GettingStarted_with_NucleoF401RE_mbed
stm32nucleof401re_05_lcd
Dependencies: mbed-os
Revision 0:579569ff83cb, committed 2020-02-07
- Comitter:
- perlatecnica
- Date:
- Fri Feb 07 08:37:50 2020 +0000
- Commit message:
- v1.0
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TextLCD/TextLCD.cpp Fri Feb 07 08:37:50 2020 +0000
@@ -0,0 +1,3793 @@
+/* mbed TextLCD Library, for a 4-bit LCD based on HD44780
+ * Copyright (c) 2007-2010, sford, http://mbed.org
+ * 2013, v01: WH, Added LCD types, fixed LCD address issues, added Cursor and UDCs
+ * 2013, v02: WH, Added I2C and SPI bus interfaces
+ * 2013, v03: WH, Added support for LCD40x4 which uses 2 controllers
+ * 2013, v04: WH, Added support for Display On/Off, improved 4bit bootprocess
+ * 2013, v05: WH, Added support for 8x2B, added some UDCs
+ * 2013, v06: WH, Added support for devices that use internal DC/DC converters
+ * 2013, v07: WH, Added support for backlight and include portdefinitions for LCD2004 Module from DFROBOT
+ * 2014, v08: WH, Refactored in Base and Derived Classes to deal with mbed lib change regarding 'NC' defined pins
+ * 2014, v09: WH/EO, Added Class for Native SPI controllers such as ST7032
+ * 2014, v10: WH, Added Class for Native I2C controllers such as ST7032i, Added support for MCP23008 I2C portexpander, Added support for Adafruit module
+ * 2014, v11: WH, Added support for native I2C controllers such as PCF21XX, Improved the _initCtrl() method to deal with differences between all supported controllers
+ * 2014, v12: WH, Added support for native I2C controller PCF2119 and native I2C/SPI controllers SSD1803, ST7036, added setContrast method (by JH1PJL) for supported devices (eg ST7032i)
+ * 2014, v13: WH, Added support for controllers US2066/SSD1311 (OLED), added setUDCBlink() method for supported devices (eg SSD1803), fixed issue in setPower()
+ * 2014, v14: WH, Added support for PT6314 (VFD), added setOrient() method for supported devices (eg SSD1803, US2066), added Double Height lines for supported devices,
+ * added 16 UDCs for supported devices (eg PCF2103), moved UDC defines to TextLCD_UDC file, added TextLCD_Config.h for feature and footprint settings.
+ * 2014, v15: WH, Added AC780 support, added I2C expander modules, fixed setBacklight() for inverted logic modules. Fixed bug in LCD_SPI_N define
+ * 2014, v16: WH, Added ST7070 and KS0073 support, added setIcon(), clrIcon() and setInvert() method for supported devices
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+#include "mbed.h"
+#include "TextLCD.h"
+#include "TextLCD_UDC.inc"
+
+/** Create a TextLCD_Base interface
+ *
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param ctrl LCD controller (default = HD44780)
+ */
+TextLCD_Base::TextLCD_Base(LCDType type, LCDCtrl ctrl) : _type(type), _ctrl(ctrl) {
+
+ // Extract LCDType data
+
+ // Columns encoded in b7..b0
+ _nr_cols = (_type & 0xFF);
+
+ // Rows encoded in b15..b8
+ _nr_rows = ((_type >> 8) & 0xFF);
+
+ // Addressing mode encoded in b19..b16
+ _addr_mode = _type & LCD_T_ADR_MSK;
+}
+
+/** Init the LCD Controller(s)
+ * Clear display
+ * @param _LCDDatalength dl sets the datalength of data/commands
+ * @return none
+ */
+void TextLCD_Base::_init(_LCDDatalength dl) {
+
+ // Select and configure second LCD controller when needed
+ if(_type==LCD40x4) {
+ _ctrl_idx=_LCDCtrl_1; // Select 2nd controller
+ _initCtrl(dl); // Init 2nd controller
+ }
+
+ // Select and configure primary LCD controller
+ _ctrl_idx=_LCDCtrl_0; // Select primary controller
+ _initCtrl(dl); // Init primary controller
+
+ // Clear whole display and Reset Cursor location
+ // Note: This will make sure that some 3-line displays that skip topline of a 4-line configuration
+ // are cleared and init cursor correctly.
+ cls();
+}
+
+/** Init the LCD controller
+ * Set number of lines, fonttype, no cursor etc
+ * The controller is accessed in 4-bit parallel mode either directly via mbed pins or through I2C or SPI expander.
+ * Some controllers also support native I2C or SPI interfaces.
+ *
+ * @param _LCDDatalength dl sets the 4 or 8 bit datalength of data/commands. Required for some native serial modes.
+ * @return none
+ *
+ * Note: some configurations are commented out because they have not yet been tested due to lack of hardware
+ */
+void TextLCD_Base::_initCtrl(_LCDDatalength dl) {
+ int _bias_lines=0; // Set Bias and lines (Instr Set 1), temporary variable.
+ int _lines=0; // Set lines (Ext Instr Set), temporary variable.
+
+ this->_setRS(false); // command mode
+
+ wait_ms(20); // Wait 20ms to ensure powered up
+
+ // The Controller could be in 8 bit mode (power-on reset) or in 4 bit mode (warm reboot) at this point.
+ // Follow this procedure to make sure the Controller enters the correct state. The hardware interface
+ // between the uP and the LCD can only write the 4 most significant bits (Most Significant Nibble, MSN).
+ // In 4 bit mode the LCD expects the MSN first, followed by the LSN.
+ //
+ // Current state: 8 bit mode | 4 bit mode, MSN is next | 4 bit mode, LSN is next
+ //-------------------------------------------------------------------------------------------------
+ _writeNibble(0x3); // set 8 bit mode (MSN) and dummy LSN, | set 8 bit mode (MSN), | set dummy LSN,
+ // remains in 8 bit mode | change to 8 bit mode | remains in 4 bit mode
+ wait_ms(15); //
+
+ _writeNibble(0x3); // set 8 bit mode and dummy LSN, | set 8 bit mode and dummy LSN, | set 8bit mode (MSN),
+ // remains in 8 bit mode | remains in 8 bit mode | remains in 4 bit mode
+ wait_ms(15); //
+
+ _writeNibble(0x3); // set 8 bit mode and dummy LSN, | set 8 bit mode and dummy LSN, | set dummy LSN,
+ // remains in 8 bit mode | remains in 8 bit mode | change to 8 bit mode
+ wait_ms(15); //
+
+ // Controller is now in 8 bit mode
+
+ _writeNibble(0x2); // Change to 4-bit mode (MSN), the LSN is undefined dummy
+ wait_us(40); // most instructions take 40us
+
+ // Display is now in 4-bit mode
+ // Note: 4/8 bit mode is ignored for most native SPI and I2C devices. They dont use the parallel bus.
+ // However, _writeNibble() method is void anyway for native SPI and I2C devices.
+
+ // Device specific initialisations: DC/DC converter to generate VLCD or VLED, number of lines etc
+ switch (_ctrl) {
+
+ case KS0073:
+ // Initialise Display configuration
+ switch (_type) {
+ case LCD8x1: //8x1 is a regular 1 line display
+ case LCD12x1:
+ case LCD16x1:
+ case LCD20x1:
+ case LCD24x1:
+// case LCD32x1: // EXT pin is High, extension driver needed
+// case LCD40x1: // EXT pin is High, extension driver needed
+ _function = 0x02; // Function set 001 DL N RE(0) DH REV (Std Regs)
+ // DL=0 (4 bits bus)
+ // N=0 (1-line mode, N=1 2-line mode)
+ // RE=0 (Dis. Extended Regs, special mode for KS0073)
+ // DH=1 (Disp shift enable, special mode for KS0073)
+ // REV=0 (Reverse normal, special mode for KS0073)
+
+ _function_1 = 0x04; // Function set 001 DL N RE(1) BE LP (Ext Regs)
+ // DL=0 (4 bits bus)
+ // N=0 (1-line mode, N=1 2-line mode)
+ // RE=1 (Ena Extended Regs, special mode for KS0073)
+ // BE=0 (Blink Enable, CG/SEG RAM, special mode for KS0073)
+ // LP=0 (LP=1 Low power mode, LP=0 Normal)
+
+ _function_x = 0x00; // Ext Function set 0000 1 FW BW NW (Ext Regs)
+ // NW=0 (1,2 line), NW=1 (4 Line, special mode for KS0073)
+ break;
+
+// case LCD12x3D: // Special mode for KS0073, KS0078 and PCF21XX
+// case LCD12x3D1: // Special mode for KS0073, KS0078 and PCF21XX
+ case LCD12x4D: // Special mode for KS0073, KS0078 and PCF21XX
+// case LCD16x3D: // Special mode for KS0073, KS0078
+// case LCD16x4D: // Special mode for KS0073, KS0078
+ case LCD20x4D: // Special mode for KS0073, KS0078
+ _function = 0x02; // Function set 001 DL N RE(0) DH REV (Std Regs)
+ // DL=0 (4 bits bus)
+ // N=0 (dont care for 4 line mode)
+ // RE=0 (Dis. Extended Regs, special mode for KS0073)
+ // DH=1 (Disp shift enable, special mode for KS0073)
+ // REV=0 (Reverse normal, special mode for KS0073)
+
+ _function_1 = 0x04; // Function set 001 DL N RE(1) BE LP (Ext Regs)
+ // DL=0 (4 bits bus)
+ // N=0 (1-line mode), N=1 (2-line mode)
+ // RE=1 (Ena Extended Regs, special mode for KS0073)
+ // BE=0 (Blink Enable, CG/SEG RAM, special mode for KS0073)
+ // LP=0 (LP=1 Low power mode, LP=0 Normal)
+
+ _function_x = 0x01; // Ext Function set 0000 1 FW BW NW (Ext Regs)
+ // NW=0 (1,2 line), NW=1 (4 Line, special mode for KS0073)
+ break;
+
+
+ case LCD16x3G: // Special mode for ST7036
+// case LCD24x3D: // Special mode for KS0078
+// case LCD24x3D1: // Special mode for KS0078
+ case LCD24x4D: // Special mode for KS0078
+ error("Error: LCD Controller type does not support this Display type\n\r");
+ break;
+
+ default:
+ // All other LCD types are initialised as 2 Line displays (including LCD16x1C and LCD40x4)
+ _function = 0x0A; // Function set 001 DL N RE(0) DH REV (Std Regs)
+ // DL=0 (4 bits bus)
+ // N=1 (2-line mode), N=0 (1-line mode)
+ // RE=0 (Dis. Extended Regs, special mode for KS0073)
+ // DH=1 (Disp shift enable, special mode for KS0073)
+ // REV=0 (Reverse normal, special mode for KS0073)
+
+ _function_1 = 0x0C; // Function set 001 DL N RE(1) BE LP (Ext Regs)
+ // DL=0 (4 bits bus)
+ // N=1 (2 line mode), N=0 (1-line mode)
+ // RE=1 (Ena Extended Regs, special mode for KS0073)
+ // BE=0 (Blink Enable, CG/SEG RAM, special mode for KS0073)
+ // LP=0 (LP=1 Low power mode, LP=0 Normal)
+
+ _function_x = 0x00; // Ext Function set 0000 1 FW BW NW (Ext Regs)
+ // NW=0 (1,2 line), NW=1 (4 Line, special mode for KS0073)
+ break;
+ } // switch type
+
+ // init special features
+ _writeCommand(0x20 | _function_1);// Function set 001 DL N RE(1) BE LP (Ext Regs)
+ // DL=0 (4 bits bus), DL=1 (8 bits mode)
+ // N=0 (1 line mode), N=1 (2 line mode)
+ // RE=1 (Ena Extended Regs, special mode for KS0073)
+ // BE=0 (Blink Enable/Disable, CG/SEG RAM, special mode for KS0073)
+ // LP=0 (LP=1 Low power mode, LP=0 Normal)
+
+ _writeCommand(0x08 | _function_x); // Ext Function set 0000 1 FW BW NW (Ext Regs)
+ // FW=0 (5-dot font, special mode for KS0073)
+ // BW=0 (Cur BW invert disable, special mode for KS0073)
+ // NW=0 (1,2 Line), NW=1 (4 line, special mode for KS0073)
+
+ _writeCommand(0x10); // Scroll/Shift set 0001 DS/HS4 DS/HS3 DS/HS2 DS/HS1 (Ext Regs)
+ // Dotscroll/Display shift enable (Special mode for KS0073)
+
+ _writeCommand(0x80); // Scroll Quantity set 1 0 SQ5 SQ4 SQ3 SQ2 SQ1 SQ0 (Ext Regs)
+ // Scroll quantity (Special mode for KS0073)
+
+ _writeCommand(0x20 | _function); // Function set 001 DL N RE(0) DH REV (Std Regs)
+ // DL=0 (4 bits bus), DL=1 (8 bits mode)
+ // N=0 (1 line mode), N=1 (2 line mode)
+ // RE=0 (Dis. Extended Regs, special mode for KS0073)
+ // DH=1 (Disp shift enable/disable, special mode for KS0073)
+ // REV=0 (Reverse/Normal, special mode for KS0073)
+ break; // case KS0073 Controller
+
+
+ case KS0078:
+ // Initialise Display configuration
+ switch (_type) {
+ case LCD8x1: //8x1 is a regular 1 line display
+ case LCD8x2B: //8x2B is a special case of 16x1
+// case LCD12x1:
+ case LCD16x1:
+// case LCD20x1:
+ case LCD24x1:
+ _function = 0x02; // Function set 001 DL N RE(0) DH REV (Std Regs)
+ // DL=0 (4 bits bus)
+ // N=0 (1 line mode), N=1 (2 line mode)
+ // RE=0 (Dis. Extended Regs, special mode for KS0078)
+ // DH=1 (Disp shift enable, special mode for KS0078)
+ // REV=0 (Reverse normal, special mode for KS0078)
+
+ _function_1 = 0x04; // Function set 001 DL N RE(1) BE 0 (Ext Regs)
+ // DL=0 (4 bits bus)
+ // N=0 (1 line mode), N=1 (2 line mode)
+ // RE=1 (Ena Extended Regs, special mode for KS0078)
+ // BE=0 (Blink Enable, CG/SEG RAM, special mode for KS0078)
+ // 0
+
+ _function_x = 0x00; // Ext Function set 0000 1 FW BW NW (Ext Regs)
+ // NW=0 (1,2 line), NW=1 (4 Line, special mode for KS0078)
+ break;
+
+// case LCD12x3D: // Special mode for KS0073, KS0078 and PCF21XX
+// case LCD12x3D1: // Special mode for KS0073, KS0078 and PCF21XX
+// case LCD12x4D: // Special mode for KS0073, KS0078 and PCF21XX
+// case LCD16x3D: // Special mode for KS0073, KS0078
+// case LCD16x4D: // Special mode for KS0073, KS0078
+// case LCD20x4D: // Special mode for KS0073, KS0078
+// case LCD24x3D: // Special mode for KS0078
+// case LCD24x3D1: // Special mode for KS0078
+ case LCD24x4D: // Special mode for KS0078
+ _function = 0x02; // Function set 001 DL N RE(0) DH REV (Std Regs)
+ // DL=0 (4 bits bus)
+ // N=0 (dont care for 4 line mode)
+ // RE=0 (Dis. Extended Regs, special mode for KS0078)
+ // DH=1 (Disp shift enable, special mode for KS0078)
+ // REV=0 (Reverse normal, special mode for KS0078)
+
+ _function_1 = 0x04; // Function set 001 DL N RE(1) BE 0 (Ext Regs)
+ // DL=0 (4 bits bus)
+ // N=0 (1 line mode), N=1 (2 line mode)
+ // RE=1 (Ena Extended Regs, special mode for KS0078)
+ // BE=0 (Blink Enable, CG/SEG RAM, special mode for KS0078)
+ // 0
+
+ _function_x = 0x01; // Ext Function set 0000 1 FW BW NW (Ext Regs)
+ // NW=0 (1,2 line), NW=1 (4 Line, special mode for KS0078)
+ break;
+
+ case LCD16x3G: // Special mode for ST7036
+ error("Error: LCD Controller type does not support this Display type\n\r");
+ break;
+
+ default:
+ // All other LCD types are initialised as 2 Line displays (including LCD16x1C and LCD40x4)
+ _function = 0x0A; // Function set 001 DL N RE(0) DH REV (Std Regs)
+ // DL=0 (4 bits bus)
+ // N=1 (1 line mode), N=1 (2 line mode)
+ // RE=0 (Dis. Extended Regs, special mode for KS0078)
+ // DH=1 (Disp shift enable, special mode for KS0078)
+ // REV=0 (Reverse normal, special mode for KS0078)
+
+ _function_1 = 0x0C; // Function set 001 DL N RE(1) BE 0 (Ext Regs)
+ // DL=0 (4 bits bus)
+ // N=1 (1 line mode), N=1 (2 line mode)
+ // RE=1 (Ena Extended Regs, special mode for KS0078)
+ // BE=0 (Blink Enable, CG/SEG RAM, special mode for KS0078)
+ // 0
+
+ _function_x = 0x00; // Ext Function set 0000 1 FW BW NW (Ext Regs)
+ // NW=0 (1,2 line), NW=1 (4 Line, special mode for KS0078)
+ break;
+ } // switch type
+
+ // init special features
+ _writeCommand(0x20 | _function_1);// Function set 001 DL N RE(1) BE 0 (Ext Regs)
+ // DL=0 (4 bits bus), DL=1 (8 bits mode)
+ // N=0 (1 line mode), N=1 (2 line mode)
+ // RE=1 (Ena Extended Regs, special mode for KS0078)
+ // BE=0 (Blink Enable/Disable, CG/SEG RAM, special mode for KS0078)
+ // 0
+
+ _writeCommand(0x08 | _function_x); // Ext Function set 0000 1 FW BW NW (Ext Regs)
+ // FW=0 (5-dot font, special mode for KS0078)
+ // BW=0 (Cur BW invert disable, special mode for KS0078)
+ // NW=0 (1,2 Line), NW=1 (4 line, special mode for KS0078)
+
+ _writeCommand(0x10); // Scroll/Shift set 0001 DS/HS4 DS/HS3 DS/HS2 DS/HS1 (Ext Regs)
+ // Dotscroll/Display shift enable (Special mode for KS0078)
+
+ _writeCommand(0x80); // Scroll Quantity set 1 0 SQ5 SQ4 SQ3 SQ2 SQ1 SQ0 (Ext Regs)
+ // Scroll quantity (Special mode for KS0078)
+
+ _writeCommand(0x20 | _function); // Function set 001 DL N RE(0) DH REV (Std Regs)
+ // DL=0 (4 bits bus), DL=1 (8 bits mode)
+ // N=0 (1 line mode), N=1 (2 line mode)
+ // RE=0 (Dis. Extended Regs, special mode for KS0078)
+ // DH=1 (Disp shift enable/disable, special mode for KS0078)
+ // REV=0 (Reverse/Normal, special mode for KS0078)
+ break; // case KS0078 Controller
+
+ case ST7032_3V3:
+ // ST7032 controller: Initialise Voltage booster for VLCD. VDD=3V3
+ case ST7032_5V:
+ // ST7032 controller: Disable Voltage booster for VLCD. VDD=5V
+
+ // Initialise Display configuration
+ switch (_type) {
+ case LCD8x1: //8x1 is a regular 1 line display
+ case LCD8x2B: //8x2B is a special case of 16x1
+// case LCD12x1:
+ case LCD16x1:
+// case LCD20x1:
+ case LCD24x1:
+ _function = 0x00; // FUNCTION SET 0 0 1 DL=0 (4 bit), N=0 (1-line display mode), F=0 (5*7dot), 0, IS
+ // Note: 4 bit mode is ignored for native SPI and I2C devices
+ // Saved to allow switch between Instruction sets at later time
+ break;
+
+ case LCD12x3D: // Special mode for KS0078 and PCF21XX
+ case LCD12x3D1: // Special mode for KS0078 and PCF21XX
+ case LCD12x4D: // Special mode for KS0078 and PCF21XX
+ case LCD16x3G: // Special mode for ST7036
+ case LCD24x4D: // Special mode for KS0078
+ error("Error: LCD Controller type does not support this Display type\n\r");
+ break;
+
+ default:
+ // All other LCD types are initialised as 2 Line displays
+ _function = 0x08; // FUNCTION SET 0 0 1 DL=0 (4 bit), N=1 (2-line display mode), F=0 (5*7dot), 0, IS
+ // Note: 4 bit mode is ignored for native SPI and I2C devices
+ // Saved to allow switch between Instruction sets at later time
+ break;
+ } // switch type
+
+ // init special features
+ _writeCommand(0x20 | _function | 0x01); // Set function, 0 0 1 DL N F 0 IS=1 Select Instr Set = 1
+
+ _writeCommand(0x1C); // Internal OSC frequency adjustment Framefreq=183HZ, Bias will be 1/4 (Instr Set=1)
+
+ _contrast = LCD_ST7032_CONTRAST;
+ _writeCommand(0x70 | (_contrast & 0x0F)); // Set Contrast Low bits, 0 1 1 1 C3 C2 C1 C0 (IS=1)
+
+
+ if (_ctrl == ST7032_3V3) {
+// _icon_power = 0x04; // Icon display off, Booster circuit is turned on (IS=1)
+ _icon_power = 0x0C; // Icon display on, Booster circuit is turned on (IS=1)
+ // Saved to allow contrast change at later time
+ }
+ else {
+// _icon_power = 0x00; // Icon display off, Booster circuit is turned off (IS=1)
+ _icon_power = 0x08; // Icon display on, Booster circuit is turned off (IS=1)
+ // Saved to allow contrast change at later time
+ }
+ _writeCommand(0x50 | _icon_power | ((_contrast >> 4) & 0x03)); // Set Icon, Booster and Contrast High bits, 0 1 0 1 Ion Bon C5 C4 (IS=1)
+ wait_ms(10); // Wait 10ms to ensure powered up
+
+ _writeCommand(0x68 | (LCD_ST7032_RAB & 0x07)); // Voltage follower, 0 1 1 0 FOn=1, Ampl ratio Rab2=1, Rab1=0, Rab0=0 (IS=1)
+ wait_ms(10); // Wait 10ms to ensure powered up
+
+ _writeCommand(0x20 | _function); // Select Instruction Set = 0
+
+ break; // case ST7032_3V3 Controller
+ // case ST7032_5V Controller
+
+ case ST7036_3V3:
+ // ST7036 controller: Initialise Voltage booster for VLCD. VDD=3V3
+ // Note: supports 1,2 (LCD_T_A) or 3 lines (LCD_T_G)
+ case ST7036_5V:
+ // ST7036 controller: Disable Voltage booster for VLCD. VDD=5V
+ // Note: supports 1,2 (LCD_T_A) or 3 lines (LCD_T_G)
+
+ // Initialise Display configuration
+ switch (_type) {
+ case LCD8x1: //8x1 is a regular 1 line display
+ case LCD8x2B: //8x2D is a special case of 16x1
+// case LCD12x1:
+ case LCD16x1:
+ case LCD24x1:
+ _function = 0x00; // Set function, 0 0 1 DL=0 (4-bit Databus), N=0 (1 Line), DH=0 (5x7font), IS2, IS1 (Select Instruction Set)
+ // Note: 4 bit mode is ignored for native SPI and I2C devices
+ // Saved to allow switch between Instruction sets at later time
+
+ _bias_lines = 0x04; // Bias: 1/5, 1 or 2-Lines LCD
+ break;
+
+// case LCD12x3G: // Special mode for ST7036
+ case LCD16x3G: // Special mode for ST7036
+ _function = 0x08; // Set function, 0 0 1 DL=0 (4-bit Databus), N=1 (2 Line), DH=0 (5x7font), IS2,IS1 (Select Instruction Set)
+ // Note: 4 bit mode is ignored for native SPI and I2C devices
+ // Saved to allow switch between Instruction sets at later time
+
+ _bias_lines = 0x05; // Bias: 1/5, 3-Lines LCD
+ break;
+
+// case LCD12x3D1: // Special mode for KS0078 and PCF21XX
+// case LCD16x3D1: // Special mode for SSD1803
+ case LCD12x4D: // Special mode for PCF2116
+ case LCD24x4D: // Special mode for KS0078
+ error("Error: LCD Controller type does not support this Display type\n\r");
+ break;
+
+ default:
+ // All other LCD types are initialised as 2 Line displays (including LCD16x1C and LCD40x4)
+ _function = 0x08; // Set function, 0 0 1 DL=0 (4-bit Databus), N=1 (2 Line), DH=0 (5x7font), IS2,IS1 (Select Instruction Set)
+ // Note: 4 bit mode is ignored for native SPI and I2C devices
+ // Saved to allow switch between Instruction sets at later time
+
+ _bias_lines = 0x04; // Bias: 1/5, 1 or 2-Lines LCD
+ break;
+ } // switch type
+
+
+ // init special features
+ _writeCommand(0x20 | _function | 0x01); // Set function, IS2,IS1 = 01 (Select Instr Set = 1)
+ _writeCommand(0x10 | _bias_lines); // Set Bias and 1,2 or 3 lines (Instr Set 1)
+
+ _contrast = LCD_ST7036_CONTRAST;
+ _writeCommand(0x70 | (_contrast & 0x0F)); // Set Contrast, 0 1 1 1 C3 C2 C1 C0 (Instr Set 1)
+
+ if (_ctrl == ST7036_3V3) {
+ _icon_power = 0x0C; // Set Icon, Booster, Contrast High bits, 0 1 0 1 Ion=1 Bon=1 C5 C4 (Instr Set 1)
+// _icon_power = 0x04; // Set Icon, Booster, Contrast High bits, 0 1 0 1 Ion=0 Bon=1 C5 C4 (Instr Set 1)
+ // Saved to allow contrast change at later time
+ }
+ else {
+ _icon_power = 0x08; // Set Icon, Booster, Contrast High bits, 0 1 0 1 Ion=1 Bon=0 C5 C4 (Instr Set 1)
+// _icon_power = 0x00; // Set Icon, Booster, Contrast High bits, 0 1 0 1 Ion=0 Bon=0 C5 C4 (Instr Set 1)
+ }
+
+ _writeCommand(0x50 | _icon_power | ((_contrast >> 4) & 0x03)); // Set Contrast C5, C4 (Instr Set 1)
+ wait_ms(10); // Wait 10ms to ensure powered up
+
+ _writeCommand(0x68 | (LCD_ST7036_RAB & 0x07)); // Voltagefollower On = 1, Ampl ratio Rab2, Rab1, Rab0 = 1 0 1 (Instr Set 1)
+ wait_ms(10); // Wait 10ms to ensure powered up
+
+ _writeCommand(0x20 | _function); // Set function, IS2,IS1 = 00 (Select Instruction Set = 0)
+
+ break; // case ST7036_3V3 Controller
+ // case ST7036_5V Controller
+
+ case ST7070:
+ // Initialise Display configuration
+ switch (_type) {
+ case LCD8x1: //8x1 is a regular 1 line display
+ case LCD8x2B: //8x2D is a special case of 16x1
+// case LCD12x1:
+ case LCD16x1:
+ case LCD24x1:
+ _function = dl | 0x00; // Set function, 0 0 1 DL=0 (4-bit Databus), N=0 (1 Line), EXT=0, x, x
+ // Note: 4 bit mode is NOT ignored for native SPI !
+ // Saved to allow switch between Instruction sets at later time
+ break;
+
+// case LCD12x3D1: // Special mode for KS0078 and PCF21XX
+// case LCD16x3D1: // Special mode for SSD1803
+ case LCD12x4D: // Special mode for PCF2116
+ case LCD24x4D: // Special mode for KS0078
+// case LCD12x3G: // Special mode for ST7036
+ case LCD16x3G: // Special mode for ST7036
+ error("Error: LCD Controller type does not support this Display type\n\r");
+ break;
+
+ default:
+ // All other LCD types are initialised as 2 Line displays (including LCD16x1C and LCD40x4)
+ _function = dl | 0x08; // Set function, 0 0 1 DL, N=1 (2 Line), EXT=0, x, x
+ // Note: 4 bit mode is NOT ignored for native SPI !
