ELEC2645 (2018/19) / Mbed 2 deprecated el17ph

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Dependencies:   mbed

N5110/N5110.cpp@1:679d7ada8de7, 2019-05-12 (annotated)

Committer:
el17ph
Date:
Sun May 12 13:43:27 2019 +0000
Revision:
1:679d7ada8de7
Parent:
0:8fb740fa6356 
el17ph

Who changed what in which revision?

UserRevisionLine numberNew contents of line
el17ph 0:8fb740fa6356 1 #include "mbed.h"
el17ph 0:8fb740fa6356 2 #include "N5110.h"
el17ph 0:8fb740fa6356 3
el17ph 0:8fb740fa6356 4 // overloaded constructor includes power pin - LCD Vcc connected to GPIO pin
el17ph 0:8fb740fa6356 5 // this constructor works fine with LPC1768 - enough current sourced from GPIO
el17ph 0:8fb740fa6356 6 // to power LCD. Doesn't work well with K64F.
el17ph 0:8fb740fa6356 7 N5110::N5110(PinName const pwrPin,
el17ph 0:8fb740fa6356 8 PinName const scePin,
el17ph 0:8fb740fa6356 9 PinName const rstPin,
el17ph 0:8fb740fa6356 10 PinName const dcPin,
el17ph 0:8fb740fa6356 11 PinName const mosiPin,
el17ph 0:8fb740fa6356 12 PinName const sclkPin,
el17ph 0:8fb740fa6356 13 PinName const ledPin)
el17ph 0:8fb740fa6356 14 :
el17ph 0:8fb740fa6356 15 _spi(new SPI(mosiPin,NC,sclkPin)), // create new SPI instance and initialise
el17ph 0:8fb740fa6356 16 _led(new PwmOut(ledPin)),
el17ph 0:8fb740fa6356 17 _pwr(new DigitalOut(pwrPin)),
el17ph 0:8fb740fa6356 18 _sce(new DigitalOut(scePin)),
el17ph 0:8fb740fa6356 19 _rst(new DigitalOut(rstPin)),
el17ph 0:8fb740fa6356 20 _dc(new DigitalOut(dcPin))
el17ph 0:8fb740fa6356 21 {}
el17ph 0:8fb740fa6356 22
el17ph 0:8fb740fa6356 23 // overloaded constructor does not include power pin - LCD Vcc must be tied to +3V3
el17ph 0:8fb740fa6356 24 // Best to use this with K64F as the GPIO hasn't sufficient output current to reliably
el17ph 0:8fb740fa6356 25 // drive the LCD.
el17ph 0:8fb740fa6356 26 N5110::N5110(PinName const scePin,
el17ph 0:8fb740fa6356 27 PinName const rstPin,
el17ph 0:8fb740fa6356 28 PinName const dcPin,
el17ph 0:8fb740fa6356 29 PinName const mosiPin,
el17ph 0:8fb740fa6356 30 PinName const sclkPin,
el17ph 0:8fb740fa6356 31 PinName const ledPin)
el17ph 0:8fb740fa6356 32 :
el17ph 0:8fb740fa6356 33 _spi(new SPI(mosiPin,NC,sclkPin)), // create new SPI instance and initialise
el17ph 0:8fb740fa6356 34 _led(new PwmOut(ledPin)),
el17ph 0:8fb740fa6356 35 _pwr(NULL), // pwr not needed so null it to be safe
el17ph 0:8fb740fa6356 36 _sce(new DigitalOut(scePin)),
el17ph 0:8fb740fa6356 37 _rst(new DigitalOut(rstPin)),
el17ph 0:8fb740fa6356 38 _dc(new DigitalOut(dcPin))
el17ph 0:8fb740fa6356 39 {}
el17ph 0:8fb740fa6356 40
el17ph 0:8fb740fa6356 41 N5110::~N5110()
el17ph 0:8fb740fa6356 42 {
el17ph 0:8fb740fa6356 43 delete _spi;
el17ph 0:8fb740fa6356 44
el17ph 0:8fb740fa6356 45 if(_pwr) {
el17ph 0:8fb740fa6356 46 delete _pwr;
el17ph 0:8fb740fa6356 47 }
el17ph 0:8fb740fa6356 48
el17ph 0:8fb740fa6356 49 delete _led;
el17ph 0:8fb740fa6356 50 delete _sce;
el17ph 0:8fb740fa6356 51 delete _rst;
el17ph 0:8fb740fa6356 52 delete _dc;
el17ph 0:8fb740fa6356 53 }
el17ph 0:8fb740fa6356 54
el17ph 0:8fb740fa6356 55 // initialise function - powers up and sends the initialisation commands
