Revision 21:ae0a4eedfc90, committed 2015-03-31

Comitter:

Geremia

Date:

Tue Mar 31 21:14:48 2015 +0000

Parent:

20:14daa48ffd4c

Child:

22:f9a37f22b9cb

Commit message:

Add BUS_8 and BUS_16 (slow as expected)

Changed in this revision

--- a/Display/LCD.cpp	Mon Mar 23 14:08:04 2015 +0000
+++ b/Display/LCD.cpp	Tue Mar 31 21:14:48 2015 +0000
@@ -41,6 +41,28 @@
   //  cls();
   //  locate(0,0);
 }
+LCD::LCD(proto_t displayproto, PinName* buspins, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const int lcdsize_x, const int lcdsize_y, const int ic_x_segs, const int ic_y_coms, const char *name)
+    : GraphicsDisplay(name), screensize_X(lcdsize_x), screensize_Y(lcdsize_y), _LCDPAGES(lcdsize_y>>3), _IC_X_SEGS(ic_x_segs), _IC_Y_COMS(ic_y_coms), _IC_PAGES(ic_y_coms>>3)
+{
+    if(displayproto==BUS_8)
+    {
+        PinName pins[16];
+        for(int i=0; i<16; i++) pins[i]=NC;
+        for(int i=0; i<8; i++) pins[i]=buspins[i];
+        proto = new BUS8(pins, CS, reset, DC, WR, RD);
+    }
+    useNOP=false;
+    buffer = (unsigned char*) malloc (screensize_X*_LCDPAGES);
+    buffer16 = (unsigned short*)buffer;
+    draw_mode = NORMAL;
+    set_orientation(1);
+    foreground(White);
+    background(Black);
+    set_auto_up(true);
+    tftID=0;
+  //  cls();
+  //  locate(0,0);
+}
 LCD::LCD(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const int lcdsize_x, const int lcdsize_y, const int ic_x_segs, const int ic_y_coms, const char *name)
     : GraphicsDisplay(name), screensize_X(lcdsize_x), screensize_Y(lcdsize_y), _LCDPAGES(lcdsize_y>>3), _IC_X_SEGS(ic_x_segs), _IC_Y_COMS(ic_y_coms), _IC_PAGES(ic_y_coms>>3)
 {

--- a/Display/LCD.h	Mon Mar 23 14:08:04 2015 +0000
+++ b/Display/LCD.h	Tue Mar 31 21:14:48 2015 +0000
@@ -4,6 +4,7 @@
 
 #include "GraphicsDisplay.h"
 #include "PAR8.h"
+#include "BUS8.h"
 #include "SPI8.h"
 #include "SPI16.h"
 #include "Protocols.h"
@@ -30,11 +31,16 @@
 
 public:         
           
-    /** Create a monochrome LCD Parallel interface
+    /** Create a monochrome LCD Parallel Port interface
     * @param name The name used by the parent class to access the interface
     */
     LCD(proto_t displayproto,PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const int lcdsize_x, const int lcdsize_y, const int ic_x_segs, const int ic_y_coms, const char* name);
     
+    /** Create a monochrome LCD Parallel Bus interface
+    * @param name The name used by the parent class to access the interface
+    */
+    LCD(proto_t displayproto,PinName* buspins, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const int lcdsize_x, const int lcdsize_y, const int ic_x_segs, const int ic_y_coms, const char* name);
+    
     /** Create a monochrome LCD SPI interface
     * @param name The name used by the parent class to access the interface
     */

--- a/Display/TFT.cpp	Mon Mar 23 14:08:04 2015 +0000
+++ b/Display/TFT.cpp	Tue Mar 31 21:14:48 2015 +0000
@@ -43,6 +43,36 @@
   //  cls();
   //  locate(0,0);
 }
+TFT::TFT(proto_t displayproto, PinName* buspins, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const int lcdsize_x, const int lcdsize_y, const char *name)
+    : GraphicsDisplay(name), screensize_X(lcdsize_x), screensize_Y(lcdsize_y)
+{
+    if(displayproto==BUS_8)
+    {
+        PinName pins[16];
+        for(int i=0; i<16; i++) pins[i]=NC;
+        for(int i=0; i<8; i++) pins[i]=buspins[i];
+        proto = new BUS8(pins, CS, reset, DC, WR, RD);
+    }
+    else if(displayproto==BUS_16)
+    {
+        proto = new BUS16(buspins, CS, reset, DC, WR, RD);
+    }
+    useNOP=false;
+    scrollbugfix=0;
+    mipistd=false;
+    set_orientation(0);
+    foreground(White);
+    background(Black);
+    set_auto_up(false); //we don't have framebuffer
+    topfixedareasize=0;
+    scrollareasize=0;
+    usefastwindow=false;
+    fastwindowready=false;
+    is18bit=false;
+    isBGR=false;
+  //  cls();
+  //  locate(0,0);
+}
 TFT::TFT(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const int lcdsize_x, const int lcdsize_y, const char *name)
     : GraphicsDisplay(name), screensize_X(lcdsize_x), screensize_Y(lcdsize_y)
 {