+ // Saved to allow switch between Instruction sets at later time
+ break;
+ } // switch type
+
+// _writeCommand(0x00); // NOP, make sure to sync SPI
+
+ // init special features
+ _writeCommand(0x20 | _function | 0x04); // Set function, 0 0 1 DL N EXT=1 x x (Select Instr Set = 1)
+
+ _writeCommand(0x04 | 0x00); // Set Bias resistors 0 0 0 0 0 1 Rb1,Rb0= 0 0 (Extern Res) (Instr Set 1)
+
+ _writeCommand(0x40 | 0x00); // COM/SEG directions 0 1 0 0 C1, C2, S1, S2 (Instr Set 1)
+ // C1=1: Com1-8 -> Com8-1; C2=1: Com9-16 -> Com16-9
+ // S1=1: Seg1-40 -> Seg40-1; S2=1: Seg41-80 -> Seg80-41
+
+ _writeCommand(0x20 | _function); // Set function, EXT=0 (Select Instr Set = 0)
+
+ break; // case ST7070 Controller
+
+ case SSD1803_3V3:
+ // SSD1803 controller: Initialise Voltage booster for VLCD. VDD=3V3
+ // Note: supports 1,2, 3 or 4 lines
+// case SSD1803_5V:
+ // SSD1803 controller: No Voltage booster for VLCD. VDD=5V
+
+ // Initialise Display configuration
+ switch (_type) {
+ case LCD8x1: //8x1 is a regular 1 line display
+ case LCD8x2B: //8x2D is a special case of 16x1
+// case LCD12x1:
+ case LCD16x1:
+ case LCD24x1:
+ _function = 0x00; // Set function 0 0 1 DL N DH RE(0) IS
+ // Saved to allow switch between Instruction sets at later time
+ // DL=0 4-bit Databus,
+ // Note: 4 bit mode is ignored for native SPI and I2C devices
+ // N=0 1 Line / 3 Line
+ // DH=0 Double Height disable
+ // IS=0
+
+ _function_1 = 0x02; // Set function, 0 0 1 DL N BE RE(1) REV
+ // Saved to allow switch between Instruction sets at later time
+ // DL=0 4-bit Databus,
+ // Note: 4 bit mode is ignored for native SPI and I2C devices
+ // N=0 1 Line / 3 Line
+ // BE=0 Blink Enable off, special feature of SSD1803
+ // REV=0 Reverse off, special feature of SSD1803
+
+ _lines = 0x00; // Ext function set 0 0 0 0 1 FW BW NW
+ // NW=0 1-Line LCD (N=0)
+ break;
+
+ case LCD12x3D: // Special mode for KS0078 and PCF21XX
+// case LCD12x3D1: // Special mode for KS0078 and PCF21XX
+ case LCD16x3D: // Special mode for KS0078
+// case LCD16x3D1: // Special mode for SSD1803
+// case LCD20x3D: // Special mode for SSD1803
+ _function = 0x00; // Set function 0 0 1 DL N DH RE(0) IS
+ // Saved to allow switch between Instruction sets at later time
+ // DL=0 4-bit Databus,
+ // Note: 4 bit mode is ignored for native SPI and I2C devices
+ // N=0 1 Line / 3 Line
+ // DH=0 Double Height disable
+ // IS=0
+
+ _function_1 = 0x02; // Set function, 0 0 1 DL N BE RE(1) REV
+ // Saved to allow switch between Instruction sets at later time
+ // DL=0 4-bit Databus,
+ // Note: 4 bit mode is ignored for native SPI and I2C devices
+ // N=0 1 Line / 3 Line
+ // BE=0 Blink Enable off, special feature of SSD1803
+ // REV=0 Reverse off, special feature of SSD1803
+
+ _lines = 0x00; // Ext function set 0 0 0 0 1 FW BW NW
+ // NW=1 3-Line LCD (N=0)
+ break;
+
+ case LCD20x4D: // Special mode for SSD1803
+ _function = 0x08; // Set function 0 0 1 DL N DH RE(0) IS
+ // Saved to allow switch between Instruction sets at later time
+ // DL=0 4-bit Databus,
+ // Note: 4 bit mode is ignored for native SPI and I2C devices
+ // N=1 4 Line
+ // DH=0 Double Height disable
+ // IS=0
+
+ _function_1 = 0x0A; // Set function, 0 0 1 DL N BE RE(1) REV
+ // Saved to allow switch between Instruction sets at later time
+ // DL=0 4-bit Databus,
+ // Note: 4 bit mode is ignored for native SPI and I2C devices
+ // N=1 4 Line
+ // BE=0 Blink Enable off, special feature of SSD1803
+ // REV=0 Reverse off, special feature of SSD1803
+
+ _lines = 0x01; // Ext function set 0 0 0 0 1 FW BW NW
+ // NW=1 4-Line LCD (N=1)
+ break;
+
+ case LCD16x3G: // Special mode for ST7036
+ case LCD24x4D: // Special mode for KS0078
+ error("Error: LCD Controller type does not support this Display type\n\r");
+ break;
+
+ default:
+ // All other LCD types are initialised as 2 Line displays (including LCD16x1C and LCD40x4)
+ _function = 0x08; // Set function 0 0 1 DL N DH RE(0) IS
+ // Saved to allow switch between Instruction sets at later time
+ // DL=0 4-bit Databus,
+ // Note: 4 bit mode is ignored for native SPI and I2C devices
+ // N=1 2 line / 4 Line
+ // DH=0 Double Height disable
+ // RE=0
+ // IS=0
+
+ _function_1 = 0x0A; // Set function, 0 0 1 DL N BE RE(1) REV
+ // Saved to allow switch between Instruction sets at later time
+ // DL=0 4-bit Databus,
+ // Note: 4 bit mode is ignored for native SPI and I2C devices
+ // N=1 2 line / 4 Line
+ // BE=0 Blink Enable off, special feature of SSD1803
+ // RE=1
+ // REV=0 Reverse off, special feature of SSD1803
+
+ _lines = 0x00; // Ext function set 0 0 0 0 1 FW BW NW
+ // NW=0 2-Line LCD (N=1)
+ break;
+ } // switch type
+
+
+ // init special features
+ _writeCommand(0x20 | _function_1); // Set function, 0 0 1 DL N BE RE(1) REV
+ // Select Extended Instruction Set
+
+ _writeCommand(0x06); // Set ext entry mode, 0 0 0 0 0 1 BDC=1 COM1-32, BDS=0 SEG100-1 "Bottom View" (Ext Instr Set)
+// _writeCommand(0x05); // Set ext entry mode, 0 0 0 0 0 1 BDC=0 COM32-1, BDS=1 SEG1-100 "Top View" (Ext Instr Set)
+ wait_ms(5); // Wait to ensure completion or SSD1803 fails to set Top/Bottom after reset..
+
+ _writeCommand(0x08 | _lines); // Set ext function 0 0 0 0 1 FW BW NW 1,2,3 or 4 lines (Ext Instr Set)
+
+ _writeCommand(0x10); // Double Height and Bias, 0 0 0 1 UD2=0, UD1=0, BS1=0 Bias 1/5, DH=0 (Ext Instr Set)
+
+// _writeCommand(0x76); // Set TC Control, 0 1 1 1 0 1 1 0 (Ext Instr Set)
+// _writeData(0x02); // Set TC data, 0 0 0 0 0 TC2,TC1,TC0 = 0 1 0 (Ext Instr Set)
+
+ _writeCommand(0x20 | _function | 0x01); // Set function, 0 0 1 DL N DH RE(0) IS=1 Select Instruction Set 1
+ // Select Std Instr set, Select IS=1
+
+ _contrast = LCD_SSD1_CONTRAST;
+ _writeCommand(0x70 | (_contrast & 0x0F)); // Set Contrast 0 1 1 1 C3, C2, C1, C0 (Instr Set 1)
+
+// _icon_power = 0x04; // Icon off, Booster on (Instr Set 1)
+ _icon_power = 0x0C; // Icon on, Booster on (Instr Set 1)
+ // Saved to allow contrast change at later time
+ _writeCommand(0x50 | _icon_power | ((_contrast >> 4) & 0x03)); // Set Power, Icon and Contrast, 0 1 0 1 Ion Bon C5 C4 (Instr Set 1)
+ wait_ms(10); // Wait 10ms to ensure powered up
+
+ _writeCommand(0x68 | (LCD_SSD1_RAB & 0x07)); // Set Voltagefollower 0 1 1 0 Don = 1, Ampl ratio Rab2, Rab1, Rab0 = 1 1 0 (Instr Set 1)
+ wait_ms(10); // Wait 10ms to ensure powered up
+
+ _writeCommand(0x20 | _function_1); // Set function, 0 0 1 DL N BE RE(1) REV
+ // Select Extended Instruction Set 1
+ _writeCommand(0x10); // Shift/Scroll enable, 0 0 0 1 DS4/HS4 DS3/HS3 DS2/HS2 DS1/HS1 (Ext Instr Set 1)
+
+
+ _writeCommand(0x20 | _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
+ // Select Std Instr set, Select IS=0
+
+ break; // case SSD1803 Controller
+
+
+ // Note1: The PCF21XX family of controllers has several types that dont have an onboard voltage generator for V-LCD.
+ // You must supply this LCD voltage externally and not try to enable VGen.
+ // Note2: The early versions of PCF2116 controllers (eg PCF2116C) can not generate sufficiently negative voltage for the LCD at a VDD of 3V3.
+ // You must supply this voltage externally and not enable VGen or you must use a higher VDD (e.g. 5V) and enable VGen.
+ // More recent versions of the controller (eg PCF2116K) have an improved VGen that will work with 3V3.
+ // Note3: See datasheet, PCF2116 and other types provide a V0 pin to control the LCD contrast voltage that is provided by VGen. This pins allows
+ // contrast control similar to that of pin 3 on the standard 14pin LCD module connector.
+ // You can disable VGen by connecting Vo to VDD. VLCD will then be used directly as LCD voltage.
+ // Note4: PCF2113 and PCF2119 are different wrt to VLCD generator! There is no V0 pin. The contrast voltage is software controlled by setting the VA and VB registers.
+ // Vgen is automatically switched off when the contrast voltage VA or VB is set to 0x00. Note that certain limits apply to allowed values for VA and VB.
+ // Note5: See datasheet, members of the PCF21XX family support different numbers of rows/columns. Not all can support 3 or 4 rows.
+ // Note6: See datasheet, the PCF21XX-C and PCF21XX-K use a non-standard character set. This may result is strange looking text when not corrected..
+
+ case PCF2103_3V3:
+ // PCF2103 controller: No Voltage generator for VLCD, VDD=3V3..5V, VLCD input controls contrast voltage.
+ // Initialise Display configuration
+ switch (_type) {
+ case LCD24x1:
+ _function = 0x00; //FUNCTION SET 0 0 1 DL=0 4-bit, 0, M=0 1-line/24 chars display mode, 0, H=0
+ //Note: 4 bit mode is ignored for I2C mode
+ break;
+
+// case LCD12x1D: //Special mode for PCF21XX, Only top line used
+ case LCD12x2:
+ _function = 0x04; //FUNCTION SET 0 0 1 DL=0 4-bit, 0, M=1 2-line/12 chars display mode, 0, H=0
+ //Note: 4 bit mode is ignored for I2C mode
+ break;
+
+ default:
+ error("Error: LCD Controller type does not support this Display type\n\r");
+ break;
+
+ } // switch type
+
+ _writeCommand(0x20 | _function | 0x01); // Set function, Select Instr Set = 1
+ wait_ms(10); // Wait 10ms to ensure powered up
+
+// Note: Display from GA628 shows 12 chars. This is actually the right half of a 24x1 display. The commons have been connected in reverse order.
+ _writeCommand(0x05); // Display Conf Set 0000 0, 1, P=0, Q=1 (Instr. Set 1)
+
+ _writeCommand(0x02); // Screen Config 0000 001, L=0 (Instr. Set 1)
+ _writeCommand(0x08); // ICON Conf 0000 1, IM=0 (Char mode), IB=0 (no Icon blink), 0 (Instr. Set 1)
+
+ _writeCommand(0x20 | _function); // Set function, Select Instr Set = 0
+
+#if(0)
+ // Select CG RAM
+ _writeCommand(0x40); //Set CG-RAM address, 8 sequential locations needed per UDC
+ // Store UDC/Icon pattern:
+ // 3 x 8 rows x 5 bits = 120 bits for Normal pattern (UDC 0..2) and
+ // 3 x 8 rows x 5 bits = 120 bits for Blink pattern (UDC 4..6)
+ for (int i=0; i<(8 * 8); i++) {
+// _writeData(0x1F); // All On
+ _writeData(0x00); // All Off
+ }
+#endif
+ break; // case PCF2103_3V3 Controller
+
+ case PCF2113_3V3:
+ // PCF2113 controller: Initialise Voltage booster for VLCD. VDD=3V3. VA and VB control contrast.
+ // Initialise Display configuration
+ switch (_type) {
+// case LCD12x1:
+// _function = 0x02; // FUNCTION SET 0 0 1 DL=0 4 bit, 0, M=0 1-line/12 chars display mode, SL=1, IS=0
+ // Note: 4 bit mode is ignored for I2C mode
+ case LCD24x1:
+ _function = 0x00; // FUNCTION SET 0 0 1 DL=0 4 bit, 0, M=0 1-line/24 chars display mode, SL=0, IS=0
+ // Note: 4 bit mode is ignored for I2C mode
+ break;
+
+ case LCD12x2:
+ _function = 0x04; // FUNCTION SET 0 0 1 DL=0 4 bit, 0, M=1 2-line/12 chars display mode, SL=0, IS=0
+ break;
+
+ default:
+ error("Error: LCD Controller type does not support this Display type\n\r");
+ break;
+
+ } // switch type
+
+ // Init special features
+ _writeCommand(0x20 | _function | 0x01); // Set function, Select Instr Set = 1
+
+ _writeCommand(0x04); // Display Conf Set 0000 0, 1, P=0, Q=0 (Instr. Set 1)
+ _writeCommand(0x10); // Temp Compensation Set 0001 0, 0, TC1=0, TC2=0 (Instr. Set 1)
+// _writeCommand(0x42); // HV GEN 0100 S1=1, S2=0 (2x multiplier) (Instr. Set 1)
+ _writeCommand(0x40 | (LCD_PCF2_S12 & 0x03)); // HV Gen 0100 S1=1, S2=0 (2x multiplier) (Instr. Set 1)
+
+ _contrast = LCD_PCF2_CONTRAST;
+ _writeCommand(0x80 | 0x00 | (_contrast & 0x3F)); // VLCD_set (Instr. Set 1) 1, V=0, VA=contrast
+ _writeCommand(0x80 | 0x40 | (_contrast & 0x3F)); // VLCD_set (Instr. Set 1) 1, V=1, VB=contrast
+ wait_ms(10); // Wait 10ms to ensure powered up
+
+ _writeCommand(0x02); // Screen Config 0000 001, L=0 (Instr. Set 1)
+ _writeCommand(0x08); // ICON Conf 0000 1, IM=0 (Char mode), IB=0 (no icon blink) DM=0 (no direct mode) (Instr. Set 1)
+
+ _writeCommand(0x20 | _function); // Set function, Select Instr Set = 0
+
+ break; // case PCF2113_3V3 Controller
+
+
+// case PCF2113_5V:
+ // PCF2113 controller: No Voltage generator for VLCD. VDD=5V. Contrast voltage controlled by VA or VB.
+//@TODO
+
+
+ case PCF2116_3V3:
+ // PCF2116 controller: Voltage generator for VLCD. VDD=5V. V0 controls contrast voltage.
+ // Initialise Display configuration
+ switch (_type) {
+// case LCD12x1:
+// case LCD12x2:
+ case LCD24x1:
+ _writeCommand(0x22); //FUNCTION SET 0 0 1 DL=0 4-bit, N=0/M=0 1-line/24 chars display mode, G=1 Vgen on, 0
+ //Note: 4 bit mode is ignored for I2C mode
+ wait_ms(10); // Wait 10ms to ensure powered up
+ break;
+
+ case LCD12x3D: // Special mode for KS0078 and PCF21XX
+ case LCD12x3D1: // Special mode for PCF21XX
+ case LCD12x4D: // Special mode for PCF21XX:
+ _writeCommand(0x2E); //FUNCTION SET 0 0 1 DL=0 4-bit, N=1/M=1 4-line/12 chars display mode, G=1 VGen on, 0
+ //Note: 4 bit mode is ignored for I2C mode
+ wait_ms(10); // Wait 10ms to ensure powered up
+ break;
+
+ case LCD24x2:
+ _writeCommand(0x2A); //FUNCTION SET 0 0 1 DL=0 4-bit, N=1/M=0 2-line/24 chars display mode, G=1 VGen on, 0
+ //Note: 4 bit mode is ignored for I2C mode
+ wait_ms(10); // Wait 10ms to ensure powered up
+ break;
+
+ default:
+ error("Error: LCD Controller type does not support this Display type\n\r");
+ break;
+
+ } // switch type
+
+ break; // case PCF2116_3V3 Controller
+
+
+//Experimental for cellphone 3-line display, SA=0x74, No Ack supported, Character set C or K, DL = 8 bit, N=0,M=1 (reserved mode !!), external VLCD -2V5
+//@TODO
+ case PCF2116_5V:
+ // PCF2116 controller: No Voltage generator for VLCD. VDD=5V. V0 controls contrast voltage.
+ // Initialise Display configuration
+ switch (_type) {
+// case LCD12x1:
+// case LCD12x2:
+// case LCD24x1:
+// _writeCommand(0x20); //FUNCTION SET 0 0 1 DL=0 4-bit, N=0/M=0 1-line/24 chars display mode, G=0 no Vgen, 0
+ //Note: 4 bit mode is ignored for I2C mode
+// wait_ms(10); // Wait 10ms to ensure powered up
+// break;
+
+ case LCD12x3D: // Special mode for KS0078 and PCF21XX
+ case LCD12x3D1: // Special mode for PCF21XX
+ case LCD12x4D: // Special mode for PCF21XX:
+// _writeCommand(0x34); //FUNCTION SET 8 bit, N=0/M=1 4-line/12 chars display mode OK
+// _writeCommand(0x24); //FUNCTION SET 4 bit, N=0/M=1 4-line/12 chars display mode OK
+ _writeCommand(0x2C); //FUNCTION SET 0 0 1 DL=0 4-bit, N=1/M=1 4-line/12 chars display mode, G=0 no Vgen, 0 OK
+ //Note: 4 bit mode is ignored for I2C mode
+ wait_ms(10); // Wait 10ms to ensure powered up
+ break;
+
+// case LCD24x2:
+// _writeCommand(0x28); //FUNCTION SET 4 bit, N=1/M=0 2-line/24 chars display mode
+ //Note: 4 bit mode is ignored for I2C mode
+// wait_ms(10); // Wait 10ms to ensure powered up
+// break;
+
+ default:
+ error("Error: LCD Controller type does not support this Display type\n\r");
+ break;
+
+ } // switch type
+
+ break; // case PCF2116_5V Controller
+
+ case PCF2119_3V3:
+ // PCF2119 controller: Initialise Voltage booster for VLCD. VDD=3V3. VA and VB control contrast.
+ // Note1: See datasheet, the PCF2119 supports icons and provides separate constrast control for Icons and characters.
+ // Note2: Vgen is switched off when the contrast voltage VA or VB is set to 0x00.
+
+//POR or Hardware Reset should be applied
+ wait_ms(10); // Wait 10ms to ensure powered up
+
+ // Initialise Display configuration
+ switch (_type) {
+ case LCD8x1:
+// case LCD12x1:
+ case LCD16x1:
+ _function = 0x02; // FUNCTION SET 0 0 1 DL=0 4-bit, 0 , M=0 1-line/16 chars display mode, SL=1
+ // Note: 4 bit mode is ignored for I2C mode
+ break;
+
+ case LCD24x1:
+// case LCD32x1:
+ _function = 0x00; // FUNCTION SET 0 0 1 DL=0 4-bit, 0 , M=0 1-line/32 chars display mode, SL=0
+ // Note: 4 bit mode is ignored for I2C mode
+ break;
+
+ case LCD8x2:
+// case LCD12x2:
+ case LCD16x2:
+ _function = 0x04; // FUNCTION SET 0 0 1 DL=0 4-bit, 0, M=1 2-line/16 chars display mode, SL=0
+ // Note: 4 bit mode is ignored for I2C mode
+ break;
+
+ default:
+ error("Error: LCD Controller type does not support this Display type\n\r");
+ break;
+
+ } // switch type
+
+ // Init special features
+ _writeCommand(0x20 | _function | 0x01); // Set function, Select Instruction Set = 1
+
+ _writeCommand(0x04); // DISP CONF SET (Instr. Set 1) 0000, 0, 1, P=0, Q=0
+ _writeCommand(0x10); // TEMP CTRL SET (Instr. Set 1) 0001, 0, 0, TC1=0, TC2=0
+// _writeCommand(0x42); // HV GEN (Instr. Set 1) 0100, 0, 0, S1=1, S2=0 (2x multiplier)
+ _writeCommand(0x40 | (LCD_PCF2_S12 & 0x03)); // HV GEN (Instr. Set 1) 0100, 0, 0, S1=1, S2=0 (2x multiplier)
+
+ _contrast = LCD_PCF2_CONTRAST;
+ _writeCommand(0x80 | 0x00 | (_contrast & 0x3F)); // VLCD_set (Instr. Set 1) V=0, VA=contrast
+ _writeCommand(0x80 | 0x40 | (_contrast & 0x3F)); // VLCD_set (Instr. Set 1) V=1, VB=contrast
+ wait_ms(10); // Wait 10ms to ensure powered up
+
+ _writeCommand(0x02); // SCRN CONF (Instr. Set 1) L=0
+ _writeCommand(0x08); // ICON CONF (Instr. Set 1) IM=0 (Char mode) IB=0 (no icon blink) DM=0 (no direct mode)
+
+ _writeCommand(0x20 | _function); // Select Instruction Set = 0
+
+ break; // case PCF2119_3V3 Controller
+
+// case PCF2119_5V:
+ // PCF2119 controller: No Voltage booster for VLCD. VDD=3V3. VA and VB control contrast.
+ // Note1: See datasheet, the PCF2119 supports icons and provides separate constrast control for Icons and characters.
+ // Note2: Vgen is switched off when the contrast voltage VA or VB is set to 0x00.
+//@TODO
+
+ case WS0010:
+ // WS0010 OLED controller: Initialise DC/DC Voltage converter for LEDs
+ // Note1: Identical to RS0010
+ // Note2: supports 1 or 2 lines (and 16x100 graphics)
+ // supports 4 fonts (English/Japanese (default), Western European-I, English/Russian, Western European-II)
+ // Cursor/Disp shift set 0001 SC RL 0 0
+ //
+ // Mode and Power set 0001 GC PWR 1 1
+ // GC = 0 (Graph Mode=1, Char Mode=0)
+ // PWR = 1 (DC/DC On/Off)
+
+//@Todo: This may be needed to enable a warm reboot
+ //_writeCommand(0x13); // Char mode, DC/DC off
+ //wait_ms(10); // Wait 10ms to ensure powered down
+ _writeCommand(0x17); // Char mode, DC/DC on
+ wait_ms(10); // Wait 10ms to ensure powered up
+
+ // Initialise Display configuration
+ switch (_type) {
+ case LCD8x1: //8x1 is a regular 1 line display
+ case LCD8x2B: //8x2B is a special case of 16x1
+// case LCD12x1:
+ case LCD16x1:
+ case LCD24x1:
+ _writeCommand(0x20); // Function set 001 DL N F FT1 FT0
+ // DL=0 (4 bits bus)
+ // N=0 (1 line)
+ // F=0 (5x7 dots font)
+ // FT=00 (00 = Engl/Jap, 01 = WestEur1, 10 = Engl/Russian, 11 = WestEur2
+ break;
+
+ case LCD12x3D: // Special mode for KS0078 and PCF21XX
+ case LCD12x3D1: // Special mode for PCF21XX
+ case LCD12x4D: // Special mode for PCF21XX:
+ case LCD16x3G: // Special mode for ST7036
+ case LCD24x4D: // Special mode for KS0078
+ error("Error: LCD Controller type does not support this Display type\n\r");
+ break;
+
+ default:
+ // All other LCD types are initialised as 2 Line displays (including LCD16x1C and LCD40x4)
+ _writeCommand(0x28); // Function set 001 DL N F FT1 FT0
+ // DL=0 (4 bits bus)
+ // N=1 (2 lines)
+ // F=0 (5x7 dots font)
+ // FT=00 (00 = Engl/Jap, 01 = WestEur1, 10 = Engl/Russian, 11 = WestEur2
+
+ break;
+ } // switch type
+
+ break; // case WS0010 Controller
+
+
+ case US2066_3V3:
+ // US2066/SSD1311 OLED controller, Initialise for VDD=3V3
+ // Note: supports 1,2, 3 or 4 lines
+// case USS2066_5V:
+ // US2066 controller, VDD=5V
+
+ // Initialise Display configuration
+ switch (_type) {
+ case LCD8x1: //8x1 is a regular 1 line display
+ case LCD8x2B: //8x2D is a special case of 16x1
+// case LCD12x1:
+ case LCD16x1:
+// case LCD20x1:
+ _function = 0x00; // Set function 0 0 1 X N DH RE(0) IS
+ // Saved to allow switch between Instruction sets at later time
+ // DL=X bit is ignored for US2066. Uses hardwired pins instead
+ // N=0 1 Line / 3 Line
+ // DH=0 Double Height disable
+ // IS=0
+
+ _function_1 = 0x02; // Set function, 0 0 1 X N BE RE(1) REV
+ // Saved to allow switch between Instruction sets at later time
+ // DL=X bit is ignored for US2066. Uses hardwired pins instead
+ // N=0 1 Line / 3 Line
+ // BE=0 Blink Enable off, special feature of SSD1803, US2066
+ // REV=0 Reverse off, special feature of SSD1803, US2066
+
+ _lines = 0x00; // Ext function set 0 0 0 0 1 FW BW NW
+ // NW=0 1-Line LCD (N=0)
+ break;
+
+ case LCD16x1C:
+ case LCD8x2:
+ case LCD16x2:
+ case LCD20x2:
+ _function = 0x08; // Set function 0 0 1 X N DH RE(0) IS
+ // Saved to allow switch between Instruction sets at later time
+ // DL=X bit is ignored for US2066. Uses hardwired pins instead
+ // N=1 2 line / 4 Line
+ // DH=0 Double Height disable
+ // IS=0
+
+ _function_1 = 0x0A; // Set function, 0 0 1 X N BE RE(1) REV
+ // Saved to allow switch between Instruction sets at later time
+ // DL=X bit is ignored for US2066. Uses hardwired pins instead
+ // N=1 2 line / 4 Line
+ // BE=0 Blink Enable off, special feature of SSD1803, US2066
+ // REV=0 Reverse off, special feature of SSD1803, US2066
+
+ _lines = 0x00; // Ext function set 0 0 0 0 1 FW BW NW
+ // NW=0 2-Line LCD (N=1)
+ break;
+
+ case LCD12x3D: // Special mode for KS0078 and PCF21XX
+// case LCD12x3D1: // Special mode for KS0078 and PCF21XX
+ case LCD16x3D: // Special mode for KS0078, SSD1803 and US2066
+// case LCD16x3D1: // Special mode for SSD1803, US2066
+// case LCD20x3D: // Special mode for SSD1803, US2066
+ _function = 0x00; // Set function 0 0 1 X N DH RE(0) IS
+ // Saved to allow switch between Instruction sets at later time
+ // DL=X bit is ignored for US2066. Uses hardwired pins instead
+ // N=0 1 Line / 3 Line
+ // DH=0 Double Height disable
+ // IS=0
+
+ _function_1 = 0x02; // Set function, 0 0 1 X N BE RE(1) REV
+ // Saved to allow switch between Instruction sets at later time
+ // DL=X bit is ignored for US2066. Uses hardwired pins instead
+ // N=0 1 Line / 3 Line
+ // BE=0 Blink Enable off, special feature of SSD1803, US2066
+ // REV=0 Reverse off, special feature of SSD1803, US2066
+
+ _lines = 0x00; // Ext function set 0 0 0 0 1 FW BW NW
+ // NW=1 3-Line LCD (N=0)
+ break;
+
+ case LCD20x4D: // Special mode for SSD1803, US2066
+ _function = 0x08; // Set function 0 0 1 X N DH RE(0) IS
+ // Saved to allow switch between Instruction sets at later time
+ // DL=X bit is ignored for US2066. Uses hardwired pins instead
+ // N=1 2 line / 4 Line
+ // DH=0 Double Height disable
+ // IS=0
+
+ _function_1 = 0x0A; // Set function, 0 0 1 DL N BE RE(1) REV
+ // Saved to allow switch between Instruction sets at later time
+ // DL=0 bit is ignored for US2066. Uses hardwired pins instead
+ // N=1 2 line / 4 Line
+ // BE=0 Blink Enable off, special feature of SSD1803, US2066
+ // REV=0 Reverse off, special feature of SSD1803, US2066
+
+ _lines = 0x01; // Ext function set 0 0 0 0 1 FW BW NW
+ // NW=1 4-Line LCD (N=1)
+ break;
+
+// case LCD24x1:
+// case LCD16x3G: // Special mode for ST7036
+// case LCD24x4D: // Special mode for KS0078
+ default:
+ error("Error: LCD Controller type does not support this Display type\n\r");
+ break;
+
+ } // switch type
+
+ _writeCommand(0x00); // NOP, make sure to sync SPI
+
+ // init special features
+ _writeCommand(0x20 | _function_1); // Set function, 0 0 1 X N BE RE(1) REV
+ // Select Extended Instruction Set
+
+ _writeCommand(0x71); // Function Select A: 0 1 1 1 0 0 0 1 (Ext Instr Set)
+ _writeData(0x00); // Disable Internal VDD
+
+ _writeCommand(0x79); // Function Select OLED: 0 1 1 1 1 0 0 1 (Ext Instr Set)
+
+ _writeCommand(0xD5); // Display Clock Divide Ratio: 1 1 0 1 0 1 0 1 (Ext Instr Set, OLED Instr Set)
+ _writeCommand(0x70); // Display Clock Divide Ratio value: 0 1 1 1 0 0 0 0 (Ext Instr Set, OLED Instr Set)
+
+ _writeCommand(0x78); // Function Disable OLED: 0 1 1 1 1 0 0 0 (Ext Instr Set)
+
+// _writeCommand(0x06); // Set ext entry mode, 0 0 0 0 0 1 BDC=1 COM1-32, BDS=0 SEG100-1 "Bottom View" (Ext Instr Set)
+ _writeCommand(0x05); // Set ext entry mode, 0 0 0 0 0 1 BDC=0 COM32-1, BDS=1 SEG1-100 "Top View" (Ext Instr Set)
+
+ _writeCommand(0x08 | _lines); // Set ext function 0 0 0 0 1 FW BW NW 1,2,3 or 4 lines (Ext Instr Set)
+
+// _writeCommand(0x1C); // Double Height, 0 0 0 1 UD2=1, UD1=1, X, DH'=0 (Ext Instr Set)
+// // Default
+
+ _writeCommand(0x72); // Function Select B: 0 1 1 1 0 0 1 0 (Ext Instr Set)
+ _writeData(0x01); // Select ROM A (CGRAM 8, CGROM 248)
+
+ _writeCommand(0x79); // Function Select OLED: 0 1 1 1 1 0 0 1 (Ext Instr Set)
+
+ _writeCommand(0xDA); // Set Segm Pins Config: 1 1 0 1 1 0 1 0 (Ext Instr Set, OLED)
+ _writeCommand(0x10); // Set Segm Pins Config value: Altern Odd/Even, Disable Remap (Ext Instr Set, OLED)
+
+ _writeCommand(0xDC); // Function Select C: 1 1 0 1 1 1 0 0 (Ext Instr Set, OLED)
+// _writeCommand(0x00); // Set internal VSL, GPIO pin HiZ (always read low)
+ _writeCommand(0x80); // Set external VSL, GPIO pin HiZ (always read low)
+
+ _contrast = LCD_US20_CONTRAST;
+ _writeCommand(0x81); // Set Contrast Control: 1 0 0 0 0 0 0 1 (Ext Instr Set, OLED)
+ _writeCommand((_contrast << 2) | 0x03); // Set Contrast Value: 8 bits, use 6 bits for compatibility
+
+ _writeCommand(0xD9); // Set Phase Length: 1 1 0 1 1 0 0 1 (Ext Instr Set, OLED)
+ _writeCommand(0xF1); // Set Phase Length Value:
+
+ _writeCommand(0xDB); // Set VCOMH Deselect Lvl: 1 1 0 1 1 0 1 1 (Ext Instr Set, OLED)
+ _writeCommand(0x30); // Set VCOMH Deselect Value: 0.83 x VCC
+
+ wait_ms(10); // Wait 10ms to ensure powered up
+
+//Test Fade/Blinking. Hard Blink on/off, No fade in/out ??