el17ph 0:8fb740fa6356 56 void N5110::init()
el17ph 0:8fb740fa6356 57 {
el17ph 0:8fb740fa6356 58 turnOn(); // power up
el17ph 0:8fb740fa6356 59 reset(); // reset LCD - must be done within 100 ms
el17ph 0:8fb740fa6356 60 initSPI();
el17ph 0:8fb740fa6356 61
el17ph 0:8fb740fa6356 62 setContrast(0.55); // this may need tuning (say 0.4 to 0.6)
el17ph 0:8fb740fa6356 63 setBias(3); // datasheet - 48:1 mux - don't mess with if you don't know what you're doing! (0 to 7)
el17ph 0:8fb740fa6356 64 setTempCoefficient(0); // datasheet - may need increasing (range 0 to 3) at very low temperatures
el17ph 0:8fb740fa6356 65 normalMode(); // normal video mode by default
el17ph 0:8fb740fa6356 66
el17ph 0:8fb740fa6356 67 clearRAM(); // RAM is undefined at power-up so clear to be sure
el17ph 0:8fb740fa6356 68 clear(); // clear buffer
el17ph 0:8fb740fa6356 69 setBrightness(0.5);
el17ph 0:8fb740fa6356 70 }
el17ph 0:8fb740fa6356 71
el17ph 0:8fb740fa6356 72 // sets normal video mode (black on white)
el17ph 0:8fb740fa6356 73 void N5110::normalMode()
el17ph 0:8fb740fa6356 74 {
el17ph 0:8fb740fa6356 75 sendCommand(0b00100000); // basic instruction
el17ph 0:8fb740fa6356 76 sendCommand(0b00001100); // normal video mode- datasheet
el17ph 0:8fb740fa6356 77 }
el17ph 0:8fb740fa6356 78
el17ph 0:8fb740fa6356 79 // sets normal video mode (white on black)
el17ph 0:8fb740fa6356 80 void N5110::inverseMode()
el17ph 0:8fb740fa6356 81 {
el17ph 0:8fb740fa6356 82 sendCommand(0b00100000); // basic instruction
el17ph 0:8fb740fa6356 83 sendCommand(0b00001101); // inverse video mode - datasheet
el17ph 0:8fb740fa6356 84 }
el17ph 0:8fb740fa6356 85
el17ph 0:8fb740fa6356 86 // function to power up the LCD and backlight - only works when using GPIO to power
el17ph 0:8fb740fa6356 87 void N5110::turnOn()
el17ph 0:8fb740fa6356 88 {
el17ph 0:8fb740fa6356 89 if (_pwr != NULL) {
el17ph 0:8fb740fa6356 90 _pwr->write(1); // apply power
el17ph 0:8fb740fa6356 91 }
el17ph 0:8fb740fa6356 92 }
el17ph 0:8fb740fa6356 93
el17ph 0:8fb740fa6356 94 // function to power down LCD
el17ph 0:8fb740fa6356 95 void N5110::turnOff()
el17ph 0:8fb740fa6356 96 {
el17ph 0:8fb740fa6356 97 clear(); // clear buffer
el17ph 0:8fb740fa6356 98 refresh();
el17ph 0:8fb740fa6356 99 setBrightness(0.0); // turn backlight off
el17ph 0:8fb740fa6356 100 clearRAM(); // clear RAM to ensure specified current consumption
el17ph 0:8fb740fa6356 101 // send command to ensure we are in basic mode
el17ph 0:8fb740fa6356 102
el17ph 0:8fb740fa6356 103 sendCommand(0b00100000); // basic mode
el17ph 0:8fb740fa6356 104 sendCommand(0b00001000); // clear display
el17ph 0:8fb740fa6356 105 sendCommand(0b00100001); // extended mode
el17ph 0:8fb740fa6356 106 sendCommand(0b00100100); // power down
el17ph 0:8fb740fa6356 107
el17ph 0:8fb740fa6356 108 // if we are powering the LCD using the GPIO then make it low to turn off
el17ph 0:8fb740fa6356 109 if (_pwr != NULL) {
el17ph 0:8fb740fa6356 110 wait_ms(10); // small delay and then turn off the power pin
el17ph 0:8fb740fa6356 111 _pwr->write(0); // turn off power
el17ph 0:8fb740fa6356 112 }
el17ph 0:8fb740fa6356 113