--- a/Display/TFT.h	Mon Mar 23 14:08:04 2015 +0000
+++ b/Display/TFT.h	Tue Mar 31 21:14:48 2015 +0000
@@ -4,6 +4,8 @@
 #include "GraphicsDisplay.h"
 #include "PAR8.h"
 #include "PAR16.h"
+#include "BUS8.h"
+#include "BUS16.h"
 #include "SPI8.h"
 #include "SPI16.h"
 #include "Protocols.h"
@@ -16,12 +18,17 @@
 
 public:         
           
-    /** Create a monochrome LCD Parallel interface
+    /** Create a TFT Parallel Port interface
     * @param name The name used by the parent class to access the interface
     */
     TFT(proto_t displayproto,PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const int lcdsize_x, const int lcdsize_y, const char* name);
     
-    /** Create a monochrome LCD SPI interface
+    /** Create a TFT Parallel Bus interface
+    * @param name The name used by the parent class to access the interface
+    */
+    TFT(proto_t displayproto,PinName* buspins, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const int lcdsize_x, const int lcdsize_y, const char* name);
+    
+    /** Create a TFT SPI interface
     * @param name The name used by the parent class to access the interface
     */
     TFT(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const int lcdsize_x, const int lcdsize_y, const char* name);

--- a/Display/TFT932x.cpp	Mon Mar 23 14:08:04 2015 +0000
+++ b/Display/TFT932x.cpp	Tue Mar 31 21:14:48 2015 +0000
@@ -33,6 +33,33 @@
   //  cls();
   //  locate(0,0);
 }
+TFT932x::TFT932x(proto_t displayproto, PinName* buspins, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const int lcdsize_x, const int lcdsize_y, const char *name)
+    : GraphicsDisplay(name), screensize_X(lcdsize_x), screensize_Y(lcdsize_y)
+{
+    if(displayproto==BUS_8)
+    {
+        PinName pins[16];
+        for(int i=0; i<16; i++) pins[i]=NC;
+        for(int i=0; i<8; i++) pins[i]=buspins[i];
+        proto = new BUS8(pins, CS, reset, DC, WR, RD);
+        dummycycles=1;
+    }
+    else if(displayproto==BUS_16)
+    {
+        proto = new BUS16(buspins, CS, reset, DC, WR, RD);
+        dummycycles=0;
+    }
+  //  set_orientation(0);
+    foreground(White);
+    background(Black);
+    set_auto_up(false); //we don't have framebuffer
+    usefastwindow=false;
+    fastwindowready=false;
+    is18bit=false;
+    isBGR=false;
+  //  cls();
+  //  locate(0,0);
+}
 TFT932x::TFT932x(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, const int lcdsize_x, const int lcdsize_y, const char *name)
     : GraphicsDisplay(name), screensize_X(lcdsize_x), screensize_Y(lcdsize_y)
 {

--- a/Display/TFT932x.h	Mon Mar 23 14:08:04 2015 +0000
+++ b/Display/TFT932x.h	Tue Mar 31 21:14:48 2015 +0000
@@ -4,6 +4,8 @@
 #include "GraphicsDisplay.h"
 #include "PAR8.h"
 #include "PAR16.h"
+#include "BUS8.h"
+#include "BUS16.h"
 #include "SPI8.h"
 #include "SPI16.h"
 #include "Protocols.h"
@@ -16,12 +18,17 @@
 
 public:         
           
-    /** Create a monochrome LCD Parallel interface
+    /** Create TFT Parallel Port interface
     * @param name The name used by the parent class to access the interface
     */
-    TFT932x(proto_t displayproto,PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const int lcdsize_x, const int lcdsize_y, const char* name);
+    TFT932x(proto_t displayproto, PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const int lcdsize_x, const int lcdsize_y, const char* name);
     
-    /** Create a monochrome LCD SPI interface
+    /** Create TFT Parallel Bus interface
+    * @param name The name used by the parent class to access the interface
+    */
+    TFT932x(proto_t displayproto, PinName* buspins, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const int lcdsize_x, const int lcdsize_y, const char* name);
+    
+    /** Create TFT SPI interface
     * @note ILI9325D has different SPI protocol, not supported here
     * @param name The name used by the parent class to access the interface
     */

--- a/Inits/ILI932x.cpp	Mon Mar 23 14:08:04 2015 +0000
+++ b/Inits/ILI932x.cpp	Tue Mar 31 21:14:48 2015 +0000
@@ -24,6 +24,19 @@
     cls();
     locate(0,0); 
 }
+ILI932x::ILI932x(proto_t displayproto, PinName* buspins, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char *name , unsigned int LCDSIZE_X, unsigned  int LCDSIZE_Y)
+    : TFT932x(displayproto, buspins, CS, reset, DC, WR, RD, LCDSIZE_X, LCDSIZE_Y, name)
+{
+    hw_reset();
+    BusEnable(true);  //set CS low, will stay low untill manually set high with BusEnable(false);
+    identify(); // will collect tftID
+    if(tftID==0x9325) init9325();
+    auto_gram_read_format();// try to get read gram pixel format, could be 16bit or 18bit, RGB or BGR. Will set flags accordingly
+    set_orientation(0);
+    FastWindow(true); // most but not all controllers support this, even if datasheet tells they should. 
+    cls();
+    locate(0,0); 
+}
 ILI932x::ILI932x(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, const char *name, unsigned int LCDSIZE_X, unsigned  int LCDSIZE_Y)
     : TFT932x(displayproto, Hz, mosi, miso, sclk, CS, reset, LCDSIZE_X, LCDSIZE_Y, name)
 {