+// _writeCommand(0x23); // Set (Ext Instr Set, OLED)
+// _writeCommand(0x3F); // Set interval 128 frames
+//End Test Blinking
+
+ _writeCommand(0x78); // Function Disable OLED: 0 1 1 1 1 0 0 0 (Ext Instr Set)
+
+ _writeCommand(0x20 | _function | 0x01); // Set function, 0 0 1 X N DH RE(0) IS=1 Select Instruction Set 1
+ // Select Std Instr set, Select IS=1
+
+ _writeCommand(0x20 | _function_1); // Set function, 0 0 1 X N BE RE(1) REV
+ // Select Ext Instr Set, IS=1
+ _writeCommand(0x10); // Shift/Scroll enable, 0 0 0 1 DS4/HS4 DS3/HS3 DS2/HS2 DS1/HS1 (Ext Instr Set, IS=1)
+
+ _writeCommand(0x20 | _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
+ // Select Std Instr set, Select IS=0
+ break; // case US2066/SSD1311 Controller
+
+ //not yet tested on hardware
+ case PT6314 :
+ // Initialise Display configuration
+ switch (_type) {
+ case LCD8x1: //8x1 is a regular 1 line display
+ case LCD8x2B: //8x2B is a special case of 16x1
+// case LCD12x1:
+ case LCD16x1:
+ case LCD20x1:
+ case LCD24x1:
+ _function = 0x00; // Function set 001 DL N X BR1 BR0
+ // DL=0 (4 bits bus)
+ // Note: 4 bit mode is ignored for native SPI and I2C devices
+ // N=0 (1 line)
+ // X
+ // BR1=0 (2 significant bits for brightness
+ // BR0=0
+ // 0x0 = 100%
+ // 0x1 = 75%
+ // 0x2 = 50%
+ // 0x3 = 25%
+
+ break;
+
+ // All other valid LCD types are initialised as 2 Line displays
+ case LCD8x2:
+ case LCD16x2:
+ case LCD20x2:
+ case LCD24x2:
+ _function = 0x08; // Function set 001 DL N X BR1 BR2
+ // DL=0 (4 bits bus)
+ // Note: 4 bit mode is ignored for native SPI and I2C devices
+ // N=1 (2 lines)
+ // X
+ // BR1=0 (2 significant bits for brightness
+ // BR0=0
+ break;
+
+ default:
+ error("Error: LCD Controller type does not support this Display type\n\r");
+ break;
+ } // switch type
+
+ _contrast = LCD_PT63_CONTRAST;
+ _writeCommand(0x20 | _function | ((~_contrast) >> 4)); // Invert and shift to use 2 MSBs
+ break; // case PT6314 Controller (VFD)
+
+ default:
+ // Devices fully compatible to HD44780 that do not use any DC/DC Voltage converters but external VLCD, no icons etc
+
+ // Initialise Display configuration
+ switch (_type) {
+ case LCD8x1: //8x1 is a regular 1 line display
+ case LCD8x2B: //8x2B is a special case of 16x1
+// case LCD12x1:
+ case LCD16x1:
+// case LCD20x1:
+ case LCD24x1:
+// case LCD40x1:
+ _function = 0x00; // Function set 001 DL N F - -
+ // DL=0 (4 bits bus)
+ // N=0 (1 line)
+ // F=0 (5x7 dots font)
+ break;
+
+ case LCD12x3D: // Special mode for KS0078 and PCF21XX
+ case LCD12x3D1: // Special mode for KS0078 and PCF21XX
+ case LCD12x4D: // Special mode for KS0078 and PCF21XX:
+ case LCD16x3D: // Special mode for KS0078
+// case LCD16x3D1: // Special mode for KS0078
+// case LCD24x3D: // Special mode for KS0078
+// case LCD24x3D1: // Special mode for KS0078
+ case LCD24x4D: // Special mode for KS0078
+ error("Error: LCD Controller type does not support this Display type\n\r");
+ break;
+
+ // All other LCD types are initialised as 2 Line displays (including LCD16x1C and LCD40x4)
+ default:
+ _function = 0x08; // Function set 001 DL N F - -
+ // DL=0 (4 bits bus)
+ // Note: 4 bit mode is ignored for native SPI and I2C devices
+ // N=1 (2 lines)
+ // F=0 (5x7 dots font, only option for 2 line display)
+ // - (Don't care)
+ break;
+ } // switch type
+
+ _writeCommand(0x20 | _function);
+ break; // case default Controller
+
+ } // switch Controller specific initialisations
+
+ // Controller general initialisations
+// _writeCommand(0x01); // cls, and set cursor to 0
+// wait_ms(10); // The CLS command takes 1.64 ms.
+// // Since we are not using the Busy flag, Lets be safe and take 10 ms
+
+ _writeCommand(0x02); // Return Home
+ // Cursor Home, DDRAM Address to Origin
+
+ _writeCommand(0x06); // Entry Mode 0000 0 1 I/D S
+ // Cursor Direction and Display Shift
+ // I/D=1 (Cur incr)
+ // S=0 (No display shift)
+
+ _writeCommand(0x14); // Cursor or Display shift 0001 S/C R/L x x
+ // S/C=0 Cursor moves
+ // R/L=1 Right
+ //
+
+// _writeCommand(0x0C); // Display Ctrl 0000 1 D C B
+// // Display On, Cursor Off, Blink Off
+
+ setCursor(CurOff_BlkOff);
+ setMode(DispOn);
+}
+
+
+/** Clear the screen, Cursor home.
+ */
+void TextLCD_Base::cls() {
+
+ // Select and configure second LCD controller when needed
+ if(_type==LCD40x4) {
+ _ctrl_idx=_LCDCtrl_1; // Select 2nd controller
+
+ // Second LCD controller Cursor always Off
+ _setCursorAndDisplayMode(_currentMode, CurOff_BlkOff);
+
+ // Second LCD controller Clearscreen
+ _writeCommand(0x01); // cls, and set cursor to 0
+ wait_ms(10); // The CLS command takes 1.64 ms.
+ // Since we are not using the Busy flag, Lets be safe and take 10 ms
+
+ _ctrl_idx=_LCDCtrl_0; // Select primary controller
+ }
+
+ // Primary LCD controller Clearscreen
+ _writeCommand(0x01); // cls, and set cursor to 0
+ wait_ms(10); // The CLS command takes 1.64 ms.
+ // Since we are not using the Busy flag, Lets be safe and take 10 ms
+
+ // Restore cursormode on primary LCD controller when needed
+ if(_type==LCD40x4) {
+ _setCursorAndDisplayMode(_currentMode,_currentCursor);
+ }
+
+ setAddress(0, 0); // Reset Cursor location
+ // Note: This is needed because some displays (eg PCF21XX) don't use line 0 in the '3 Line' mode.
+}
+
+/** Locate cursor to a screen column and row
+ *
+ * @param column The horizontal position from the left, indexed from 0
+ * @param row The vertical position from the top, indexed from 0
+ */
+void TextLCD_Base::locate(int column, int row) {
+
+ // setAddress() does all the heavy lifting:
+ // check column and row sanity,
+ // switch controllers for LCD40x4 if needed
+ // switch cursor for LCD40x4 if needed
+ // set the new memory address to show cursor at correct location
+ setAddress(column, row);
+}
+
+
+/** Write a single character (Stream implementation)
+ */
+int TextLCD_Base::_putc(int value) {
+ int addr;
+
+ if (value == '\n') {
+ //No character to write
+
+ //Update Cursor
+ _column = 0;
+ _row++;
+ if (_row >= rows()) {
+ _row = 0;
+ }
+ }
+ else {
+ //Character to write
+ _writeData(value);
+
+ //Update Cursor
+ _column++;
+ if (_column >= columns()) {
+ _column = 0;
+ _row++;
+ if (_row >= rows()) {
+ _row = 0;
+ }
+ }
+ } //else
+
+ //Set next memoryaddress, make sure cursor blinks at next location
+ addr = getAddress(_column, _row);
+ _writeCommand(0x80 | addr);
+
+ return value;
+}
+
+
+// get a single character (Stream implementation)
+int TextLCD_Base::_getc() {
+ return -1;
+}
+
+
+#if(LCD_PRINTF != 1)
+/** Write a character to the LCD
+ *
+ * @param c The character to write to the display
+ */
+int TextLCD_Base::putc(int c){
+ return _putc(c);
+}
+
+
+/** Write a raw string to the LCD
+ *
+ * @param string text, may be followed by variables to emulate formatting the string.
+ * However, printf formatting is NOT supported and variables will be ignored!
+ */
+int TextLCD_Base::printf(const char* text, ...) {
+
+ while (*text !=0) {
+ _putc(*text);
+ text++;
+ }
+ return 0;
+}
+#endif
+
+
+
+// Write a nibble using the 4-bit interface
+void TextLCD_Base::_writeNibble(int value) {
+
+// Enable is Low
+ this->_setEnable(true);
+ this->_setData(value & 0x0F); // Low nibble
+ wait_us(1); // Data setup time
+ this->_setEnable(false);
+ wait_us(1); // Datahold time
+
+// Enable is Low
+}
+
+// Write a byte using the 4-bit interface
+void TextLCD_Base::_writeByte(int value) {
+
+// Enable is Low
+ this->_setEnable(true);
+ this->_setData(value >> 4); // High nibble
+ wait_us(1); // Data setup time
+ this->_setEnable(false);
+ wait_us(1); // Data hold time
+
+ this->_setEnable(true);
+ this->_setData(value >> 0); // Low nibble
+ wait_us(1); // Data setup time
+ this->_setEnable(false);
+ wait_us(1); // Datahold time
+
+// Enable is Low
+}
+
+// Write a command byte to the LCD controller
+void TextLCD_Base::_writeCommand(int command) {
+
+ this->_setRS(false);
+ wait_us(1); // Data setup time for RS
+
+ this->_writeByte(command);
+ wait_us(40); // most instructions take 40us
+}
+
+// Write a data byte to the LCD controller
+void TextLCD_Base::_writeData(int data) {
+
+ this->_setRS(true);
+ wait_us(1); // Data setup time for RS
+
+ this->_writeByte(data);
+ wait_us(40); // data writes take 40us
+}
+
+
+// This replaces the original _address() method.
+// It is confusing since it returns the memoryaddress or-ed with the set memorycommand 0x80.
+// Left it in here for compatibility with older code. New applications should use getAddress() instead.
+int TextLCD_Base::_address(int column, int row) {
+ return 0x80 | getAddress(column, row);
+}
+
+
+// This is new method to return the memory address based on row, column and displaytype.
+//
+/** Return the memoryaddress of screen column and row location
+ *
+ * @param column The horizontal position from the left, indexed from 0
+ * @param row The vertical position from the top, indexed from 0
+ * @return The memoryaddress of screen column and row location
+ *
+ */
+int TextLCD_Base::getAddress(int column, int row) {
+
+ switch (_addr_mode) {
+
+ case LCD_T_A:
+ //Default addressing mode for 1, 2 and 4 rows (except 40x4)
+ //The two available rows are split and stacked on top of eachother. Addressing for 3rd and 4th line continues where lines 1 and 2 were split.
+ //Displays top rows when less than four are used.
+ switch (row) {
+ case 0:
+ return 0x00 + column;
+ case 1:
+ return 0x40 + column;
+ case 2:
+ return 0x00 + _nr_cols + column;
+ case 3:
+ return 0x40 + _nr_cols + column;
+ // Should never get here.
+ default:
+ return 0x00;
+ }
+
+ case LCD_T_B:
+ // LCD8x2B is a special layout of LCD16x1
+ if (row==0)
+ return 0x00 + column;
+ else
+// return _nr_cols + column;
+ return 0x08 + column;
+
+ case LCD_T_C:
+ // LCD16x1C is a special layout of LCD8x2
+ // LCD32x1C is a special layout of LCD16x2
+ // LCD40x1C is a special layout of LCD20x2
+#if(0)
+ if (column < 8)
+ return 0x00 + column;
+ else
+ return 0x40 + (column - 8);
+#else
+ if (column < (_nr_cols >> 1))
+ return 0x00 + column;
+ else
+ return 0x40 + (column - (_nr_cols >> 1));
+#endif
+
+// Not sure about this one, seems wrong.
+// Left in for compatibility with original library
+// case LCD16x2B:
+// return 0x00 + (row * 40) + column;
+
+ case LCD_T_D:
+ //Alternate addressing mode for 3 and 4 row displays (except 40x4). Used by PCF21XX, KS0073, KS0078, SSD1803
+ //The 4 available rows start at a hardcoded address.
+ //Displays top rows when less than four are used.
+ switch (row) {
+ case 0:
+ return 0x00 + column;
+ case 1:
+ return 0x20 + column;
+ case 2:
+ return 0x40 + column;
+ case 3:
+ return 0x60 + column;
+ // Should never get here.
+ default:
+ return 0x00;
+ }
+
+ case LCD_T_D1:
+ //Alternate addressing mode for 3 row displays. Used by PCF21XX, KS0073, KS0078, SSD1803
+ //The 4 available rows start at a hardcoded address.
+ //Skips top row of 4 row display and starts display at row 1
+ switch (row) {
+ case 0:
+ return 0x20 + column;
+ case 1:
+ return 0x40 + column;
+ case 2:
+ return 0x60 + column;
+ // Should never get here.
+ default:
+ return 0x00;
+ }
+
+ case LCD_T_E:
+ // LCD40x4 is a special case since it has 2 controllers.
+ // Each controller is configured as 40x2 (Type A)
+ if (row<2) {
+ // Test to see if we need to switch between controllers
+ if (_ctrl_idx != _LCDCtrl_0) {
+
+ // Second LCD controller Cursor Off
+ _setCursorAndDisplayMode(_currentMode, CurOff_BlkOff);
+
+ // Select primary controller
+ _ctrl_idx = _LCDCtrl_0;
+
+ // Restore cursormode on primary LCD controller
+ _setCursorAndDisplayMode(_currentMode, _currentCursor);
+ }
+
+ return 0x00 + (row * 0x40) + column;
+ }
+ else {
+
+ // Test to see if we need to switch between controllers
+ if (_ctrl_idx != _LCDCtrl_1) {
+ // Primary LCD controller Cursor Off
+ _setCursorAndDisplayMode(_currentMode, CurOff_BlkOff);
+
+ // Select secondary controller
+ _ctrl_idx = _LCDCtrl_1;
+
+ // Restore cursormode on secondary LCD controller
+ _setCursorAndDisplayMode(_currentMode, _currentCursor);
+ }
+
+ return 0x00 + ((row-2) * 0x40) + column;
+ }
+
+ case LCD_T_F:
+ //Alternate addressing mode for 3 row displays.
+ //The first half of 3rd row continues from 1st row, the second half continues from 2nd row.
+ switch (row) {
+ case 0:
+ return 0x00 + column;
+ case 1:
+ return 0x40 + column;
+ case 2:
+ if (column < (_nr_cols >> 1)) // check first or second half of line
+ return (0x00 + _nr_cols + column);
+ else
+ return (0x40 + _nr_cols + (column - (_nr_cols >> 1)));
+ // Should never get here.
+ default:
+ return 0x00;
+ }
+
+ case LCD_T_G:
+ //Alternate addressing mode for 3 row displays. Used by ST7036
+ switch (row) {
+ case 0:
+ return 0x00 + column;
+ case 1:
+ return 0x10 + column;
+ case 2:
+ return 0x20 + column;
+ // Should never get here.
+ default:
+ return 0x00;
+ }
+
+ // Should never get here.
+ default:
+ return 0x00;
+
+ } // switch _addr_mode
+}
+
+
+/** Set the memoryaddress of screen column and row location
+ *
+ * @param column The horizontal position from the left, indexed from 0
+ * @param row The vertical position from the top, indexed from 0
+ */
+void TextLCD_Base::setAddress(int column, int row) {
+
+// Sanity Check column
+ if (column < 0) {
+ _column = 0;
+ }
+ else if (column >= _nr_cols) {
+ _column = _nr_cols - 1;
+ } else _column = column;
+
+// Sanity Check row
+ if (row < 0) {
+ _row = 0;
+ }
+ else if (row >= _nr_rows) {
+ _row = _nr_rows - 1;
+ } else _row = row;
+
+
+// Compute the memory address
+// For LCD40x4: switch controllers if needed
+// switch cursor if needed
+ int addr = getAddress(_column, _row);
+
+ _writeCommand(0x80 | addr);
+}
+
+
+/** Return the number of columns
+ *
+ * @return The number of columns
+ *
+ * Note: some configurations are commented out because they have not yet been tested due to lack of hardware
+ */
+int TextLCD_Base::columns() {
+
+ // Columns encoded in b7..b0
+ //return (_type & 0xFF);
+ return _nr_cols;
+}
+
+/** Return the number of rows
+ *
+ * @return The number of rows
+ *
+ * Note: some configurations are commented out because they have not yet been tested due to lack of hardware
+ */
+int TextLCD_Base::rows() {
+
+ // Rows encoded in b15..b8
+ //return ((_type >> 8) & 0xFF);
+ return _nr_rows;
+}
+
+/** Set the Cursormode
+ *
+ * @param cursorMode The Cursor mode (CurOff_BlkOff, CurOn_BlkOff, CurOff_BlkOn, CurOn_BlkOn)
+ */
+void TextLCD_Base::setCursor(LCDCursor cursorMode) {
+
+ // Save new cursor mode, needed when 2 controllers are in use or when display is switched off/on
+ _currentCursor = cursorMode;
+
+ // Configure only current LCD controller
+ _setCursorAndDisplayMode(_currentMode, _currentCursor);
+}
+
+/** Set the Displaymode
+ *
+ * @param displayMode The Display mode (DispOff, DispOn)
+ */
+void TextLCD_Base::setMode(LCDMode displayMode) {
+
+ // Save new displayMode, needed when 2 controllers are in use or when cursor is changed
+ _currentMode = displayMode;
+
+ // Select and configure second LCD controller when needed
+ if(_type==LCD40x4) {
+ if (_ctrl_idx==_LCDCtrl_0) {
+ // Configure primary LCD controller
+ _setCursorAndDisplayMode(_currentMode, _currentCursor);
+
+ // Select 2nd controller
+ _ctrl_idx=_LCDCtrl_1;
+
+ // Configure secondary LCD controller
+ _setCursorAndDisplayMode(_currentMode, CurOff_BlkOff);
+
+ // Restore current controller
+ _ctrl_idx=_LCDCtrl_0;
+ }
+ else {
+ // Select primary controller
+ _ctrl_idx=_LCDCtrl_0;
+
+ // Configure primary LCD controller
+ _setCursorAndDisplayMode(_currentMode, CurOff_BlkOff);
+
+ // Restore current controller
+ _ctrl_idx=_LCDCtrl_1;
+
+ // Configure secondary LCD controller
+ _setCursorAndDisplayMode(_currentMode, _currentCursor);
+ }
+ }
+ else {
+ // Configure primary LCD controller
+ _setCursorAndDisplayMode(_currentMode, _currentCursor);
+ }
+}
+
+/** Low level method to restore the cursortype and display mode for current controller
+ */
+void TextLCD_Base::_setCursorAndDisplayMode(LCDMode displayMode, LCDCursor cursorType) {
+
+ // Configure current LCD controller
+ switch (_ctrl) {
+ case ST7070:
+ //ST7070 does not support Cursorblink. The P bit selects the font instead !
+ _writeCommand(0x08 | displayMode | (cursorType & 0x02));
+ break;
+ default:
+ _writeCommand(0x08 | displayMode | cursorType);
+ break;
+ } //switch
+}
+
+/** Set the Backlight mode
+ *
+ * @param backlightMode The Backlight mode (LightOff, LightOn)
+ */
+void TextLCD_Base::setBacklight(LCDBacklight backlightMode) {
+
+#if (BACKLIGHT_INV==0)
+ // Positive Backlight control pin logic
+ if (backlightMode == LightOn) {
+ this->_setBL(true);
+ }
+ else {
+ this->_setBL(false);
+ }
+#else
+ // Inverted Backlight control pin logic
+ if (backlightMode == LightOn) {
+ this->_setBL(false);
+ }
+ else {
+ this->_setBL(true);
+ }
+#endif
+}
+
+/** Set User Defined Characters
+ *
+ * @param unsigned char c The Index of the UDC (0..7) for HD44780 or clones and (0..15) for some more advanced controllers
+ * @param char *udc_data The bitpatterns for the UDC (8 bytes of 5 significant bits for bitpattern and 3 bits for blinkmode (advanced types))
+ */
+void TextLCD_Base::setUDC(unsigned char c, char *udc_data) {
+
+ // Select and configure second LCD controller when needed
+ if(_type==LCD40x4) {
+ _LCDCtrl_Idx current_ctrl_idx = _ctrl_idx; // Temp save current controller
+
+ // Select primary controller
+ _ctrl_idx=_LCDCtrl_0;
+
+ // Configure primary LCD controller
+ _setUDC(c, udc_data);
+
+ // Select 2nd controller
+ _ctrl_idx=_LCDCtrl_1;
+
+ // Configure secondary LCD controller
+ _setUDC(c, udc_data);
+
+ // Restore current controller
+ _ctrl_idx=current_ctrl_idx;
+ }
+ else {
+ // Configure primary LCD controller
+ _setUDC(c, udc_data);
+ }
+}
+
+/** Low level method to store user defined characters for current controller
+ *
+ * @param unsigned char c The Index of the UDC (0..7) for HD44780 clones and (0..15) for some more advanced controllers
+ * @param char *udc_data The bitpatterns for the UDC (8 bytes of 5 significant bits for bitpattern and 3 bits for blinkmode (advanced types))
+ */
+void TextLCD_Base::_setUDC(unsigned char c, char *udc_data) {
+
+ switch (_ctrl) {
+ case PCF2103_3V3 : // Some UDCs may be used for Icons
+ case PCF2113_3V3 : // Some UDCs may be used for Icons
+ case PCF2116_3V3 :
+ case PCF2116_5V :
+ case PCF2119_3V3 : // Some UDCs may be used for Icons
+ c = c & 0x0F; // mask down to valid range
+ break;
+
+ default:
+ c = c & 0x07; // mask down to valid range
+ break;
+ } //switch _ctrl
+
+ // Select DD RAM for current LCD controller
+ // This is needed to correctly set Bit 6 of the addresspointer for controllers that support 16 UDCs
+ _writeCommand(0x80 | ((c << 3) & 0x40)) ;
+
+ // Select CG RAM for current LCD controller
+ _writeCommand(0x40 | ((c << 3) & 0x3F)); //Set CG-RAM address, (note that Bit 6 is retained and can not be set by this command !)
+ //8 sequential locations needed per UDC
+ // Store UDC pattern
+ for (int i=0; i<8; i++) {
+ _writeData(*udc_data++);
+ }
+
+ //Select DD RAM again for current LCD controller and restore the addresspointer
+ int addr = getAddress(_column, _row);
+ _writeCommand(0x80 | addr);
+}
+
+/** Set UDC Blink and Icon blink
+ * setUDCBlink method is supported by some compatible devices (eg SSD1803)
+ *
+ * @param blinkMode The Blink mode (BlinkOff, BlinkOn)
+ */
+void TextLCD_Base::setUDCBlink(LCDBlink blinkMode){
+ // Blinking UDCs (and icons) are enabled when a specific controlbit (BE) is set.
+ // The blinking pixels in the UDC and icons can be controlled by setting additional bits in the UDC or icon bitpattern.
+ // UDCs are defined by an 8 byte bitpattern. The P0..P4 form the character pattern.
+ // P7 P6 P5 P4 P3 P2 P1 P0
+ // 0 B1 B0 x 0 1 1 1 0
+ // 1 B1 B0 x 1 0 0 0 1
+ // .............
+ // 7 B1 B0 x 1 0 0 0 1
+ //
+ // Bit 6 and Bit 7 in the pattern will control the blinking mode when Blink is enabled through BE.
+ // B1 B0 Mode
+ // 0 0 No Blinking in this row of the UDC
+ // 0 1 Enabled pixels in P4 will blink
+ // 1 x Enabled pixels in P0..P4 will blink
+ //
+ // Note: the PCF2103 and PCF2113 use UDCs to set Icons
+ // 3 x 8 rows x 5 bits = 120 bits Icons for Normal pattern (UDC 0..2) and
+ // 3 x 8 rows x 5 bits = 120 bits Icons for Blink pattern (UDC 4..6)
+ // Note: the PCF2119 uses UDCs to set Icons
+ // 4 x 8 rows x 5 bits = 160 bits Icons for Normal pattern (UDC 0..3) and
+ // 4 x 8 rows x 5 bits = 160 bits Icons for Blink pattern (UDC 4..7)
+ switch (blinkMode) {
+ case BlinkOn:
+ // Controllers that support UDC/Icon Blink
+ switch (_ctrl) {
+ case KS0073 :
+ case KS0078 :
+ _function_1 |= 0x02; // Enable UDC/Icon Blink
+ _writeCommand(0x20 | _function_1); // Function set 0 0 1 DL N RE(1) BE 0/LP (Ext Regs)
+
+ _writeCommand(0x20 | _function); // Function set 0 0 1 DL N RE(0) DH REV (Std Regs)
+ break; // case KS0073, KS0078 Controller
+
+ case US2066_3V3 :
+ case SSD1803_3V3 :
+ _function_1 |= 0x04; // Enable UDC/Icon Blink
+ _writeCommand(0x20 | _function_1); // Set function, 0 0 1 DL N BE RE(1) REV
+ // Select Ext Instr Set
+
+ _writeCommand(0x20 | _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
+ // Select Std Instr set, Select IS=0
+ break; // case SSD1803, US2066
+
+ case PCF2103_3V3 :
+ case PCF2113_3V3 :
+ case PCF2119_3V3 :
+ // Enable Icon Blink
+ _writeCommand(0x20 | _function | 0x01); // Set function, Select Instr Set = 1
+ _writeCommand(0x08 | 0x02); // ICON Conf 0000 1, IM=0 (Char mode), IB=1 (Icon blink), 0 (Instr. Set 1)
+ _writeCommand(0x20 | _function); // Set function, Select Instr Set = 0
+
+ break;
+
+ default:
+ //Unsupported feature for other controllers
+ break;
+ } //switch _ctrl
+
+ break; // BlinkOn
+
+ case BlinkOff:
+ // Controllers that support UDC Blink
+ switch (_ctrl) {
+ case KS0073 :
+ case KS0078 :
+ _function_1 &= ~0x02; // Disable UDC/Icon Blink
+ _writeCommand(0x20 | _function_1); // Function set 0 0 1 DL N RE(1) BE 0/LP (Ext Regs)
+
+ _writeCommand(0x20 | _function); // Function set 0 0 1 DL N RE(0) DH REV (Std Regs)
+ break; // case KS0073, KS0078 Controller
+
+ case US2066_3V3 :
+ case SSD1803_3V3 :
+ _function_1 &= ~0x04; // Disable UDC/Icon Blink
+ _writeCommand(0x20 | _function_1); // Set function, 0 0 1 DL N BE RE(1) REV
+ // Select Ext Instr Set
+
+ _writeCommand(0x20 | _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
+ // Select Std Instr set, Select IS=0
+ break; // case SSD1803, US2066
+
+ case PCF2103_3V3 :
+ case PCF2113_3V3 :
+ case PCF2119_3V3 :
+ // Disable Icon Blink
+ _writeCommand(0x20 | _function | 0x01); // Set function, Select Instr Set = 1
+ _writeCommand(0x08); // ICON Conf 0000 1, IM=0 (Char mode), IB=1 (Icon blink), 0 (Instr. Set 1)
+ _writeCommand(0x20 | _function); // Set function, Select Instr Set = 0
+
+ break;
+
+ default:
+ //Unsupported feature for other controllers
+ break;
+ } //switch _ctrl
+
+ break; //BlinkOff
+
+ default:
+ break;
+ } // blinkMode
+
+} // setUDCBlink()
+
+
+/** Set Contrast
+ * setContrast method is supported by some compatible devices (eg ST7032i) that have onboard LCD voltage generation
+ * Initial code for ST70XX imported from fork by JH1PJL
+ *
+ * @param unsigned char c contrast data (6 significant bits, valid range 0..63, Value 0 will disable the Vgen)
+ * @return none
+ */
+//@TODO Add support for 40x4 dual controller
+void TextLCD_Base::setContrast(unsigned char c) {
+
+// Function set mode stored during Init. Make sure we dont accidentally switch between 1-line and 2-line mode!