el17ph 0:8fb740fa6356 114 }
el17ph 0:8fb740fa6356 115
el17ph 0:8fb740fa6356 116 // function to change LED backlight brightness
el17ph 0:8fb740fa6356 117 void N5110::setBrightness(float brightness)
el17ph 0:8fb740fa6356 118 {
el17ph 0:8fb740fa6356 119 // check whether brightness is within range
el17ph 0:8fb740fa6356 120 if (brightness < 0.0f)
el17ph 0:8fb740fa6356 121 brightness = 0.0f;
el17ph 0:8fb740fa6356 122 if (brightness > 1.0f)
el17ph 0:8fb740fa6356 123 brightness = 1.0f;
el17ph 0:8fb740fa6356 124 // set PWM duty cycle
el17ph 0:8fb740fa6356 125 _led->write(brightness);
el17ph 0:8fb740fa6356 126 }
el17ph 0:8fb740fa6356 127
el17ph 0:8fb740fa6356 128 void N5110::setContrast(float contrast) {
el17ph 0:8fb740fa6356 129
el17ph 0:8fb740fa6356 130 // enforce limits
el17ph 0:8fb740fa6356 131 if (contrast > 1.0f)
el17ph 0:8fb740fa6356 132 contrast = 1.0f;
el17ph 0:8fb740fa6356 133 else if (contrast < 0.0f)
el17ph 0:8fb740fa6356 134 contrast = 0.0;
el17ph 0:8fb740fa6356 135
el17ph 0:8fb740fa6356 136 // convert to char in range 0 to 127 (i.e. 6 bits)
el17ph 0:8fb740fa6356 137 char ic = char(contrast*127.0f);
el17ph 0:8fb740fa6356 138
el17ph 0:8fb740fa6356 139 sendCommand(0b00100001); // extended instruction set
el17ph 0:8fb740fa6356 140 sendCommand(0b10000000 | ic); // set Vop (which controls contrast)
el17ph 0:8fb740fa6356 141 sendCommand(0b00100000); // back to basic instruction set
el17ph 0:8fb740fa6356 142 }
el17ph 0:8fb740fa6356 143
el17ph 0:8fb740fa6356 144 void N5110::setTempCoefficient(char tc) {
el17ph 0:8fb740fa6356 145
el17ph 0:8fb740fa6356 146 // enforce limits
el17ph 0:8fb740fa6356 147 if (tc>3) {
el17ph 0:8fb740fa6356 148 tc=3;
el17ph 0:8fb740fa6356 149 }
el17ph 0:8fb740fa6356 150
el17ph 0:8fb740fa6356 151 // temperature coefficient may need increasing at low temperatures
el17ph 0:8fb740fa6356 152
el17ph 0:8fb740fa6356 153 sendCommand(0b00100001); // extended instruction set
el17ph 0:8fb740fa6356 154 sendCommand(0b00000100 | tc);
el17ph 0:8fb740fa6356 155 sendCommand(0b00100000); // back to basic instruction set
el17ph 0:8fb740fa6356 156 }
el17ph 0:8fb740fa6356 157
el17ph 0:8fb740fa6356 158 void N5110::setBias(char bias) {
el17ph 0:8fb740fa6356 159
el17ph 0:8fb740fa6356 160 // from data sheet
el17ph 0:8fb740fa6356 161 // bias mux rate
el17ph 0:8fb740fa6356 162 // 0 1:100
el17ph 0:8fb740fa6356 163 // 1 1:80
el17ph 0:8fb740fa6356 164 // 2 1:65
el17ph 0:8fb740fa6356 165 // 3 1:48 (default)
el17ph 0:8fb740fa6356 166 // 4 1:40/1:34
el17ph 0:8fb740fa6356 167 // 5 1:24
el17ph 0:8fb740fa6356 168 // 6 1:18/1:16
el17ph 0:8fb740fa6356 169 // 7 1:10/1:9/1:8
el17ph 0:8fb740fa6356 170
el17ph 0:8fb740fa6356 171 // enforce limits
el17ph 0:8fb740fa6356 172 if (bias>7) {
el17ph 0:8fb740fa6356 173 bias=7;
el17ph 0:8fb740fa6356 174 }
el17ph 0:8fb740fa6356 175
el17ph 0:8fb740fa6356 176 sendCommand(0b00100001); // extended mode instruction
el17ph 0:8fb740fa6356 177 sendCommand(0b00010000 | bias);
el17ph 0:8fb740fa6356 178 sendCommand(0b00100000); // end of extended mode instruction
el17ph 0:8fb740fa6356 179 }
el17ph 0:8fb740fa6356 180
el17ph 0:8fb740fa6356 181 // pulse the active low reset line