--- a/Inits/ILI932x.h	Mon Mar 23 14:08:04 2015 +0000
+++ b/Inits/ILI932x.h	Tue Mar 31 21:14:48 2015 +0000
@@ -27,6 +27,21 @@
     * @param LCDSIZE_Y y size in pixel - optional
     */ 
     ILI932x(proto_t displayproto, PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name, unsigned int LCDSIZE_X = 240, unsigned  int LCDSIZE_Y = 320);
+    
+    /** Create a BUS display interface
+    * @param displayproto BUS_8 or BUS_16
+    * @param buspins array of PinName to group as Bus
+    * , i.e. PinName buspins[8]={PC_0,PC_1,PC_2,PC_3,D9,D8,D7,D6};
+    * @param CS pin connected to CS of display
+    * @param reset pin connected to RESET of display
+    * @param DC pin connected to data/command of display
+    * @param WR pin connected to SDI of display
+    * @param RD pin connected to RS of display
+    * @param name The name used by the parent class to access the interface
+    * @param LCDSIZE_X x size in pixel - optional
+    * @param LCDSIZE_Y y size in pixel - optional
+    */ 
+    ILI932x(proto_t displayproto, PinName* buspins, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name, unsigned int LCDSIZE_X = 240, unsigned  int LCDSIZE_Y = 320);
   
     /** Create an SPI display interface
     * @param displayproto SPI_8 or SPI_16

--- a/Inits/ILI9341.cpp	Mon Mar 23 14:08:04 2015 +0000
+++ b/Inits/ILI9341.cpp	Tue Mar 31 21:14:48 2015 +0000
@@ -29,6 +29,19 @@
     FastWindow(true); // most but not all controllers support this, even if datasheet tells they should. 
     locate(0,0); 
 }
+ILI9341::ILI9341(proto_t displayproto, PinName* buspins, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char *name, unsigned int LCDSIZE_X, unsigned  int LCDSIZE_Y)
+    : TFT(displayproto, buspins, CS, reset, DC, WR, RD, LCDSIZE_X, LCDSIZE_Y, name)
+{
+    hw_reset();
+    BusEnable(true);
+    identify(); // will collect tftID and set mipistd flag
+    init();
+    auto_gram_read_format();
+    set_orientation(0);
+    cls();
+    FastWindow(true); // most but not all controllers support this, even if datasheet tells they should. 
+    locate(0,0); 
+}
 ILI9341::ILI9341(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const char *name, unsigned int LCDSIZE_X , unsigned  int LCDSIZE_Y)
     : TFT(displayproto, Hz, mosi, miso, sclk, CS, reset, DC, LCDSIZE_X, LCDSIZE_Y, name)
 {

--- a/Inits/ILI9341.h	Mon Mar 23 14:08:04 2015 +0000
+++ b/Inits/ILI9341.h	Tue Mar 31 21:14:48 2015 +0000
@@ -26,8 +26,21 @@
     * @param LCDSIZE_X x size in pixel - optional
     * @param LCDSIZE_Y y size in pixel - optional
     */ 
-    //ILI9341(proto_t displayproto, PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name);
     ILI9341(proto_t displayproto, PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name ,const unsigned int LCDSIZE_X = 240, unsigned  int LCDSIZE_Y = 320);
+    
+    /** Create a BUS display interface
+    * @param displayproto BUS_8 or BUS_16
+    * @param buspins array of PinName to group as Bus
+    * @param CS pin connected to CS of display
+    * @param reset pin connected to RESET of display
+    * @param DC pin connected to data/command of display
+    * @param WR pin connected to SDI of display
+    * @param RD pin connected to RS of display
+    * @param name The name used by the parent class to access the interface
+    * @param LCDSIZE_X x size in pixel - optional
+    * @param LCDSIZE_Y y size in pixel - optional
+    */ 
+    ILI9341(proto_t displayproto, PinName* buspins, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name ,const unsigned int LCDSIZE_X = 240, unsigned  int LCDSIZE_Y = 320);
   
     /** Create an SPI display interface
     * @param displayproto SPI_8 or SPI_16
@@ -42,7 +55,6 @@
     * @param LCDSIZE_X x size in pixel - optional
     * @param LCDSIZE_Y y size in pixel - optional
     */ 
-    //ILI9341(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const char* name);
     ILI9341(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const char* name ,unsigned int LCDSIZE_X = 240, unsigned  int LCDSIZE_Y = 320);
   
 

--- a/Inits/ST7565.cpp	Mon Mar 23 14:08:04 2015 +0000
+++ b/Inits/ST7565.cpp	Tue Mar 31 21:14:48 2015 +0000
@@ -28,6 +28,16 @@
     set_orientation(1);
     locate(0,0);
 }
+ST7565::ST7565(proto_t displayproto, PinName* buspins, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char *name, unsigned int LCDSIZE_X, unsigned  int LCDSIZE_Y)
+    : LCD(displayproto, buspins, CS, reset, DC, WR, RD, LCDSIZE_X, LCDSIZE_Y, IC_X_SEGS, IC_Y_COMS, name)
+{
+    hw_reset();
+    BusEnable(true);
+    init();
+    cls();
+    set_orientation(1);
+    locate(0,0);
+}
 ST7565::ST7565(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const char *name, unsigned int LCDSIZE_X, unsigned  int LCDSIZE_Y)
     : LCD(displayproto, Hz, mosi, miso, sclk, CS, reset, DC, LCDSIZE_X, LCDSIZE_Y, IC_X_SEGS, IC_Y_COMS, name)
 {