+// Icon/Booster mode stored during Init. Make sure we dont accidentally change this!
+
+ _contrast = c & 0x3F; // Sanity check
+
+ switch (_ctrl) {
+ case PCF2113_3V3 :
+ case PCF2119_3V3 :
+ if (_contrast < 5) _contrast = 0; // See datasheet. Sanity check for PCF2113/PCF2119
+ if (_contrast > 55) _contrast = 55;
+
+ _writeCommand(0x20 | _function | 0x01); // Set function, Select Instruction Set = 1
+ _writeCommand(0x80 | 0x00 | (_contrast & 0x3F)); // VLCD_set (Instr. Set 1) V=0, VA=contrast
+ _writeCommand(0x80 | 0x40 | (_contrast & 0x3F)); // VLCD_set (Instr. Set 1) V=1, VB=contrast
+ _writeCommand(0x20 | _function); // Select Instruction Set = 0
+ break;
+
+ case ST7032_3V3 :
+ case ST7032_5V :
+ case ST7036_3V3 :
+// case ST7036_5V :
+ case SSD1803_3V3 :
+ _writeCommand(0x20 | _function | 0x01); // Select Instruction Set = 1
+ _writeCommand(0x70 | (_contrast & 0x0F)); // Contrast Low bits
+ _writeCommand(0x50 | _icon_power | ((_contrast >> 4) & 0x03)); // Contrast High bits
+ _writeCommand(0x20 | _function); // Select Instruction Set = 0
+ break;
+
+ case US2066_3V3 :
+ _writeCommand(0x20 | _function_1); // Set function, 0 0 1 DL N BE RE(1) REV
+ // Select Extended Instruction Set
+
+ _writeCommand(0x79); // Function Select OLED: 0 1 1 1 1 0 0 1 (Ext Instr Set)
+
+ _writeCommand(0x81); // Set Contrast Control: 1 0 0 0 0 0 0 1 (Ext Instr Set, OLED)
+ _writeCommand((_contrast << 2) | 0x03); // Set Contrast Value: 8 bits. Use 6 bits for compatibility
+
+ _writeCommand(0x78); // Function Disable OLED: 0 1 1 1 1 0 0 0 (Ext Instr Set)
+
+ _writeCommand(0x20 | _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
+ // Select Std Instr set, Select IS=0
+ break;
+
+ //not yet tested on hardware
+ case PT6314 :
+ // Only 2 significant bits
+ // 0x00 = 100%
+ // 0x01 = 75%
+ // 0x02 = 50%
+ // 0x03 = 25%
+ _writeCommand(0x20 | _function | ((~_contrast) >> 4)); // Invert and shift to use 2 MSBs
+ break;
+
+ default:
+ //Unsupported feature for other controllers
+ break;
+ } // end switch
+} // end setContrast()
+
+
+/** Set Power
+ * setPower method is supported by some compatible devices (eg SSD1803) that have power down modes
+ *
+ * @param bool powerOn Power on/off
+ * @return none
+ */
+//@TODO Add support for 40x4 dual controller
+void TextLCD_Base::setPower(bool powerOn) {
+
+ if (powerOn) {
+ // Switch on
+ setMode(DispOn);
+
+ // Controllers that supports specific Power Down mode
+ switch (_ctrl) {
+
+// case PCF2113_3V3 :
+// case PCF2119_3V3 :
+// case ST7032_3V3 :
+//@todo
+// enable Booster Bon
+
+ case WS0010:
+ _writeCommand(0x17); // Char mode, DC/DC on
+ wait_ms(10); // Wait 10ms to ensure powered up
+ break;
+
+ case KS0073:
+ case KS0078:
+ case SSD1803_3V3 :
+// case SSD1803_5V :
+ _writeCommand(0x20 | _function_1); // Select Ext Instr Set
+ _writeCommand(0x02); // Power On
+ _writeCommand(0x20 | _function); // Select Std Instr Set
+ break;
+
+ default:
+ //Unsupported feature for other controllers
+ break;
+ } // end switch
+ }
+ else {
+ // Switch off
+ setMode(DispOff);
+
+ // Controllers that support specific Power Down mode
+ switch (_ctrl) {
+
+// case PCF2113_3V3 :
+// case PCF2119_3V3 :
+// case ST7032_3V3 :
+//@todo
+// disable Booster Bon
+
+ case WS0010:
+ _writeCommand(0x13); // Char mode, DC/DC off
+ break;
+
+ case KS0073:
+ case KS0078:
+ case SSD1803_3V3 :
+// case SSD1803_5V :
+ _writeCommand(0x20 | _function_1); // Select Ext Instr Set
+ _writeCommand(0x03); // Power Down
+ _writeCommand(0x20 | _function); // Select Std Instr Set
+ break;
+
+ default:
+ //Unsupported feature for other controllers
+ break;
+ } // end switch
+ }
+} // end setPower()
+
+
+/** Set Orient
+ * setOrient method is supported by some compatible devices (eg SSD1803, US2066) that have top/bottom view modes
+ *
+ * @param LCDOrient orient Orientation
+ * @return none
+ */
+void TextLCD_Base::setOrient(LCDOrient orient){
+
+ switch (orient) {
+
+ case Top:
+ switch (_ctrl) {
+ case PCF2103_3V3:
+ case PCF2116_3V3:
+ case PCF2116_5V:
+ case PCF2119_3V3:
+ _writeCommand(0x20 | _function | 0x01); // Set function, Select Instr Set = 1
+ _writeCommand(0x05); // Display Conf Set 0000 0, 1, P=0, Q=1 (Instr. Set 1)
+ _writeCommand(0x20 | _function); // Set function, Select Instr Set = 0
+ break;
+
+ case SSD1803_3V3 :
+// case SSD1803_5V :
+ case US2066_3V3 :
+ _writeCommand(0x20 | _function_1); // Set function, 0 0 1 X N BE RE(1) REV
+ // Select Extended Instruction Set
+// _writeCommand(0x06); // Set ext entry mode, 0 0 0 0 0 1 BDC=1 COM1-32, BDS=0 SEG100-1 "Bottom View" (Ext Instr Set)
+ _writeCommand(0x05); // Set ext entry mode, 0 0 0 0 0 1 BDC=0 COM32-1, BDS=1 SEG1-100 "Top View" (Ext Instr Set)
+
+ _writeCommand(0x20 | _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
+ // Select Std Instr set, Select IS=0
+ break;
+
+ case ST7070:
+ _writeCommand(0x20 | _function | 0x04); // Set function, 0 0 1 DL, N, EXT=1, x, x (Select Instr Set = 1)
+
+ _writeCommand(0x40 | 0x00); // COM/SEG directions 0 1 0 0 C1, C2, S1, S2 (Instr Set 1)
+ // C1=1: Com1-8 -> Com8-1; C2=1: Com9-16 -> Com16-9
+ // S1=1: Seg1-40 -> Seg40-1; S2=1: Seg41-80 -> Seg80-41
+ wait_ms(5); // Wait to ensure completion or ST7070 fails to set Top/Bottom after reset..
+
+ _writeCommand(0x20 | _function); // Set function, EXT=0 (Select Instr Set = 0)
+
+ break; // case ST7070 Controller
+
+ default:
+ //Unsupported feature for other controllers
+ break;
+
+ } // end switch _ctrl
+ break; // end Top
+
+ case Bottom:
+ switch (_ctrl) {
+ case PCF2103_3V3:
+ case PCF2116_3V3:
+ case PCF2116_5V:
+ case PCF2119_3V3:
+ _writeCommand(0x20 | _function | 0x01); // Set function, Select Instr Set = 1
+ _writeCommand(0x06); // Display Conf Set 0000 0, 1, P=1, Q=0 (Instr. Set 1)
+ _writeCommand(0x20 | _function); // Set function, Select Instr Set = 0
+ break;
+
+ case SSD1803_3V3 :
+// case SSD1803_5V :
+ case US2066_3V3 :
+ _writeCommand(0x20 | _function_1); // Set function, 0 0 1 X N BE RE(1) REV
+ // Select Extended Instruction Set
+ _writeCommand(0x06); // Set ext entry mode, 0 0 0 0 0 1 BDC=1 COM1-32, BDS=0 SEG100-1 "Bottom View" (Ext Instr Set)
+// _writeCommand(0x05); // Set ext entry mode, 0 0 0 0 0 1 BDC=0 COM32-1, BDS=1 SEG1-100 "Top View" (Ext Instr Set)
+
+ _writeCommand(0x20 | _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
+ // Select Std Instr set, Select IS=0
+ break;
+
+ case ST7070:
+ //Note: this does not result in correct top/bottom view.
+ //The left and right half of each row are reversed and the addressing of both rows is also incorrect:
+ //Top/bottomline when orientation is flipped:
+ // 0x48...0x4F 0x40...0x47
+ // 0x08...0x0F 0x00...0x07
+ _writeCommand(0x20 | _function | 0x04); // Set function, 0 0 1 DL N EXT=1 x x (Select Instr Set = 1)
+
+ _writeCommand(0x40 | 0x0F); // COM/SEG directions 0 1 0 0 C1, C2, S1, S2 (Instr Set 1)
+ // C1=1: Com1-8 -> Com8-1; C2=1: Com9-16 -> Com16-9
+ // S1=1: Seg1-40 -> Seg40-1; S2=1: Seg41-80 -> Seg80-41
+ wait_ms(5); // Wait to ensure completion or ST7070 fails to set Top/Bottom after reset..
+
+ _writeCommand(0x20 | _function); // Set function, EXT=0 (Select Instr Set = 0)
+
+ break; // case ST7070 Controller
+
+ default:
+ //Unsupported feature for other controllers
+ break;
+
+ } // end switch _ctrl
+
+ break; // end Bottom
+ } // end switch orient
+} // end setOrient()
+
+/** Set Big Font
+ * setBigFont method is supported by some compatible devices (eg SSD1803, US2066)
+ *
+ * @param lines The selected Big Font lines (None, TopLine, CenterLine, BottomLine, TopBottomLine)
+ * Double height characters can be shown on lines 1+2, 2+3, 3+4 or 1+2 and 3+4
+ * Valid double height lines depend on the LCDs number of rows.
+ */
+void TextLCD_Base::setBigFont(LCDBigFont lines) {
+
+ switch (lines) {
+ case None:
+ switch (_ctrl) {
+ case SSD1803_3V3 :
+ case US2066_3V3 :
+ _writeCommand(0x20 | _function_1); // Set function, 0 0 1 X N BE RE(1) REV
+ // Select Extended Instruction Set
+ _writeCommand(0x1C); // Double Height, 0 0 0 1 UD2=1, UD1=1, X, DH'=0 (Ext Instr Set)
+ // Default
+ _function = _function & ~0x04; // Set function, 0 0 1 DL N DH=0 RE(0) IS=0 Select Instruction Set 0
+ _writeCommand(0x20 | _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
+ // Select Std Instr set, Select IS=0
+ break; // end US2066
+
+ default:
+ break; // end default
+ } // end switch _ctrl
+ break; // end None
+
+ case TopLine:
+ if (_nr_rows < 2) return; //Sanity check
+
+ switch (_ctrl) {
+ case SSD1803_3V3 :
+ case US2066_3V3 :
+ _writeCommand(0x20 | _function_1); // Set function, 0 0 1 X N BE RE(1) REV
+ // Select Extended Instruction Set
+ _writeCommand(0x1C); // Double Height, 0 0 0 1 UD2=1, UD1=1, X, DH'=0 (Ext Instr Set)
+ // Default
+ _function = _function | 0x04; // Set function, 0 0 1 DL N DH=1 RE(0) IS=0 Select Instruction Set 0
+ _writeCommand(0x20 | _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
+ // Select Std Instr set, Select IS=0
+ break; // end US2066, SSD1803
+
+ default:
+ break; // end default
+ } // end switch _ctrl
+ break; // end TopLine
+
+ case CenterLine:
+ if (_nr_rows != 4) return; //Sanity check
+
+ switch (_ctrl) {
+ case SSD1803_3V3 :
+ case US2066_3V3 :
+ _writeCommand(0x20 | _function_1); // Set function, 0 0 1 X N BE RE(1) REV
+ // Select Extended Instruction Set
+ _writeCommand(0x14); // Double Height, 0 0 0 1 UD2=0, UD1=1, X, DH'=0 (Ext Instr Set)
+ // Default
+ _function = _function | 0x04; // Set function, 0 0 1 DL N DH=1 RE(0) IS=0 Select Instruction Set 0
+ _writeCommand(0x20 | _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
+ // Select Std Instr set, Select IS=0
+ break; // end US2066, SSD1803
+
+ default:
+ break; // end default
+ } // end switch _ctrl
+ break; // end CenterLine
+
+ case BottomLine:
+ if (_nr_rows < 3) return; //Sanity check
+
+ switch (_ctrl) {
+ case SSD1803_3V3 :
+ case US2066_3V3 :
+ _writeCommand(0x20 | _function_1); // Set function, 0 0 1 X N BE RE(1) REV
+ // Select Extended Instruction Set
+ if (_nr_rows == 3) {
+ _writeCommand(0x14); // Double Height, 0 0 0 1 UD2=0, UD1=1, X, DH'=0 (Ext Instr Set)
+ }
+ else {
+ _writeCommand(0x10); // Double Height, 0 0 0 1 UD2=0, UD1=0, X, DH'=0 (Ext Instr Set)
+ }
+ _function = _function | 0x04; // Set function, 0 0 1 DL N DH=1 RE(0) IS=0 Select Instruction Set 0
+ _writeCommand(0x20 | _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
+ // Select Std Instr set, Select IS=0
+ break; // end US2066, SSD1803
+
+ default:
+ break; // end default
+ } // end switch _ctrl
+ break; // end BottomLine
+
+ case TopBottomLine:
+ if (_nr_rows != 4) return; //Sanity check
+
+ switch (_ctrl) {
+ case SSD1803_3V3 :
+ case US2066_3V3 :
+ _writeCommand(0x20 | _function_1); // Set function, 0 0 1 X N BE RE(1) REV
+ // Select Extended Instruction Set
+ _writeCommand(0x18); // Double Height, 0 0 0 1 UD2=1, UD1=0, X, DH'=0 (Ext Instr Set)
+ // Default
+ _function = _function | 0x04; // Set function, 0 0 1 DL N DH=1 RE(0) IS=0 Select Instruction Set 0
+ _writeCommand(0x20 | _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
+ // Select Std Instr set, Select IS=0
+ break; // end US2066, SSD1803
+
+ default:
+ break; // end default
+ } // end switch _ctrl
+ break; // end TopBottomLine
+
+ } // end switch lines
+
+} // end setBigFont()
+
+
+/** Set Icons
+ *
+ * @param unsigned char idx The Index of the icon pattern (0..15) for KS0073 and similar controllers
+ * and Index (0..31) for PCF2103 and similar controllers
+ * @param unsigned char data The bitpattern for the icons (6 lsb for KS0073 bitpattern (5 lsb for KS0078) and 2 msb for blinkmode)
+ * The bitpattern for the PCF2103 icons is 5 lsb (UDC 0..2) and 5 lsb for blinkmode (UDC 4..6)
+ */
+void TextLCD_Base::setIcon(unsigned char idx, unsigned char data) {
+ // Blinking icons are enabled when a specific controlbit (BE) is set.
+ // The blinking pixels in the icons can be controlled by setting additional bits in the icon bitpattern.
+ // Icons are defined by a byte bitpattern. The P0..P5 form the Icon pattern for KS0073, and P0..P4 for KS0078
+ // P7 P6 P5 P4 P3 P2 P1 P0
+ // 0 B1 B0 0 0 1 1 1 0
+ // 1 B1 B0 1 1 0 0 0 1
+ // .............
+ // 15 B1 B0 1 1 0 0 0 1
+ //
+ // Bit 6 and Bit 7 in the pattern will control the blinking mode when Blink is enabled through BE.
+ // B1 B0 Mode
+ // 0 0 No Blinking for this icon row
+ // 0 1 Enabled pixels in P5 will blink
+ // 1 x Enabled pixels in P0..P5 will blink
+ //
+ // Note: the PCF2103 and PCF2113 use UDCs to set Icons
+ // 3 x 8 rows x 5 bits = 120 bits Icons for Normal pattern (UDC 0..2) and
+ // 3 x 8 rows x 5 bits = 120 bits Icons for Blink pattern (UDC 4..6)
+ // Note: the PCF2119 uses UDCs to set Icons
+ // 4 x 8 rows x 5 bits = 160 bits Icons for Normal pattern (UDC 0..3) and
+ // 4 x 8 rows x 5 bits = 160 bits Icons for Blink pattern (UDC 4..7)
+
+ switch (_ctrl) {
+ case KS0073:
+ case KS0078:
+ _writeCommand(0x20 | _function_1); // Set function, 0 0 1 DL N RE(1) BE LP
+ // Select Extended Instruction Set
+ _writeCommand(0x40 | (idx & 0x0F)); // Set Icon Address, mask Address to valid range (Ext Instr Set)
+
+ _writeData(data); // Set Icon pattern (Ext Instr Set)
+
+ _writeCommand(0x20 | _function); // Set function, 0 0 1 DL N RE(0) DH REV Select Instruction Set 0
+ // Select Std Instr set, Select IS=0
+ break; // end KS0073, KS0078
+
+ case ST7032_3V3:
+ case ST7032_5V:
+ _writeCommand(0x20 | _function | 0x01); // Set function, 0 0 1 DL N F 0 IS=1 Select Instr Set = 1
+ _writeCommand(0x40 | (idx & 0x0F)); // Set Icon Address, mask Address to valid range (Instr Set 1)
+
+ _writeData(data & 0x1F); // Set Icon pattern, no blink support (Instr Set 1)
+
+ _writeCommand(0x20 | _function); // Set function, 0 0 1 DL N RE(0) DH REV Select Instruction Set 0
+ // Select Std Instr set, Select IS=0
+ break; // end ST7032
+
+ case ST7036_3V3:
+ case ST7036_5V:
+ _writeCommand(0x20 | _function | 0x01); // Set function, 0 0 1 DL N DH IS2,IS1 = 01 (Select Instr Set = 1)
+ _writeCommand(0x40 | (idx & 0x0F)); // Set Icon Address, mask Address to valid range (Instr Set 1)
+
+ _writeData(data & 0x1F); // Set Icon pattern, no blink support (Instr Set 1)
+
+ _writeCommand(0x20 | _function); // Set function, IS2,IS1 = 00 (Select Instr Set = 0)
+ // Select Std Instr set, Select IS=0
+ break; // end ST7036
+
+ case SSD1803_3V3:
+// case SSD1803_5V:
+ _writeCommand(0x20 | _function | 0x01); // Set function, 0 0 1 DL N DH RE(0) IS
+ // Select Instruction Set 1
+ _writeCommand(0x40 | (idx & 0x0F)); // Set Icon Address, mask Address to valid range (Instr Set = 1)
+ _writeData(data); // Set Icon pattern (Instr Set = 1)
+
+ _writeCommand(0x20 | _function); // Set function, 0 0 1 DL N DH RE(0) IS
+ // Select IS=0
+ break; // end SSD1803
+
+ case PCF2103_3V3:
+ case PCF2113_3V3:
+ case PCF2119_3V3:
+ // Store UDC/Icon pattern for PCF2103 and PCF2113:
+ // 3 x 8 rows x 5 bits = 120 bits for Normal pattern (UDC 0..2) and
+ // 3 x 8 rows x 5 bits = 120 bits for Blink pattern (UDC 4..6)
+ // Store UDC/Icon pattern for PCF2119:
+ // 4 x 8 rows x 5 bits = 160 bits for Normal pattern (UDC 0..3) and
+ // 4 x 8 rows x 5 bits = 160 bits for Blink pattern (UDC 4..7)
+ _writeCommand(0x40 | (idx & 0x3F)); //Set CG-RAM address, 8 sequential locations needed per UDC
+ _writeData(data); // Set Icon pattern (Instr Set = 1)
+ break; // case PCF2103_3V3 Controller
+
+ default:
+ break; // end default
+ } // end switch _ctrl
+
+ //Select DD RAM again for current LCD controller and restore the addresspointer
+ int addr = getAddress(_column, _row);
+ _writeCommand(0x80 | addr);
+
+} // end setIcon()
+
+/** Clear Icons
+ *
+ * @param none
+ * @return none
+ */
+ //@TODO Add support for 40x4 dual controller
+void TextLCD_Base::clrIcon() {
+ // Icons are defined by a byte bitpattern. The P0..P5 form the Icon pattern for KS0073, and P0..P4 for KS0078
+ // P7 P6 P5 P4 P3 P2 P1 P0
+ // 0 B1 B0 0 0 0 0 0 0
+ // 1 B1 B0 0 0 0 0 0 0
+ // .............
+ // 15 B1 B0 0 0 0 0 0 0
+ //
+ // Bit 6 and Bit 7 in the pattern will control the blinking mode when Blink is enabled through BE.
+ // B1 B0 Mode
+ // 0 0 No Blinking for this icon row
+ // 0 1 Enabled pixels in P5 will blink
+ // 1 x Enabled pixels in P0..P5 will blink
+ //
+ // Note: the PCF2103 and PCF2113 use UDCs to set Icons
+ // 3 x 8 rows x 5 bits = 120 bits Icons for Normal pattern (UDC 0..2) and
+ // 3 x 8 rows x 5 bits = 120 bits Icons for Blink pattern (UDC 4..6)
+ // Note: the PCF2119 uses UDCs to set Icons
+ // 4 x 8 rows x 5 bits = 160 bits Icons for Normal pattern (UDC 0..3) and
+ // 4 x 8 rows x 5 bits = 160 bits Icons for Blink pattern (UDC 4..7)
+ int idx;
+
+ switch (_ctrl) {
+ case KS0073:
+ case KS0078:
+ _writeCommand(0x20 | _function_1); // Set function, 0 0 1 DL N RE(1) BE LP
+ // Select Extended Instruction Set
+ for (idx=0; idx<16; idx++) {
+ _writeCommand(0x40 | idx); // Set Icon Address, mask Address to valid range (Ext Instr Set)
+ _writeData(0x00); // Clear Icon pattern (Ext Instr Set)
+ }
+ _writeCommand(0x20 | _function); // Set function, 0 0 1 DL N RE(0) DH REV Select Std Instruction Set
+ // Select Std Instr set
+ break; // end KS0073, KS0078
+
+ case ST7032_3V3:
+ case ST7032_5V:
+ _writeCommand(0x20 | _function | 0x01); // Set function, 0 0 1 DL N F 0 IS=1 Select Instr Set = 1
+
+ for (idx=0; idx<16; idx++) {
+ _writeCommand(0x40 | idx); // Set Icon Address, mask Address to valid range (Instr Set 1)
+ _writeData(0x00); // Clear Icon pattern (Instr Set 1)
+ }
+
+ _writeCommand(0x20 | _function); // Set function, 0 0 1 DL N RE(0) DH REV Select Instruction Set 0
+ // Select Std Instr set, Select IS=0
+ break; // end ST7032
+
+ case ST7036_3V3:
+ case ST7036_5V:
+ _writeCommand(0x20 | _function | 0x01); // Set function, 0 0 1 DL N DH IS2,IS1 = 01 (Select Instr Set = 1)
+
+ for (idx=0; idx<16; idx++) {
+ _writeCommand(0x40 | idx); // Set Icon Address, mask Address to valid range (Instr Set 1)
+ _writeData(0x00); // Clear Icon pattern (Instr Set 1)
+ }
+
+ _writeCommand(0x20 | _function); // Set function, IS2,IS1 = 00 (Select Instr Set = 0)
+ // Select Std Instr set, Select IS=0
+ break; // end ST7036
+
+ case SSD1803_3V3:
+// case SSD1803_5V:
+ _writeCommand(0x20 | _function | 0x01); // Set function, 0 0 1 DL N DH RE(0) IS
+ // Select Instruction Set 1
+ for (idx=0; idx<16; idx++) {
+ _writeCommand(0x40 | idx); // Set Icon Address, mask Address to valid range (Ext Instr Set)
+ _writeData(0x00); // Clear Icon pattern (Ext Instr Set)
+ }
+ _writeCommand(0x20 | _function); // Set function, 0 0 1 DL N DH RE(0) IS
+ // Select IS=0
+ break; // end SSD1803
+
+ case PCF2103_3V3:
+ case PCF2113_3V3:
+ // PCF2103 and PCF2113 use part of the UDC RAM to control Icons
+ // Select CG RAM
+
+ _writeCommand(0x40 | (0 * 8)); //Set CG-RAM address, 8 sequential locations needed per UDC
+ // Store UDC/Icon pattern:
+ // 3 x 8 rows x 5 bits = 120 bits for Normal pattern (UDC 0..2) and
+ for (int i=0; i<(3 * 8); i++) {
+// _writeData(0x1F); // All On
+ _writeData(0x00); // All Off
+ }
+
+ _writeCommand(0x40 | (4 * 8)); //Set CG-RAM address, 8 sequential locations needed per UDC
+ // 3 x 8 rows x 5 bits = 120 bits for Blink pattern (UDC 4..6)
+ for (int i=0; i<(3 * 8); i++) {
+// _writeData(0x1F); // All On
+ _writeData(0x00); // All Off
+ }
+ break; // case PCF2103_3V3 Controller
+
+ case PCF2119_3V3:
+ // PCF2119 uses part of the UDC RAM to control Icons
+ // Select CG RAM
+
+ _writeCommand(0x40 | (0 * 8)); //Set CG-RAM address, 8 sequential locations needed per UDC
+ // Store UDC/Icon pattern:
+ // 4 x 8 rows x 5 bits = 160 bits for Normal pattern (UDC 0..3) and
+ for (int i=0; i<(4 * 8); i++) {
+// _writeData(0x1F); // All On
+ _writeData(0x00); // All Off
+ }
+
+ _writeCommand(0x40 | (4 * 8)); //Set CG-RAM address, 8 sequential locations needed per UDC
+ // 4 x 8 rows x 5 bits = 160 bits for Blink pattern (UDC 4..7)
+ for (int i=0; i<(4 * 8); i++) {
+// _writeData(0x1F); // All On
+ _writeData(0x00); // All Off
+ }
+ break; // case PCF2119_3V3 Controller
+
+ default:
+ break; // end default
+ } // end switch _ctrl
+
+ //Select DD RAM again for current LCD controller and restore the addresspointer
+ int addr = getAddress(_column, _row);
+ _writeCommand(0x80 | addr);
+} //end clrIcon()
+
+
+/** Set Invert
+ * setInvert method is supported by some compatible devices (eg KS0073) to swap between black and white
+ *
+ * @param bool invertOn Invert on/off
+ * @return none
+ */
+//@TODO Add support for 40x4 dual controller
+void TextLCD_Base::setInvert(bool invertOn) {
+
+ if (invertOn) {
+ // Controllers that support Invert
+ switch (_ctrl) {
+ case KS0073:
+ case KS0078:
+ _function = _function | 0x01; // Enable Invert
+ _writeCommand(0x20 | _function); // Activate Invert (Std Instr Set)
+ break;
+ case SSD1803_3V3 :
+// case SSD1803_5V :
+ case US2066_3V3:
+// case USS2066_5V:
+ _function_1 = _function_1 | 0x01; // Enable Invert
+ // Set function, 0 0 1 DL N BE RE(1) REV (SSD1803)
+ // Set function, 0 0 1 X N BE RE(1) REV (US2066)
+ _writeCommand(0x20 | _function_1); // Activate Invert (Ext Instr Set)
+ _writeCommand(0x20 | _function); // Return to Std Instr Set
+ break;
+ default:
+ //Unsupported feature for other controllers
+ break;
+ } // end switch
+ }
+ else {
+ // Controllers that support Invert
+ switch (_ctrl) {
+ case KS0073:
+ case KS0078:
+ _function = _function & ~0x01; // Disable Invert
+ _writeCommand(0x20 | _function); // Disable Invert (Std Instr Set)
+ break;
+ case SSD1803_3V3 :
+// case SSD1803_5V :
+ case US2066_3V3:
+// case USS2066_5V:
+ _function_1 = _function_1 & ~0x01; // Disable Invert
+ // Set function, 0 0 1 DL N BE RE(1) REV (SSD1803)
+ // Set function, 0 0 1 X N BE RE(1) REV (US2066)
+ _writeCommand(0x20 | _function_1); // Activate Invert (Ext Instr Set)
+ _writeCommand(0x20 | _function); // Return to Std Instr Set
+ break;
+
+ default:
+ //Unsupported feature for other controllers
+ break;
+ } // end switch
+ }
+} // end setInvert()
+
+//--------- End TextLCD_Base -----------
+
+
+//--------- Start TextLCD Bus -----------
+
+/* Create a TextLCD interface for using regular mbed pins
+ *
+ * @param rs Instruction/data control line
+ * @param e Enable line (clock)
+ * @param d4-d7 Data lines for using as a 4-bit interface
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param bl Backlight control line (optional, default = NC)
+ * @param e2 Enable2 line (clock for second controller, LCD40x4 only)
+ * @param ctrl LCD controller (default = HD44780)
+ */
+TextLCD::TextLCD(PinName rs, PinName e,
+ PinName d4, PinName d5, PinName d6, PinName d7,
+ LCDType type, PinName bl, PinName e2, LCDCtrl ctrl) :
+ TextLCD_Base(type, ctrl),
+ _rs(rs), _e(e), _d(d4, d5, d6, d7) {
+
+ // The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
+ if (bl != NC) {
+ _bl = new DigitalOut(bl); //Construct new pin
+ _bl->write(0); //Deactivate
+ }
+ else {
+ // No Hardware Backlight pin
+ _bl = NULL; //Construct dummy pin
+ }
+
+ // The hardware Enable2 pin is only needed for LCD40x4. Test and make sure whether it exists or not to prevent illegal access.
