Hexiwear / Mbed OS Hexi_Click_Relay-v3_Example

Click Relay example for Hexiwear featuring Display, Touch buttons and Haptic feedback

Dependencies:   Hexi_KW40Z Hexi_OLED_SSD1351

Fork of Hexi_Click_Relay-v3_Example by Hexiwear

This project demonstrates the use of the Mikroelektronika Click Relay module with hexiwear featuring the OLED display, the Touch buttons and Haptic feedback

Plug Hexiwear into the Docking Station and the RELAY Click to the Click Socket 1
Connect the USB cable to your computer and to the micro-USB port of the Docking Station

Compile the project and copy the binary "Hexi_Click_Relay-v3_Example_HEXIWEAR.bin" in the DAP-LINK drive from your computer file explorer
Press the K64F-RESET button on the docking station to start the program on your board

The OLED screen will display two switch graphics with both relays in position OFF
Touch the left or right electrodes/buttons located below the screen to control the relay 1 or 2
Screen will update the graphics to reflect the status of the each relay either ON or OFF
Haptic motor will vibrate to acknowledge that a touch command has been received
RGB LED will briefly turn orange for Relay 1 and red for Relay 2 position change.

images.h

Committer:
GregC
Date:
2016-09-21
Revision:
1:420b0ad324f8
Parent:
0:ac93d26bbdb5

File content as of revision 1:420b0ad324f8:

 /*  Hexiwear NXP Bitmap Images
 *   This file contains the bitmaps for the full screen (96 by 96 pixels) NXP logo 
 *   and a smaller 96 by 32 pixels NXP logo.  
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *
 * Redistributions of source code must retain the above copyright notice, this list
 * of conditions and the following disclaimer.
 *
 * Redistributions in binary form must reproduce the above copyright notice, this
 * list of conditions and the following disclaimer in the documentation and/or
 * other materials provided with the distribution.
 *
 * Neither the name of NXP, nor the names of its
 * contributors may be used to endorse or promote products derived from this
 * software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * visit: http://www.mikroe.com and http://www.nxp.com
 *
 * get support at: http://www.mikroe.com/forum and https://community.nxp.com
 *
 * Project HEXIWEAR, 2015
 */
 

#include "stdint.h"

extern const uint8_t Relay_OFF[];
extern const uint8_t Button_OFF[];
extern const uint8_t Button_ON[];