--- a/Inits/ST7565.h	Mon Mar 23 14:08:04 2015 +0000
+++ b/Inits/ST7565.h	Tue Mar 31 21:14:48 2015 +0000
@@ -27,6 +27,20 @@
     * @param LCDSIZE_Y y size in pixel - optional
     */ 
     ST7565(proto_t displayproto, PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name, unsigned int LCDSIZE_X = 132, unsigned  int LCDSIZE_Y = 64);
+    
+    /** Create a BUS display interface
+    * @param displayproto only supports BUS_8
+    * @param buspins array of PinName to group as Bus
+    * @param CS pin connected to CS of display
+    * @param reset pin connected to RESET of display
+    * @param DC pin connected to data/command of display
+    * @param WR pin connected to SDI of display
+    * @param RD pin connected to RS of display
+    * @param name The name used by the parent class to access the interface
+    * @param LCDSIZE_X x size in pixel - optional
+    * @param LCDSIZE_Y y size in pixel - optional
+    */ 
+    ST7565(proto_t displayproto, PinName* buspins, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name, unsigned int LCDSIZE_X = 132, unsigned  int LCDSIZE_Y = 64);
   
     /** Create an SPI display interface
     * @param displayproto SPI_8 or SPI_16

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Protocols/BUS16.cpp	Tue Mar 31 21:14:48 2015 +0000
@@ -0,0 +1,227 @@
+ /* mbed UniGraphic library - BUS16 protocol class
+ * Copyright (c) 2015 Giuliano Dianda
+ * Released under the MIT License: http://mbed.org/license/mit
+ *
+ * Derived work of:
+ *
+ * mbed library for 240*320 pixel display TFT based on ILI9341 LCD Controller
+ * Copyright (c) 2013 Peter Drescher - DC2PD
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+#include "BUS16.h"
+
+BUS16::BUS16(PinName* buspins, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD)
+    : _bus(buspins), _CS(CS), _reset(reset), _DC(DC), _WR(WR), _RD(RD)
+{
+    _reset = 1;
+    _DC=1;
+    _WR=1;
+    _RD=1;
+    _CS=1;
+    _bus.mode(PullNone);
+    _bus.output(); // will re-enable our GPIO port
+    hw_reset();    
+}
+
+void BUS16::wr_cmd8(unsigned char cmd)
+{      
+    _DC = 0; // 0=cmd
+    _bus.write(cmd);      // write 8bit
+    _WR=0;
+    _WR=1;
+    _DC = 1; // 1=data next
+}
+void BUS16::wr_data8(unsigned char data)
+{
+    _bus.write(data);    // write 8bit
+    _WR=0;
+    _WR=1;
+}
+void BUS16::wr_cmd16(unsigned short cmd)
+{    
+    _DC = 0; // 0=cmd
+    _bus.write(cmd>>8);      // write 8bit
+    _WR=0;
+    _WR=1;
+    _bus.write(cmd&0xFF);      // write 8bit
+    _WR=0;
+    _WR=1;
+    _DC = 1; // 1=data next
+}
+void BUS16::wr_data16(unsigned short data)
+{
+    _bus.write(data>>8);    // write 8bit
+    _WR=0;
+    _WR=1;
+    _bus.write(data&0xFF);    // write 8bit
+    _WR=0;
+    _WR=1;
+}
+void BUS16::wr_gram(unsigned short data)
+{
+    _bus.write(data);    // write 16bit
+    _WR=0;
+    _WR=1;
+}
+void BUS16::wr_gram(unsigned short data, unsigned int count)
+{
+    while(count)
+    {
+        _bus.write(data);    // rewrite even if same data, otherwise too much fast
+        _WR=0;
+        _WR=1;
+        count--;
+    }
+}
+void BUS16::wr_grambuf(unsigned short* data, unsigned int lenght)