+ if (e2 != NC) {
+ _e2 = new DigitalOut(e2); //Construct new pin
+ _e2->write(0); //Deactivate
+ }
+ else {
+ // No Hardware Enable pin
+ _e2 = NULL; //Construct dummy pin
+ }
+
+ _init();
+}
+
+/** Destruct a TextLCD interface for using regular mbed pins
+ *
+ * @param none
+ * @return none
+ */
+TextLCD::~TextLCD() {
+ if (_bl != NULL) {delete _bl;} // BL pin
+ if (_e2 != NULL) {delete _e2;} // E2 pin
+}
+
+/** Set E pin (or E2 pin)
+ * Used for mbed pins, I2C bus expander or SPI shiftregister
+ * Default PinName value for E2 is NC, must be used as pointer to avoid issues with mbed lib and DigitalOut pins
+ * @param value true or false
+ * @return none
+ */
+void TextLCD::_setEnable(bool value) {
+
+ if(_ctrl_idx==_LCDCtrl_0) {
+ if (value) {
+ _e = 1; // Set E bit
+ }
+ else {
+ _e = 0; // Reset E bit
+ }
+ }
+ else {
+ if (value) {
+ if (_e2 != NULL) {_e2->write(1);} //Set E2 bit
+ }
+ else {
+ if (_e2 != NULL) {_e2->write(0);} //Reset E2 bit
+ }
+ }
+}
+
+// Set RS pin
+// Used for mbed pins, I2C bus expander or SPI shiftregister
+void TextLCD::_setRS(bool value) {
+
+ if (value) {
+ _rs = 1; // Set RS bit
+ }
+ else {
+ _rs = 0; // Reset RS bit
+ }
+}
+
+/** Set BL pin
+ * Used for mbed pins, I2C bus expander or SPI shiftregister
+ * Default PinName value is NC, must be used as pointer to avoid issues with mbed lib and DigitalOut pins
+ * @param value true or false
+ * @return none
+ */
+void TextLCD::_setBL(bool value) {
+
+ if (value) {
+ if (_bl != NULL) {_bl->write(1);} //Set BL bit
+ }
+ else {
+ if (_bl != NULL) {_bl->write(0);} //Reset BL bit
+ }
+}
+
+// Place the 4bit data on the databus
+// Used for mbed pins, I2C bus expander or SPI shifregister
+void TextLCD::_setData(int value) {
+ _d = value & 0x0F; // Write Databits
+}
+
+//----------- End TextLCD ---------------
+
+
+//--------- Start TextLCD_I2C -----------
+#if(LCD_I2C == 1) /* I2C Expander PCF8574/MCP23008 */
+/** Create a TextLCD interface using an I2C PC8574 (or PCF8574A) or MCP23008 portexpander
+ *
+ * @param i2c I2C Bus
+ * @param deviceAddress I2C slave address (PCF8574, PCF8574A or MCP23008, default = 0x40)
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param ctrl LCD controller (default = HD44780)
+ */
+TextLCD_I2C::TextLCD_I2C(I2C *i2c, char deviceAddress, LCDType type, LCDCtrl ctrl) :
+ TextLCD_Base(type, ctrl),
+ _i2c(i2c){
+
+ _slaveAddress = deviceAddress & 0xFE;
+
+ // Setup the I2C bus
+ // The max bitrate for PCF8574 is 100kbit, the max bitrate for MCP23008 is 400kbit,
+ _i2c->frequency(100000);
+
+#if (MCP23008==1)
+ // MCP23008 portexpander Init
+ _write_register(IODIR, 0x00); // All outputs
+ _write_register(IPOL, 0x00); // No reverse polarity
+ _write_register(GPINTEN, 0x00); // No interrupt
+ _write_register(DEFVAL, 0x00); // Default value to compare against for interrupts
+ _write_register(INTCON, 0x00); // No interrupt on changes
+ _write_register(IOCON, 0x00); // Interrupt polarity
+ _write_register(GPPU, 0x00); // No Pullup
+ _write_register(INTF, 0x00); //
+ _write_register(INTCAP, 0x00); //
+ _write_register(GPIO, 0x00); // Output/Input pins
+ _write_register(OLAT, 0x00); // Output Latch
+
+ // Init the portexpander bus
+ _lcd_bus = D_LCD_BUS_DEF;
+
+ // write the new data to the portexpander
+ _write_register(GPIO, _lcd_bus);
+#else
+ // PCF8574 of PCF8574A portexpander
+
+ // Init the portexpander bus
+ _lcd_bus = D_LCD_BUS_DEF;
+
+ // write the new data to the portexpander
+ _i2c->write(_slaveAddress, &_lcd_bus, 1);
+#endif
+
+ _init();
+}
+
+// Set E pin (or E2 pin)
+// Used for mbed pins, I2C bus expander or SPI shiftregister
+void TextLCD_I2C::_setEnable(bool value) {
+
+ if(_ctrl_idx==_LCDCtrl_0) {
+ if (value) {
+ _lcd_bus |= D_LCD_E; // Set E bit
+ }
+ else {
+ _lcd_bus &= ~D_LCD_E; // Reset E bit
+ }
+ }
+ else {
+ if (value) {
+ _lcd_bus |= D_LCD_E2; // Set E2 bit
+ }
+ else {
+ _lcd_bus &= ~D_LCD_E2; // Reset E2bit
+ }
+ }
+
+#if (MCP23008==1)
+ // MCP23008 portexpander
+
+ // write the new data to the portexpander
+ _write_register(GPIO, _lcd_bus);
+#else
+ // PCF8574 of PCF8574A portexpander
+
+ // write the new data to the I2C portexpander
+ _i2c->write(_slaveAddress, &_lcd_bus, 1);
+#endif
+}
+
+// Set RS pin
+// Used for mbed pins, I2C bus expander or SPI shiftregister
+void TextLCD_I2C::_setRS(bool value) {
+
+ if (value) {
+ _lcd_bus |= D_LCD_RS; // Set RS bit
+ }
+ else {
+ _lcd_bus &= ~D_LCD_RS; // Reset RS bit
+ }
+
+#if (MCP23008==1)
+ // MCP23008 portexpander
+
+ // write the new data to the portexpander
+ _write_register(GPIO, _lcd_bus);
+#else
+ // PCF8574 of PCF8574A portexpander
+
+ // write the new data to the I2C portexpander
+ _i2c->write(_slaveAddress, &_lcd_bus, 1);
+#endif
+}
+
+// Set BL pin
+// Used for mbed pins, I2C bus expander or SPI shiftregister
+void TextLCD_I2C::_setBL(bool value) {
+
+ if (value) {
+ _lcd_bus |= D_LCD_BL; // Set BL bit
+ }
+ else {
+ _lcd_bus &= ~D_LCD_BL; // Reset BL bit
+ }
+
+#if (MCP23008==1)
+ // MCP23008 portexpander
+
+ // write the new data to the portexpander
+ _write_register(GPIO, _lcd_bus);
+#else
+ // PCF8574 of PCF8574A portexpander
+
+ // write the new data to the I2C portexpander
+ _i2c->write(_slaveAddress, &_lcd_bus, 1);
+#endif
+}
+
+
+// Place the 4bit data on the databus
+// Used for mbed pins, I2C bus expander or SPI shifregister
+void TextLCD_I2C::_setData(int value) {
+ int data;
+
+ // Set bit by bit to support any mapping of expander portpins to LCD pins
+
+ data = value & 0x0F;
+ if (data & 0x01){
+ _lcd_bus |= D_LCD_D4; // Set Databit
+ }
+ else {
+ _lcd_bus &= ~D_LCD_D4; // Reset Databit
+ }
+
+ if (data & 0x02){
+ _lcd_bus |= D_LCD_D5; // Set Databit
+ }
+ else {
+ _lcd_bus &= ~D_LCD_D5; // Reset Databit
+ }
+
+ if (data & 0x04) {
+ _lcd_bus |= D_LCD_D6; // Set Databit
+ }
+ else {
+ _lcd_bus &= ~D_LCD_D6; // Reset Databit
+ }
+
+ if (data & 0x08) {
+ _lcd_bus |= D_LCD_D7; // Set Databit
+ }
+ else {
+ _lcd_bus &= ~D_LCD_D7; // Reset Databit
+ }
+
+#if (MCP23008==1)
+ // MCP23008 portexpander
+
+ // write the new data to the portexpander
+ _write_register(GPIO, _lcd_bus);
+#else
+ // PCF8574 of PCF8574A portexpander
+
+ // write the new data to the I2C portexpander
+ _i2c->write(_slaveAddress, &_lcd_bus, 1);
+#endif
+
+}
+
+// Write data to MCP23008 I2C portexpander
+void TextLCD_I2C::_write_register (int reg, int value) {
+ char data[] = {reg, value};
+
+ _i2c->write(_slaveAddress, data, 2);
+}
+#endif /* I2C Expander PCF8574/MCP23008 */
+//---------- End TextLCD_I2C ------------
+
+
+//--------- Start TextLCD_I2C_N ---------
+#if(LCD_I2C_N == 1) /* Native I2C */
+
+ /** Create a TextLCD interface using a controller with native I2C interface
+ *
+ * @param i2c I2C Bus
+ * @param deviceAddress I2C slave address (default = 0x7C)
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param bl Backlight control line (optional, default = NC)
+ * @param ctrl LCD controller (default = ST7032_3V3)
+ */
+TextLCD_I2C_N::TextLCD_I2C_N(I2C *i2c, char deviceAddress, LCDType type, PinName bl, LCDCtrl ctrl) :
+ TextLCD_Base(type, ctrl),
+
+ _i2c(i2c){
+
+ _slaveAddress = deviceAddress & 0xFE;
+
+ // Setup the I2C bus
+ // The max bitrate for ST7032i is 400kbit, lets stick to default here
+ _i2c->frequency(100000);
+
+
+ // The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
+ if (bl != NC) {
+ _bl = new DigitalOut(bl); //Construct new pin
+ _bl->write(0); //Deactivate
+ }
+ else {
+ // No Hardware Backlight pin
+ _bl = NULL; //Construct dummy pin
+ }
+
+ //Sanity check
+ if (_ctrl & LCD_C_I2C) {
+ _init(_LCD_DL_8); // Set Datalength to 8 bit for all native serial interfaces
+ }
+ else {
+ error("Error: LCD Controller type does not support native I2C interface\n\r");
+ }
+}
+
+TextLCD_I2C_N::~TextLCD_I2C_N() {
+ if (_bl != NULL) {delete _bl;} // BL pin
+}
+
+// Not used in this mode
+void TextLCD_I2C_N::_setEnable(bool value) {
+}
+
+// Set RS pin
+// Used for mbed pins, I2C bus expander or SPI shiftregister and native I2C or SPI
+void TextLCD_I2C_N::_setRS(bool value) {
+// The controlbyte defines the meaning of the next byte. This next byte can either be data or command.
+// Start Slaveaddress+RW b7 b6 b5 b4 b3 b2 b1 b0 b7...........b0 Stop
+// Co RS RW 0 0 0 0 0 command or data
+//
+// C0=1 indicates that another controlbyte will follow after the next data or command byte
+// RS=1 means that next byte is data, RS=0 means that next byte is command
+// RW=0 means write to controller. RW=1 means that controller will be read from after the next command.
+// Many native I2C controllers dont support this option and it is not used by this lib.
+//
+
+ if (value) {
+ _controlbyte = 0x40; // Next byte is data, No more control bytes will follow
+ }
+ else {
+ _controlbyte = 0x00; // Next byte is command, No more control bytes will follow
+ }
+}
+
+// Set BL pin
+void TextLCD_I2C_N::_setBL(bool value) {
+ if (_bl) {
+ _bl->write(value);
+ }
+}
+
+// Not used in this mode
+void TextLCD_I2C_N::_setData(int value) {
+}
+
+// Write a byte using I2C
+void TextLCD_I2C_N::_writeByte(int value) {
+// The controlbyte defines the meaning of the next byte. This next byte can either be data or command.
+// Start Slaveaddress+RW b7 b6 b5 b4 b3 b2 b1 b0 b7...........b0 Stop
+// Co RS RW 0 0 0 0 0 command or data
+//
+// C0=1 indicates that another controlbyte will follow after the next data or command byte
+// RS=1 means that next byte is data, RS=0 means that next byte is command
+// RW=0 means write to controller. RW=1 means that controller will be read from after the next command.
+// Many native I2C controllers dont support this option and it is not used by this lib.
+//
+ char data[] = {_controlbyte, value};
+
+#if(LCD_I2C_ACK==1)
+//Controllers that support ACK
+ _i2c->write(_slaveAddress, data, 2);
+#else
+//Controllers that dont support ACK
+ _i2c->start();
+ _i2c->write(_slaveAddress);
+ _i2c->write(data[0]);
+ _i2c->write(data[1]);
+ _i2c->stop();
+#endif
+}
+#endif /* Native I2C */
+//-------- End TextLCD_I2C_N ------------
+
+
+//--------- Start TextLCD_SPI -----------
+#if(LCD_SPI == 1) /* SPI Expander SN74595 */
+
+ /** Create a TextLCD interface using an SPI 74595 portexpander
+ *
+ * @param spi SPI Bus
+ * @param cs chip select pin (active low)
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param ctrl LCD controller (default = HD44780)
+ */
+TextLCD_SPI::TextLCD_SPI(SPI *spi, PinName cs, LCDType type, LCDCtrl ctrl) :
+ TextLCD_Base(type, ctrl),
+ _spi(spi),
+ _cs(cs) {
+
+ // Init cs
+ _setCS(true);
+
+ // Setup the spi for 8 bit data, low steady state clock,
+ // rising edge capture, with a 500KHz or 1MHz clock rate
+ _spi->format(8,0);
+ _spi->frequency(500000);
+ //_spi.frequency(1000000);
+
+ // Init the portexpander bus
+ _lcd_bus = D_LCD_BUS_DEF;
+
+ // write the new data to the portexpander
+ _setCS(false);
+ _spi->write(_lcd_bus);
+ _setCS(true);
+
+ _init();
+}
+
+// Set E pin (or E2 pin)
+// Used for mbed pins, I2C bus expander or SPI shiftregister
+void TextLCD_SPI::_setEnable(bool value) {
+
+ if(_ctrl_idx==_LCDCtrl_0) {
+ if (value) {
+ _lcd_bus |= D_LCD_E; // Set E bit
+ }
+ else {
+ _lcd_bus &= ~D_LCD_E; // Reset E bit
+ }
+ }
+ else {
+ if (value) {
+ _lcd_bus |= D_LCD_E2; // Set E2 bit
+ }
+ else {
+ _lcd_bus &= ~D_LCD_E2; // Reset E2 bit
+ }
+ }
+
+ // write the new data to the SPI portexpander
+ _setCS(false);
+ _spi->write(_lcd_bus);
+ _setCS(true);
+}
+
+// Set RS pin
+// Used for mbed pins, I2C bus expander or SPI shiftregister and SPI_N
+void TextLCD_SPI::_setRS(bool value) {
+
+ if (value) {
+ _lcd_bus |= D_LCD_RS; // Set RS bit
+ }
+ else {
+ _lcd_bus &= ~D_LCD_RS; // Reset RS bit
+ }
+
+ // write the new data to the SPI portexpander
+ _setCS(false);
+ _spi->write(_lcd_bus);
+ _setCS(true);
+}
+
+// Set BL pin
+// Used for mbed pins, I2C bus expander or SPI shiftregister
+void TextLCD_SPI::_setBL(bool value) {
+
+ if (value) {
+ _lcd_bus |= D_LCD_BL; // Set BL bit
+ }
+ else {
+ _lcd_bus &= ~D_LCD_BL; // Reset BL bit
+ }
+
+ // write the new data to the SPI portexpander
+ _setCS(false);
+ _spi->write(_lcd_bus);
+ _setCS(true);
+}
+
+// Place the 4bit data on the databus
+// Used for mbed pins, I2C bus expander or SPI shiftregister
+void TextLCD_SPI::_setData(int value) {
+ int data;
+
+ // Set bit by bit to support any mapping of expander portpins to LCD pins
+
+ data = value & 0x0F;
+ if (data & 0x01) {
+ _lcd_bus |= D_LCD_D4; // Set Databit
+ }
+ else {
+ _lcd_bus &= ~D_LCD_D4; // Reset Databit
+ }
+
+ if (data & 0x02) {
+ _lcd_bus |= D_LCD_D5; // Set Databit
+ }
+ else {
+ _lcd_bus &= ~D_LCD_D5; // Reset Databit
+ }
+
+ if (data & 0x04) {
+ _lcd_bus |= D_LCD_D6; // Set Databit
+ }
+ else {
+ _lcd_bus &= ~D_LCD_D6; // Reset Databit
+ }
+
+ if (data & 0x08) {
+ _lcd_bus |= D_LCD_D7; // Set Databit
+ }
+ else {
+ _lcd_bus &= ~D_LCD_D7; // Reset Databit
+ }
+
+ // write the new data to the SPI portexpander
+ _setCS(false);
+ _spi->write(_lcd_bus);
+ _setCS(true);
+}
+
+// Set CS line.
+// Only used for SPI bus
+void TextLCD_SPI::_setCS(bool value) {
+
+ if (value) {
+ _cs = 1; // Set CS pin
+ }
+ else {
+ _cs = 0; // Reset CS pin
+ }
+}
+#endif /* SPI Expander SN74595 */
+//---------- End TextLCD_SPI ------------
+
+
+//--------- Start TextLCD_SPI_N ---------
+#if(LCD_SPI_N == 1) /* Native SPI bus */
+ /** Create a TextLCD interface using a controller with a native SPI4 interface
+ *
+ * @param spi SPI Bus
+ * @param cs chip select pin (active low)
+ * @param rs Instruction/data control line
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param bl Backlight control line (optional, default = NC)
+ * @param ctrl LCD controller (default = ST7032_3V3)
+ */
+TextLCD_SPI_N::TextLCD_SPI_N(SPI *spi, PinName cs, PinName rs, LCDType type, PinName bl, LCDCtrl ctrl) :
+ TextLCD_Base(type, ctrl),
+ _spi(spi),
+ _cs(cs),
+ _rs(rs) {
+
+ // Init CS
+ _cs = 1;
+
+ // Setup the spi for 8 bit data, high steady state clock,
+ // rising edge capture, with a 500KHz or 1MHz clock rate
+// _spi->format(8,3);
+// _spi->frequency(1000000);
+
+ // Setup the spi for 8 bit data, low steady state clock,
+ // rising edge capture, with a 500KHz or 1MHz clock rate
+ _spi->format(8,0);
+// _spi->frequency(300000);
+// _spi->frequency(500000);
+ _spi->frequency(1000000);
+
+ // The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
+ if (bl != NC) {
+ _bl = new DigitalOut(bl); //Construct new pin
+ _bl->write(0); //Deactivate
+ }
+ else {
+ // No Hardware Backlight pin
+ _bl = NULL; //Construct dummy pin
+ }
+
+ //Sanity check
+ if (_ctrl & LCD_C_SPI4) {
+ _init(_LCD_DL_8); // Set Datalength to 8 bit for all native serial interfaces
+ // ST7070 must set datalength to 8 bits!
+ }
+ else {
+ error("Error: LCD Controller type does not support native SPI4 interface\n\r");
+ }
+}
+
+TextLCD_SPI_N::~TextLCD_SPI_N() {
+ if (_bl != NULL) {delete _bl;} // BL pin
+}
+
+// Not used in this mode
+void TextLCD_SPI_N::_setEnable(bool value) {
+}
+
+// Set RS pin
+// Used for mbed pins, I2C bus expander or SPI shiftregister, SPI_N
+void TextLCD_SPI_N::_setRS(bool value) {
+ _rs = value;
+}
+
+// Set BL pin
+void TextLCD_SPI_N::_setBL(bool value) {
+ if (_bl) {
+ _bl->write(value);
+ }
+}
+
+// Not used in this mode
+void TextLCD_SPI_N::_setData(int value) {
+}
+
+// Write a byte using SPI
+void TextLCD_SPI_N::_writeByte(int value) {
+ _cs = 0;
+ wait_us(1);
+ _spi->write(value);
+ wait_us(1);
+ _cs = 1;
+}
+#endif /* Native SPI bus */
+//-------- End TextLCD_SPI_N ------------
+
+
+//-------- Start TextLCD_SPI_N_3_8 --------
+#if(LCD_SPI_N_3_8 == 1) /* Native SPI bus */
+
+ /** Create a TextLCD interface using a controller with a native SPI3 8 bits interface
+ * This mode is supported by ST7070. Note that implementation in TexTLCD is not very efficient due to
+ * structure of the TextLCD library: each databyte is written separately and requires a separate 'count command' set to 1 byte.
+ *
+ * @param spi SPI Bus
+ * @param cs chip select pin (active low)
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param bl Backlight control line (optional, default = NC)
+ * @param ctrl LCD controller (default = ST7070)
+ */
+TextLCD_SPI_N_3_8::TextLCD_SPI_N_3_8(SPI *spi, PinName cs, LCDType type, PinName bl, LCDCtrl ctrl) :
+ TextLCD_Base(type, ctrl),
+ _spi(spi),
+ _cs(cs) {
+
+ // Init CS
+ _cs = 1;
+
+ // Setup the spi for 8 bit data, high steady state clock,
+ // rising edge capture, with a 500KHz or 1MHz clock rate
+// _spi->format(8,3);
+// _spi->frequency(300000);
+// _spi->frequency(1000000);
+
+ // Setup the spi for 8 bit data, low steady state clock,
+ // rising edge capture, with a 500KHz or 1MHz clock rate
+ _spi->format(8,0);
+// _spi->frequency(300000);
+// _spi->frequency(500000);
+ _spi->frequency(1000000);
+
+
+ // The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
+ if (bl != NC) {
+ _bl = new DigitalOut(bl); //Construct new pin
+ _bl->write(0); //Deactivate
+ }
+ else {
+ // No Hardware Backlight pin
+ _bl = NULL; //Construct dummy pin
+ }
+
+ //Sanity check
+ if (_ctrl & LCD_C_SPI3_8) {
+ _init(_LCD_DL_8); // Set Datalength to 8 bit for all native serial interfaces
+ }
+ else {
+ error("Error: LCD Controller type does not support native SPI3 8 bits interface\n\r");
+ }
+}
+
+TextLCD_SPI_N_3_8::~TextLCD_SPI_N_3_8() {
+ if (_bl != NULL) {delete _bl;} // BL pin
+}
+
+// Not used in this mode
+void TextLCD_SPI_N_3_8::_setEnable(bool value) {
+}
+
+// Used for mbed pins, I2C bus expander or SPI shiftregister, SPI_N
+// RS=1 means that next byte is data, RS=0 means that next byte is command
+void TextLCD_SPI_N_3_8::_setRS(bool value) {
+
+ if (value) {
+ _controlbyte = 0x01; // Next byte is data, No more control bytes will follow
+ }
+ else {
+ _controlbyte = 0x00; // Next byte is command, No more control bytes will follow
+ }
+}
+
+// Set BL pin
+void TextLCD_SPI_N_3_8::_setBL(bool value) {
+ if (_bl) {
+ _bl->write(value);
+ }
+}
+
+// Not used in this mode
+void TextLCD_SPI_N_3_8::_setData(int value) {
+}
+
+// Write a byte using SPI3 8 bits mode (ST7070)
+void TextLCD_SPI_N_3_8::_writeByte(int value) {
+
+ if (_controlbyte == 0x00) { // Byte is command
+ _cs = 0;
+ wait_us(1);
+ _spi->write(value);
+ wait_us(1);
+ _cs = 1;
+ }
+ else { // Byte is data
+ // Select Extended Instr Set
+ _cs = 0;
+ wait_us(1);
+ _spi->write(0x20 | _function | 0x04); // Set function, 0 0 1 DL N EXT=1 x x (Select Instr Set = 1));
+ wait_us(1);
+ _cs = 1;
+
+ wait_us(40); // Wait until command has finished...
+
+ // Set Count to 1 databyte
+ _cs = 0;
+ wait_us(1);
+ _spi->write(0x80); // Set display data length, 1 L6 L5 L4 L3 L2 L1 L0 (Instr Set = 1)
+ wait_us(1);
+ _cs = 1;
+
+ wait_us(40);
+
+ // Write 1 databyte
+ _cs = 0;
+ wait_us(1);
+ _spi->write(value); // Write data (Instr Set = 1)
+ wait_us(1);
+ _cs = 1;
+
+ wait_us(40);
+
+ // Select Standard Instr Set
+ _cs = 0;
+ wait_us(1);
+ _spi->write(0x20 | _function); // Set function, 0 0 1 DL N EXT=0 x x (Select Instr Set = 0));
+ wait_us(1);
+ _cs = 1;
+ }
+}
+#endif /* Native SPI bus */
+//------- End TextLCD_SPI_N_3_8 -----------
+
+
+//-------- Start TextLCD_SPI_N_3_9 --------
+#if(LCD_SPI_N_3_9 == 1) /* Native SPI bus */
+//Code checked out on logic analyser. Not yet tested on hardware..
+
+ /** Create a TextLCD interface using a controller with a native SPI3 9 bits interface
+ *
+ * @param spi SPI Bus
+ * @param cs chip select pin (active low)
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param bl Backlight control line (optional, default = NC)
+ * @param ctrl LCD controller (default = AIP31068)
+ */
+TextLCD_SPI_N_3_9::TextLCD_SPI_N_3_9(SPI *spi, PinName cs, LCDType type, PinName bl, LCDCtrl ctrl) :
+ TextLCD_Base(type, ctrl),
+ _spi(spi),
+ _cs(cs) {
+
+ // Init CS
+ _cs = 1;
+
+ // Setup the spi for 9 bit data, high steady state clock,
+ // rising edge capture, with a 500KHz or 1MHz clock rate
+ _spi->format(9,3);
+ _spi->frequency(1000000);
+
+ // The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
+ if (bl != NC) {
+ _bl = new DigitalOut(bl); //Construct new pin
+ _bl->write(0); //Deactivate
+ }
+ else {
+ // No Hardware Backlight pin
+ _bl = NULL; //Construct dummy pin
+ }
+
+ //Sanity check
+ if (_ctrl & LCD_C_SPI3_9) {
+ _init(_LCD_DL_8); // Set Datalength to 8 bit for all native serial interfaces
+ }
+ else {
+ error("Error: LCD Controller type does not support native SPI3 9 bits interface\n\r");
+ }
+}
+
+TextLCD_SPI_N_3_9::~TextLCD_SPI_N_3_9() {
+ if (_bl != NULL) {delete _bl;} // BL pin
+}
+
+// Not used in this mode
+void TextLCD_SPI_N_3_9::_setEnable(bool value) {
+}
+
+// Set RS pin
+// Used for mbed pins, I2C bus expander or SPI shiftregister
+void TextLCD_SPI_N_3_9::_setRS(bool value) {
+// The controlbits define the meaning of the next byte. This next byte can either be data or command.
