Basically i glued Peter Drescher and Simon Ford libs in a GraphicsDisplay class, then derived TFT or LCD class (which inherits Protocols class), then the most derived ones (Inits), which are per-display and are the only part needed to be adapted to diff hw.
Dependents: testUniGraphic_150217 maze_TFT_MMA8451Q TFT_test_frdm-kl25z TFT_test_NUCLEO-F411RE ... more
Protocols/I2C_bus.cpp
- Committer:
- Geremia
- Date:
- 2022-01-25
- Revision:
- 34:c66986d80f72
- Parent:
- 33:f87f06292637
File content as of revision 34:c66986d80f72:
/* mbed UniGraphic library - I2C protocol class
* Copyright (c) 2017 Peter Drescher
* Released under the MIT License: http://mbed.org/license/mit
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "I2C_bus.h"
I2C_bus::I2C_bus(int Hz, int address, PinName sda, PinName scl)
: _i2c(sda,scl)
{
_i2c.frequency(Hz);
_address = address;
//hw_reset();
}
void I2C_bus::wr_cmd8(unsigned char cmd)
{
char tmp[2];
tmp[0] = 0x00; //command
tmp[1] = cmd;
_i2c.write(_address,tmp,2);
}
void I2C_bus::wr_data8(unsigned char data)
{
_i2c.write(data); // write 8bit
}
void I2C_bus::wr_cmd16(unsigned short cmd)
{
char tmp[3];
tmp[0] = 00; //command
tmp[1] = cmd>>8;
tmp[2] = cmd&0xFF;
_i2c.write(_address,tmp,3);
}
void I2C_bus::wr_data16(unsigned short data)
{
_i2c.write(data>>8); // write 8bit
_i2c.write(data&0xFF); // write 8bit
}
void I2C_bus::wr_gram(unsigned short data)
{
_i2c.write(data>>8); // write 8bit
_i2c.write(data&0xFF); // write 8bit
}
void I2C_bus::wr_gram(unsigned short data, unsigned int count)
{
_i2c.start();
_i2c.write(_address);
_i2c.write(0x40); // data continue
if((data>>8)==(data&0xFF))
{
count<<=1;
while(count)
{
_i2c.write(data); // write 8bit
count--;
}
}
else
{
while(count)
{
_i2c.write(data>>8); // write 8bit
_i2c.write(data&0xFF); // write 8bit
count--;
}
}
_i2c.stop();
}
void I2C_bus::wr_grambuf(unsigned short* data, unsigned int lenght)
{
_i2c.start();
_i2c.write(_address);
_i2c.write(0x40); // data continue
while(lenght)
{
_i2c.write((*data)>>8); // write 8bit
_i2c.write((*data)&0xFF); // write 8bit
data++;
lenght--;
}
_i2c.stop();
}
void I2C_bus::hw_reset()
{
}
void I2C_bus::BusEnable(bool enable)
{
}
void I2C_bus::reg_select(unsigned char reg, bool forread)
{
}
unsigned int I2C_bus::rd_reg_data32(unsigned char reg)
{
return 0;
}
unsigned int I2C_bus::rd_extcreg_data32(unsigned char reg, unsigned char SPIreadenablecmd)
{
return 0;
}
void I2C_bus::dummyread()
{
}
unsigned short I2C_bus::rd_gram(bool convert)
{
return (0);
}
unsigned short I2C_bus::reg_read(unsigned char reg)
{
return (0);
}
void I2C_bus::reg_write(unsigned char reg, unsigned short data)
{
}
GraphicsDisplay

