FFT LED Display
help :(
Dependencies: FFT
Diff: FATFileSystem/ChaN/ffconf.h
- Revision:
- 0:d6c9b09b4042
diff -r 000000000000 -r d6c9b09b4042 FATFileSystem/ChaN/ffconf.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/FATFileSystem/ChaN/ffconf.h Wed Dec 02 18:02:03 2020 +0000 @@ -0,0 +1,285 @@ +/*---------------------------------------------------------------------------/ +/ FatFs - FAT file system module configuration file R0.11a (C)ChaN, 2015 +/---------------------------------------------------------------------------*/ + +#define _FFCONF 64180 /* Revision ID */ + +#define FFS_DBG 0 + +/*---------------------------------------------------------------------------/ +/ Function Configurations +/---------------------------------------------------------------------------*/ + +#define _FS_READONLY 0 +/* This option switches read-only configuration. (0:Read/Write or 1:Read-only) +/ Read-only configuration removes writing API functions, f_write(), f_sync(), +/ f_unlink(), f_mkdir(), f_chmod(), f_rename(), f_truncate(), f_getfree() +/ and optional writing functions as well. */ + + +#define _FS_MINIMIZE 0 +/* This option defines minimization level to remove some basic API functions. +/ +/ 0: All basic functions are enabled. +/ 1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_chmod(), f_utime(), +/ f_truncate() and f_rename() function are removed. +/ 2: f_opendir(), f_readdir() and f_closedir() are removed in addition to 1. +/ 3: f_lseek() function is removed in addition to 2. */ + + +#define _USE_STRFUNC 0 +/* This option switches string functions, f_gets(), f_putc(), f_puts() and +/ f_printf(). +/ +/ 0: Disable string functions. +/ 1: Enable without LF-CRLF conversion. +/ 2: Enable with LF-CRLF conversion. */ + + +#define _USE_FIND 0 +/* This option switches filtered directory read feature and related functions, +/ f_findfirst() and f_findnext(). (0:Disable or 1:Enable) */ + + +#define _USE_MKFS 1 +/* This option switches f_mkfs() function. (0:Disable or 1:Enable) */ + + +#define _USE_FASTSEEK 0 +/* This option switches fast seek feature. (0:Disable or 1:Enable) */ + + +#define _USE_LABEL 0 +/* This option switches volume label functions, f_getlabel() and f_setlabel(). +/ (0:Disable or 1:Enable) */ + + +#define _USE_FORWARD 0 +/* This option switches f_forward() function. (0:Disable or 1:Enable) +/ To enable it, also _FS_TINY need to be set to 1. */ + + +/*---------------------------------------------------------------------------/ +/ Locale and Namespace Configurations +/---------------------------------------------------------------------------*/ + +#define _CODE_PAGE 850 +/* This option specifies the OEM code page to be used on the target system. +/ Incorrect setting of the code page can cause a file open failure. +/ +/ 1 - ASCII (No extended character. Non-LFN cfg. only) +/ 437 - U.S. +/ 720 - Arabic +/ 737 - Greek +/ 771 - KBL +/ 775 - Baltic +/ 850 - Latin 1 +/ 852 - Latin 2 +/ 855 - Cyrillic +/ 857 - Turkish +/ 860 - Portuguese +/ 861 - Icelandic +/ 862 - Hebrew +/ 863 - Canadian French +/ 864 - Arabic +/ 865 - Nordic +/ 866 - Russian +/ 869 - Greek 2 +/ 932 - Japanese (DBCS) +/ 936 - Simplified Chinese (DBCS) +/ 949 - Korean (DBCS) +/ 950 - Traditional Chinese (DBCS) +*/ + + +#define _USE_LFN 1 +#define _MAX_LFN 255 +/* The _USE_LFN option switches the LFN feature. +/ +/ 0: Disable LFN feature. _MAX_LFN has no effect. +/ 1: Enable LFN with static working buffer on the BSS. Always NOT thread-safe. +/ 2: Enable LFN with dynamic working buffer on the STACK. +/ 3: Enable LFN with dynamic working buffer on the HEAP. +/ +/ When enable the LFN feature, Unicode handling functions (option/unicode.c) must +/ be added to the project. The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes. +/ When use stack for the working buffer, take care on stack overflow. When use heap +/ memory for the