+// b8 b7...........b0
+// RS command or data
+//
+// RS=1 means that next byte is data, RS=0 means that next byte is command
+//
+
+ if (value) {
+ _controlbyte = 0x01; // Next byte is data
+ }
+ else {
+ _controlbyte = 0x00; // Next byte is command
+ }
+}
+
+// Set BL pin
+void TextLCD_SPI_N_3_9::_setBL(bool value) {
+ if (_bl) {
+ _bl->write(value);
+ }
+}
+
+// Not used in this mode
+void TextLCD_SPI_N_3_9::_setData(int value) {
+}
+
+// Write a byte using SPI3 9 bits mode
+void TextLCD_SPI_N_3_9::_writeByte(int value) {
+ _cs = 0;
+ wait_us(1);
+ _spi->write( (_controlbyte << 8) | (value & 0xFF));
+ wait_us(1);
+ _cs = 1;
+}
+#endif /* Native SPI bus */
+//------- End TextLCD_SPI_N_3_9 -----------
+
+
+//------- Start TextLCD_SPI_N_3_10 --------
+#if(LCD_SPI_N_3_10 == 1) /* Native SPI bus */
+
+ /** Create a TextLCD interface using a controller with a native SPI3 10 bits interface
+ *
+ * @param spi SPI Bus
+ * @param cs chip select pin (active low)
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param bl Backlight control line (optional, default = NC)
+ * @param ctrl LCD controller (default = AIP31068)
+ */
+TextLCD_SPI_N_3_10::TextLCD_SPI_N_3_10(SPI *spi, PinName cs, LCDType type, PinName bl, LCDCtrl ctrl) :
+ TextLCD_Base(type, ctrl),
+ _spi(spi),
+ _cs(cs) {
+
+ // Init CS
+ _cs = 1;
+
+ // Setup the spi for 10 bit data, low steady state clock,
+ // rising edge capture, with a 500KHz or 1MHz clock rate
+ _spi->format(10,0);
+ _spi->frequency(1000000);
+
+ // The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
+ if (bl != NC) {
+ _bl = new DigitalOut(bl); //Construct new pin
+ _bl->write(0); //Deactivate
+ }
+ else {
+ // No Hardware Backlight pin
+ _bl = NULL; //Construct dummy pin
+ }
+
+ //Sanity check
+ if (_ctrl & LCD_C_SPI3_10) {
+ _init(_LCD_DL_8); // Set Datalength to 8 bit for all native serial interfaces
+ }
+ else {
+ error("Error: LCD Controller type does not support native SPI3 10 bits interface\n\r");
+ }
+}
+
+TextLCD_SPI_N_3_10::~TextLCD_SPI_N_3_10() {
+ if (_bl != NULL) {delete _bl;} // BL pin
+}
+
+// Not used in this mode
+void TextLCD_SPI_N_3_10::_setEnable(bool value) {
+}
+
+// Set RS pin
+// Used for mbed pins, I2C bus expander or SPI shiftregister
+void TextLCD_SPI_N_3_10::_setRS(bool value) {
+// The controlbits define the meaning of the next byte. This next byte can either be data or command.
+// b9 b8 b7...........b0
+// RS RW command or data
+//
+// RS=1 means that next byte is data, RS=0 means that next byte is command
+// RW=0 means that next byte is writen, RW=1 means that next byte is read (not used in this lib)
+//
+
+ if (value) {
+ _controlbyte = 0x02; // Next byte is data
+ }
+ else {
+ _controlbyte = 0x00; // Next byte is command
+ }
+}
+
+// Set BL pin
+void TextLCD_SPI_N_3_10::_setBL(bool value) {
+ if (_bl) {
+ _bl->write(value);
+ }
+}
+
+// Not used in this mode
+void TextLCD_SPI_N_3_10::_setData(int value) {
+}
+
+// Write a byte using SPI3 10 bits mode
+void TextLCD_SPI_N_3_10::_writeByte(int value) {
+ _cs = 0;
+ wait_us(1);
+ _spi->write( (_controlbyte << 8) | (value & 0xFF));
+ wait_us(1);
+ _cs = 1;
+}
+#endif /* Native SPI bus */
+//------- End TextLCD_SPI_N_3_10 ----------
+
+
+//------- Start TextLCD_SPI_N_3_16 --------
+#if(LCD_SPI_N_3_16 == 1) /* Native SPI bus */
+
+ /** Create a TextLCD interface using a controller with a native SPI3 16 bits interface
+ *
+ * @param spi SPI Bus
+ * @param cs chip select pin (active low)
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param bl Backlight control line (optional, default = NC)
+ * @param ctrl LCD controller (default = PT6314)
+ */
+TextLCD_SPI_N_3_16::TextLCD_SPI_N_3_16(SPI *spi, PinName cs, LCDType type, PinName bl, LCDCtrl ctrl) :
+ TextLCD_Base(type, ctrl),
+ _spi(spi),
+ _cs(cs) {
+
+ // Init CS
+ _cs = 1;
+
+ // Setup the spi for 8 bit data, low steady state clock,
+ // rising edge capture, with a 500KHz or 1MHz clock rate
+ _spi->format(8,0);
+ _spi->frequency(1000000);
+
+ // The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
+ if (bl != NC) {
+ _bl = new DigitalOut(bl); //Construct new pin
+ _bl->write(0); //Deactivate
+ }
+ else {
+ // No Hardware Backlight pin
+ _bl = NULL; //Construct dummy pin
+ }
+
+ //Sanity check
+ if (_ctrl & LCD_C_SPI3_16) {
+ _init(_LCD_DL_8); // Set Datalength to 8 bit for all native serial interfaces
+ }
+ else {
+ error("Error: LCD Controller type does not support native SPI3 16 bits interface\n\r");
+ }
+}
+
+TextLCD_SPI_N_3_16::~TextLCD_SPI_N_3_16() {
+ if (_bl != NULL) {delete _bl;} // BL pin
+}
+
+// Not used in this mode
+void TextLCD_SPI_N_3_16::_setEnable(bool value) {
+}
+
+// Set RS pin
+// Used for mbed pins, I2C bus expander or SPI shiftregister
+void TextLCD_SPI_N_3_16::_setRS(bool value) {
+// The 16bit mode is split in 2 bytes. The first byte is for synchronisation and controlbits. The controlbits define the meaning of the next byte.
+// The 8 actual bits represent either a data or a command byte.
+// b15 b14 b13 b12 b11 b10 b9 b8 - b7 b6 b5 b4 b3 b2 b1 b0
+// 1 1 1 1 1 RW RS 0 d7 d6 d5 d4 d3 d2 d1 d0
+//
+// RS=1 means that next byte is data, RS=0 means that next byte is command
+// RW=0 means that next byte is writen, RW=1 means that next byte is read (not used in this lib)
+//
+
+ if (value) {
+ _controlbyte = 0xFA; // Next byte is data
+ }
+ else {
+ _controlbyte = 0xF8; // Next byte is command
+ }
+}
+
+// Set BL pin
+void TextLCD_SPI_N_3_16::_setBL(bool value) {
+ if (_bl) {
+ _bl->write(value);
+ }
+}
+
+// Not used in this mode
+void TextLCD_SPI_N_3_16::_setData(int value) {
+}
+
+// Write a byte using SPI3 16 bits mode
+void TextLCD_SPI_N_3_16::_writeByte(int value) {
+ _cs = 0;
+ wait_us(1);
+
+ _spi->write(_controlbyte);
+
+ _spi->write(value);
+
+ wait_us(1);
+ _cs = 1;
+}
+#endif /* Native SPI bus */
+//------- End TextLCD_SPI_N_3_16 ----------
+
+
+//------- Start TextLCD_SPI_N_3_24 --------
+#if(LCD_SPI_N_3_24 == 1) /* Native SPI bus */
+
+ /** Create a TextLCD interface using a controller with a native SPI3 24 bits interface
+ *
+ * @param spi SPI Bus
+ * @param cs chip select pin (active low)
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param bl Backlight control line (optional, default = NC)
+ * @param ctrl LCD controller (default = SSD1803)
+ */
+TextLCD_SPI_N_3_24::TextLCD_SPI_N_3_24(SPI *spi, PinName cs, LCDType type, PinName bl, LCDCtrl ctrl) :
+ TextLCD_Base(type, ctrl),
+ _spi(spi),
+ _cs(cs) {
+
+ // Init CS
+ _cs = 1;
+
+ // Setup the spi for 8 bit data, high steady state clock,
+ // rising edge capture, with a 500KHz or 1MHz clock rate
+ _spi->format(8,3);
+ _spi->frequency(1000000);
+
+ // The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
+ if (bl != NC) {
+ _bl = new DigitalOut(bl); //Construct new pin
+ _bl->write(0); //Deactivate
+ }
+ else {
+ // No Hardware Backlight pin
+ _bl = NULL; //Construct dummy pin
+ }
+
+ //Sanity check
+ if (_ctrl & LCD_C_SPI3_24) {
+ _init(_LCD_DL_8); // Set Datalength to 8 bit for all native serial interfaces
+ }
+ else {
+ error("Error: LCD Controller type does not support native SPI3 24 bits interface\n\r");
+ }
+}
+
+TextLCD_SPI_N_3_24::~TextLCD_SPI_N_3_24() {
+ if (_bl != NULL) {delete _bl;} // BL pin
+}
+
+// Not used in this mode
+void TextLCD_SPI_N_3_24::_setEnable(bool value) {
+}
+
+// Set RS pin
+// Used for mbed pins, I2C bus expander or SPI shiftregister
+void TextLCD_SPI_N_3_24::_setRS(bool value) {
+// The 24bit mode is split in 3 bytes. The first byte is for synchronisation and controlbits. The controlbits define the meaning of the next two bytes.
+// Each byte encodes 4 actual bits. The 8 actual bits represent either a data or a command byte.
+// b23 b22 b21 b20 b19 b18 b17 b16 - b15 b14 b13 b12 b11 b10 b9 b8 - b7 b6 b5 b4 b3 b2 b1 b0
+// 1 1 1 1 1 RW RS 0 d0 d1 d2 d3 0 0 0 0 d4 d5 d6 d7 0 0 0 0
+//
+// RS=1 means that next byte is data, RS=0 means that next byte is command
+// RW=0 means that next byte is writen, RW=1 means that next byte is read (not used in this lib)
+//
+// Note: SPI3_24 expects LSB first. This is inconsistent with regular SPI convention (and hardware) that sends MSB first.
+
+ if (value) {
+ _controlbyte = 0xFA; // Next byte is data
+ }
+ else {
+ _controlbyte = 0xF8; // Next byte is command
+ }
+}
+
+// Set BL pin
+void TextLCD_SPI_N_3_24::_setBL(bool value) {
+ if (_bl) {
+ _bl->write(value);
+ }
+}
+
+// Not used in this mode
+void TextLCD_SPI_N_3_24::_setData(int value) {
+}
+
+//Mapping table to flip the bits around cause SPI3_24 expects LSB first.
+const uint8_t map3_24[16] = {0x00, 0x80, 0x40, 0xC0, 0x20, 0xA0, 0x60, 0xE0, 0x10, 0x90, 0x50, 0xD0, 0x30, 0xB0, 0x70, 0xF0};
+
+// Write a byte using SPI3 24 bits mode
+void TextLCD_SPI_N_3_24::_writeByte(int value) {
+ _cs = 0;
+ wait_us(1);
+ _spi->write(_controlbyte);
+
+ //Map and send the LSB nibble
+ _spi->write( map3_24[value & 0x0F]);
+
+ //Map and send the MSB nibble
+ _spi->write( map3_24[(value >> 4) & 0x0F]);
+
+ wait_us(1);
+ _cs = 1;
+}
+#endif /* Native SPI bus */
+//------- End TextLCD_SPI_N_3_24 ----------
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TextLCD/TextLCD.h Fri Feb 07 08:37:50 2020 +0000
@@ -0,0 +1,1167 @@
+/* mbed TextLCD Library, for a 4-bit LCD based on HD44780
+ * Copyright (c) 2007-2010, sford, http://mbed.org
+ * 2013, v01: WH, Added LCD types, fixed LCD address issues, added Cursor and UDCs
+ * 2013, v02: WH, Added I2C and SPI bus interfaces
+ * 2013, v03: WH, Added support for LCD40x4 which uses 2 controllers
+ * 2013, v04: WH, Added support for Display On/Off, improved 4bit bootprocess
+ * 2013, v05: WH, Added support for 8x2B, added some UDCs
+ * 2013, v06: WH, Added support for devices that use internal DC/DC converters
+ * 2013, v07: WH, Added support for backlight and include portdefinitions for LCD2004 Module from DFROBOT
+ * 2014, v08: WH, Refactored in Base and Derived Classes to deal with mbed lib change regarding 'NC' defined DigitalOut pins
+ * 2014, v09: WH/EO, Added Class for Native SPI controllers such as ST7032
+ * 2014, v10: WH, Added Class for Native I2C controllers such as ST7032i, Added support for MCP23008 I2C portexpander, Added support for Adafruit module
+ * 2014, v11: WH, Added support for native I2C controllers such as PCF21XX, Improved the _initCtrl() method to deal with differences between all supported controllers
+ * 2014, v12: WH, Added support for native I2C controller PCF2119 and native I2C/SPI controllers SSD1803, ST7036, added setContrast method (by JH1PJL) for supported devices (eg ST7032i)
+ * 2014, v13: WH, Added support for controllers US2066/SSD1311 (OLED), added setUDCBlink() method for supported devices (eg SSD1803), fixed issue in setPower()
+ * 2014, v14: WH, Added support for PT6314 (VFD), added setOrient() method for supported devices (eg SSD1803, US2066), added Double Height lines for supported devices,
+ * added 16 UDCs for supported devices (eg PCF2103), moved UDC defines to TextLCD_UDC file, added TextLCD_Config.h for feature and footprint settings.
+ * 2014, v15: WH, Added AC780 support, added I2C expander modules, fixed setBacklight() for inverted logic modules. Fixed bug in LCD_SPI_N define
+ * 2014, v16: WH, Added ST7070 and KS0073 support, added setIcon(), clrIcon() and setInvert() method for supported devices
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef MBED_TEXTLCD_H
+#define MBED_TEXTLCD_H
+
+#include "mbed.h"
+#include "TextLCD_Config.h"
+#include "TextLCD_UDC.h"
+
+/** A TextLCD interface for driving 4-bit HD44780-based LCDs
+ *
+ * Currently supports 8x1, 8x2, 12x3, 12x4, 16x1, 16x2, 16x3, 16x4, 20x2, 20x4, 24x1, 24x2, 24x4, 40x2 and 40x4 panels.
+ * Interface options include direct mbed pins, I2C portexpander (PCF8474/PCF8574A or MCP23008) or SPI bus shiftregister (74595).
+ * Supports some controllers with native I2C or SPI interface. Supports some controllers that provide internal DC/DC converters for VLCD or VLED.
+ * Supports some controllers that feature programmable contrast control, powerdown, blinking UDCs and/or top/down orientation modes.
+ *
+ * @code
+ * #include "mbed.h"
+ * #include "TextLCD.h"
+ *
+ * // I2C Communication
+ * I2C i2c_lcd(p28,p27); // SDA, SCL
+ *
+ * // SPI Communication
+ * SPI spi_lcd(p5, NC, p7); // MOSI, MISO, SCLK
+ *
+ * //TextLCD lcd(p15, p16, p17, p18, p19, p20); // RS, E, D4-D7, LCDType=LCD16x2, BL=NC, E2=NC, LCDTCtrl=HD44780
+ * //TextLCD_SPI lcd(&spi_lcd, p8, TextLCD::LCD40x4); // SPI bus, 74595 expander, CS pin, LCD Type
+ * TextLCD_I2C lcd(&i2c_lcd, 0x42, TextLCD::LCD20x4); // I2C bus, PCF8574 Slaveaddress, LCD Type
+ * //TextLCD_I2C lcd(&i2c_lcd, 0x42, TextLCD::LCD16x2, TextLCD::WS0010); // I2C bus, PCF8574 Slaveaddress, LCD Type, Device Type (OLED)
+ * //TextLCD_SPI_N lcd(&spi_lcd, p8, p9); // SPI bus, CS pin, RS pin, LCDType=LCD16x2, BL=NC, LCDTCtrl=ST7032_3V3
+ * //TextLCD_I2C_N lcd(&i2c_lcd, ST7032_SA, TextLCD::LCD16x2, NC, TextLCD::ST7032_3V3); // I2C bus, Slaveaddress, LCD Type, BL=NC, LCDTCtrl=ST7032_3V3
+ * //TextLCD_SPI_N_3_24 lcd(&spi_lcd, p8, TextLCD::LCD20x4D, NC, TextLCD::SSD1803_3V3); // SPI bus, CS pin, LCDType=LCD20x4D, BL=NC, LCDTCtrl=SSD1803
+ * //TextLCD_SPI_N_3_24 lcd(&spi_lcd, p8, TextLCD::LCD20x2, NC, TextLCD::US2066_3V3); // SPI bus, CS pin, LCDType=LCD20x2, BL=NC, LCDTCtrl=US2066 (OLED)
+ *
+ * int main() {
+ * lcd.printf("Hello World!\n");
+ * }
+ * @endcode
+ */
+
+//The TextLCD_Config.h file selects hardware interface options to reduce memory footprint
+//and provides Pin Defines for I2C PCF8574/PCF8574A or MCP23008 and SPI 74595 bus expander interfaces.
+//The LCD and serial portexpanders should be wired accordingly.
+
+/* LCD Type information on Rows, Columns and Variant. This information is encoded in
+ * an int and used for the LCDType enumerators in order to simplify code maintenance */
+// Columns encoded in b7..b0
+#define LCD_T_COL_MSK 0x000000FF
+#define LCD_T_C6 0x00000006
+#define LCD_T_C8 0x00000008
+#define LCD_T_C10 0x0000000A
+#define LCD_T_C12 0x0000000C
+#define LCD_T_C16 0x00000010
+#define LCD_T_C20 0x00000014
+#define LCD_T_C24 0x00000018
+#define LCD_T_C32 0x00000020
+#define LCD_T_C40 0x00000028
+
+// Rows encoded in b15..b8
+#define LCD_T_ROW_MSK 0x0000FF00
+#define LCD_T_R1 0x00000100
+#define LCD_T_R2 0x00000200
+#define LCD_T_R3 0x00000300
+#define LCD_T_R4 0x00000400
+
+// Addressing mode encoded in b19..b16
+#define LCD_T_ADR_MSK 0x000F0000
+#define LCD_T_A 0x00000000 /*Mode A Default 1, 2 or 4 line display */
+#define LCD_T_B 0x00010000 /*Mode B, Alternate 8x2 (actually 16x1 display) */
+#define LCD_T_C 0x00020000 /*Mode C, Alternate 16x1 (actually 8x2 display) */
+#define LCD_T_D 0x00030000 /*Mode D, Alternate 3 or 4 line display (12x4, 20x4, 24x4) */
+#define LCD_T_D1 0x00040000 /*Mode D1, Alternate 3 out of 4 line display (12x3, 20x3, 24x3) */
+#define LCD_T_E 0x00050000 /*Mode E, 40x4 display (actually two 40x2) */
+#define LCD_T_F 0x00060000 /*Mode F, 16x3 display (actually 24x2) */
+#define LCD_T_G 0x00070000 /*Mode G, 16x3 display */
+
+/* LCD Ctrl information on interface support and features. This information is encoded in
+ * an int and used for the LCDCtrl enumerators in order to simplify code maintenance */
+// Interface encoded in b31..b24
+#define LCD_C_BUS_MSK 0xFF000000
+#define LCD_C_PAR 0x01000000 /*Parallel 4 or 8 bit data, E pin, RS pin, RW=GND */
+#define LCD_C_SPI3_8 0x02000000 /*SPI 3 line (MOSI, SCL, CS pins), 8 bits (Count Command initiates Data transfer) */
+#define LCD_C_SPI3_9 0x04000000 /*SPI 3 line (MOSI, SCL, CS pins), 9 bits (RS + 8 Data) */
+#define LCD_C_SPI3_10 0x08000000 /*SPI 3 line (MOSI, SCL, CS pins), 10 bits (RS, RW + 8 Data) */
+#define LCD_C_SPI3_16 0x10000000 /*SPI 3 line (MOSI, SCL, CS pins), 16 bits (RS, RW + 8 Data) */
+#define LCD_C_SPI3_24 0x20000000 /*SPI 3 line (MOSI, SCL, CS pins), 24 bits (RS, RW + 8 Data) */
+#define LCD_C_SPI4 0x40000000 /*SPI 4 line (MOSI, SCL, CS, RS pin), RS pin + 8 Data */
+#define LCD_C_I2C 0x80000000 /*I2C (SDA, SCL pin), 8 control bits (Co, RS, RW) + 8 Data */
+// Features encoded in b23..b16
+#define LCD_C_FTR_MSK 0x00FF0000
+#define LCD_C_BST 0x00010000 /*Booster */
+#define LCD_C_CTR 0x00020000 /*Contrast Control */
+#define LCD_C_ICN 0x00040000 /*Icons */
+#define LCD_C_PDN 0x00080000 /*Power Down */
+
+/** A TextLCD interface for driving 4-bit HD44780-based LCDs
+ *
+ * @brief Currently supports 8x1, 8x2, 12x2, 12x3, 12x4, 16x1, 16x2, 16x3, 16x4, 20x2, 20x4, 24x2, 24x4, 40x2 and 40x4 panels
+ * Interface options include direct mbed pins, I2C portexpander (PCF8474/PCF8574A or MCP23008) or SPI bus shiftregister (74595) and some native I2C or SPI devices
+ *
+ */
+class TextLCD_Base : public Stream {
+//class TextLCD_Base{
+
+//Unfortunately this #define selection breaks Doxygen !!!
+//#if (LCD_PRINTF == 1)
+//class TextLCD_Base : public Stream {
+//#else
+//class TextLCD_Base{
+//#endif
+
+public:
+
+ /** LCD panel format */
+ // The commented out types exist but have not yet been tested with the library
+ enum LCDType {
+// LCD6x1 = (LCD_T_A | LCD_T_C6 | LCD_T_R1), /**< 6x1 LCD panel */
+// LCD6x2 = (LCD_T_A | LCD_T_C6 | LCD_T_R2), /**< 6x2 LCD panel */
+ LCD8x1 = (LCD_T_A | LCD_T_C8 | LCD_T_R1), /**< 8x1 LCD panel */
+ LCD8x2 = (LCD_T_A | LCD_T_C8 | LCD_T_R2), /**< 8x2 LCD panel */
+ LCD8x2B = (LCD_T_D | LCD_T_C8 | LCD_T_R2), /**< 8x2 LCD panel (actually 16x1) */
+ LCD12x1 = (LCD_T_A | LCD_T_C12 | LCD_T_R1), /**< 12x1 LCD panel */
+ LCD12x2 = (LCD_T_A | LCD_T_C12 | LCD_T_R2), /**< 12x2 LCD panel */
+ LCD12x3D = (LCD_T_D | LCD_T_C12 | LCD_T_R3), /**< 12x3 LCD panel, special mode PCF21XX, KS0073 */
+ LCD12x3D1 = (LCD_T_D1 | LCD_T_C12 | LCD_T_R3), /**< 12x3 LCD panel, special mode PCF21XX, KS0073 */
+// LCD12x3G = (LCD_T_G | LCD_T_C12 | LCD_T_R3), /**< 12x3 LCD panel, special mode ST7036 */
+ LCD12x4 = (LCD_T_A | LCD_T_C12 | LCD_T_R4), /**< 12x4 LCD panel */
+ LCD12x4D = (LCD_T_B | LCD_T_C12 | LCD_T_R4), /**< 12x4 LCD panel, special mode PCF21XX, KS0073 */
+ LCD16x1 = (LCD_T_A | LCD_T_C16 | LCD_T_R1), /**< 16x1 LCD panel */
+ LCD16x1C = (LCD_T_C | LCD_T_C16 | LCD_T_R1), /**< 16x1 LCD panel (actually 8x2) */
+ LCD16x2 = (LCD_T_A | LCD_T_C16 | LCD_T_R2), /**< 16x2 LCD panel (default) */
+// LCD16x2B = (LCD_T_B | LCD_T_C16 | LCD_T_R2), /**< 16x2 LCD panel, alternate addressing, wrong.. */
+ LCD16x3D = (LCD_T_D | LCD_T_C16 | LCD_T_R3), /**< 16x3 LCD panel, special mode SSD1803 */
+// LCD16x3D1 = (LCD_T_D1 | LCD_T_C16 | LCD_T_R3), /**< 16x3 LCD panel, special mode SSD1803 */
+ LCD16x3F = (LCD_T_F | LCD_T_C16 | LCD_T_R3), /**< 16x3 LCD panel (actually 24x2) */
+ LCD16x3G = (LCD_T_G | LCD_T_C16 | LCD_T_R3), /**< 16x3 LCD panel, special mode ST7036 */
+ LCD16x4 = (LCD_T_A | LCD_T_C16 | LCD_T_R4), /**< 16x4 LCD panel */
+// LCD16x4D = (LCD_T_D | LCD_T_C16 | LCD_T_R4), /**< 16x4 LCD panel, special mode SSD1803 */
+ LCD20x1 = (LCD_T_A | LCD_T_C20 | LCD_T_R1), /**< 20x1 LCD panel */
+ LCD20x2 = (LCD_T_A | LCD_T_C20 | LCD_T_R2), /**< 20x2 LCD panel */
+// LCD20x3 = (LCD_T_A | LCD_T_C20 | LCD_T_R3), /**< 20x3 LCD panel */
+// LCD20x3D = (LCD_T_D | LCD_T_C20 | LCD_T_R3), /**< 20x3 LCD panel, special mode SSD1803 */
+// LCD20x3D1 = (LCD_T_D1 | LCD_T_C20 | LCD_T_R3), /**< 20x3 LCD panel, special mode SSD1803 */
+ LCD20x4 = (LCD_T_A | LCD_T_C20 | LCD_T_R4), /**< 20x4 LCD panel */
+ LCD20x4D = (LCD_T_D | LCD_T_C20 | LCD_T_R4), /**< 20x4 LCD panel, special mode SSD1803 */
+ LCD24x1 = (LCD_T_A | LCD_T_C24 | LCD_T_R1), /**< 24x1 LCD panel */
+ LCD24x2 = (LCD_T_A | LCD_T_C24 | LCD_T_R2), /**< 24x2 LCD panel */
+// LCD24x3D = (LCD_T_D | LCD_T_C24 | LCD_T_R3), /**< 24x3 LCD panel */
+// LCD24x3D1 = (LCD_T_D | LCD_T_C24 | LCD_T_R3), /**< 24x3 LCD panel */
+ LCD24x4D = (LCD_T_D | LCD_T_C24 | LCD_T_R4), /**< 24x4 LCD panel, special mode KS0078 */
+// LCD32x1 = (LCD_T_A | LCD_T_C32 | LCD_T_R1), /**< 32x1 LCD panel */
+// LCD32x1C = (LCD_T_C | LCD_T_C32 | LCD_T_R1), /**< 32x1 LCD panel (actually 16x2) */
+// LCD32x2 = (LCD_T_A | LCD_T_C32 | LCD_T_R2), /**< 32x2 LCD panel */
+// LCD32x4 = (LCD_T_A | LCD_T_C32 | LCD_T_R4), /**< 32x4 LCD panel */
+// LCD40x1 = (LCD_T_A | LCD_T_C40 | LCD_T_R1), /**< 40x1 LCD panel */
+// LCD40x1C = (LCD_T_C | LCD_T_C40 | LCD_T_R1), /**< 40x1 LCD panel (actually 20x2) */
+ LCD40x2 = (LCD_T_A | LCD_T_C40 | LCD_T_R2), /**< 40x2 LCD panel */
+ LCD40x4 = (LCD_T_E | LCD_T_C40 | LCD_T_R4) /**< 40x4 LCD panel, Two controller version */
+ };
+
+
+ /** LCD Controller Device */
+ enum LCDCtrl {
+ HD44780 = 0 | LCD_C_PAR, /**< HD44780 or full equivalent (default) */
+ WS0010 = 1 | (LCD_C_PAR | LCD_C_SPI3_10 | LCD_C_PDN), /**< WS0010/RS0010 OLED Controller, 4/8 bit, SPI3 */
+ ST7036_3V3 = 2 | (LCD_C_PAR | LCD_C_SPI4 | LCD_C_I2C | LCD_C_BST | LCD_C_CTR), /**< ST7036 3V3 with Booster, 4/8 bit, SPI4, I2C */
+ ST7036_5V = 3 | (LCD_C_PAR | LCD_C_SPI4 | LCD_C_I2C | LCD_C_BST | LCD_C_CTR), /**< ST7036 5V no Booster, 4/8 bit, SPI4, I2C */
+ ST7032_3V3 = 4 | (LCD_C_PAR | LCD_C_SPI4 | LCD_C_I2C | LCD_C_BST | LCD_C_CTR), /**< ST7032 3V3 with Booster, 4/8 bit, SPI4, I2C */
+ ST7032_5V = 5 | (LCD_C_PAR | LCD_C_SPI4 | LCD_C_I2C | LCD_C_CTR), /**< ST7032 5V no Booster, 4/8 bit, SPI4, I2C */
+ KS0078 = 6 | (LCD_C_PAR | LCD_C_SPI3_24 | LCD_C_PDN), /**< KS0078 24x4 support, 4/8 bit, SPI3 */
+ PCF2103_3V3 = 7 | (LCD_C_PAR | LCD_C_I2C), /**< PCF2103 3V3 no Booster, 4/8 bit, I2C */
+ PCF2113_3V3 = 8 | (LCD_C_PAR | LCD_C_I2C | LCD_C_BST | LCD_C_CTR), /**< PCF2113 3V3 with Booster, 4/8 bit, I2C */
+ PCF2116_3V3 = 9 | (LCD_C_PAR | LCD_C_I2C | LCD_C_BST), /**< PCF2116 3V3 with Booster, 4/8 bit, I2C */
+ PCF2116_5V = 10 | (LCD_C_PAR | LCD_C_I2C), /**< PCF2116 5V no Booster, 4/8 bit, I2C */
+ PCF2119_3V3 = 11 | (LCD_C_PAR | LCD_C_I2C | LCD_C_BST | LCD_C_CTR), /**< PCF2119 3V3 with Booster, 4/8 bit, I2C */
+// PCF2119_5V = 12 | (LCD_C_PAR | LCD_C_I2C), /**< PCF2119 5V no Booster, 4/8 bit, I2C */
+ AIP31068 = 13 | (LCD_C_SPI3_9 | LCD_C_I2C | LCD_C_BST), /**< AIP31068 I2C, SPI3 */
+ SSD1803_3V3 = 14 | (LCD_C_PAR | LCD_C_SPI3_24 | LCD_C_I2C | LCD_C_BST | LCD_C_CTR | LCD_C_PDN), /**< SSD1803 3V3 with Booster, 4/8 bit, I2C, SPI3 */
+// SSD1803_5V = 15 | (LCD_C_PAR | LCD_C_SPI3_24 | LCD_C_I2C | LCD_C_BST | LCD_C_CTR | LCD_C_PDN), /**< SSD1803 3V3 with Booster, 4/8 bit, I2C, SPI3 */
+ US2066_3V3 = 16 | (LCD_C_PAR | LCD_C_SPI3_24 | LCD_C_I2C | LCD_C_CTR | LCD_C_PDN), /**< US2066/SSD1311 3V3, 4/8 bit, I2C, SPI3 */
+ PT6314 = 17 | (LCD_C_PAR | LCD_C_SPI3_16 | LCD_C_CTR), /**< PT6314 VFD, 4/8 bit, SPI3 */
+ AC780 = 18 | (LCD_C_PAR | LCD_C_SPI4 | LCD_C_I2C | LCD_C_PDN), /**< AC780/KS0066i 4/8 bit, SPI, I2C */
+// WS0012 = 19 | (LCD_C_PAR | LCD_C_SPI3_10 | LCD_C_I2C | LCD_C_PDN), /**< WS0012 4/8 bit, SPI, I2C */
+ ST7070 = 20 | (LCD_C_PAR | LCD_C_SPI3_8 | LCD_C_SPI4), /**< ST7070 4/8 bit, SPI3 */
+ KS0073 = 21 | (LCD_C_PAR | LCD_C_SPI3_24 | LCD_C_PDN) /**< KS0073 4/8 bit, SPI3 */
+ };
+
+
+ /** LCD Cursor control */
+ enum LCDCursor {
+ CurOff_BlkOff = 0x00, /**< Cursor Off, Blinking Char Off */
+ CurOn_BlkOff = 0x02, /**< Cursor On, Blinking Char Off */
+ CurOff_BlkOn = 0x01, /**< Cursor Off, Blinking Char On */
+ CurOn_BlkOn = 0x03 /**< Cursor On, Blinking Char On */
+ };
+
+ /** LCD Display control */
+ enum LCDMode {
+ DispOff = 0x00, /**< Display Off */
+ DispOn = 0x04 /**< Display On */
+ };
+
+ /** LCD Backlight control */
+ enum LCDBacklight {
+ LightOff, /**< Backlight Off */
+ LightOn /**< Backlight On */
+ };
+
+ /** LCD Blink control (UDC), supported for some Controllers */
+ enum LCDBlink {
+ BlinkOff, /**< Blink Off */
+ BlinkOn /**< Blink On */
+ };
+
+ /** LCD Orientation control, supported for some Controllers */
+ enum LCDOrient {
+ Top, /**< Top view */
+ Bottom /**< Upside down view */
+ };
+
+ /** LCD BigFont control, supported for some Controllers */
+ enum LCDBigFont {
+ None, /**< no lines */
+ TopLine, /**< 1+2 line */
+ CenterLine, /**< 2+3 line */
+ BottomLine, /**< 2+3 line or 3+4 line */
+ TopBottomLine /**< 1+2 line and 3+4 line */
+ };
+
+
+#if(LCD_PRINTF != 1)
+ /** Write a character to the LCD
+ *
+ * @param c The character to write to the display
+ */
+ int putc(int c);
+
+ /** Write a raw string to the LCD
+ *
+ * @param string text, may be followed by variables to emulate formatting the string.