el17ph 0:8fb740fa6356 182 void N5110::reset()
el17ph 0:8fb740fa6356 183 {
el17ph 0:8fb740fa6356 184 _rst->write(0); // reset the LCD
el17ph 0:8fb740fa6356 185 _rst->write(1);
el17ph 0:8fb740fa6356 186 }
el17ph 0:8fb740fa6356 187
el17ph 0:8fb740fa6356 188 // function to initialise SPI peripheral
el17ph 0:8fb740fa6356 189 void N5110::initSPI()
el17ph 0:8fb740fa6356 190 {
el17ph 0:8fb740fa6356 191 _spi->format(8,1); // 8 bits, Mode 1 - polarity 0, phase 1 - base value of clock is 0, data captured on falling edge/propagated on rising edge
el17ph 0:8fb740fa6356 192 _spi->frequency(4000000); // maximum of screen is 4 MHz
el17ph 0:8fb740fa6356 193 }
el17ph 0:8fb740fa6356 194
el17ph 0:8fb740fa6356 195 // send a command to the display
el17ph 0:8fb740fa6356 196 void N5110::sendCommand(unsigned char command)
el17ph 0:8fb740fa6356 197 {
el17ph 0:8fb740fa6356 198 _dc->write(0); // set DC low for command
el17ph 0:8fb740fa6356 199 _sce->write(0); // set CE low to begin frame
el17ph 0:8fb740fa6356 200 _spi->write(command); // send command
el17ph 0:8fb740fa6356 201 _dc->write(1); // turn back to data by default
el17ph 0:8fb740fa6356 202 _sce->write(1); // set CE high to end frame (expected for transmission of single byte)
el17ph 0:8fb740fa6356 203 }
el17ph 0:8fb740fa6356 204
el17ph 0:8fb740fa6356 205 // send data to the display at the current XY address
el17ph 0:8fb740fa6356 206 // dc is set to 1 (i.e. data) after sending a command and so should
el17ph 0:8fb740fa6356 207 // be the default mode.
el17ph 0:8fb740fa6356 208 void N5110::sendData(unsigned char data)
el17ph 0:8fb740fa6356 209 {
el17ph 0:8fb740fa6356 210 _sce->write(0); // set CE low to begin frame
el17ph 0:8fb740fa6356 211 _spi->write(data);
el17ph 0:8fb740fa6356 212 _sce->write(1); // set CE high to end frame (expected for transmission of single byte)
el17ph 0:8fb740fa6356 213 }
el17ph 0:8fb740fa6356 214
el17ph 0:8fb740fa6356 215 // this function writes 0 to the 504 bytes to clear the RAM
el17ph 0:8fb740fa6356 216 void N5110::clearRAM()
el17ph 0:8fb740fa6356 217 {
el17ph 0:8fb740fa6356 218 _sce->write(0); //set CE low to begin frame
el17ph 0:8fb740fa6356 219 for(int i = 0; i < WIDTH * HEIGHT; i++) { // 48 x 84 bits = 504 bytes
el17ph 0:8fb740fa6356 220 _spi->write(0x00); // send 0's
el17ph 0:8fb740fa6356 221 }
el17ph 0:8fb740fa6356 222 _sce->write(1); // set CE high to end frame
el17ph 0:8fb740fa6356 223 }
el17ph 0:8fb740fa6356 224
el17ph 0:8fb740fa6356 225 // function to set the XY address in RAM for subsequenct data write
el17ph 0:8fb740fa6356 226 void N5110::setXYAddress(unsigned int const x,
el17ph 0:8fb740fa6356 227 unsigned int const y)
el17ph 0:8fb740fa6356 228 {
el17ph 0:8fb740fa6356 229 if (x<WIDTH && y<HEIGHT) { // check within range
el17ph 0:8fb740fa6356 230 sendCommand(0b00100000); // basic instruction
el17ph 0:8fb740fa6356 231 sendCommand(0b10000000 | x); // send addresses to display with relevant mask
el17ph 0:8fb740fa6356 232 sendCommand(0b01000000 | y);
el17ph 0:8fb740fa6356 233 }
el17ph 0:8fb740fa6356 234 }
el17ph 0:8fb740fa6356 235
el17ph 0:8fb740fa6356 236 // These functions are used to set, clear and get the value of pixels in the display