+{
+    while(lenght)
+    {
+        _bus.write(*data);    // write 16bit
+        _WR=0;
+        _WR=1;
+        data++;
+        lenght--;
+    }
+}
+unsigned short BUS16::rd_gram(bool convert)
+{
+    unsigned int r=0;
+   _bus.input();
+   
+    _RD = 0;
+    _bus.read(); //dummy read
+    _RD = 1;
+    
+    _RD = 0;
+  //  _RD = 0; // add wait
+    r |= _bus.read();
+    _RD = 1;
+    if(convert)
+    {
+        r <<= 8;
+        _RD = 0;
+  //      _RD = 0; // add wait
+        r |= _bus.read()>>8; //MSB of port read is blue, LSB is red of next pixel
+        _RD = 1;
+        // gram is 18bit/pixel, if you set 16bit/pixel (cmd 3A), during writing the 16bits are expanded to 18bit
+        // during reading, you read the raw 18bit gram
+        r = RGB24to16((r&0xFF0000)>>16, (r&0xFF00)>>8, r&0xFF);// 18bit pixel padded to 24bits, rrrrrr00_gggggg00_bbbbbb00, converted to 16bit
+    }
+    _bus.output();
+    return (unsigned short)r;
+}
+unsigned int BUS16::rd_reg_data32(unsigned char reg)
+{
+    wr_cmd8(reg);
+    unsigned int r=0;
+  //  _DC = 1; // 1=data
+   _bus.input();
+   
+    _RD = 0;
+    _bus.read(); //dummy read
+    _RD = 1;
+    
+    _RD = 0;
+//    _RD = 0; // add wait
+    r |= (_bus.read()&0xFF);
+    r <<= 8;
+    _RD = 1;
+    
+    _RD = 0;
+//    _RD = 0; // add wait
+    r |= (_bus.read()&0xFF);
+    r <<= 8;
+    _RD = 1;
+    
+    _RD = 0;
+//    _RD = 0; // add wait
+    r |= (_bus.read()&0xFF);
+    r <<= 8;
+    _RD = 1;
+    
+    _RD = 0;
+//    _RD = 0; // add wait
+    r |= (_bus.read()&0xFF);
+    _RD = 1;
+    
+    _CS = 1; // toggle CS to interupt the cmd in case was not supported
+    _CS = 0;
+
+    _bus.output();
+    return r;
+}
+// in Par mode EXTC regs (0xB0-0xFF) can be directly read
+unsigned int BUS16::rd_extcreg_data32(unsigned char reg, unsigned char SPIreadenablecmd)
+{
+    return rd_reg_data32(reg);
+}
+// ILI932x specific
+void BUS16::dummyread()
+{
+    _bus.input();
+    _RD = 0;
+    _bus.read();    // dummy read
+    _RD=1;
+ //   _bus.output();
+}
+// ILI932x specific
+void BUS16::reg_select(unsigned char reg, bool forread)
+{    
+    _DC = 0;
+    _bus.write(reg);    // write 16bit
+    _WR=0;
+    _WR=1;
+    _DC = 1; // 1=data next
+}
+// ILI932x specific
+void BUS16::reg_write(unsigned char reg, unsigned short data)
+{
+    _DC = 0;
+    _bus.write(reg);    // write 16bit
+    _WR=0;
+    _WR=1;
+    _DC = 1;
+    _bus.write(data);    // write 16bit
+    _WR=0;
+    _WR=1;
+}
+// ILI932x specific
+unsigned short BUS16::reg_read(unsigned char reg)
+{
+    unsigned short r=0;
+    _DC = 0;
+    _bus.write(reg);    // write 16bit
+    _WR=0;
+    _WR=1;
+    _DC = 1;
+    _bus.input();
+    _RD=0;
+    r |= _bus.read();    // read 16bit
+    _RD=1;
+    _bus.output();
+    return r;
+}
+void BUS16::hw_reset()
+{
+    wait_ms(15);
+    _DC = 1;
+    _CS = 1;
+    _WR = 1;
+    _RD = 1;
+    _reset = 0;                        // display reset
+    wait_ms(2);
+    _reset = 1;                       // end reset
+    wait_ms(100);
+}
+void BUS16::BusEnable(bool enable)
+{
+    _CS = enable ? 0:1;
+}
\ No newline at end of file