working buffer, memory management functions, ff_memalloc() and +/ ff_memfree(), must be added to the project. */ + + +#define _LFN_UNICODE 0 +/* This option switches character encoding on the API. (0:ANSI/OEM or 1:Unicode) +/ To use Unicode string for the path name, enable LFN feature and set _LFN_UNICODE +/ to 1. This option also affects behavior of string I/O functions. */ + + +#define _STRF_ENCODE 3 +/* When _LFN_UNICODE is 1, this option selects the character encoding on the file to +/ be read/written via string I/O functions, f_gets(), f_putc(), f_puts and f_printf(). +/ +/ 0: ANSI/OEM +/ 1: UTF-16LE +/ 2: UTF-16BE +/ 3: UTF-8 +/ +/ When _LFN_UNICODE is 0, this option has no effect. */ + + +#define _FS_RPATH 0 +/* This option configures relative path feature. +/ +/ 0: Disable relative path feature and remove related functions. +/ 1: Enable relative path feature. f_chdir() and f_chdrive() are available. +/ 2: f_getcwd() function is available in addition to 1. +/ +/ Note that directory items read via f_readdir() are affected by this option. */ + + +/*---------------------------------------------------------------------------/ +/ Drive/Volume Configurations +/---------------------------------------------------------------------------*/ + +#define _VOLUMES 1 +/* Number of volumes (logical drives) to be used. */ + + +#define _STR_VOLUME_ID 0 +#define _VOLUME_STRS "RAM","NAND","CF","SD1","SD2","USB1","USB2","USB3" +/* _STR_VOLUME_ID option switches string volume ID feature. +/ When _STR_VOLUME_ID is set to 1, also pre-defined strings can be used as drive +/ number in the path name. _VOLUME_STRS defines the drive ID strings for each +/ logical drives. Number of items must be equal to _VOLUMES. Valid characters for +/ the drive ID strings are: A-Z and 0-9. */ + + +#define _MULTI_PARTITION 0 +/* This option switches multi-partition feature. By default (0), each logical drive +/ number is bound to the same physical drive number and only an FAT volume found on +/ the physical drive will be mounted. When multi-partition feature is enabled (1), +/ each logical drive number is bound to arbitrary physical drive and partition +/ listed in the VolToPart[]. Also f_fdisk() funciton will be available. */ + + +#define _MIN_SS 512 +#define _MAX_SS 512 +/* These options configure the range of sector size to be supported. (512, 1024, +/ 2048 or 4096) Always set both 512 for most systems, all type of memory cards and +/ harddisk. But a larger value may be required for on-board flash memory and some +/ type of optical media. When _MAX_SS is larger than _MIN_SS, FatFs is configured +/ to variable sector size and GET_SECTOR_SIZE command must be implemented to the +/ disk_ioctl() function. */ + + +#define _USE_TRIM 0 +/* This option switches ATA-TRIM feature. (0:Disable or 1:Enable) +/ To enable Trim feature, also CTRL_TRIM command should be implemented to the +/ disk_ioctl() function. */ + + +#define _FS_NOFSINFO 0 +/* If you need to know correct free space on the FAT32 volume, set bit 0 of this +/ option, and f_getfree() function at first time after volume mount will force +/ a full FAT scan. Bit 1 controls the use of last allocated cluster number. +/ +/ bit0=0: Use free cluster count in the FSINFO if available. +/ bit0=1: Do not trust free cluster count in the FSINFO. +/ bit1=0: Use last allocated cluster number in the FSINFO if available. +/ bit1=1: Do not trust last allocated cluster number in the FSINFO. +*/ + + + +/*---------------------------------------------------------------------------/ +/ System Configurations +/---------------------------------------------------------------------------*/ + +#define _FS_TINY 0 +/* This option switches tiny buffer configuration. (0:Normal or 1:Tiny) +/ At the tiny configuration, size of the file object (FIL) is reduced _MAX_SS +/ bytes. Instead of private sector buffer