el17ph 0:8fb740fa6356 237 // Pixels are addressed in the range of 0 to 47 (y) and 0 to 83 (x). The refresh()
el17ph 0:8fb740fa6356 238 // function must be called after set and clear in order to update the display
el17ph 0:8fb740fa6356 239 void N5110::setPixel(unsigned int const x,
el17ph 0:8fb740fa6356 240 unsigned int const y,
el17ph 0:8fb740fa6356 241 bool const state)
el17ph 0:8fb740fa6356 242 {
el17ph 0:8fb740fa6356 243 if (x<WIDTH && y<HEIGHT) { // check within range
el17ph 0:8fb740fa6356 244 // calculate bank and shift 1 to required position in the data byte
el17ph 0:8fb740fa6356 245 if(state) buffer[x][y/8] |= (1 << y%8);
el17ph 0:8fb740fa6356 246 else buffer[x][y/8] &= ~(1 << y%8);
el17ph 0:8fb740fa6356 247 }
el17ph 0:8fb740fa6356 248 }
el17ph 0:8fb740fa6356 249
el17ph 0:8fb740fa6356 250 void N5110::clearPixel(unsigned int const x,
el17ph 0:8fb740fa6356 251 unsigned int const y)
el17ph 0:8fb740fa6356 252 {
el17ph 0:8fb740fa6356 253 if (x<WIDTH && y<HEIGHT) { // check within range
el17ph 0:8fb740fa6356 254 // calculate bank and shift 1 to required position (using bit clear)
el17ph 0:8fb740fa6356 255 buffer[x][y/8] &= ~(1 << y%8);
el17ph 0:8fb740fa6356 256 }
el17ph 0:8fb740fa6356 257 }
el17ph 0:8fb740fa6356 258
el17ph 0:8fb740fa6356 259 int N5110::getPixel(unsigned int const x,
el17ph 0:8fb740fa6356 260 unsigned int const y) const
el17ph 0:8fb740fa6356 261 {
el17ph 0:8fb740fa6356 262 if (x<WIDTH && y<HEIGHT) { // check within range
el17ph 0:8fb740fa6356 263 // return relevant bank and mask required bit
el17ph 0:8fb740fa6356 264
el17ph 0:8fb740fa6356 265 int pixel = (int) buffer[x][y/8] & (1 << y%8);
el17ph 0:8fb740fa6356 266
el17ph 0:8fb740fa6356 267 if (pixel)
el17ph 0:8fb740fa6356 268 return 1;
el17ph 0:8fb740fa6356 269 else
el17ph 0:8fb740fa6356 270 return 0;
el17ph 0:8fb740fa6356 271 }
el17ph 0:8fb740fa6356 272
el17ph 0:8fb740fa6356 273 return 0;
el17ph 0:8fb740fa6356 274
el17ph 0:8fb740fa6356 275 }
el17ph 0:8fb740fa6356 276
el17ph 0:8fb740fa6356 277 // function to refresh the display
el17ph 0:8fb740fa6356 278 void N5110::refresh()
el17ph 0:8fb740fa6356 279 {
el17ph 0:8fb740fa6356 280 setXYAddress(0,0); // important to set address back to 0,0 before refreshing display
el17ph 0:8fb740fa6356 281 // address auto increments after printing string, so buffer[0][0] will not coincide
el17ph 0:8fb740fa6356 282 // with top-left pixel after priting string
el17ph 0:8fb740fa6356 283
el17ph 0:8fb740fa6356 284 _sce->write(0); //set CE low to begin frame
el17ph 0:8fb740fa6356 285
el17ph 0:8fb740fa6356 286 for(int j = 0; j < BANKS; j++) { // be careful to use correct order (j,i) for horizontal addressing
el17ph 0:8fb740fa6356 287 for(int i = 0; i < WIDTH; i++) {
el17ph 0:8fb740fa6356 288 _spi->write(buffer[i][j]); // send buffer
el17ph 0:8fb740fa6356 289 }
el17ph 0:8fb740fa6356 290 }
el17ph 0:8fb740fa6356 291 _sce->write(1); // set CE high to end frame
el17ph 0:8fb740fa6356 292
el17ph 0:8fb740fa6356 293 }
el17ph 0:8fb740fa6356 294
el17ph 0:8fb740fa6356 295 // fills the buffer with random bytes. Can be used to test the display.