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Protocols/BUS16.h	Tue Mar 31 21:14:48 2015 +0000
@@ -0,0 +1,149 @@
+#ifndef BUS16_H
+#define BUS16_H
+
+#include "mbed.h"
+#include "Protocols.h"
+//#include "GraphicsDisplay.h"
+
+/** Parallel 16bit interface
+*/
+class BUS16 : public Protocols
+{
+ public:
+
+    /** Create a BUS16 display interface with scattered pins and 5 control pins
+    *
+    * @param buspins array of PinNames to group as Bus
+    * @param CS pin connected to CS of display
+    * @param reset pin connected to RESET of display
+    * @param DC pin connected to data/command of display
+    * @param WR pin connected to SDI of display
+    * @param RD pin connected to RS of display 
+    */ 
+    BUS16(PinName* buspins, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD);
+
+protected:
+  
+    /** Send 8bit command to display controller 
+    *
+    * @param cmd: byte to send  
+    *
+    */   
+    virtual void wr_cmd8(unsigned char cmd);
+    
+    /** Send 8bit data to display controller 
+    *
+    * @param data: byte to send   
+    *
+    */   
+    virtual void wr_data8(unsigned char data);
+    
+    /** Send 2x8bit command to display controller 
+    *
+    * @param cmd: halfword to send  
+    * @note 2cycles using pins[7:0]
+    */   
+    virtual void wr_cmd16(unsigned short cmd);
+    
+    /** Send 2x8bit data to display controller 
+    *
+    * @param data: halfword to send   
+    * @note 2cycles using pins[7:0], only gram write cmd uses pins[15:8]
+    */   
+    virtual void wr_data16(unsigned short data);
+    
+    /** Send 16bit pixeldata to display controller 
+    *
+    * @param data: halfword to send   
+    * @note here using all pins[15:0]
+    */   
+    virtual void wr_gram(unsigned short data);
+    
+    /** Send same 16bit pixeldata to display controller multiple times
+    *
+    * @param data: halfword to send
+    * @param count: how many
+    * @note here using all pins[15:0]
+    */   
+    virtual void wr_gram(unsigned short data, unsigned int count);
+    
+    /** Send array of pixeldata shorts to display controller
+    *
+    * @param data: unsigned short pixeldata array
+    * @param lenght: lenght (in shorts)
+    * @note here using all pins[15:0]
+    */   
+    virtual void wr_grambuf(unsigned short* data, unsigned int lenght);
+    
+    /** Read 16bit pixeldata from display controller (with dummy cycle)
+    *
+    * @param convert true/false. Convert 18bit to 16bit, some controllers returns 18bit
+    * @returns 16bit color
+    */ 
+    virtual unsigned short rd_gram(bool convert);
+    
+    /** Read 4x8bit register data (with dummy cycle)
+    * @param reg the register to read
+    * @returns data as uint
+    * 
+    */ 
+    virtual unsigned int rd_reg_data32(unsigned char reg);
+    
+    /** Read 3x8bit ExtendedCommands register data
+    * @param reg the register to read
+    * @returns data as uint
+    * @note EXTC regs (0xB0 to 0xFF) are read/write registers, for Parallel mode directly accessible in both directions
+    */ 
+    virtual unsigned int rd_extcreg_data32(unsigned char reg, unsigned char SPIreadenablecmd);
+    
+    /** ILI932x specific, does a dummy read cycle, number of bits is protocol dependent
+    * for PAR protocols: a signle RD bit toggle
+    * for SPI8: 8clocks
+    * for SPI16: 16 clocks
+    */   
+    virtual void dummyread ();
+    
+    /** ILI932x specific, select register for a successive write or read
+    *
+    * @param reg register to be selected
+    * @param forread false = a write next (default), true = a read next
+    * @note forread only used by SPI protocols
+    */   
+    virtual void reg_select(unsigned char reg, bool forread =false);
+    
+    /** ILI932x specific, write register with data
+    *
+    * @param reg register to write
+    * @param data 16bit data
+    */   
+    virtual void reg_write(unsigned char reg, unsigned short data);
+    
+    /** ILI932x specific, read register
+    *
+    * @param reg register to be read
+    * @returns 16bit register value
+    */ 
+    virtual unsigned short reg_read(unsigned char reg);
+    
+    /** HW reset sequence (without display init commands)   
+    */
+    virtual void hw_reset();
+    
+    /** Set ChipSelect high or low
+    * @param enable 0/1   
+    */
+    virtual void BusEnable(bool enable);
+  
+   
+
+private:
+
+    BusInOut _bus;
+    DigitalOut _CS; 
+    DigitalOut _reset;
+    DigitalOut _DC;
+    DigitalOut _WR;
+    DigitalOut _RD;
+  
+};
+#endif
\ No newline at end of file