+ * However, printf formatting is NOT supported and variables will be ignored!
+ */
+ int printf(const char* text, ...);
+#else
+#if DOXYGEN_ONLY
+ /** Write a character to the LCD
+ *
+ * @param c The character to write to the display
+ */
+ int putc(int c);
+
+ /** Write a formatted string to the LCD
+ *
+ * @param format A printf-style format string, followed by the
+ * variables to use in formatting the string.
+ */
+ int printf(const char* format, ...);
+#endif
+
+#endif
+
+ /** Locate cursor to a screen column and row
+ *
+ * @param column The horizontal position from the left, indexed from 0
+ * @param row The vertical position from the top, indexed from 0
+ */
+ void locate(int column, int row);
+
+ /** Return the memoryaddress of screen column and row location
+ *
+ * @param column The horizontal position from the left, indexed from 0
+ * @param row The vertical position from the top, indexed from 0
+ * @return The memoryaddress of screen column and row location
+ */
+ int getAddress(int column, int row);
+
+ /** Set the memoryaddress of screen column and row location
+ *
+ * @param column The horizontal position from the left, indexed from 0
+ * @param row The vertical position from the top, indexed from 0
+ */
+ void setAddress(int column, int row);
+
+ /** Clear the screen and locate to 0,0
+ */
+ void cls();
+
+ /** Return the number of rows
+ *
+ * @return The number of rows
+ */
+ int rows();
+
+ /** Return the number of columns
+ *
+ * @return The number of columns
+ */
+ int columns();
+
+ /** Set the Cursormode
+ *
+ * @param cursorMode The Cursor mode (CurOff_BlkOff, CurOn_BlkOff, CurOff_BlkOn, CurOn_BlkOn)
+ */
+ void setCursor(LCDCursor cursorMode);
+
+ /** Set the Displaymode
+ *
+ * @param displayMode The Display mode (DispOff, DispOn)
+ */
+ void setMode(LCDMode displayMode);
+
+ /** Set the Backlight mode
+ *
+ * @param backlightMode The Backlight mode (LightOff, LightOn)
+ */
+ void setBacklight(LCDBacklight backlightMode);
+
+ /** Set User Defined Characters (UDC)
+ *
+ * @param unsigned char c The Index of the UDC (0..7) for HD44780 clones and (0..15) for some more advanced controllers
+ * @param char *udc_data The bitpatterns for the UDC (8 bytes of 5 significant bits for bitpattern and 3 bits for blinkmode (advanced types))
+ */
+ void setUDC(unsigned char c, char *udc_data);
+
+ /** Set UDC Blink and Icon blink
+ * setUDCBlink method is supported by some compatible devices (eg SSD1803)
+ *
+ * @param blinkMode The Blink mode (BlinkOff, BlinkOn)
+ */
+ void setUDCBlink(LCDBlink blinkMode);
+
+ /** Set Contrast
+ * setContrast method is supported by some compatible devices (eg ST7032i) that have onboard LCD voltage generation
+ * Code imported from fork by JH1PJL
+ *
+ * @param unsigned char c contrast data (6 significant bits, valid range 0..63, Value 0 will disable the Vgen)
+ * @return none
+ */
+ void setContrast(unsigned char c = LCD_DEF_CONTRAST);
+
+ /** Set Power
+ * setPower method is supported by some compatible devices (eg SSD1803) that have power down modes
+ *
+ * @param bool powerOn Power on/off
+ * @return none
+ */
+ void setPower(bool powerOn = true);
+
+ /** Set Orient
+ * setOrient method is supported by some compatible devices (eg SSD1803, US2066) that have top/bottom view modes
+ *
+ * @param LCDOrient orient Orientation
+ * @return none
+ */
+ void setOrient(LCDOrient orient = Top);
+
+ /** Set Big Font
+ * setBigFont method is supported by some compatible devices (eg SSD1803, US2066)
+ *
+ * @param lines The selected Big Font lines (None, TopLine, CenterLine, BottomLine, TopBottomLine)
+ * Double height characters can be shown on lines 1+2, 2+3, 3+4 or 1+2 and 3+4
+ * Valid double height lines depend on the LCDs number of rows.
+ */
+ void setBigFont(LCDBigFont lines);
+
+ /** Set Icons
+ *
+ * @param unsigned char idx The Index of the icon pattern (0..15) for KS0073 and similar controllers
+ * and Index (0..31) for PCF2103 and similar controllers
+ * @param unsigned char data The bitpattern for the icons (6 lsb for KS0073 bitpattern (5 lsb for KS0078) and 2 msb for blinkmode)
+ * The bitpattern for the PCF2103 icons is 5 lsb (UDC 0..2) and 5 lsb for blinkmode (UDC 4..6)
+ */
+ void setIcon(unsigned char idx, unsigned char data);
+
+ /** Clear Icons
+ *
+ * @param none
+ * @return none
+ */
+ //@TODO Add support for 40x4 dual controller
+ void clrIcon();
+
+ /** Set Invert
+ * setInvert method is supported by some compatible devices (eg KS0073) to swap between black and white
+ *
+ * @param bool invertOn Invert on/off
+ * @return none
+ */
+ //@TODO Add support for 40x4 dual controller
+ void setInvert(bool invertOn);
+
+protected:
+
+ /** LCD controller select, mainly used for LCD40x4
+ */
+ enum _LCDCtrl_Idx {
+ _LCDCtrl_0, /*< Primary */
+ _LCDCtrl_1, /*< Secondary */
+ };
+
+ /** LCD Datalength control to select between 4 or 8 bit data/commands, used for native Serial interface */
+ enum _LCDDatalength {
+ _LCD_DL_4 = 0x00, /**< Datalength 4 bit */
+ _LCD_DL_8 = 0x10 /**< Datalength 8 bit */
+ };
+
+ /** Create a TextLCD_Base interface
+ * @brief Base class, can not be instantiated
+ *
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param ctrl LCD controller (default = HD44780)
+ */
+ TextLCD_Base(LCDType type = LCD16x2, LCDCtrl ctrl = HD44780);
+
+ // Stream implementation functions
+ virtual int _putc(int value);
+ virtual int _getc();
+
+/** Medium level initialisation method for LCD controller
+ * @param _LCDDatalength dl sets the datalength of data/commands
+ * @return none
+ */
+ void _init(_LCDDatalength dl = _LCD_DL_4);
+
+/** Low level initialisation method for LCD controller
+ * Set number of lines, fonttype, no cursor etc
+ * The controller is accessed in 4-bit parallel mode either directly via mbed pins or through I2C or SPI expander.
+ * Some controllers also support native I2C or SPI interfaces.
+ *
+ * @param _LCDDatalength dl sets the 4 or 8 bit datalength of data/commands. Required for some native serial modes.
+ * @return none
+ */
+ void _initCtrl(_LCDDatalength dl = _LCD_DL_4);
+
+/** Low level character address set method
+ */
+ int _address(int column, int row);
+
+/** Low level cursor enable or disable method
+ */
+ void _setCursor(LCDCursor show);
+
+/** Low level method to store user defined characters for current controller
+ *
+ * @param unsigned char c The Index of the UDC (0..7) for HD44780 clones and (0..15) for some more advanced controllers
+ * @param char *udc_data The bitpatterns for the UDC (8 bytes of 5 significant bits)
+ */
+ void _setUDC(unsigned char c, char *udc_data);
+
+/** Low level method to restore the cursortype and display mode for current controller
+ */
+ void _setCursorAndDisplayMode(LCDMode displayMode, LCDCursor cursorType);
+
+/** Low level nibble write operation to LCD controller (serial or parallel)
+ */
+ void _writeNibble(int value);
+
+/** Low level command byte write operation to LCD controller.
+ * Methods resets the RS bit and provides the required timing for the command.
+ */
+ void _writeCommand(int command);
+
+/** Low level data byte write operation to LCD controller (serial or parallel).
+ * Methods sets the RS bit and provides the required timing for the data.
+ */
+ void _writeData(int data);
+
+/** Pure Virtual Low level writes to LCD Bus (serial or parallel)
+ * Set the Enable pin.
+ */
+ virtual void _setEnable(bool value) = 0;
+
+/** Pure Virtual Low level writes to LCD Bus (serial or parallel)
+ * Set the RS pin ( 0 = Command, 1 = Data).
+ */
+ virtual void _setRS(bool value) = 0;
+
+/** Pure Virtual Low level writes to LCD Bus (serial or parallel)
+ * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
+ */
+ virtual void _setBL(bool value) = 0;
+
+/** Pure Virtual Low level writes to LCD Bus (serial or parallel)
+ * Set the databus value (4 bit).
+ */
+ virtual void _setData(int value) = 0;
+
+/** Low level byte write operation to LCD controller (serial or parallel)
+ * Depending on the RS pin this byte will be interpreted as data or command
+ */
+ virtual void _writeByte(int value);
+
+//Display type
+ LCDType _type;
+ int _nr_cols;
+ int _nr_rows;
+ int _addr_mode;
+
+//Display mode
+ LCDMode _currentMode;
+
+//Controller type
+ LCDCtrl _ctrl;
+
+//Controller select, mainly used for LCD40x4
+ _LCDCtrl_Idx _ctrl_idx;
+
+// Cursor
+ int _column;
+ int _row;
+ LCDCursor _currentCursor;
+
+// Function modes saved to allow switch between Instruction sets after initialisation time
+ int _function, _function_1, _function_x;
+
+// Icon, Booster mode and contrast saved to allow contrast change at later time
+// Only available for controllers with added features
+ int _icon_power, _contrast;
+};
+
+//--------- End TextLCD_Base -----------
+
+
+//--------- Start TextLCD Bus -----------
+
+/** Create a TextLCD interface for using regular mbed pins
+ *
+ */
+class TextLCD : public TextLCD_Base {
+public:
+ /** Create a TextLCD interface for using regular mbed pins
+ *
+ * @param rs Instruction/data control line
+ * @param e Enable line (clock)
+ * @param d4-d7 Data lines for using as a 4-bit interface
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param bl Backlight control line (optional, default = NC)
+ * @param e2 Enable2 line (clock for second controller, LCD40x4 only)
+ * @param ctrl LCD controller (default = HD44780)
+ */
+ TextLCD(PinName rs, PinName e, PinName d4, PinName d5, PinName d6, PinName d7, LCDType type = LCD16x2, PinName bl = NC, PinName e2 = NC, LCDCtrl ctrl = HD44780);
+
+ /** Destruct a TextLCD interface for using regular mbed pins
+ *
+ * @param none
+ * @return none
+ */
+ virtual ~TextLCD();
+
+private:
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (parallel)
+ * Set the Enable pin.
+ */
+ virtual void _setEnable(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (parallel)
+ * Set the RS pin (0 = Command, 1 = Data).
+ */
+ virtual void _setRS(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (parallel)
+ * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
+ */
+ virtual void _setBL(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (parallel)
+ * Set the databus value (4 bit).
+ */
+ virtual void _setData(int value);
+
+
+/** Regular mbed pins bus
+ */
+ DigitalOut _rs, _e;
+ BusOut _d;
+
+/** Optional Hardware pins for the Backlight and LCD40x4 device
+ * Default PinName value is NC, must be used as pointer to avoid issues with mbed lib and DigitalOut pins
+ */
+ DigitalOut *_bl, *_e2;
+};
+
+//----------- End TextLCD ---------------
+
+
+//--------- Start TextLCD_I2C -----------
+#if(LCD_I2C == 1) /* I2C Expander PCF8574/MCP23008 */
+
+/** Create a TextLCD interface using an I2C PCF8574 (or PCF8574A) or MCP23008 portexpander
+ *
+ */
+class TextLCD_I2C : public TextLCD_Base {
+public:
+ /** Create a TextLCD interface using an I2C PCF8574 (or PCF8574A) or MCP23008 portexpander
+ *
+ * @param i2c I2C Bus
+ * @param deviceAddress I2C slave address (PCF8574 or PCF8574A, default = PCF8574_SA0 = 0x40)
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param ctrl LCD controller (default = HD44780)
+ */
+ TextLCD_I2C(I2C *i2c, char deviceAddress = PCF8574_SA0, LCDType type = LCD16x2, LCDCtrl ctrl = HD44780);
+
+private:
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
+ * Set the Enable pin.
+ */
+ virtual void _setEnable(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
+ * Set the RS pin (0 = Command, 1 = Data).
+ */
+ virtual void _setRS(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
+ * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
+ */
+ virtual void _setBL(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
+ * Set the databus value (4 bit).
+ */
+ virtual void _setData(int value);
+
+/** Write data to MCP23008 I2C portexpander
+ * @param reg register to write
+ * @param value data to write
+ * @return none
+ *
+ */
+ void _write_register (int reg, int value);
+
+//I2C bus
+ I2C *_i2c;
+ char _slaveAddress;
+
+// Internal bus mirror value for serial bus only
+ char _lcd_bus;
+};
+#endif /* I2C Expander PCF8574/MCP23008 */
+
+//---------- End TextLCD_I2C ------------
+
+
+//--------- Start TextLCD_SPI -----------
+#if(LCD_SPI == 1) /* SPI Expander SN74595 */
+
+/** Create a TextLCD interface using an SPI 74595 portexpander
+ *
+ */
+class TextLCD_SPI : public TextLCD_Base {
+public:
+ /** Create a TextLCD interface using an SPI 74595 portexpander
+ *
+ * @param spi SPI Bus
+ * @param cs chip select pin (active low)
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param ctrl LCD controller (default = HD44780)
+ */
+ TextLCD_SPI(SPI *spi, PinName cs, LCDType type = LCD16x2, LCDCtrl ctrl = HD44780);
+
+private:
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
+ * Set the Enable pin.
+ */
+ virtual void _setEnable(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
+ * Set the RS pin (0 = Command, 1 = Data).
+ */
+ virtual void _setRS(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
+ * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
+ */
+ virtual void _setBL(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
+ * Set the databus value (4 bit).
+ */
+ virtual void _setData(int value);
+
+/** Implementation of Low level writes to LCD Bus (serial expander)
+ * Set the CS pin (0 = select, 1 = deselect).
+ */
+ virtual void _setCS(bool value);
+
+///** Low level writes to LCD serial bus only (serial expander)
+// */
+// void _writeBus();
+
+// SPI bus
+ SPI *_spi;
+ DigitalOut _cs;
+
+// Internal bus mirror value for serial bus only
+ char _lcd_bus;
+};
+#endif /* SPI Expander SN74595 */
+//---------- End TextLCD_SPI ------------
+
+
+//--------- Start TextLCD_SPI_N -----------
+#if(LCD_SPI_N == 1) /* Native SPI bus */
+
+/** Create a TextLCD interface using a controller with native SPI4 interface
+ *
+ */
+class TextLCD_SPI_N : public TextLCD_Base {
+public:
+ /** Create a TextLCD interface using a controller with native SPI4 interface
+ *
+ * @param spi SPI Bus
+ * @param cs chip select pin (active low)
+ * @param rs Instruction/data control line
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param bl Backlight control line (optional, default = NC)
+ * @param ctrl LCD controller (default = ST7032_3V3)
+ */
+ TextLCD_SPI_N(SPI *spi, PinName cs, PinName rs, LCDType type = LCD16x2, PinName bl = NC, LCDCtrl ctrl = ST7032_3V3);
+ virtual ~TextLCD_SPI_N(void);
+
+private:
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the Enable pin.
+ */
+ virtual void _setEnable(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the RS pin (0 = Command, 1 = Data).
+ */
+ virtual void _setRS(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
+ */
+ virtual void _setBL(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the databus value (4 bit).
+ */
+ virtual void _setData(int value);
+
+/** Low level writes to LCD serial bus only (serial native)
+ */
+ virtual void _writeByte(int value);
+
+// SPI bus
+ SPI *_spi;
+ DigitalOut _cs;
+ DigitalOut _rs;
+
+//Backlight
+ DigitalOut *_bl;
+};
+#endif /* Native SPI bus */
+//---------- End TextLCD_SPI_N ------------
+
+
+//-------- Start TextLCD_SPI_N_3_8 --------
+#if(LCD_SPI_N_3_8 == 1) /* Native SPI bus */
+
+class TextLCD_SPI_N_3_8 : public TextLCD_Base {
+public:
+ /** Create a TextLCD interface using a controller with a native SPI3 8 bits interface
+ * This mode is supported by ST7070. Note that implementation in TexTLCD is not very efficient due to
+ * structure of the TextLCD library: each databyte is written separately and requires a separate 'count command' set to 1 byte.
+ *
+ * @param spi SPI Bus
+ * @param cs chip select pin (active low)
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param bl Backlight control line (optional, default = NC)
+ * @param ctrl LCD controller (default = ST7070)
+ */
+ TextLCD_SPI_N_3_8(SPI *spi, PinName cs, LCDType type = LCD16x2, PinName bl = NC, LCDCtrl ctrl = ST7070);
+
+ virtual ~TextLCD_SPI_N_3_8(void);
+
+private:
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the Enable pin.
+ */
+ virtual void _setEnable(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the RS pin (0 = Command, 1 = Data).
+ */
+ virtual void _setRS(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
+ */
+ virtual void _setBL(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the databus value (4 bit).
+ */
+ virtual void _setData(int value);
+
+/** Low level writes to LCD serial bus only (serial native)
+ */
+ virtual void _writeByte(int value);
+
+// SPI bus
+ SPI *_spi;
+ DigitalOut _cs;
+
+// controlbyte to select between data and command. Internal value for serial bus only
+ char _controlbyte;
+
+//Backlight
+ DigitalOut *_bl;
+};
+
+#endif /* Native SPI bus */
+//------- End TextLCD_SPI_N_3_8 -----------
+
+
+
+//------- Start TextLCD_SPI_N_3_9 ---------
+#if(LCD_SPI_N_3_9 == 1) /* Native SPI bus */
+//Code checked out on logic analyser. Not yet tested on hardware..
+
+/** Create a TextLCD interface using a controller with native SPI3 9 bits interface
+ * Note: current mbed libs only support SPI 9 bit mode for NXP platforms
+ *
+ */
+class TextLCD_SPI_N_3_9 : public TextLCD_Base {
+public:
+ /** Create a TextLCD interface using a controller with native SPI3 9 bits interface
+ * Note: current mbed libs only support SPI 9 bit mode for NXP platforms
+ *
+ * @param spi SPI Bus
+ * @param cs chip select pin (active low)
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param bl Backlight control line (optional, default = NC)
+ * @param ctrl LCD controller (default = AIP31068)
+ */
+ TextLCD_SPI_N_3_9(SPI *spi, PinName cs, LCDType type = LCD16x2, PinName bl = NC, LCDCtrl ctrl = AIP31068);
+ virtual ~TextLCD_SPI_N_3_9(void);
+
+private:
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the Enable pin.
+ */
+ virtual void _setEnable(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the RS pin (0 = Command, 1 = Data).
+ */
+ virtual void _setRS(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
+ */
+ virtual void _setBL(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the databus value (4 bit).
+ */
+ virtual void _setData(int value);
+
+/** Low level writes to LCD serial bus only (serial native)
+ */
+ virtual void _writeByte(int value);
+
+// SPI bus
+ SPI *_spi;
+ DigitalOut _cs;
+
+// controlbyte to select between data and command. Internal value for serial bus only
+ char _controlbyte;
+
+//Backlight
+ DigitalOut *_bl;
+};
+#endif /* Native SPI bus */
+//-------- End TextLCD_SPI_N_3_9 ----------
+
+
+//------- Start TextLCD_SPI_N_3_10 ---------
+#if(LCD_SPI_N_3_10 == 1) /* Native SPI bus */
+
+/** Create a TextLCD interface using a controller with native SPI3 10 bits interface
+ * Note: current mbed libs only support SPI 10 bit mode for NXP platforms
+ *
+ */
+class TextLCD_SPI_N_3_10 : public TextLCD_Base {
+public:
+ /** Create a TextLCD interface using a controller with native SPI3 10 bits interface
+ * Note: current mbed libs only support SPI 10 bit mode for NXP platforms
+ *
+ * @param spi SPI Bus
+ * @param cs chip select pin (active low)
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param bl Backlight control line (optional, default = NC)
+ * @param ctrl LCD controller (default = AIP31068)
+ */
+ TextLCD_SPI_N_3_10(SPI *spi, PinName cs, LCDType type = LCD16x2, PinName bl = NC, LCDCtrl ctrl = AIP31068);
+ virtual ~TextLCD_SPI_N_3_10(void);
+
+private:
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the Enable pin.
+ */
+ virtual void _setEnable(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the RS pin (0 = Command, 1 = Data).
+ */
+ virtual void _setRS(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
+ */
+ virtual void _setBL(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the databus value (4 bit).
+ */
+ virtual void _setData(int value);
+
+/** Low level writes to LCD serial bus only (serial native)
+ */
+ virtual void _writeByte(int value);
+
+// SPI bus
+ SPI *_spi;
+ DigitalOut _cs;
+
+// controlbyte to select between data and command. Internal value for serial bus only
+ char _controlbyte;
+
+//Backlight
+ DigitalOut *_bl;
+};
+
+#endif /* Native SPI bus */
+//-------- End TextLCD_SPI_N_3_10 ----------
+
+
+//------- Start TextLCD_SPI_N_3_16 ---------
+#if(LCD_SPI_N_3_16 == 1) /* Native SPI bus */
+//Code checked out on logic analyser. Not yet tested on hardware..
+
+/** Create a TextLCD interface using a controller with native SPI3 16 bits interface
+ *
+ */
+class TextLCD_SPI_N_3_16 : public TextLCD_Base {
+public:
+ /** Create a TextLCD interface using a controller with native SPI3 16 bits interface
+ *
+ * @param spi SPI Bus
+ * @param cs chip select pin (active low)
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param bl Backlight control line (optional, default = NC)
+ * @param ctrl LCD controller (default = PT6314)
+ */
+ TextLCD_SPI_N_3_16(SPI *spi, PinName cs, LCDType type = LCD16x2, PinName bl = NC, LCDCtrl ctrl = PT6314);
+ virtual ~TextLCD_SPI_N_3_16(void);
+
+private:
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the Enable pin.
+ */
+ virtual void _setEnable(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the RS pin (0 = Command, 1 = Data).
+ */
+ virtual void _setRS(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
+ */
+ virtual void _setBL(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the databus value (4 bit).
+ */
+ virtual void _setData(int value);
+
+/** Low level writes to LCD serial bus only (serial native)
+ */
+ virtual void _writeByte(int value);
+
+// SPI bus
+ SPI *_spi;
+ DigitalOut _cs;
+
+// controlbyte to select between data and command. Internal value for serial bus only
+ char _controlbyte;
+
+//Backlight
+ DigitalOut *_bl;
+};
+#endif /* Native SPI bus */
+//-------- End TextLCD_SPI_N_3_16 ----------
+
+
+//------- Start TextLCD_SPI_N_3_24 ---------
+#if(LCD_SPI_N_3_24 == 1) /* Native SPI bus */
+
+/** Create a TextLCD interface using a controller with native SPI3 24 bits interface
+ * Note: lib uses SPI 8 bit mode
+ *
+ */
+class TextLCD_SPI_N_3_24 : public TextLCD_Base {
+public:
+ /** Create a TextLCD interface using a controller with native SPI3 24 bits interface
+ * Note: lib uses SPI 8 bit mode
+ *
+ * @param spi SPI Bus
+ * @param cs chip select pin (active low)
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param bl Backlight control line (optional, default = NC)
+ * @param ctrl LCD controller (default = SSD1803)
+ */
+ TextLCD_SPI_N_3_24(SPI *spi, PinName cs, LCDType type = LCD16x2, PinName bl = NC, LCDCtrl ctrl = SSD1803_3V3);
+ virtual ~TextLCD_SPI_N_3_24(void);
+
+private:
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the Enable pin.