el17ph 0:8fb740fa6356 296 // The rand() function isn't seeded so it probably creates the same pattern everytime
el17ph 0:8fb740fa6356 297 void N5110::randomiseBuffer()
el17ph 0:8fb740fa6356 298 {
el17ph 0:8fb740fa6356 299 int i,j;
el17ph 0:8fb740fa6356 300 for(j = 0; j < BANKS; j++) { // be careful to use correct order (j,i) for horizontal addressing
el17ph 0:8fb740fa6356 301 for(i = 0; i < WIDTH; i++) {
el17ph 0:8fb740fa6356 302 buffer[i][j] = rand()%256; // generate random byte
el17ph 0:8fb740fa6356 303 }
el17ph 0:8fb740fa6356 304 }
el17ph 0:8fb740fa6356 305
el17ph 0:8fb740fa6356 306 }
el17ph 0:8fb740fa6356 307
el17ph 0:8fb740fa6356 308 // function to print 5x7 font
el17ph 0:8fb740fa6356 309 void N5110::printChar(char const c,
el17ph 0:8fb740fa6356 310 unsigned int const x,
el17ph 0:8fb740fa6356 311 unsigned int const y)
el17ph 0:8fb740fa6356 312 {
el17ph 0:8fb740fa6356 313 if (y<BANKS) { // check if printing in range of y banks
el17ph 0:8fb740fa6356 314
el17ph 0:8fb740fa6356 315 for (int i = 0; i < 5 ; i++ ) {
el17ph 0:8fb740fa6356 316 int pixel_x = x+i;
el17ph 0:8fb740fa6356 317 if (pixel_x > WIDTH-1) // ensure pixel isn't outside the buffer size (0 - 83)
el17ph 0:8fb740fa6356 318 break;
el17ph 0:8fb740fa6356 319 buffer[pixel_x][y] = font5x7[(c - 32)*5 + i];
el17ph 0:8fb740fa6356 320 // array is offset by 32 relative to ASCII, each character is 5 pixels wide
el17ph 0:8fb740fa6356 321 }
el17ph 0:8fb740fa6356 322
el17ph 0:8fb740fa6356 323 }
el17ph 0:8fb740fa6356 324 }
el17ph 0:8fb740fa6356 325
el17ph 0:8fb740fa6356 326 // function to print string at specified position
el17ph 0:8fb740fa6356 327 void N5110::printString(const char *str,
el17ph 0:8fb740fa6356 328 unsigned int const x,
el17ph 0:8fb740fa6356 329 unsigned int const y)
el17ph 0:8fb740fa6356 330 {
el17ph 0:8fb740fa6356 331 if (y<BANKS) { // check if printing in range of y banks
el17ph 0:8fb740fa6356 332
el17ph 0:8fb740fa6356 333 int n = 0 ; // counter for number of characters in string
el17ph 0:8fb740fa6356 334 // loop through string and print character
el17ph 0:8fb740fa6356 335 while(*str) {
el17ph 0:8fb740fa6356 336
el17ph 0:8fb740fa6356 337 // writes the character bitmap data to the buffer, so that
el17ph 0:8fb740fa6356 338 // text and pixels can be displayed at the same time
el17ph 0:8fb740fa6356 339 for (int i = 0; i < 5 ; i++ ) {
el17ph 0:8fb740fa6356 340 int pixel_x = x+i+n*6;
el17ph 0:8fb740fa6356 341 if (pixel_x > WIDTH-1) // ensure pixel isn't outside the buffer size (0 - 83)
el17ph 0:8fb740fa6356 342 break;
el17ph 0:8fb740fa6356 343 buffer[pixel_x][y] = font5x7[(*str - 32)*5 + i];
el17ph 0:8fb740fa6356 344 }
el17ph 0:8fb740fa6356 345 str++; // go to next character in string
el17ph 0:8fb740fa6356 346 n++; // increment index
el17ph 0:8fb740fa6356 347 }
el17ph 0:8fb740fa6356 348 }
el17ph 0:8fb740fa6356 349 }
el17ph 0:8fb740fa6356 350
el17ph 0:8fb740fa6356 351 // function to clear the screen buffer
el17ph 0:8fb740fa6356 352 void N5110::clear()
el17ph 0:8fb740fa6356 353 {
el17ph 0:8fb740fa6356 354 memset(buffer,0,sizeof(buffer));
el17ph 0:8fb740fa6356 355 }
el17ph 0:8fb740fa6356 356
el17ph 0:8fb740fa6356 357 // function to plot array on display
el17ph 0:8fb740fa6356 358 void N5110::plotArray(float const array[])
el17ph 0:8fb740fa6356 359 {
el17ph 0:8fb740fa6356 360 for (int i=0; i<WIDTH; i++) { // loop through array
el17ph 0:8fb740fa6356 361 // elements are normalised from 0.0 to 1.0, so multiply
el17ph 0:8fb740fa6356 362 // by 47 to convert to pixel range, and subtract from 47
el17ph 0:8fb740fa6356 363 // since top-left is 0,0 in the display geometry
