The out-of-the-box demo application flashed on all display modules before they are shipped.
This is the software that is flashed on the LPC4088 Display Modules before they are shipped from Embedded Artists.
This project works on both the 4.3" and 5" display modules but requires different file systems to handle the different display resolutions.
For the 4.3" displays first drag-n-drop the media/fs_480_raw.fs5 (if you are using the new DAPLINK firmware use fs_480_raw.hex) file to the MBED drive and then drag-n-drop the demo itself. This way both the file system and software are up to date.
For the 5" displays first drag-n-drop the media/fs_800_raw.fsF (if you are using the new DAPLINK firmware use fs_800_raw.hex) file to the MBED drive and then drag-n-drop the demo itself. This way both the file system and software are up to date.
There is a prebuilt version of the demo binary here.
This is what it looks like on a 4.3" display:
The first slide from the Slideshow:
A couple of images from the Image Viewer
File content as of revision 4:a7cbb22e4348:
/* * Copyright 2014 Embedded Artists AB * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef DM_BOARD_CONFIG_H #define DM_BOARD_CONFIG_H // Template to use for the project-specific settings. Copy this file to your project, // rename it to dm_board_config.h and uncomment the wanted features below: // #define DM_BOARD_USE_USB_DEVICE // #define DM_BOARD_USE_USB_HOST // #define DM_BOARD_USE_MCI_FS #define DM_BOARD_USE_QSPI_FS // #define DM_BOARD_USE_QSPI #define DM_BOARD_USE_DISPLAY #define DM_BOARD_USE_TOUCH // #define DM_BOARD_USE_ETHERNET #define DM_BOARD_USE_FAST_UART // #define DM_BOARD_USE_USBSERIAL_IN_RTOSLOG // #define DM_BOARD_DISABLE_STANDARD_PRINTF // #define DM_BOARD_ENABLE_MEASSURING_PINS #define DM_BOARD_USE_REGISTRY #endif