Simple accelerometer and magnetometer program example for Hexiwear featuring UART

Dependencies:   FXOS8700

Fork of Hexi_Accelero_Magneto_Example by Hexiwear

This project demonstrates the use of the FXOS8700CQ combo Accelerometer and Magnetometer sensor embedded in hexiwear

Open a Hyperterminal tool on your computer and connect it to the "mbed Serial port (COMxx)" with Baud rate "9600bps"

Compile the project and copy the binary "Hexi_Accelero_Magneto_Example_HEXIWEAR.bin" in the DAP-LINK drive from your computer file explorer Press the K64F-RESET button on the docking station to start the program on your board

Message "Begin Data Acquisition from FXOS8700CQ sensor..." will appear in the Hyperterminal window
Then every 500ms the value of the Accelerometer and the Magnetometer for the Axis X, Y and Z plus their RMS value will be displayed in the Hyperterminal window and the LED will blink Green

Committer:
GregC
Date:
Mon Aug 15 23:31:10 2016 +0000
Revision:
3:9f60cb7455c4
Parent:
0:207337d58f96
Accelerometer and magnetometer program example for hexiwear

Who changed what in which revision?

UserRevisionLine numberNew contents of line
maclobdell 0:207337d58f96 1 .build
maclobdell 0:207337d58f96 2 .mbed
maclobdell 0:207337d58f96 3 projectfiles
maclobdell 0:207337d58f96 4 *.py*