el17ph 0:8fb740fa6356 364 setPixel(i,47 - int(array[i]*47.0f),true);
el17ph 0:8fb740fa6356 365 }
el17ph 0:8fb740fa6356 366
el17ph 0:8fb740fa6356 367 }
el17ph 0:8fb740fa6356 368
el17ph 0:8fb740fa6356 369 // function to draw circle
el17ph 0:8fb740fa6356 370 void N5110:: drawCircle(unsigned int const x0,
el17ph 0:8fb740fa6356 371 unsigned int const y0,
el17ph 0:8fb740fa6356 372 unsigned int const radius,
el17ph 0:8fb740fa6356 373 FillType const fill)
el17ph 0:8fb740fa6356 374 {
el17ph 0:8fb740fa6356 375 // from http://en.wikipedia.org/wiki/Midpoint_circle_algorithm
el17ph 0:8fb740fa6356 376 int x = radius;
el17ph 0:8fb740fa6356 377 int y = 0;
el17ph 0:8fb740fa6356 378 int radiusError = 1-x;
el17ph 0:8fb740fa6356 379
el17ph 0:8fb740fa6356 380 while(x >= y) {
el17ph 0:8fb740fa6356 381
el17ph 0:8fb740fa6356 382 // if transparent, just draw outline
el17ph 0:8fb740fa6356 383 if (fill == FILL_TRANSPARENT) {
el17ph 0:8fb740fa6356 384 setPixel( x + x0, y + y0,true);
el17ph 0:8fb740fa6356 385 setPixel(-x + x0, y + y0,true);
el17ph 0:8fb740fa6356 386 setPixel( y + x0, x + y0,true);
el17ph 0:8fb740fa6356 387 setPixel(-y + x0, x + y0,true);
el17ph 0:8fb740fa6356 388 setPixel(-y + x0, -x + y0,true);
el17ph 0:8fb740fa6356 389 setPixel( y + x0, -x + y0,true);
el17ph 0:8fb740fa6356 390 setPixel( x + x0, -y + y0,true);
el17ph 0:8fb740fa6356 391 setPixel(-x + x0, -y + y0,true);
el17ph 0:8fb740fa6356 392 } else { // drawing filled circle, so draw lines between points at same y value
el17ph 0:8fb740fa6356 393
el17ph 0:8fb740fa6356 394 int type = (fill==FILL_BLACK) ? 1:0; // black or white fill
el17ph 0:8fb740fa6356 395
el17ph 0:8fb740fa6356 396 drawLine(x+x0,y+y0,-x+x0,y+y0,type);
el17ph 0:8fb740fa6356 397 drawLine(y+x0,x+y0,-y+x0,x+y0,type);
el17ph 0:8fb740fa6356 398 drawLine(y+x0,-x+y0,-y+x0,-x+y0,type);
el17ph 0:8fb740fa6356 399 drawLine(x+x0,-y+y0,-x+x0,-y+y0,type);
el17ph 0:8fb740fa6356 400 }
el17ph 0:8fb740fa6356 401
el17ph 0:8fb740fa6356 402 y++;
el17ph 0:8fb740fa6356 403 if (radiusError<0) {
el17ph 0:8fb740fa6356 404 radiusError += 2 * y + 1;
el17ph 0:8fb740fa6356 405 } else {
el17ph 0:8fb740fa6356 406 x--;
el17ph 0:8fb740fa6356 407 radiusError += 2 * (y - x) + 1;
el17ph 0:8fb740fa6356 408 }
el17ph 0:8fb740fa6356 409 }
el17ph 0:8fb740fa6356 410
el17ph 0:8fb740fa6356 411 }
el17ph 0:8fb740fa6356 412
el17ph 0:8fb740fa6356 413 void N5110::drawLine(unsigned int const x0,
el17ph 0:8fb740fa6356 414 unsigned int const y0,
el17ph 0:8fb740fa6356 415 unsigned int const x1,
el17ph 0:8fb740fa6356 416 unsigned int const y1,
el17ph 0:8fb740fa6356 417 unsigned int const type)
el17ph 0:8fb740fa6356 418 {
el17ph 0:8fb740fa6356 419 // Note that the ranges can be negative so we have to turn the input values
el17ph 0:8fb740fa6356 420 // into signed integers first
el17ph 0:8fb740fa6356 421 int const y_range = static_cast<int>(y1) - static_cast<int>(y0);
el17ph 0:8fb740fa6356 422 int const x_range = static_cast<int>(x1) - static_cast<int>(x0);
el17ph 0:8fb740fa6356 423
el17ph 0:8fb740fa6356 424 // if dotted line, set step to 2, else step is 1
el17ph 0:8fb740fa6356 425 unsigned int const step = (type==2) ? 2:1;
el17ph 0:8fb740fa6356 426
el17ph 0:8fb740fa6356 427 // make sure we loop over the largest range to get the most pixels on the display
el17ph 0:8fb740fa6356 428 // for instance, if drawing a vertical line (x_range = 0), we need to loop down the y pixels
el17ph 0:8fb740fa6356 429 // or else we'll only end up with 1 pixel in the x column
el17ph 0:8fb740fa6356 430 if ( abs(x_range) > abs(y_range) ) {
el17ph 0:8fb740fa6356 431