+ */
+ virtual void _setEnable(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the RS pin (0 = Command, 1 = Data).
+ */
+ virtual void _setRS(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
+ */
+ virtual void _setBL(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the databus value (4 bit).
+ */
+ virtual void _setData(int value);
+
+/** Low level writes to LCD serial bus only (serial native)
+ */
+ virtual void _writeByte(int value);
+
+// SPI bus
+ SPI *_spi;
+ DigitalOut _cs;
+
+// controlbyte to select between data and command. Internal value for serial bus only
+ char _controlbyte;
+
+//Backlight
+ DigitalOut *_bl;
+};
+#endif /* Native SPI bus */
+//-------- End TextLCD_SPI_N_3_24 ----------
+
+
+//--------- Start TextLCD_I2C_N -----------
+#if(LCD_I2C_N == 1) /* Native I2C */
+
+/** Create a TextLCD interface using a controller with native I2C interface
+ *
+ */
+class TextLCD_I2C_N : public TextLCD_Base {
+public:
+ /** Create a TextLCD interface using a controller with native I2C interface
+ *
+ * @param i2c I2C Bus
+ * @param deviceAddress I2C slave address (default = ST7032_SA = 0x7C)
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param bl Backlight control line (optional, default = NC)
+ * @param ctrl LCD controller (default = ST7032_3V3)
+ */
+ TextLCD_I2C_N(I2C *i2c, char deviceAddress = ST7032_SA, LCDType type = LCD16x2, PinName bl = NC, LCDCtrl ctrl = ST7032_3V3);
+ virtual ~TextLCD_I2C_N(void);
+
+private:
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the Enable pin.
+ */
+ virtual void _setEnable(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the RS pin ( 0 = Command, 1 = Data).
+ */
+ virtual void _setRS(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
+ */
+ virtual void _setBL(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the databus value (4 bit).
+ */
+ virtual void _setData(int value);
+
+/** Low level writes to LCD serial bus only (serial native)
+ */
+ virtual void _writeByte(int value);
+
+//I2C bus
+ I2C *_i2c;
+ char _slaveAddress;
+
+// controlbyte to select between data and command. Internal value for serial bus only
+ char _controlbyte;
+
+//Backlight
+ DigitalOut *_bl;
+
+};
+#endif /* Native I2C */
+//---------- End TextLCD_I2C_N ------------
+
+#endif
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TextLCD/TextLCD_Config.h Fri Feb 07 08:37:50 2020 +0000 @@ -0,0 +1,358 @@ +/* mbed TextLCD Library, for a 4-bit LCD based on HD44780 + * Copyright (c) 2014, WH + * 2014, v01: WH, Extracted from TextLCD.h as of v14 + * 2014, v02: WH, Added AC780 support, added I2C expander modules, fixed setBacklight() for inverted logic modules. Fixed bug in LCD_SPI_N define + * 2014, v03: WH, Added LCD_SPI_N_3_8 define for ST7070 + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ +#ifndef MBED_TEXTLCDCONFIG_H +#define MBED_TEXTLCDCONFIG_H + +//Select hardware interface options to reduce memory footprint (multiple options allowed) +#define LCD_I2C 1 /* I2C Expander PCF8574/MCP23008 */ +#define LCD_SPI 1 /* SPI Expander SN74595 */ +#define LCD_I2C_N 1 /* Native I2C bus */ +#define LCD_SPI_N 1 /* Native SPI bus */ +#define LCD_SPI_N_3_8 1 /* Native SPI bus */ +#define LCD_SPI_N_3_9 1 /* Native SPI bus */ +#define LCD_SPI_N_3_10 1 /* Native SPI bus */ +#define LCD_SPI_N_3_16 1 /* Native SPI bus */ +#define LCD_SPI_N_3_24 1 /* Native SPI bus */ + +//Select options to reduce memory footprint (multiple options allowed) +#define LCD_UDC 1 /* Enable predefined UDC example*/ +#define LCD_PRINTF 1 /* Enable Stream implementation */ + +//Pin Defines for I2C PCF8574/PCF8574A or MCP23008 and SPI 74595 bus expander interfaces +//LCD and serial portexpanders should be wired accordingly +// +//Select Hardware module (one option only) +#define DEFAULT 0 +#define ADAFRUIT 0 +#define DFROBOT 0 +#define YWROBOT 1 +#define GYLCD 0 +#define SYDZ 0 + +//Select Hardware module (one option only) +#if (DEFAULT==1) +//Definitions for default (WH) mapping between serial port expander pins and LCD controller +//This hardware supports the I2C bus expander (PCF8574/PCF8574A or MCP23008) and SPI bus expander (74595) interfaces +//See https://mbed.org/cookbook/Text-LCD-Enhanced +// +//Note: LCD RW pin must be connected to GND +// E2 is used for LCD40x4 (second controller) +// BL may be used to control backlight +#define D_LCD_PIN_D4 0 +#define D_LCD_PIN_D5 1 +#define D_LCD_PIN_D6 2 +#define D_LCD_PIN_D7 3 +#define D_LCD_PIN_RS 4 +#define D_LCD_PIN_E 5 +#define D_LCD_PIN_E2 6 +#define D_LCD_PIN_BL 7 + +#define D_LCD_PIN_RW D_LCD_PIN_E2 + +//Select I2C Portexpander type (one option only) +#define PCF8574 1 +#define MCP23008 0 + +//Inverted Backlight control +#define BACKLIGHT_INV 0 +#endif + +#if (ADAFRUIT==1) +//Definitions for Adafruit i2cspilcdbackpack mapping between serial port expander pins and LCD controller +//This hardware supports both an I2C expander (MCP23008) and an SPI expander (74595) selectable by a jumper. +//Slaveaddress may be set by solderbridges (default 0x40). SDA/SCL has pullup Resistors onboard. +//See http://www.ladyada.net/products/i2cspilcdbackpack +// +//Note: LCD RW pin must be kept LOW +// E2 is not available on this hardware and so it does not support LCD40x4 (second controller) +// BL is used to control backlight +#define D_LCD_PIN_0 0 +#define D_LCD_PIN_RS 1 +#define D_LCD_PIN_E 2 +#define D_LCD_PIN_D4 3 +#define D_LCD_PIN_D5 4 +#define D_LCD_PIN_D6 5 +#define D_LCD_PIN_D7 6 +#define D_LCD_PIN_BL 7 + +#define D_LCD_PIN_E2 D_LCD_PIN_0 + +//Force I2C portexpander type +#define PCF8574 0 +#define MCP23008 1 + +//Inverted Backlight control +#define BACKLIGHT_INV 0 +#endif + +#if (DFROBOT==1) +//Definitions for DFROBOT LCD2004 Module mapping between serial port expander pins and LCD controller +//This hardware uses PCF8574 and is different from earlier/different Arduino I2C LCD displays +//Slaveaddress hardwired to 0x4E. SDA/SCL has pullup Resistors onboard. +//See http://arduino-info.wikispaces.com/LCD-Blue-I2C +// +//Definitions for DFROBOT V1.1 +//This hardware uses PCF8574. Slaveaddress may be set by jumpers (default 0x40). +//SDA/SCL has pullup Resistors onboard and features a voltage level converter 3V3 <-> 5V. +//See http://www.dfrobot.com/index.php?route=product/product&product_id=135 +// +// +//Note: LCD RW pin must be kept LOW +// E2 is not available on default Arduino hardware and so it does not support LCD40x4 (second controller) +// BL is used to control backlight +#define D_LCD_PIN_RS 0 +#define D_LCD_PIN_RW 1 +#define D_LCD_PIN_E 2 +#define D_LCD_PIN_BL 3 +#define D_LCD_PIN_D4 4 +#define D_LCD_PIN_D5 5 +#define D_LCD_PIN_D6 6 +#define D_LCD_PIN_D7 7 + +#define D_LCD_PIN_E2 D_LCD_PIN_RW + +//Force I2C portexpander type +#define PCF8574 1 +#define MCP23008 0 + +//Inverted Backlight control +#define BACKLIGHT_INV 0 +#endif + +#if (YWROBOT==1) +//Definitions for YWROBOT LCM1602 V1 Module mapping between serial port expander pins and LCD controller. +//Very similar to DFROBOT. This hardware uses PCF8574. +//Slaveaddress may be set by solderbridges (default 0x4E). SDA/SCL has no pullup Resistors onboard. +//See http://arduino-info.wikispaces.com/LCD-Blue-I2C +// +//Note: LCD RW pin must be kept LOW +// E2 is not available on default hardware and so it does not support LCD40x4 (second controller) +// BL is used to control backlight, reverse logic: Low turns on Backlight. This is handled in setBacklight() +#define D_LCD_PIN_RS 0 +#define D_LCD_PIN_RW 1 +#define D_LCD_PIN_E 2 +#define D_LCD_PIN_BL 3 +#define D_LCD_PIN_D4 4 +#define D_LCD_PIN_D5 5 +#define D_LCD_PIN_D6 6 +#define D_LCD_PIN_D7 7 + +#define D_LCD_PIN_E2 D_LCD_PIN_RW + +//Force I2C portexpander type +#define PCF8574 1 +#define MCP23008 0 + +//Inverted Backlight control +#define BACKLIGHT_INV 0 +#endif + +#if (GYLCD==1) +//Definitions for Arduino-IIC-LCD GY-LCD-V1 Module mapping between serial port expander pins and LCD controller. +//Very similar to DFROBOT. This hardware uses PCF8574. +//Slaveaddress may be set by solderbridges (default 0x4E). SDA/SCL has pullup Resistors onboard. +//See http://arduino-info.wikispaces.com/LCD-Blue-I2C +// +//Note: LCD RW pin must be kept LOW +// E2 is not available on default hardware and so it does not support LCD40x4 (second controller) +// BL is used to control backlight, reverse logic: Low turns on Backlight. This is handled in setBacklight() +#define D_LCD_PIN_D4 0 +#define D_LCD_PIN_D5 1 +#define D_LCD_PIN_D6 2 +#define D_LCD_PIN_D7 3 +#define D_LCD_PIN_EN 4 +#define D_LCD_PIN_RW 5 +#define D_LCD_PIN_RS 6 +#define D_LCD_PIN_BL 7 + +#define D_LCD_PIN_E2 D_LCD_PIN_RW + +//Force I2C portexpander type +#define PCF8574 1 +#define MCP23008 0 + +//Force Inverted Backlight control +#define BACKLIGHT_INV 1 +#endif + +#if (SYDZ==1) +//Definitions for SYDZ Module mapping between serial port expander pins and LCD controller. +//Very similar to DFROBOT. This hardware uses PCF8574A and uses inverted Backlight control +//Slaveaddress may be set by switches (default 0x40). SDA/SCL has pullup Resistors onboard. +//See ebay +// +//Note: LCD RW pin must be kept LOW +// E2 is not available on default hardware and so it does not support LCD40x4 (second controller) +// BL is used to control backlight, reverse logic: Low turns on Backlight. This is handled in setBacklight() +#define D_LCD_PIN_RS 0 +#define D_LCD_PIN_RW 1 +#define D_LCD_PIN_E 2 +#define D_LCD_PIN_BL 3 +#define D_LCD_PIN_D4 4 +#define D_LCD_PIN_D5 5 +#define D_LCD_PIN_D6 6 +#define D_LCD_PIN_D7 7 + +#define D_LCD_PIN_E2 D_LCD_PIN_RW + +//Force I2C portexpander type +#define PCF8574 1 +#define MCP23008 0 + +//Force Inverted Backlight control +#define BACKLIGHT_INV 1 +#endif + +//Bitpattern Defines for I2C PCF8574/PCF8574A, MCP23008 and SPI 74595 Bus expanders +// +#define D_LCD_D4 (1<<D_LCD_PIN_D4) +#define D_LCD_D5 (1<<D_LCD_PIN_D5) +#define D_LCD_D6 (1<<D_LCD_PIN_D6) +#define D_LCD_D7 (1<<D_LCD_PIN_D7) +#define D_LCD_RS (1<<D_LCD_PIN_RS) +#define D_LCD_E (1<<D_LCD_PIN_E) +#define D_LCD_E2 (1<<D_LCD_PIN_E2) +#define D_LCD_BL (1<<D_LCD_PIN_BL) +//#define D_LCD_RW (1<<D_LCD_PIN_RW) + +#define D_LCD_BUS_MSK (D_LCD_D4 | D_LCD_D5 | D_LCD_D6 | D_LCD_D7) +#define D_LCD_BUS_DEF 0x00 + +/* PCF8574/PCF8574A I2C portexpander slave address */ +#define PCF8574_SA0 0x40 +#define PCF8574_SA1 0x42 +#define PCF8574_SA2 0x44 +#define PCF8574_SA3 0x46 +#define PCF8574_SA4 0x48 +#define PCF8574_SA5 0x4A +#define PCF8574_SA6 0x4C +#define PCF8574_SA7 0x4E + +#define PCF8574A_SA0 0x70 +#define PCF8574A_SA1 0x72 +#define PCF8574A_SA2 0x74 +#define PCF8574A_SA3 0x76 +#define PCF8574A_SA4 0x78 +#define PCF8574A_SA5 0x7A +#define PCF8574A_SA6 0x7C +#define PCF8574A_SA7 0x7E + +/* MCP23008 I2C portexpander slave address */ +#define MCP23008_SA0 0x40 +#define MCP23008_SA1 0x42 +#define MCP23008_SA2 0x44 +#define MCP23008_SA3 0x46 +#define MCP23008_SA4 0x48 +#define MCP23008_SA5 0x4A +#define MCP23008_SA6 0x4C +#define MCP23008_SA7 0x4E + +/* MCP23008 I2C portexpander internal registers */ +#define IODIR 0x00 +#define IPOL 0x01 +#define GPINTEN 0x02 +#define DEFVAL 0x03 +#define INTCON 0x04 +#define IOCON 0x05 +#define GPPU 0x06 +#define INTF 0x07 +#define INTCAP 0x08 +#define GPIO 0x09 +#define OLAT 0x0A + +/* ST7032i I2C slave address */ +#define ST7032_SA 0x7C + +/* ST7036i I2C slave address */ +#define ST7036_SA0 0x78 +#define ST7036_SA1 0x7A +#define ST7036_SA2 0x7C +#define ST7036_SA3 0x7E + +/* PCF21XX I2C slave address */ +#define PCF21XX_SA0 0x74 +#define PCF21XX_SA1 0x76 + +/* AIP31068 I2C slave address */ +#define AIP31068_SA 0x7C + +/* SSD1803 I2C slave address */ +#define SSD1803_SA0 0x78 +#define SSD1803_SA1 0x7A + +/* US2066/SSD1311 I2C slave address */ +#define US2066_SA0 0x78 +#define US2066_SA1 0x7A + +/* AC780 I2C slave address */ +#define AC780_SA0 0x78 +#define AC780_SA1 0x7A +#define AC780_SA2 0x7C +#define AC780_SA3 0x7E + +//Some native I2C controllers dont support ACK. Set define to '0' to allow code to proceed even without ACK +//#define LCD_I2C_ACK 0 +#define LCD_I2C_ACK 1 + + +// Contrast setting, 6 significant bits (only supported for controllers with extended features) +// Voltage Multiplier setting, 2 or 3 significant bits (only supported for controllers with extended features) +#define LCD_DEF_CONTRAST 0x20 + +//ST7032 EastRising ERC1602FS-4 display +//Contrast setting 6 significant bits +//Voltage Multiplier setting 3 significant bits +#define LCD_ST7032_CONTRAST 0x18 +#define LCD_ST7032_RAB 0x04 + +//ST7036 EA DOGM1603 display +//Contrast setting 6 significant bits +//Voltage Multiplier setting 3 significant bits +#define LCD_ST7036_CONTRAST 0x28 +#define LCD_ST7036_RAB 0x04 + +//SSD1803 EA DOGM204 display +//Contrast setting 6 significant bits +//Voltage Multiplier setting 3 significant bits +#define LCD_SSD1_CONTRAST 0x28 +#define LCD_SSD1_RAB 0x06 + +//US2066/SSD1311 EastRising ER-OLEDM2002-4 display +//Contrast setting 8 significant bits, use 6 for compatibility +#define LCD_US20_CONTRAST 0x3F +//#define LCD_US20_CONTRAST 0x1F + +//PCF2113, PCF2119 display +//Contrast setting 6 significant bits +//Voltage Multiplier setting 2 significant bits +#define LCD_PCF2_CONTRAST 0x20 +#define LCD_PCF2_S12 0x02 + +//PT6314 VFD display +//Contrast setting 2 significant bits, use 6 for compatibility +#define LCD_PT63_CONTRAST 0x3F + + +#endif //MBED_TEXTLCDCONFIG_H
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TextLCD/TextLCD_UDC.h Fri Feb 07 08:37:50 2020 +0000 @@ -0,0 +1,89 @@ +/* mbed TextLCD Library, for a 4-bit LCD based on HD44780 + * Copyright (c) 2014, WH + * 2014, v01: WH, Extracted from TextLCD.h as of v14 + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ +#ifndef MBED_TEXTLCDUDC_H +#define MBED_TEXTLCDUDC_H + +#include "TextLCD_Config.h" + +/** Some sample User Defined Chars 5x7 dots */ +#if(LCD_UDC == 1) +//extern const char udc_ae[]; //æ +//extern const char udc_0e[]; //ø +//extern const char udc_ao[]; //å +//extern const char udc_AE[]; //Æ +//extern const char udc_0E[]; //Ø +//extern const char udc_Ao[]; //Å +//extern const char udc_PO[]; //Padlock Open +//extern const char udc_PC[]; //Padlock Closed + +//extern const char udc_alpha[]; //alpha +//extern const char udc_ohm[]; //ohm +//extern const char udc_sigma[]; //sigma +//extern const char udc_pi[]; //pi +//extern const char udc_root[]; //root + +extern const char udc_0[]; // |> +extern const char udc_1[]; // <| +extern const char udc_2[]; // | +extern const char udc_3[]; // || +extern const char udc_4[]; // ||| +extern const char udc_5[]; // = +extern const char udc_6[]; // checkerboard +extern const char udc_7[]; // \ + +extern const char udc_degr[]; // Degree symbol + +extern const char udc_TM_T[]; // Trademark T +extern const char udc_TM_M[]; // Trademark M + +//extern const char udc_Bat_Hi[]; // Battery Full +//extern const char udc_Bat_Ha[]; // Battery Half +//extern const char udc_Bat_Lo[]; // Battery Low +extern const char udc_Bat_Hi[]; // Battery Full +extern const char udc_Bat_Ha[]; // Battery Half +extern const char udc_Bat_Lo[]; // Battery Low +extern const char udc_AC[]; // AC Power + +extern const char udc_smiley[]; // Smiley +//extern const char udc_droopy[]; // Droopey +//extern const char udc_note[]; // Note + +//extern const char udc_bar_1[]; // Bar 1 +//extern const char udc_bar_2[]; // Bar 11 +//extern const char udc_bar_3[]; // Bar 111 +//extern const char udc_bar_4[]; // Bar 1111 +//extern const char udc_bar_5[]; // Bar 11111 + +//extern const char udc_ch_1[]; // Hor bars 4 +//extern const char udc_ch_2[]; // Hor bars 4 (inverted) +//extern const char udc_ch_3[]; // Ver bars 3 +//extern const char udc_ch_4[]; // Ver bars 3 (inverted) +//extern const char udc_ch_yr[]; // Year (kana) +//extern const char udc_ch_mo[]; // Month (kana) +//extern const char udc_ch_dy[]; // Day (kana) +//extern const char udc_ch_mi[]; // minute (kana) +extern const char udc_None[]; +extern const char udc_All[]; +#endif /* LCD_UDC Examples */ + +#endif // MBED_TEXTLCDUDC_H
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TextLCD/TextLCD_UDC.inc Fri Feb 07 08:37:50 2020 +0000
@@ -0,0 +1,113 @@
+/* mbed TextLCD Library, for a 4-bit LCD based on HD44780
+ * Copyright (c) 2014, WH
+ * 2014, v01: WH, Extracted from TextLCD.cpp as of v14
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+#include "TextLCD_Config.h"
+
+#if(LCD_UDC == 1)
+// User Defined Characters (UDCs) are defined by an 8 byte bitpattern. The P0..P5 form the character pattern.
+// P7 P6 P5 P4 P3 P2 P1 P0
+// 0 B1 B0 x 0 1 1 1 0
+// 1 B1 B0 x 1 0 0 0 1
+// . .............
+// 7 B1 B0 x 1 0 0 0 1
+//
+// Blinking UDCs are enabled when a specific controlbit (BE) is set.
+// The blinking pixels in the UDC can be controlled by setting additional bits in the UDC bitpattern.
+// Bit 6 and Bit 7 in the pattern will control the blinking mode when Blink is enabled through BE.
+// B1 B0 Mode
+// 0 0 No Blinking in this row of the UDC
+// 0 1 Enabled pixels in P4 will blink
+// 1 x Enabled pixels in P0..P4 will blink
+
+/** Some sample User Defined Chars 5x7 dots */
+//const char udc_ae[] = {0x00, 0x00, 0x1B, 0x05, 0x1F, 0x14, 0x1F, 0x00}; //æ
+//const char udc_0e[] = {0x00, 0x00, 0x0E, 0x13, 0x15, 0x19, 0x0E, 0x00}; //ø
+//const char udc_ao[] = {0x0E, 0x0A, 0x0E, 0x01, 0x0F, 0x11, 0x0F, 0x00}; //å
+//const char udc_AE[] = {0x0F, 0x14, 0x14, 0x1F, 0x14, 0x14, 0x17, 0x00}; //Æ
+//const char udc_0E[] = {0x0E, 0x13, 0x15, 0x15, 0x15, 0x19, 0x0E, 0x00}; //Ø
+//const char udc_Ao[] = {0x0E, 0x0A, 0x0E, 0x11, 0x1F, 0x11, 0x11, 0x00}; //Å
+//const char udc_PO[] = {0x04, 0x0A, 0x0A, 0x1F, 0x1B, 0x1B, 0x1F, 0x00}; //Padlock Open
+//const char udc_PC[] = {0x1C, 0x10, 0x08, 0x1F, 0x1B, 0x1B, 0x1F, 0x00}; //Padlock Closed
+
+//const char udc_alpha[] = {0x00, 0x00, 0x0D, 0x12, 0x12, 0x12, 0x0D, 0x00}; //alpha
+//const char udc_ohm[] = {0x0E, 0x11, 0x11, 0x11, 0x0A, 0x0A, 0x1B, 0x00}; //ohm
+//const char udc_sigma[] = {0x1F, 0x08, 0x04, 0x02, 0x04, 0x08, 0x1F, 0x00}; //sigma
+//const char udc_pi[] = {0x1F, 0x0A, 0x0A, 0x0A, 0x0A, 0x0A, 0x0A, 0x00}; //pi
+//const char udc_root[] = {0x07, 0x04, 0x04, 0x04, 0x14, 0x0C, 0x04, 0x00}; //root
+
+const char udc_0[] = {0x18, 0x14, 0x12, 0x11, 0x12, 0x14, 0x18, 0x00}; // |>
+const char udc_1[] = {0x03, 0x05, 0x09, 0x11, 0x09, 0x05, 0x03, 0x00}; // <|
+const char udc_2[] = {0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x00}; // |
+const char udc_3[] = {0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x00}; // ||
+const char udc_4[] = {0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x00}; // |||
+const char udc_5[] = {0x00, 0x1f, 0x00, 0x1f, 0x00, 0x1f, 0x00, 0x00}; // =
+const char udc_6[] = {0x15, 0x0a, 0x15, 0x0a, 0x15, 0x0a, 0x15, 0x00}; // checkerboard
+const char udc_7[] = {0x10, 0x08, 0x04, 0x02, 0x01, 0x00, 0x10, 0x00}; // \
+
+const char udc_degr[] = {0x06, 0x09, 0x09, 0x06, 0x00, 0x00, 0x00, 0x00}; // Degree symbol
+
+const char udc_TM_T[] = {0x1F, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00}; // Trademark T
+const char udc_TM_M[] = {0x11, 0x1B, 0x15, 0x11, 0x00, 0x00, 0x00, 0x00}; // Trademark M
+
+//const char udc_Bat_Hi[] = {0x0E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00}; // Battery Full
+//const char udc_Bat_Ha[] = {0x0E, 0x11, 0x13, 0x17, 0x1F, 0x1F, 0x1F, 0x00}; // Battery Half
+//const char udc_Bat_Lo[] = {0x0E, 0x11, 0x11, 0x11, 0x11, 0x11, 0x1F, 0x00}; // Battery Low
+//const char udc_Bat_Hi[] = {0x0E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00}; // Battery Full
+//const char udc_Bat_Ha[] = {0x0E, 0x11, 0x11, 0x1F, 0x1F, 0x1F, 0x1F, 0x00}; // Battery Half
+//const char udc_Bat_Lo[] = {0x0E, 0x11, 0x11, 0x11, 0x11, 0x1F, 0x1F, 0x00}; // Battery Low
+const char udc_Bat_Hi[] = {0x8E, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x00}; // Battery Full, Blink
+const char udc_Bat_Ha[] = {0x8E, 0x91, 0x91, 0x9F, 0x9F, 0x9F, 0x9F, 0x00}; // Battery Half, Blink
+const char udc_Bat_Lo[] = {0x8E, 0x91, 0x91, 0x91, 0x91, 0x9F, 0x9F, 0x00}; // Battery Low, Blink
+const char udc_AC[] = {0x0A, 0x0A, 0x1F, 0x11, 0x0E, 0x04, 0x04, 0x00}; // AC Power
+
+const char udc_smiley[] = {0x00, 0x0A, 0x00, 0x04, 0x11, 0x0E, 0x00, 0x00}; // Smiley
+//const char udc_droopy[] = {0x00, 0x0A, 0x00, 0x04, 0x00, 0x0E, 0x11, 0x00}; // Droopey
+//const char udc_note[] = {0x01, 0x03, 0x05, 0x09, 0x0B, 0x1B, 0x18, 0x00}; // Note
+
+//const char udc_bar_1[] = {0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x00}; // Bar 1
+//const char udc_bar_2[] = {0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x00}; // Bar 11
+//const char udc_bar_3[] = {0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x00}; // Bar 111
+//const char udc_bar_4[] = {0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x00}; // Bar 1111
+//const char udc_bar_5[] = {0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00}; // Bar 11111
+
+//const char udc_ch_1[] = {0x1f, 0x00, 0x1f, 0x00, 0x1f, 0x00, 0x1f, 0x00}; // Hor bars 4
+//const char udc_ch_2[] = {0x00, 0x1f, 0x00, 0x1f, 0x00, 0x1f, 0x00, 0x1f}; // Hor bars 4 (inverted)
+//const char udc_ch_3[] = {0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15}; // Ver bars 3
+//const char udc_ch_4[] = {0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a}; // Ver bars 3 (inverted)
+//const char udc_ch_yr[] = {0x08, 0x0f, 0x12, 0x0f, 0x0a, 0x1f, 0x02, 0x02}; // Year (kana)
+//const char udc_ch_mo[] = {0x0f, 0x09, 0x0f, 0x09, 0x0f, 0x09, 0x09, 0x13}; // Month (kana)
+//const char udc_ch_dy[] = {0x1f, 0x11, 0x11, 0x1f, 0x11, 0x11, 0x11, 0x1F}; // Day (kana)
+//const char udc_ch_mi[] = {0x0C, 0x0a, 0x11, 0x1f, 0x09, 0x09, 0x09, 0x13}; // minute (kana)
+
+//const char udc_bell[] = {0x04,0x0E,0x0E,0x0E,0x1F,0x00,0x04};
+//const char udc_note[] = {0x02,0x03,0x02,0x0E,0x1E,0x0C,0x00};
+//const char udc_clock[] = {0x00,0x0E,0x15,0x17,0x11,0x0E,0x00};
+//const char udc_heart[] = {0x00,0x0a,0x1F,0x1F,0x0E,0x04,0x00};
+//const char udc_duck[] = {0x00,0x0c,0x1D,0x0F,0x0F,0x06,0x00};
+//const char udc_check[] = {0x00,0x01,0x03,0x16,0x1C,0x08,0x00};
+//const char udc_cross[] = {0x00,0x1B,0x0E,0x04,0x0E,0x1B,0x00};
+//const char udc_retarrow[] = {0x01,0x01,0x05,0x09,0x1f,0x08,0x04};
+
+const char udc_None[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+const char udc_All[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
+#endif /* UDC_EXAMPLES */
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Fri Feb 07 08:37:50 2020 +0000
@@ -0,0 +1,18 @@
+#include "mbed.h"
+
+PwmOut mypwm(PWM_OUT);
+
+DigitalOut myled(LED1);
+
+int main() {
+
+ mypwm.period_ms(10);
+ mypwm.pulsewidth_ms(1);
+
+ printf("pwm set to %.2f %%\n", mypwm.read() * 100);
+
+ while(1) {
+ myled = !myled;
+ wait(1);
+ }
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-os.lib Fri Feb 07 08:37:50 2020 +0000 @@ -0,0 +1,1 @@ +https://os.mbed.com/teams/EL4121-Embedded-System/code/mbed-os/#b74591d5ab33