist
+ delete d;
+ d = NULL;
+ }
+ }
+ return d;
+}
+
+int QSPIDirHandle::closedir() {
+ delete this;
+ return 0;
+}
+
+int QSPIDirHandle::findFileWithPrefix(const char* prefix, int startTOCIdx, int maxTOCIdx) const
+{
+ for (int i = startTOCIdx; i < maxTOCIdx; i++) {
+ if (TOC_IS_FILE(TOC[i])) {
+ const char* filename = (const char*) (SPIFI_MEM_BASE + i * ERASE_SIZE);
+ if (qspifs_startsWith(prefix, filename)) {
+ return i;
+ }
+ }
+ }
+ return NUM_BLOCKS; // no match
+}
+
+
+struct dirent *QSPIDirHandle::readdir() {
+ if (nextTocIdx < NUM_BLOCKS) {
+ for (int i = nextTocIdx; i < NUM_BLOCKS; i++) {
+ int possible = findFileWithPrefix(dirname, i, NUM_BLOCKS);
+ if (possible < NUM_BLOCKS) {
+ const char* fullfilename = (const char*) (SPIFI_MEM_BASE + possible * ERASE_SIZE);
+ const char* filename = fullfilename + strlen(dirname);
+
+ if (strchr(filename, '/') == NULL) {
+ // file is not in any sub folder so it is truly in the wanted dir
+ nextTocIdx = possible + 1;
+ strcpy(cur_entry.d_name, filename);
+ return &cur_entry;
+ }
+
+ // this is a file in a subfolder and should not be reported,
+ // but the folder name itself should
+ strcpy(cur_entry.d_name, fullfilename);
+ char* pSlash = strchr(cur_entry.d_name + strlen(dirname), '/');
+ pSlash++;
+ *pSlash = '\0';
+
+ // now that cur_entry.d_name contains the folder's complete
+ // path with a trailing '/', see if it has occurred earlier
+ int older = findFileWithPrefix(cur_entry.d_name, 0, i);
+ if (older < possible) {
+ // already reported, move past this entry
+ i = possible;
+ } else {
+ // found a new subfolder
+ nextTocIdx = possible + 1;
+ strcpy(cur_entry.d_name, filename);
+ char* pSlash = strchr(cur_entry.d_name, '/');
+// pSlash++; //with ++ the returned dir name is "mydir/" without ++ "mydir" is returned
+ *pSlash = '\0';
+ return &cur_entry;
+ }
+ }
+ }
+ }
+ return NULL;
+}
+
+void QSPIDirHandle::rewinddir() {
+ nextTocIdx = 0;
+}
+
+
+QSPIFileSystem::QSPIFileSystem(const char* name) :
+ FileSystemLike(name) {
+
+ // Turn on SPIFI block as it is disabled on reset
+ LPC_SC->PCONP |= 0x00010000;
+
+ // pinsel for SPIFI
+ LPC_IOCON->P2_7 &= ~0x07;
+ LPC_IOCON->P2_7 |= 0x05; /* SPIFI_CSN @ P2.7 */
+ LPC_IOCON->P0_22 &= ~0x07;
+ LPC_IOCON->P0_22 |= 0x05; /* SPIFI_CLK @ P0.22 */
+ LPC_IOCON->P0_15 &= ~0x07;
+ LPC_IOCON->P0_15 |= 0x5; /* SPIFI_IO2 @ P0.15 */
+ LPC_IOCON->P0_16 &= ~0x07;
+ LPC_IOCON->P0_16 |= 0x5; /* SPIFI_IO3 @ P0.16 */
+ LPC_IOCON->P0_17 &= ~0x07;
+ LPC_IOCON->P0_17 |= 0x5; /* SPIFI_IO1 @ P0.17 */
+ LPC_IOCON->P0_18 &= ~0x07;
+ LPC_IOCON->P0_18 |= 0x5; /* SPIFI_IO0 @ P0.18 */
+
+ activeTOC = -1;
+ spifi = NULL;
+}
+
+// All modes are supported but:
+//
+// 1) All writes are treated as appends
+// 2) Truncation is only to size 0, i.e. effectively a delete
+// 3) File position operations work like this:
+// ReadOnly - dictates where to read from
+// WriteOnly - ignored, writes are always at the end
+// ReadWrite - dictates where to read from, writes ignore it but
+// sets the position to the end afterwards
+//
+FileHandle *QSPIFileSystem::open(const char *filename, int flags)
+{
+ fresult res = qspifs_init();
+// if (res == FS_OK) {
+// if ((flags & O_ACCMODE) == O_RDONLY) {
+// // ok
+// } else if (flags & O_APPEND) {
+// // ok
+// } else {
+// // not supported yet, this includes all combination of flags
+// // allowing writing at specific positions in the file. This file system
+// // only allows appending
+// res = FS_ERR_INVALID_PARAM;
+// }
+// }
+ if (res == FS_OK) {
+ if (strlen(filename) > HEADER_FNAME_STRLEN) {
+ // Filename is too long
+ res = FS_ERR_INVALID_PARAM;
+ }
+ }
+ if (res == FS_OK) {
+ // Handle truncation by silently deleting the file before
+ // attempting to open it
+ if (flags & O_TRUNC) {
+ remove(filename);
+ }
+ }
+ if (res == FS_OK) {
+ fileHandle_t fh = {0,0,0};