el17ph 0:8fb740fa6356 432 // ensure we loop from smallest to largest or else for-loop won't run as expected
el17ph 0:8fb740fa6356 433 unsigned int const start = x_range > 0 ? x0:x1;
el17ph 0:8fb740fa6356 434 unsigned int const stop = x_range > 0 ? x1:x0;
el17ph 0:8fb740fa6356 435
el17ph 0:8fb740fa6356 436 // loop between x pixels
el17ph 0:8fb740fa6356 437 for (unsigned int x = start; x<= stop ; x+=step) {
el17ph 0:8fb740fa6356 438 // do linear interpolation
el17ph 0:8fb740fa6356 439 int const dx = static_cast<int>(x)-static_cast<int>(x0);
el17ph 0:8fb740fa6356 440 unsigned int const y = y0 + y_range * dx / x_range;
el17ph 0:8fb740fa6356 441
el17ph 0:8fb740fa6356 442 // If the line type is '0', this will clear the pixel
el17ph 0:8fb740fa6356 443 // If it is '1' or '2', the pixel will be set
el17ph 0:8fb740fa6356 444 setPixel(x,y, type);
el17ph 0:8fb740fa6356 445 }
el17ph 0:8fb740fa6356 446 } else {
el17ph 0:8fb740fa6356 447
el17ph 0:8fb740fa6356 448 // ensure we loop from smallest to largest or else for-loop won't run as expected
el17ph 0:8fb740fa6356 449 unsigned int const start = y_range > 0 ? y0:y1;
el17ph 0:8fb740fa6356 450 unsigned int const stop = y_range > 0 ? y1:y0;
el17ph 0:8fb740fa6356 451
el17ph 0:8fb740fa6356 452 for (unsigned int y = start; y<= stop ; y+=step) {
el17ph 0:8fb740fa6356 453 // do linear interpolation
el17ph 0:8fb740fa6356 454 int const dy = static_cast<int>(y)-static_cast<int>(y0);
el17ph 0:8fb740fa6356 455 unsigned int const x = x0 + x_range * dy / y_range;
el17ph 0:8fb740fa6356 456
el17ph 0:8fb740fa6356 457 // If the line type is '0', this will clear the pixel
el17ph 0:8fb740fa6356 458 // If it is '1' or '2', the pixel will be set
el17ph 0:8fb740fa6356 459 setPixel(x,y, type);
el17ph 0:8fb740fa6356 460 }
el17ph 0:8fb740fa6356 461 }
el17ph 0:8fb740fa6356 462
el17ph 0:8fb740fa6356 463 }
el17ph 0:8fb740fa6356 464
el17ph 0:8fb740fa6356 465 void N5110::drawRect(unsigned int const x0,
el17ph 0:8fb740fa6356 466 unsigned int const y0,
el17ph 0:8fb740fa6356 467 unsigned int const width,
el17ph 0:8fb740fa6356 468 unsigned int const height,
el17ph 0:8fb740fa6356 469 FillType const fill)
el17ph 0:8fb740fa6356 470 {
el17ph 0:8fb740fa6356 471 if (fill == FILL_TRANSPARENT) { // transparent, just outline
el17ph 0:8fb740fa6356 472 drawLine(x0,y0,x0+(width-1),y0,1); // top
el17ph 0:8fb740fa6356 473 drawLine(x0,y0+(height-1),x0+(width-1),y0+(height-1),1); // bottom
el17ph 0:8fb740fa6356 474 drawLine(x0,y0,x0,y0+(height-1),1); // left
el17ph 0:8fb740fa6356 475 drawLine(x0+(width-1),y0,x0+(width-1),y0+(height-1),1); // right
el17ph 0:8fb740fa6356 476 } else { // filled rectangle
el17ph 0:8fb740fa6356 477 int type = (fill==FILL_BLACK) ? 1:0; // black or white fill
el17ph 0:8fb740fa6356 478 for (int y = y0; y<y0+height; y++) { // loop through rows of rectangle
el17ph 0:8fb740fa6356 479 drawLine(x0,y,x0+(width-1),y,type); // draw line across screen
el17ph 0:8fb740fa6356 480 }
el17ph 0:8fb740fa6356 481 }
el17ph 0:8fb740fa6356 482 }
el17ph 0:8fb740fa6356 483
el17ph 0:8fb740fa6356 484 void N5110::drawSprite(int x0,
el17ph 0:8fb740fa6356 485 int y0,
el17ph 0:8fb740fa6356 486 int nrows,
el17ph 0:8fb740fa6356 487 int ncols,
el17ph 0:8fb740fa6356 488 int *sprite)
el17ph 0:8fb740fa6356 489 {
el17ph 0:8fb740fa6356 490 for (int i = 0; i < nrows; i++) {
el17ph 0:8fb740fa6356 491 for (int j = 0 ; j < ncols ; j++) {
el17ph 0:8fb740fa6356 492
el17ph 0:8fb740fa6356 493 int pixel = *((sprite+i*ncols)+j);
el17ph 0:8fb740fa6356 494 setPixel(x0+j,y0+i, pixel);
el17ph 0:8fb740fa6356 495 }
el17ph 0:8fb740fa6356 496 }
el17ph 0:8fb740fa6356 497 }