Four Squared / Mbed 2 deprecated SinWave

test00

Dependencies:   MCP4725 mbed

Fork of test01 by Four Squared

mcp4725.h@2:76f0ff8c3068, 2016-11-09 (annotated)

Committer:
zzl5143
Date:
Wed Nov 09 17:17:07 2016 +0000
Revision:
2:76f0ff8c3068
Parent:
0:77006df50c28 
Sin wave test;

Who changed what in which revision?

UserRevisionLine numberNew contents of line
xWhitfordx 0:77006df50c28 1 #ifndef MCP_4725_H
xWhitfordx 0:77006df50c28 2 #define MCP_4725_H
xWhitfordx 0:77006df50c28 3
xWhitfordx 0:77006df50c28 4 #include "stdbool.h"
xWhitfordx 0:77006df50c28 5 #include "mbed.h"
xWhitfordx 0:77006df50c28 6 #include "I2C.h"
xWhitfordx 0:77006df50c28 7
xWhitfordx 0:77006df50c28 8
xWhitfordx 0:77006df50c28 9 /** MCP4725 class.
xWhitfordx 0:77006df50c28 10 * Used for interfacing with a mcp4725 12-Bit Digital-to-Analog Converter.
xWhitfordx 0:77006df50c28 11 * To convert between the 12bit dac_value and Vout, use the following formula: dac_value = (Vout*4096/Vref), where Vout is
xWhitfordx 0:77006df50c28 12 * the desired output analog voltage, Vref is the voltage connected to the Vdd pin of the device. Typically Vdd will be 3.3volts.
xWhitfordx 0:77006df50c28 13 *
xWhitfordx 0:77006df50c28 14 * Note: There is an accompanying test suite program "MCP_4725_Library_Test" that can be used to test this library.
xWhitfordx 0:77006df50c28 15 *
xWhitfordx 0:77006df50c28 16 */
xWhitfordx 0:77006df50c28 17 class MCP4725
xWhitfordx 0:77006df50c28 18 {
xWhitfordx 0:77006df50c28 19 public:
xWhitfordx 0:77006df50c28 20 /** The device supports two types of power modes: normal and power-down. In normal mode the device
xWhitfordx 0:77006df50c28 21 * operates a normal digital to analog conversion. In power-down mode all digitial to analog
xWhitfordx 0:77006df50c28 22 * conversion is stopped, resulting in the device using less power (typically 60nA). Also, in power
xWhitfordx 0:77006df50c28 23 * down mode Vout will be pulled to ground using either a 1k, 100k or 500k ohm internal resistors. */
xWhitfordx 0:77006df50c28 24 enum PowerMode {
xWhitfordx 0:77006df50c28 25 /** In normal mode the device operates a normal D2A conversion. */
xWhitfordx 0:77006df50c28 26 Normal=0,
xWhitfordx 0:77006df50c28 27 /** Enter the device into a power down mode, and pull Vout to ground using an internal 1k resistor. */
xWhitfordx 0:77006df50c28 28 PowerDown1k=1,
xWhitfordx 0:77006df50c28 29 /** Enter the device into a power down mode, and pull Vout to ground using an internal 100k resistor. */
xWhitfordx 0:77006df50c28 30 PowerDown100k=2,
xWhitfordx 0:77006df50c28 31 /** Enter the device into a power down mode, and pull Vout to ground using an internal 500k resistor. */
xWhitfordx 0:77006df50c28 32 PowerDown500k=3
xWhitfordx 0:77006df50c28 33 };
xWhitfordx 0:77006df50c28 34
xWhitfordx 0:77006df50c28 35 /** The device supports 3 different I2C bus frequencies.*/
xWhitfordx 0:77006df50c28 36 enum BusFrequency {
xWhitfordx 0:77006df50c28 37 /** Standard 100kHz bus. */
xWhitfordx 0:77006df50c28 38 Standard100kHz,
xWhitfordx 0:77006df50c28 39 /** Fast 400kHz bus. */
xWhitfordx 0:77006df50c28 40 Fast400kHz,