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Protocols/BUS8.cpp	Tue Mar 31 21:14:48 2015 +0000
@@ -0,0 +1,275 @@
+ /* mbed UniGraphic library - BUS8 protocol class
+ * Copyright (c) 2015 Giuliano Dianda
+ * Released under the MIT License: http://mbed.org/license/mit
+ *
+ * Derived work of:
+ *
+ * mbed library for 240*320 pixel display TFT based on ILI9341 LCD Controller
+ * Copyright (c) 2013 Peter Drescher - DC2PD
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+ 
+#include "BUS8.h"
+
+BUS8::BUS8(PinName* buspins, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD)
+    : _bus(buspins), _CS(CS), _reset(reset), _DC(DC), _WR(WR), _RD(RD)
+{
+    _reset = 1;
+    _DC=1;
+    _WR=1;
+    _RD=1;
+    _CS=1;
+    _bus.mode(PullNone);
+    _bus.output(); // will re-enable our GPIO port
+    hw_reset();    
+}
+
+void BUS8::wr_cmd8(unsigned char cmd)
+{      
+    _DC = 0; // 0=cmd
+    _bus.write(cmd);      // write 8bit
+    _WR=0;
+    _WR=1;
+    _DC = 1; // 1=data next
+}
+void BUS8::wr_data8(unsigned char data)
+{
+    _bus.write(data);    // write 8bit
+    _WR=0;
+    _WR=1;
+}
+void BUS8::wr_cmd16(unsigned short cmd)
+{      
+    _DC = 0; // 0=cmd
+    _bus.write(cmd>>8);      // write 8bit
+    _WR=0;
+    _WR=1;
+    _bus.write(cmd&0xFF);      // write 8bit
+    _WR=0;
+    _WR=1;
+    _DC = 1; // 1=data next
+}
+void BUS8::wr_data16(unsigned short data)
+{
+    _bus.write(data>>8);    // write 8bit
+    _WR=0;
+    _WR=1;
+    _bus.write(data&0xFF);    // write 8bit
+    _WR=0;
+    _WR=1;
+}
+void BUS8::wr_gram(unsigned short data)
+{
+    _bus.write(data>>8);    // write 8bit
+    _WR=0;
+    _WR=1;
+    _bus.write(data&0xFF);    // write 8bit
+    _WR=0;
+    _WR=1;
+}
+void BUS8::wr_gram(unsigned short data, unsigned int count)
+{
+    if((data>>8)==(data&0xFF))
+    {
+        count<<=1;
+      //  _bus.write(data);    // write 8bit
+        while(count)
+        {
+            _bus.write(data);    // rewrite even if same data, otherwise too much fast
+            _WR=0;
+            _WR=1;
+            count--;
+        }
+    }
+    else
+    {
+        while(count)
+        {
+            _bus.write(data>>8);    // write 8bit
+            _WR=0;
+            _WR=1;
+            _bus.write(data&0xFF);    // write 8bit
+            _WR=0;
+            _WR=1;
+            count--;
+        }
+    }
+}
+void BUS8::wr_grambuf(unsigned short* data, unsigned int lenght)
+{
+    while(lenght)
+    {
+        _bus.write((*data)>>8);    // write 8bit
+        _WR=0;
+        _WR=1;
+        _bus.write((*data)&0xFF);    // write 8bit
+        _WR=0;
+        _WR=1;
+        data++;
+        lenght--;
+    }
+}
+unsigned short BUS8::rd_gram(bool convert)
+{
+    unsigned int r=0;
+   _bus.input();
+   
+    _RD = 0;
+    _RD = 0; // add wait
+    _bus.read(); //dummy read
+    _RD = 1;
+    
+    _RD = 0;
+    _RD = 0; // add wait
+    r |= _bus.read();
+    _RD = 1;
+    r <<= 8;
+    
+    _RD = 0;
+    _RD = 0; // add wait
+    r |= _bus.read();
+    _RD = 1;
+    if(convert)
+    {
+        r <<= 8;
+        _RD = 0;
+  //      _RD = 0; // add wait
+        r |= _bus.read();
+        _RD = 1;
+        // gram is 18bit/pixel, if you set 16bit/pixel (cmd 3A), during writing the 16bits are expanded to 18bit
+        // during reading, you read the raw 18bit gram
+        r = RGB24to16((r&0xFF0000)>>16, (r&0xFF00)>>8, r&0xFF);// 18bit pixel padded to 24bits, rrrrrr00_gggggg00_bbbbbb00, converted to 16bit
+    }
+    _bus.output();
+    return (unsigned short)r;
+}
+unsigned int BUS8::rd_reg_data32(unsigned char reg)
+{
+    wr_cmd8(reg);
+    unsigned int r=0;
+   _bus.input();
+   
+    _RD = 0;
+    _bus.read(); //dummy read
+    _RD = 1;
+    
+    _RD = 0;
+ //   _RD = 0; // add wait
+    r |= (_bus.read()&0xFF);
+    r <<= 8;
+    _RD = 1;
+    
+    _RD = 0;
+ //   _RD = 0; // add wait
+    r |= (_bus.read()&0xFF);
+    r <<= 8;
+    _RD = 1;
+    
+    _RD = 0;
+//    _RD = 0; // add wait
+    r |= (_bus.read()&0xFF);
+    r <<= 8;
+    _RD = 1;
+    
+    _RD = 0;
+ //   _RD = 0; // add wait
+    r |= (_bus.read()&0xFF);
+    _RD = 1;
+    
+    _CS = 1; // force CS HIG to interupt the cmd in case was not supported
+    _CS = 0;
+    _bus.output();
+    return r;
+}
+// in Par mode EXTC regs (0xB0-0xFF) can be directly read
+unsigned int BUS8::rd_extcreg_data32(unsigned char reg, unsigned char SPIreadenablecmd)
+{
+    return rd_reg_data32(reg);
+}
+// ILI932x specific
+void BUS8::dummyread()
+{
+    _bus.input();
+    _RD=0;
+    _RD=0; // add wait
+    _bus.read();    // dummy read
+    _RD=1;
+ //   _bus.output();
+}
+// ILI932x specific
+void BUS8::reg_select(unsigned char reg, bool forread)
+{
+    _DC = 0;
+    _bus.write(0);    // write MSB
+    _WR=0;
+    _WR=1;
+    _bus.write(reg);    // write LSB
+    _WR=0;
+    _WR=1;
+    _DC = 1; // 1=data next
+}
+// ILI932x specific
+void BUS8::reg_write(unsigned char reg, unsigned short data)
+{
+    _DC = 0;
+    _bus.write(0);    // write MSB
+    _WR=0;
+    _WR=1;
+    _bus.write(reg);    // write MSB
+    _WR=0;
+    _WR=1;
+    _DC = 1;
+    _bus.write(data>>8);
+    _WR=0;
+    _WR=1;
+    _bus.write(data&0xFF);
+    _WR=0;
+    _WR=1;
+}
+// ILI932x specific
+unsigned short BUS8::reg_read(unsigned char reg)
+{
+    unsigned short r=0;
+    _DC = 0;
+    _bus.write(0);
+    _WR=0;
+    _WR=1;
+    _bus.write(reg);
+    _WR=0;
+    _WR=1;
+    _DC = 1;
+    _bus.input();
+    _RD=0;
+    r |= _bus.read();    // read 8bit
+    _RD=1;
+    r <<= 8;
+    _RD=0;
+    r |= _bus.read();    // read 8bit
+    _RD=1;
+    _bus.output();
+    
+    return r;
+}
+void BUS8::hw_reset()
+{
+    wait_ms(15);
+    _DC = 1;
+    _CS = 1;
+    _WR = 1;
+    _RD = 1;
+    _reset = 0;                        // display reset
+    wait_ms(2);
+    _reset = 1;                       // end reset
+    wait_ms(100);
+}
+void BUS8::BusEnable(bool enable)
+{
+    _CS = enable ? 0:1;
+}
\ No newline at end of file