+ res = qspifs_findFile(filename, &fh);
+ if ((res == FS_ERR_NO_FILE) && (flags & O_CREAT)) {
+ res = qspifs_allocateFile(filename, 1, &fh.tocIdx);
+ }
+ if (res == FS_OK) {
+ res = qspifs_saveTOC();
+ }
+ if (res == FS_OK) {
+ return new QSPIFileHandle(&fh, flags);
+ }
+ }
+ debug_if(QSPI_DBG, "QSPIFS: Failed to open: %d\n", res);
+ return NULL;
+}
+
+int QSPIFileSystem::remove(const char *filename)
+{
+ fileHandle_t fh = {0,0,0};
+ fresult res = qspifs_init();
+ if (res == FS_OK) {
+ res = qspifs_findFile(filename, &fh);
+ }
+ if (res == FS_OK) {
+ qspifs_deleteFile(&fh);
+ res = qspifs_saveTOC();
+ }
+ else if (res == FS_ERR_NO_FILE) {
+ // file does not exist so treat it as a successful deletion
+ res = FS_OK;
+ }
+ if (res != FS_OK) {
+ debug_if(QSPI_DBG, "QSPIFS: Failed to delete %s: %d\n", filename, res);
+ return -1;
+ }
+ return 0;
+}
+
+int QSPIFileSystem::rename(const char *oldname, const char *newname)
+{
+ fileHandle_t fhOld = {0,0,0};
+ fileHandle_t fhNew = {0,0,0};
+
+ fresult res = qspifs_init();
+ if (res == FS_OK) {
+ res = qspifs_findFile(oldname, &fhOld);
+ }
+ if (res == FS_OK) {
+ // Make sure the destination file doesn't exist
+ res = qspifs_findFile(newname, &fhNew);
+ if (res == FS_OK) {
+ res = FS_ERR_FILE_EXIST;
+ } else if (res == FS_ERR_NO_FILE) {
+ res = FS_OK;
+ }
+ }
+ if (res == FS_OK) {
+ int numNeededBlocks = 1 + ((fhOld.size + HEADER_LEN) / ERASE_SIZE);
+ res = qspifs_allocateFile(newname, numNeededBlocks, &fhNew.tocIdx);
+ if (res == FS_OK) {
+ const uint8_t* pData = (const uint8_t*)(SPIFI_MEM_BASE + fhOld.tocIdx*ERASE_SIZE + HEADER_LEN);
+ res = qspifs_write(&fhNew, pData, fhOld.size);
+ if (res == FS_OK) {
+ qspifs_deleteFile(&fhOld);
+ } else {
+ qspifs_deleteFile(&fhNew);
+ }
+ }
+ qspifs_saveTOC();
+ }
+ if (res != FS_OK) {
+ debug_if(QSPI_DBG, "QSPIFS: Failed to rename '%s' to '%s': %d\n", oldname, newname, res);
+ return -1;
+ }
+ return 0;
+}
+
+DirHandle *QSPIFileSystem::opendir(const char *name)
+{
+ FileHandle* fh = open(name, O_RDONLY);
+ if (fh != NULL) {
+ // Attempting to open a file as a dir
+ delete fh;
+ return NULL;
+ }
+
+// printf("opendir: name '%s'\n", name);
+ if (strlen(name) <= HEADER_DNAME_MAXLEN) {
+ return QSPIDirHandle::openDir(name);
+ }
+ return NULL;
+}
+
+int QSPIFileSystem::mkdir(const char *name, mode_t mode)
+{
+ // Creating folders is always successful as there are no folders in this filesystem
+ return 0;
+}
+
+int QSPIFileSystem::format(unsigned int fsSizeInMB)
+{
+ fresult res = qspifs_init();
+ if (res == FS_OK || res == FS_ERR_NOT_FORMATTED) {
+ if (((fsSizeInMB<<20) > memInfo.memSize) || (fsSizeInMB < 1)) {
+ debug_if(QSPI_DBG, "QSPIFS: Failed to format to size %d MByte: error %d\n", fsSizeInMB, res);
+ return -1;
+ }
+ activeTOC = -1;
+ res = qspifs_format(memInfo.memSize - (fsSizeInMB<<20));
+ }
+
+ if (res != FS_OK) {
+ debug_if(QSPI_DBG, "QSPIFS: Failed to format: %d\n", res);
+ return -1;
+ }
+ return 0;
+}
+
+bool QSPIFileSystem::isformatted()
+{
+ fresult res = qspifs_init();
+ if (res == FS_OK) {
+ return true;
+ } else if (res == FS_ERR_NOT_FORMATTED) {
+ return false;
+ }
+ debug_if(QSPI_DBG, "QSPIFS: Failed to detect status: %d\n", res);
+ return false;
+}
+
+bool QSPIFileSystem::getMemoryBoundaries(uint32_t* pStartAddr, uint32_t* pEndAddr)
+{
+ if (isformatted())
+ {
+ *pEndAddr = 0x28000000 + memInfo.memSize;
+
+ // Look at all blocks except for the reserved ones
+ for (int i = 0; i < NUM_BLOCKS; i++)
+ {
+ if (!TOC_IS_RESERVED(TOC[i]))
+ {
+ // Found first non-reserved erase block, indicating the start of
+ // the file system.
+ *pStartAddr = SPIFI_MEM_BASE + i*ERASE_SIZE;
+ return true;
+ }
+ }
+
+ // The entire file system seems to be reserved which should never happen
+ // but just in case, report it as beeing 1MB in size.
+ *pStartAddr = *pEndAddr - 1024*1024;
+ return true;
+ }
+ return false;
+}
+
+
+
+