//#if !FEATURE_LWIP // #error [NOT_SUPPORTED] LWIP not supported for this target //#endif // ref // https://os.mbed.com/questions/76794/How-to-set-Static-IP-address-with-Nucleo/ // https://os.mbed.com/docs/mbed-os/v5.11/apis/ethernet.html #include "mbed.h" #include "EthernetInterface.h" #include "TCPServer.h" #include "TCPSocket.h" #define HTTP_STATUS_LINE "HTTP/1.0 200 OK" #define HTTP_HEADER_FIELDS "Content-Type: text/html; charset=utf-8" #define HTTP_MESSAGE_BODY "" \ "" "\r\n" \ " " "\r\n" \ "
" "\r\n" \ "

Hello World

" "\r\n" \ "

Finally It works !

" "\r\n" \ "
" "\r\n" \ " " "\r\n" \ "" #define HTTP_RESPONSE HTTP_STATUS_LINE "\r\n" \ HTTP_HEADER_FIELDS "\r\n" \ "\r\n" \ HTTP_MESSAGE_BODY "\r\n" Serial pc(SERIAL_TX, SERIAL_RX); int main() { pc.baud(57600); pc.printf("Basic HTTP server example\r\n"); EthernetInterface eth; eth.set_network("192.168.1.11","255.255.252.0","192.168.1.10"); //eth.set_network(IP_Adress,GATEWAY,MASK); eth.connect(); pc.printf("The target IP address is '%s'\r\n", eth.get_ip_address()); TCPServer srv; TCPSocket clt_sock; SocketAddress clt_addr; /* Open the server on ethernet stack */ srv.open(ð); /* Bind the HTTP port (TCP 22) to the server */ srv.bind(eth.get_ip_address(), 80); /* Can handle 5 simultaneous connections */ srv.listen(5); char buffer[300]; while (true) { srv.accept(&clt_sock, &clt_addr); pc.printf("accept %s:%d\r\n", clt_addr.get_ip_address(), clt_addr.get_port()); clt_sock.send(HTTP_RESPONSE, strlen(HTTP_RESPONSE)); // example to move messages between uart and tcp / ip socket while (0) { if (1) { while (pc.readable()) { char c = pc.getc(); // Read hyperterminal buffer[0] = c; clt_sock.send(buffer, 1); //echo pc.printf("%c", c); } } else { // blocking mode int recdata = clt_sock.recv(buffer,300); if (recdata >0 ){ buffer[recdata]=0; printf("%s %d\r\n", buffer, recdata); // echo buffer[recdata]=10; buffer[recdata+1]=13; clt_sock.send(buffer, recdata+2); } } } } }