xWhitfordx 0:77006df50c28 41 /** High Speed 3.4Mhz bus. WARNING: the test suite fails for the mbed LPC1768 when this frequency is selected - not tested on other platforms.*/
xWhitfordx 0:77006df50c28 42 HighSpeed3_4Mhz
xWhitfordx 0:77006df50c28 43 };
xWhitfordx 0:77006df50c28 44
xWhitfordx 0:77006df50c28 45 /** Create an mcp4725 I2C interface
xWhitfordx 0:77006df50c28 46 *
xWhitfordx 0:77006df50c28 47 * @param sda I2C data line pin
xWhitfordx 0:77006df50c28 48 * @param scl I2C clock line pin
xWhitfordx 0:77006df50c28 49 * @param bus_frequency the frequency at which the I2C bus is running.
xWhitfordx 0:77006df50c28 50 * @param device_address_bits The 3bit address bits of the device.
xWhitfordx 0:77006df50c28 51 */
xWhitfordx 0:77006df50c28 52 MCP4725(PinName sda, PinName scl, BusFrequency bus_frequency, int device_address_bits);
xWhitfordx 0:77006df50c28 53
xWhitfordx 0:77006df50c28 54
xWhitfordx 0:77006df50c28 55 /* Update the power mode and DAC value.
xWhitfordx 0:77006df50c28 56 *
xWhitfordx 0:77006df50c28 57 * @param mode The Power mode to set the device into.
xWhitfordx 0:77006df50c28 58 * @param dac_value The 12bit dac register data value.
xWhitfordx 0:77006df50c28 59 * @param writeToEeprom True if the config is to be stored
xWhitfordx 0:77006df50c28 60 * in eeprom, otherwise false
xWhitfordx 0:77006df50c28 61 *
xWhitfordx 0:77006df50c28 62 * @returns
xWhitfordx 0:77006df50c28 63 * 0 on success,
xWhitfordx 0:77006df50c28 64 * non-0 on failure
xWhitfordx 0:77006df50c28 65 */
xWhitfordx 0:77006df50c28 66 int write(enum PowerMode mode, int dac_value, bool writeToEeprom);
xWhitfordx 0:77006df50c28 67
xWhitfordx 0:77006df50c28 68
xWhitfordx 0:77006df50c28 69 /** Read the contents of the dac register, the contents of eeprom, and if an eeprom write is currently active.
xWhitfordx 0:77006df50c28 70 *
xWhitfordx 0:77006df50c28 71 * @param mode Pointer to variable to store the current power mode.
xWhitfordx 0:77006df50c28 72 * @param mode_eeprom Pointer to variable to store the power mode as is stored in eeprom.
xWhitfordx 0:77006df50c28 73 * @param dac_value Pointer to variable to store the current dac value.
xWhitfordx 0:77006df50c28 74 * @param dac_value_eeprom Pointer to variable to store the dac value as is stored in eeprom.
xWhitfordx 0:77006df50c28 75 * @param eeprom_write_in_progress Pointer to variable to store the current eeprom write status.
xWhitfordx 0:77006df50c28 76 *
xWhitfordx 0:77006df50c28 77 * @returns
xWhitfordx 0:77006df50c28 78 * 0 on success,
xWhitfordx 0:77006df50c28 79 * non-0 on failure
xWhitfordx 0:77006df50c28 80 */
xWhitfordx 0:77006df50c28 81 int read(enum PowerMode* mode, enum PowerMode* mode_eeprom, int* dac_value, int* dac_value_eeprom, bool* eeprom_write_in_progress);
xWhitfordx 0:77006df50c28 82
xWhitfordx 0:77006df50c28 83 protected:
xWhitfordx 0:77006df50c28 84 /** mbed I2C interface driver. */
xWhitfordx 0:77006df50c28 85 I2C _i2c_interface;
xWhitfordx 0:77006df50c28 86 /** The full i2c device address. */
xWhitfordx 0:77006df50c28 87 int _device_address;
xWhitfordx 0:77006df50c28 88
xWhitfordx 0:77006df50c28 89 };
xWhitfordx 0:77006df50c28 90
xWhitfordx 0:77006df50c28 91 #endif