eliminated from the file object, +/ common sector buffer in the file system object (FATFS) is used for the file +/ data transfer. */ + + +#define _FS_NORTC 0 +#define _NORTC_MON 1 +#define _NORTC_MDAY 1 +#define _NORTC_YEAR 2015 +/* The _FS_NORTC option switches timestamp feature. If the system does not have +/ an RTC function or valid timestamp is not needed, set _FS_NORTC to 1 to disable +/ the timestamp feature. All objects modified by FatFs will have a fixed timestamp +/ defined by _NORTC_MON, _NORTC_MDAY and _NORTC_YEAR. +/ When timestamp feature is enabled (_FS_NORTC == 0), get_fattime() function need +/ to be added to the project to read current time form RTC. _NORTC_MON, +/ _NORTC_MDAY and _NORTC_YEAR have no effect. +/ These options have no effect at read-only configuration (_FS_READONLY == 1). */ + + +#define _FS_LOCK 0 +/* The _FS_LOCK option switches file lock feature to control duplicated file open +/ and illegal operation to open objects. This option must be 0 when _FS_READONLY +/ is 1. +/ +/ 0: Disable file lock feature. To avoid volume corruption, application program +/ should avoid illegal open, remove and rename to the open objects. +/ >0: Enable file lock feature. The value defines how many files/sub-directories +/ can be opened simultaneously under file lock control. Note that the file +/ lock feature is independent of re-entrancy. */ + + +#define _FS_REENTRANT 0 +#define _FS_TIMEOUT 1000 +#define _SYNC_t HANDLE +/* The _FS_REENTRANT option switches the re-entrancy (thread safe) of the FatFs +/ module itself. Note that regardless of this option, file access to different +/ volume is always re-entrant and volume control functions, f_mount(), f_mkfs() +/ and f_fdisk() function, are always not re-entrant. Only file/directory access +/ to the same volume is under control of this feature. +/ +/ 0: Disable re-entrancy. _FS_TIMEOUT and _SYNC_t have no effect. +/ 1: Enable re-entrancy. Also user provided synchronization handlers, +/ ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj() +/ function, must be added to the project. Samples are available in +/ option/syscall.c. +/ +/ The _FS_TIMEOUT defines timeout period in unit of time tick. +/ The _SYNC_t defines O/S dependent sync object type. e.g. HANDLE, ID, OS_EVENT*, +/ SemaphoreHandle_t and etc.. A header file for O/S definitions needs to be +/ included somewhere in the scope of ff.c. */ + + +#define _WORD_ACCESS 0 +/* The _WORD_ACCESS option is an only platform dependent option. It defines +/ which access method is used to the word data on the FAT volume. +/ +/ 0: Byte-by-byte access. Always compatible with all platforms. +/ 1: Word access. Do not choose this unless under both the following conditions. +/ +/ * Address misaligned memory access is always allowed to ALL instructions. +/ * Byte order on the memory is little-endian. +/ +/ If it is the case, _WORD_ACCESS can also be set to 1 to reduce code size. +/ Following table shows allowable settings of some type of processors. +/ +/ ARM7TDMI 0 *2 ColdFire 0 *1 V850E 0 *2 +/ Cortex-M3 0 *3 Z80 0/1 V850ES 0/1 +/ Cortex-M0 0 *2 x86 0/1 TLCS-870 0/1 +/ AVR 0/1 RX600(LE) 0/1 TLCS-900 0/1 +/ AVR32 0 *1 RL78 0 *2 R32C 0 *2 +/ PIC18 0/1 SH-2 0 *1 M16C 0/1 +/ PIC24 0 *2 H8S 0 *1 MSP430 0 *2 +/ PIC32 0 *1 H8/300H 0 *1 8051 0/1 +/ +/ *1:Big-endian. +/ *2:Unaligned memory access is not supported. +/ *3:Some compilers generate LDM/STM for mem_cpy function. +*/ + +#define FLUSH_ON_NEW_CLUSTER 0 /* Sync the file on every new cluster */ +#define FLUSH_ON_NEW_SECTOR 1 /* Sync the file on every new sector */ +/* Only one of these two defines needs to be set to 1. If both are set to 0 + the file is only sync when closed. + Clusters are group of sectors (eg: 8 sectors). Flushing on new cluster means + it would be less often than flushing on new sector. Sectors are generally + 512 Bytes long. */