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Protocols/BUS8.h	Tue Mar 31 21:14:48 2015 +0000
@@ -0,0 +1,150 @@
+#ifndef BUS8_H
+#define BUS8_H
+
+#include "mbed.h"
+#include "Protocols.h"
+//#include "GraphicsDisplay.h"
+
+/** Parallel 8bit interface
+*/
+class BUS8 : public Protocols
+{
+ public:
+
+    /** Create a BUS8 display interface with scattered pins and 5 control pins
+    *
+    * @param buspins array of PinName to group as Bus
+    * , i.e PinName buspins[8]={PC_0,PC_1,PC_2,PC_3,D9,D8,D7,D6};
+    * @param CS pin connected to CS of display
+    * @param reset pin connected to RESET of display
+    * @param DC pin connected to data/command of display
+    * @param WR pin connected to SDI of display
+    * @param RD pin connected to RS of display 
+    */ 
+    BUS8(PinName* buspins, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD);
+
+protected:
+  
+    /** Send 8bit command to display controller 
+    *
+    * @param cmd: byte to send  
+    *
+    */   
+    virtual void wr_cmd8(unsigned char cmd);
+    
+    /** Send 8bit data to display controller 
+    *
+    * @param data: byte to send   
+    *
+    */   
+    virtual void wr_data8(unsigned char data);
+    
+    /** Send 2x8bit command to display controller 
+    *
+    * @param cmd: halfword to send  
+    *
+    */   
+    virtual void wr_cmd16(unsigned short cmd);
+    
+    /** Send 2x8bit data to display controller 
+    *
+    * @param data: halfword to send   
+    *
+    */   
+    virtual void wr_data16(unsigned short data);
+    
+    /** Send 16bit pixeldata to display controller 
+    *
+    * @param data: halfword to send   
+    *
+    */   
+    virtual void wr_gram(unsigned short data);
+    
+    /** Send same 16bit pixeldata to display controller multiple times
+    *
+    * @param data: halfword to send
+    * @param count: how many
+    *
+    */   
+    virtual void wr_gram(unsigned short data, unsigned int count);
+    
+    /** Send array of pixeldata shorts to display controller
+    *
+    * @param data: unsigned short pixeldata array
+    * @param lenght: lenght (in shorts)
+    *
+    */   
+    virtual void wr_grambuf(unsigned short* data, unsigned int lenght);
+    
+    /** Read 16bit pixeldata from display controller (with dummy cycle)
+    *
+    * @param convert true/false. Convert 18bit to 16bit, some controllers returns 18bit
+    * @returns 16bit color
+    */ 
+    virtual unsigned short rd_gram(bool convert);
+    
+    /** Read 4x8bit register data (with dummy cycle)
+    * @param reg the register to read
+    * @returns data as uint
+    * 
+    */ 
+    virtual unsigned int rd_reg_data32(unsigned char reg);
+    
+    /** Read 3x8bit ExtendedCommands register data
+    * @param reg the register to read
+    * @returns data as uint
+    * @note EXTC regs (0xB0 to 0xFF) are read/write registers, for Parallel mode directly accessible in both directions
+    */ 
+    virtual unsigned int rd_extcreg_data32(unsigned char reg, unsigned char SPIreadenablecmd);
+    
+    /** ILI932x specific, does a dummy read cycle, number of bits is protocol dependent
+    * for PAR protocols: a signle RD bit toggle
+    * for SPI8: 8clocks
+    * for SPI16: 16 clocks
+    */   
+    virtual void dummyread ();
+    
+    /** ILI932x specific, select register for a successive write or read
+    *
+    * @param reg register to be selected
+    * @param forread false = a write next (default), true = a read next
+    * @note forread only used by SPI protocols
+    */   
+    virtual void reg_select(unsigned char reg, bool forread =false);
+    
+    /** ILI932x specific, write register with data
+    *
+    * @param reg register to write
+    * @param data 16bit data
+    */   
+    virtual void reg_write(unsigned char reg, unsigned short data);
+    
+    /** ILI932x specific, read register
+    *
+    * @param reg register to be read
+    * @returns 16bit register value
+    */ 
+    virtual unsigned short reg_read(unsigned char reg);
+    
+    /** HW reset sequence (without display init commands)   
+    */
+    virtual void hw_reset();
+    
+    /** Set ChipSelect high or low
+    * @param enable 0/1   
+    */
+    virtual void BusEnable(bool enable);
+  
+   
+
+private:
+
+    BusInOut _bus;
+    DigitalOut _CS; 
+    DigitalOut _reset;
+    DigitalOut _DC;
+    DigitalOut _WR;
+    DigitalOut _RD;
+  
+};
+#endif
\ No newline at end of file

--- a/Protocols/Protocols.h	Mon Mar 23 14:08:04 2015 +0000
+++ b/Protocols/Protocols.h	Tue Mar 31 21:14:48 2015 +0000
@@ -18,8 +18,10 @@
 /** Protocol types
 */
 enum proto_t {
-    PAR_8   /**< Parallel 8bit, pins 0 to 7 */
-    ,PAR_16 /**< Parallel 16bit, pins 0 to 15 */
+    PAR_8   /**< Parallel 8bit, port pins 0 to 7 */
+    ,PAR_16 /**< Parallel 16bit, port pins 0 to 15 */
+    ,BUS_8   /**< Parallel 8bit, scattered pins */
+    ,BUS_16   /**< Parallel 16bit, scattered pins */
     ,SPI_8  /**< SPI 8bit */
     ,SPI_16 /**< SPI 16bit */
 };